Maintenance Mode Does not end
We have an issue where MM never ends at the scheduled time. This just started happening about 2 days ago and we arent sure what caused it, but it looks like the stored procedures in SQL have stopped. So I'm looking for advice on how to start those back up.
We have OpsMgr 2007 r2 on server 2008 r2. SQL is 2008.
Thanks!
- Get on the floor, do that dinosaur
I was able to fix it by going onto one of the other management servers and putting the RMS into MM and then taking it out. I guess that somehow kicked off the stored procedures to start running.
I know that a management server cannot take itself out of MM, but it didnt look like it was even in MM. It was till being monitored as far as I can tell, it was in a warning state... but whatever.
- Get on the floor, do that dinosaur
Similar Messages
-
What it says in the title.
I have an older mac and it worked perfectly until about an hour ago when I shut it down because we needed the room dark for a presentation and the screen saver was putting out light.
Now it won't turn back on. It plays the start up music but the screen stays blank.
The CMD+OPT+R for recovery mode doesn't do anything, the keyboard is wireless so the command doesn't get to the computer and that's the only keyboard I have since that's the one it came with.
I'm looking at making a USB recovery disk but it says that I should click on "Options" in the Disk Utility but there is no options button or menu to click.
From here: OS X: About Recovery Disk Assistant in step 3 I get stuck.
Also it says that if I make a drive on this computer which has an older OS it might not work on the broken machine with Mavericks.
This machine literally worked and I turned it off and now it does not work and there seems to be nothing I can do... ***...kodemage wrote:
well, then recovery mode does not work. I've tried all the key combinations I've seen on line. Command+R, Command+Option+R, Command+Option+P+R, none of these work.
I don't believe there is anything we can do on a forum to help then, you need to take it into a AASP and have it professionaly diagnosed. If you don't know how to locate an AASP in your area you can begin by using Contact Apple for support and service
Good luck. -
Execution does not end even after all records updated..
Hi,
I have plsql code like :
declare
begin
for x in ( select .......) loop -- about 4000 times
for y in ( select ............) loop -- about 50 times
end loop;
-- some code goes here to manipulate clob data
-- like creating free temp clobs - use - then free them
-- Update statement that update some table using clob values.
insert into tablex values(sysdate);
commit;
end loop;
end;
Here I can monitor from other window howmany records are inserted into tablex and howmany updated in update statement by...
select count(1) from tablex;
After 50 mins i can see that all records are updated but...
plsql code does not end its execution it continues even after all records are updated..untill i have to kill the session or let be run for long time.. :(
I can not understand why this it is not ending execution..
What could be the problem ...Hi,
Here it is.....
declare
v_text_data TableA.text_data%type;
v_clob clob;
type dummyclob_t is table of clob index by binary_integer;
dummyclob dummyclob_t;
v_str varchar2(255) := 'ddfsajfdkeiueimnrmrrttrtr;trtkltwjkltjiu4i5u43iou43i5u4io54urnmlqwmreqwnrewmnrewmreqwnm,rewqnrewqrewqljlkj';
begin
select data bulk collect into dummyclob from sfdl_clob; -- five rows containing clob data upto 1MB
for x in (select object_id
from TableA
where object_type = 'STDTEXT' ) loop
dbms_lob.createtemporary(v_text_data,TRUE);
for y in (select '<IMG "MFI_7579(@CONTROL=' || ref_id || ',REF_ID=' || ref_id || ').@UDV">' temp_data
from TableB
where object_id = x.object_id) loop
v_text_data := v_text_data ||
case
when trunc(dbms_random.value(0,7)) = 0
then chr(10)
else v_str
end ||
y.temp_data;
end loop;
select text_data into v_clob from TableA where object_id = x.object_id for update;
if v_text_data is not null then
dbms_lob.append(v_clob,v_text_data);
end if;
dbms_lob.append(v_clob,dummyclob(trunc(dbms_random.value(1, 6))));
dbms_lob.freetemporary(v_text_data);
insert into xyz values (sysdate);
commit;
end loop;
end;
Thanks for your time..:)
Rushang. -
How to remove records in itab where its HKONT does not end in '0'...
