Major regression with Bluetooth and car: Total crash of the Pre!

HI!
I have a german GSM Pre and Bluetooth car connection worked fine with my 2007 Audi TT when I had webOS 1.1.3.
Now, after the update to 1.3.1, I can still connect to my car, but suddenly during driving, the Pre went completely dead. I was not on a call or anything, it just happened. I had to remove the battery to revive it.
Apparently, I am not the only one experiencing this, as I have read in another forum.
Thomas
Post relates to: None

If you're seeing " “POSIX error: Invalid argument” (NSPOSIXErrorDomain:22)"
you will see this if you have safari caching disabled... safari enhancer is prone to disabling this, w/o being asked to.
Take a look at home/library/caches/safari Do a get-info on the folder & see if it's locked. If it is, un-check the 'locked" box & try the site again.
It's a 100% repeatable problem for me, with your site & any other webpage uploads.

Similar Messages

BIWS with Breaks and Sub-Total

Hi All,
Created a simple report with Breaks and sub-total and then i exported that report block as BIWS. When I test it in the BIWS Manager, I can able to see the break data with sub-totals. But when i try to connect the same BIWS with Dashboard, am getting only the detail rows and am not getting the sub-total rows.
Please suggest how to go over this issue.Thanks for your time and support.

You have any idea now ‘nbLines’ works? If its returning total row count, then i think we can try some options with it. Basically am trying to get data like below to apply combo box selectors on Year and Country.
Year
Country
Sales
2013
India
100
2013
US
200
2013
UK
100
2013
Total
400
2014
India
100
2014
US
200
2014
UK
100
2014
Total
400
Total
Total
800
But am getting it as below, if i apply combox box on Year and Countyr, am getting blank value in between list of values.
Year
Country
Sales
2013
India
100
2013
US
200
2013
UK
100
2014
India
100
2014
US
200
2014
UK
100
2013
Total
400
2014
Total
400
Total
Total
800
Thanks

Why my Iphone4 don't detect my Ipad2 with bluetooth and opposite

Why my Iphone4 don't detect my Ipad2 with bluetooth and opposite

I have the same problem.
I also need both devices to detect each other because some software like scrabble require the bluetooth connection so play. I am also using Conference and Remote (recommended by Apple!) which are also able to use the bluetooth connectivity

All of a sudden my personal hot spot isn't working. It only comes up with Bluetooth and USB connection options. Why would that be?

All of a sudden my personal hot spot isn't working. It only comes up with Bluetooth and USB connection options. Why would that be?

No I can not turn on the wifi either. I can get on the web on my phone and Facebook etc on phone but no wifi or hotspot

I updated my ipod and my computer crashed during the update now the apps that come with the ipod such as the app store and itunes are not on my ipod how do i fix this

i updated my ipod and my computer crashed during the update now the apps that come with the ipod such as the app store and itunes are not on my ipod how do i fix this

Connect your iPod to any computer with iTunes installed, highlight your device and try syncing the apps only. If it doesn't work might have to restore through iTunes. With the new iTunes and iCloud beta, you can have the iTunes list what apps are missing on your device but if you had previously purchased in the past and then have iTunes install them. You should always get in the habit of backing up your iPhone whenever you do any firmware/OS updating/upgrading or transferring over to new device. I really really really really hope you can get back at least some of your old info. I will tell you this, I have been kicking myself in the butt for not routinely backing up my iPhone when my beautiful special iPhone 4 came up missing and had to revert back to my 3GS. iPhone 5 will be released in a few months so I am holding off on purchasing a new iPhone til then, not that I did so without reservation and a little bit of iPhone 4 withdraw.

Which NB100 comes with Bluetooth and the sim card slot

i am wondering which model come with bluetooth and the sim card slot,

I was a little disappointed the Bluetooth is missing on the NB 1000 12A, agreed the Bluetooth logo is on the left side of the box although the actual product spec sticker is on the right side and it only mentions wireless b/g.
Some of the listings for this model online do say it has Bluetooth although its evident its not included.
I have ordered one of these to cover the lack of onboard Bluetooth support:
http://www.memorybits.co.uk/product_info.php?products_id=8156
Regards,
Stephen

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
Thanks!

Links should not create any problems in Keynote. If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
Try this repair for Keynote, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
4
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
5
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
6
when complete, restart the Mac normally, Apple menu > Restart
7
install Keynote from the Mac App Store
let us know if this helped

Iphone6 doesn't play music (have tried obvious things like volume etc and plugged in headphones, connected to a speaker via bluetooth, and tried to play from the inbuilt speaker). Does anyone know what the problem is and how it can be resolved?