Hello Experts,
I am getting records from BSIS and BSAS and I want to remove those records with
their HKONT(GL account) does not end in '0'(zero). I do now want to do it via a loop.
I tried using DELETE FROM ITAB statement but it seems it does not work.
Here is what I did:
IF NOT gt_bsis_bsas[] IS INITIAL.
DELETE gt_bsis_bsas WHERE hkont+10(0) <> '0'.
ENDIF.
Hope you can help me guys. Thank you and take care!Hi Viray,
'+' is a wildcard char which is used to represent one char
where as '*' represents any number of char's.
In this case +++++++++0
<b>means that the length of the field is 10 chars and first 9 can be anything</b>
he didn't use '*0' since it could mean that the length of the data entered can be anything .
Hope this clarifies
Regards
Nishant -
Excel process does not end properly
Hello All.
I am using excel in my program writing data into it an excel workbook and then later on reading data from it. I have written down the code of closing excel worlkbook and shutting down excel application hence releasing the handles for it. But when i do that i.e. when the code containing excel workbook closing and excel application shutting down executes, excel workbook is closed but excel process does not end properly and can be seen in the task manager. And when i repeatedly open the excel file through my front end interface and close the file, another excel process is added in the task manager which does not end and so on. What can be the problem and solution. Thanks in advance.
Best Regards.
Moshi.Interfacing to Excel via ActiveX may be tricky, ending in situations like the one you are facing now.
The basic principle is that every single handle opened to an Excel object (workbook, worksheet, range, variant and so on) must be closed properly for the entire process to terminate gracefully. If a reference remains unhandled at program end you will find an instance of Excel remaining in the task list and you may suffer erratic behaviour in subsequent accesses to the product.
You must double check all references and add approporiate dispose/close commands for every one of them.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos? -
Process does not end when binding a object to registry
I am writing a Unit Test case in which i need to create a datasource and bind it to RMI registry so that the methods i need to test can get a database connection . The problem is that after the test cases have finished running the process does not end and i have to shut it down manually . When i do not bind the datasource , the process ends put with errors because the methods do not get a connection. Even unbinding it after running the test cases does not help.
Edited by: gurpreetbhalla on Jun 25, 2009 11:56 AMpublic void testIntraDayForClient() throws Exception
ConstantConfig.JNDI_FACTORY = "com.sun.jndi.rmi.registry.RegistryContextFactory";
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.rmi.registry.RegistryContextFactory");
env.put(Context.PROVIDER_URL, "rmi:");
InitialContext ic = new InitialContext(env);
// Construct DataSource
SQLServerConnectionPoolDataSource ds = new SQLServerConnectionPoolDataSource();
ds.setURL("jdbc:sqlserver://10.200.41.201:1433;databaseName=TradeportTC");
ds.setUser("sa");
ds.setPassword("superuser");
DataSource d = ds;
ic.unbind("TCDB_JNDI");
ic.bind("TCDB_JNDI", ds);
HttpServletRequest req = new MockHttpRequest();
HttpServletResponse resp = EasyMock.createMock(HttpServletResponse.class);
ActionContext context = EasyMock.createMock(ActionContext.class);
HttpSession session = EasyMock.createMock(HttpSession.class);
EasyMock.expect(session.getAttribute("ZephyrUserName")).andReturn("sclient90");
EasyMock.expect(session.getAttribute("ZephyrDomainId")).andReturn("8a48a9cb1860e2a4011860e2c64d003a");
EasyMock.expect(session.getAttribute("isTrader")).andReturn(false);
EasyMock.expect(session.getAttribute("accountsDataDB")).andReturn(null);
EasyMock.expect(context.getSession()).andReturn(session).times(12);
session.setAttribute("vawTrades", null);
session.setAttribute("noOfDays", null);
session.setAttribute("accountNo", null);
session.setAttribute("exchange", null);
session.setAttribute("symbolName", null);
session.setAttribute("trCode", null);
session.setAttribute("status", null);
session.setAttribute("accountsDataDB", null);
EasyMock.replay(session);
EasyMock.replay(context);
MyOrdersAction action = new MyOrdersAction();
action.execute(req, resp, context);
This is the unit test case which does not exit , if i skip this binding ic.bind("TCDB_JNDI", ds);
then it exits normally with a failure, -
Clearing cache and cookies and restart in safe mode does not fix.
Hi castaway, you are using a old version of firefox . Please update it . goto '''Help->About Firefox''' and it will be automatically updated.
-
SM04 Session does not end.
Hi all,
I noted that SAP R/3 session does not automatically ended after a user logs off from the ESS Frontend. This will result in a increase in session in SM04 eventhough the users had logout from the portal.
I have adjusted some timeout parameter in transaction RZ10 in R/3 including rdisp/plugin_auto_logout and restarted the services. To test, i accessed the ESS Portal and access some IAC IVIEW. Thereafter, i logged off the portal and observed the session created in R/3 (SM04) and noted that the session including the RFC connections are not released at all.
Anyone face this issue before? How can i control so that after the user logoff from the portal, the session in SM04 is end.
Thanks in advanceHi Sean,
I found some note on the session which i attached below. However in my EP server have dozens of web.xml. Which one should i configure? Would you able to help me on this? Some of my IAC view does not end while some do. Any idea on that?
Specifying HTTP Session Timeout
Use
You can specify a timeout period for HTTP sessions created in your Web application. If the session is inactive for this timeout period, it is invalidated by the Web container.
If you do not specify such a timeout explicitly, a default one of 30 minutes is assumed.
You can configure the HTTP session timeout using the web.xml descriptor.
Procedure
On the web.xml screen, proceed as follows:
1. Open the General screen.
2. To specify the timeout period, enter a value in the Session configuration Session timeout field.
The value is specified in minutes. If you enter a negative value in this field, HTTP sessions are never terminated because of a timeout. Instead, only an explicit logout by the user will terminate the corresponding session. -
CM Repository created in fsdb mode does not displaying in KM Content
Dear KMC friends
CM Repository created in fsdb mode does not displaying in KM Content.
Any extra confiugration i need to do?
plz reply me
kanthahttps://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/284
Message was edited by:
Hadar Morchi -
Firefox sometimes does not end
14.7.2014
Firefox 30.0 (German version) under Win 8.1
Hello,
Sometimes Firefox does not end properly. When Firefox is re-started I get a message saying Firefox
is still running although about 10 minutes has passed between end and the re-start.
Only by killing Firefox in the Task Manager can cure this problem. I use firefox a lot and this occurs about 5 times a day.Firefox Keep running in background, that's why your getting this error
*http://kb.mozillazine.org/Firefox.exe_always_open
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
When using the "exit" from pekwm's menu, it does not end my Xsession...and gets stuck. Until I know how to get around that, I'm going to be sampling Openbox more.
Welcome to Apple Discussions.
If a program is not responding and you cannot "force quit" then you can launch Activity Monitor in Utilities. Under "my processes" you can choose that program and use the red "Quit process" icon at the upper left. That should do it rather than a restart.
But if many applications aren't responding both Apple and non-Apple there is a problem that should be sorted.
A good start would be to create a new account, name it "test" and see how your apps work in that User acct? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
Open System Preferences >> Accounts >> "+" make it an admin account.
Let us know and we'll troubleshoot this further.