Iphone6 doesn't play music (have tried obvious things like volume etc and plugged in headphones, connected to a speaker via bluetooth, and tried to play from the inbuilt speaker). Does anyone know what the problem is and how it can be resolved?

You can't buy the part from Creative as a spare.
I'm not sure how compatible other parts might be, but that would be a question for someone who really knows a lot about this area of electronics.
The Creative repair for this is likely to be expensi've, but the problem is most likely a broken solder connection than an actual new headphone socket. So if you know someone experienced in surface mount soldering you could probably get it repaired just with this.

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
TIA,
Jerry

Thanks, Martin.
Good to hear someone has had success. The lack of it here is frustrating and depressing.
Thanks again,
Jerry

TS3280 How can i enable both paired bluetooth and ios keyboard input at the same time?

How can i enable both paired bluetooth and ios keyboard input at the same time?
This is needed for the app im working on. Need some user input via keypad as well as scanner input via a paired bluetooth scanner.

You probably should not be using a keyboard bluetooth profile for a scanner, I am not a developer for apple so do not know the location for you to find out the correct profile you should be using for an input device that is not a keyboard. Sorry,
I am sure if you navigate the apple developer site you will probaly finmd what you're looking for.
https://developer.apple.com

I have the photographer plan With Photoshop and Lightroom. Now suddenly The creative cloud app says that Lightroom isn´t installed. It is and how do i fix this. I don´t want to loose any pictures. Tried logging in and out. Also restarted my Imac with no l

I have the photographer plan With Photoshop and Lightroom. Now suddenly The creative cloud app says that Lightroom isn´t installed. It is and how do i fix this. I don´t want to loose any pictures. Tried logging in and out. Also restarted my Imac with no luck.

This has nothing to do with your pictures. As long as LR works, nothing happens. The CC app merely has lost an entry in the installer database. Would a reinstall fix it? Sure. Is it necessary? Not really (until the next version or update). So unless you have too much time to spend or something isn't working, I'm sure you can find more interesting things to do with your tiem. Otherwise use the cleaner tool and get to it:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium

TS4006 When trying to find my ipod i get the message offfline. However I have it with me and it is connected to the internet and the find my iphone is on. Any suggestions?

When trying to find my ipod i get the message offfline. However I have it with me and it is connected to the internet and the find my iphone is on. Any suggestions?

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

FCPX 10.0.7 collapses when working with 25p and 23,98p clips in the same timeline.

FCPX 10.0.7 collapses when working with 25p and 23,98p clips in the same timeline.
Did anybody reported this? never happened to me in previous versions.
It seems to be solved when transcoding the 25p clips to 23,98p (both Canon EOS 5dMKII clips)
But *** it must work!
Thanx

FCPX 10.0.7 collapses when working with 25p and 23,98p clips in the same timeline.
Did anybody reported this? never happened to me in previous versions.
It seems to be solved when transcoding the 25p clips to 23,98p (both Canon EOS 5dMKII clips)
But *** it must work!
Thanx

How do I reboot my iMac in Lion? Right now it opens a black screen with dos and asks me to insert the boot disk.

How do I reboot my iMac in Lion? Right now it opens a black screen with Dos and asks me to insert the boot disk.I recently installed Parallels & Windows 7. Now if I have to turn the system off, it starts up as per above in Dos. know I need to start up and press a couple of keys, but which ones? I forgot....

A simple search around here, identified this thread https://discussions.apple.com/message/15762361#15762361
The More Like This box on the right has more.

I have a comment. I am very upset with Photoshop and all your tutorials regarding the quick select tool. I have watched many tutorials and read instructions until I am blue in the face. This tool does not work. It is all over the place and all of your

I have a comment. I am very upset with Photoshop and all your tutorials regarding the quick select tool. I have watched many tutorials and read instructions until I am blue in the face. This tool does not work. It is all over the place and all of your tutorials make it look so simple. How can you advertise this as a viable tool when it just doesn't work?

It is all over the place and all of your tutorials make it look so simple.
This is a user to user Forum, so you are not really addressing Adobe here, even though some Adobe employees thankfully have been dropping by.
How can you advertise this as a viable tool when it just doesn't work?
Concluding something does not work because you fail at using it is not necessarily always justified.
The Quick Selection Tool certainly has limitations, but your post seems to be more about venting than trouble-shooting – otherwise you might have posted an image where you failed to get an expected result.

Major regression with Bluetooth and car: Total crash of the Pre!

Similar Messages

Maybe you are looking for