-mj
[email protected] -
Digital ICE epson scan (professional mode) does not work
Hello,
I am running the latest Mountian Lion OS on my IMAC and have recently started running some test scans with my Epson Perfection V700 scanner. The supplied Epson software , Epson Scan offers a variety of operating modes, "professional mode" offering the most features. Professional mode offers Digital ICE as an option, however when selected, the Digital ICE does not work.I have compared scans with and without digital ICE and they are exactly the same. Scratches and dirt are not removed by the scan.
If I select a more basic mode ("Home Mode") Digital ICE does work. But this other mode does not offer the range of options offered in porfessional mode.
Has anyone out there used Epson Scan software? Has anyone else experienced this problem? Is there other scanning software out there which could fully exploit the features of the Epson scanner I have? I tried Vuescn and it does not seem to be compatible with my scanner, so that is off the table.
DeanYou should first read the user manual that came w/your scanner and/or contact Epson tech support.
How is the scanner connected to your iMac? USB cable? Wireless? Firewire?
Has anyone out there used Epson Scan software?
I have an Epson scanner. It only work when it's connected directly to my iMac via USB cable.
Has anyone else experienced this problem?
Initially.
Is there other scanning software out there which could fully exploit the features of the Epson scanner I have?
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print/scan
Sometimes, installing the GIMP drivers help with printing/scanning issues: http://gimp-print.sourceforge.net/MacOSX.php -
I have upgraded to latest IOS 7 software and the vibration on silent mode does not last long enough
I have upgraded to latest IOS 7 software and the vibration on silent mode does not last long enough
I think you're using a Lion developer version. Open > About this Mac > More Info, and copy Software here. Did you purchase Lion in the App Store?
-
Installing patch 5217019 takes long time and does not end
Hi,
I try to install patch 5217109 to my TEST instance.While installing patch the 8 workers are selected default.7 of workers are in statu of completed but 1 worker is waiting for long times and does not end.
What can be my problem?Start time for file is: Mon Aug 10 2009 11:45:01
sqlplus -s APPS/***** @/oracle/TEST/testappl/ad/11.5.0/admin/sql/adpcpcmp.pls APPLSYS &pw_fnd APPS &pw_apps &systempwd 8 1 NONE FALSE
Arguments are:
AOL_schema = APPLSYS, AOL_password = *****,
Schema_to_compile = APPS, Schema_to_compile_pw = *****,
SYSTEM_password = *****, Total_workers = 8, Logical_worker_num = 1
Object_type_to_not_compile = NONE
Use_stored_dependencies = FALSE
Connected.
Checking for previously-invalid objects which are now valid...
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.03
Commit complete.
Elapsed: 00:00:00.00
Deleting any errors from previous run of this logical worker
0 rows deleted.
Elapsed: 00:00:00.00
Commit complete.
Elapsed: 00:00:00.00
Compiling invalid objects... -
Hallo! I installed ios 6.0 to my iphone 4s, but the panoramic shooting mode does not appear. Tell me please what is the proplem?
Camera App>Options:
Maybe you are looking for
-
I changed my Apple ID on my mac. now when i try to sync my iPad, the user ID still is the emaill address of the OLD apple ID and it asks me for a password. I'd like for the message to have the NEW apple ID email and not the old, so that I can access
-
Sending file from server to client
I am creating a server that stores application updates. When the client connects the server send the update. The server is sending the file but the file is not complete, i.e, if the file is 317kb,its send 117kb. Below is the code i am using import ja
-
I am trying to connect my wireless printer to my wireless router. I need to find the following information. - SID - encryption code - if its a WEP or a WEPA2 how will I find the following information for my printer provider company? Please help thank
-
Hello Experts I am not able to find out PS1 Sales document type in VOV8. We are on ECC 5.0 .Any Customization task has to be done or is there any other alternative Document type Thanks a lot in Advance. Regards, Shareeq, Dubai. Message w
-
How to load series of images?
I am trying to load a sereies of pictures moving accross the top from right to left. How do I load all of these photos in such a way that they seem to be stitched together like a piece of film strip at certain rate going accross?