Make the installer for my executable run the DAqcarddriver and runtime engine installer automatically

*Hi
I would like to know how to make the installer for my executable run the DAqcarddriver and runtime engine installer automatically
I would like to include run time engine and the drivers of my daqcard(AI16XE50),( and maybe Ni daq or anything else needed?) in order to make my application portable for other computers on OS win98 and winXP .
How can I do that
thank you in advance
Olivier

Olivier,
What version of LabVIEW are you using to build your application? On a remote computer you should only need the drivers you are using and the Run-Time Engine. You can attach installers to LabVIEW 8 installers, but for previous versions you will have to add it by opening the installer configuration page, configuring your installer and then configure the Advanced properties. This will allow you to attach a EXE to the installer which you can run. Also depending on the version of LabVIEW will affect the OS version that you will be able to install the RTE on. LabVIEW 7.0 is the last version that can be installed on Windows 98.
Please let me know if you have any further questions and please include the version of LabVIEW you are using. Thanks!
Andy F.
National Instruments

Similar Messages

[svn] 4223: Some fixes for bugs found running the TC acceptance tests:

Revision: 4223
Author: [email protected]
Date: 2008-12-03 11:35:03 -0800 (Wed, 03 Dec 2008)
Log Message:
Some fixes for bugs found running the TC acceptance tests:
- Empty try {} throwing NPE while emitting code.
- OP_Callproperty and OP_Callproplex may have a known type but default value.
- Better diagnostic message for CONSTANT_TypeName and preliminary plumbing for CONSTANT_TypeName support.
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/adobe/abc/GlobalOptimizer.java

Re: SB Audigy Series Support Pack 2.5 (08/09/2009)? Important Installation Notes
If any drivers are already installed, you must follow these steps to ensure a proper installation of the new Support Pack.
) Open a Command Prompt window with Admin privileges (right click and select Run as Administrator).
Type the following commands:
takeown /f C:\Windows\*.cdf
cacls C:\Windows\*.cdf /G [color="#ff0000"]Administrators:F
Where [color="#ff0000"]Administrators may?be different if you are running a localized version of Windows or?you can simply use your login name.
2) Unpack the previous Support Pack or Creative official release.
3) Run \Drivers\Setup.exe and choose Driver Uninstallation, select Delete all shared Creative audio driver files. and click OK. Reboot when asked to do so.
4) Make sure the following files were deleted, otherwise delete them manually:
- For Windows 7 / Vista 32-bit open?C:\Windows\System32 and delete UDAAPO32.DLL and?UDAPLD32.DLL.
- For Windows 7 / Vista 64-bit?open?[color="#ff0000"]C:\Windows\System32 and delete[color="#ff0000"] UDAAPO64.DLL and?[color="#ff0000"]UDAPLD64.DLL then? open?C:\Windows\SysWOW64 and delete UDAAPO32.DLL.

You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation

Hi all
Have seen a couple threads regarding this but unfortunately nothing that solves my problem thus far!
Right now, our developers are using the Domain Admin account to promote their website code using MSI files. I'd like to change this as I feel the Domain Admin account should be on lock down and only used when absolutely necessary, pretty common. The
same goes for my account too, I would like to absolve as much use of the Domain Admin as I can.
Problem is, when they run installers from their own accounts, they receive this error: You do not have sufficient privileges
to complete this installation for all users of the machine. Log on as administrator and then retry this installation
The accounts they are using are part of the Built In Administrators group and the Domain Admins group... I'm not sure what other permission you'd need in a domain? We've gone as far as explicitly giving them local admin access on this server and still
nothing changes.
Is there a Group Policy or something that I can change to provide install rights and possibly remove these accounts as Domain Admin and more along the line of Power User?
Thanks much for your help!
Ryan

Hi,
You could use Software Restriction Policies (SRP’s) or Applocker(supported on Windows server 2008 R2/Windows 7 only) to restrict the running
of the application for specific user.
Description of the Software Restriction Policies
http://support.microsoft.com/kb/310791
HOW TO: Restrict Users from Running Specific Windows Programs
http://support.microsoft.com/kb/323525
How to Implement Group Policy Security Filtering
http://www.windowsnetworking.com/articles_tutorials/Group-Policy-Security-Filtering.htmlPlease remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens

Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens. I partitioned my hard drive and I tried installing Microsoft windows and that worked just fine. But I do not understand why it wont install mac os x 10.5????? PLEASE HELP ME. Thanks Hamid

Try a new post in the 10.5 Installation forum.
DALE

How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0, How to get Basic salary amo

How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0, How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0

Hi,
Is your formula attached to basic salary element or some other element? You need to make sure that basic salary element has some value and is processed before this formula is called. Are you able to see value for basic salary element after payroll run?
Regards,
Pawan

I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1

I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1. Antworten auf Deutsch wären super!

As far as I know there is no download resource for older Macromedia programs and it is highly unlikely that one as old as version 3 of Fireworks will be able to work on a Windows 8.1 system. I was unable to get a Studio 8 version installation on a Vista system, and likely even an XP system (cannot remember that far back).

Please help suggestions for solving built-only compiler error: 'The VI is not executable. The full development version of LabView is required tofix this error.'

We have develoepd a software tool and build it on regular basis. It currently runs error free when compiled in the editor, but when we built it and run the executable stand alone we get the error.
'The VI is not executable. The full development version of LabView is required tofix this error.' plus a broeken error.
This menas an compiler error that is not present in the editor but in the stand alone version. We tried to identify errors as suggested in several posts in this forum, but so far unsuccesfull.
As the editor and its compiler do not see the error and are running fine and the stand alone version just syas 'find the error in the editor' in this case LabView is of no help.
Can anyone suggest a sensible or 'good practice ' way of searching for the source of this error?
Our project comprises hundreds of Vis over several libraries.
Thanks,
Chris

Thanks Craig for all your suggestions.
We seem to have located the problem in a new vi just added to the package causing conflicts by using the same vi names as other vis already present in the package. Excluding this vi removed the error.
It seems related to a conflict by having two vis with the same name, which was mentioned by LabView and interactively resolved when running the main vi from the editor. When successfully building the main vi the builder did not mention this conflict and reported a successful build, but when trying to run the executable it gave the cryptic error. The error caused us problems because there was no hint for the cause, just the suggestion to solve this in the editor, while at the same time in the editor the VI was running fine.
We will post about this in detail after we have positively proven that this actually was the case.
The .net version issue was already checked.
Performance was the same on all machines we tested on including the dev machine.
Debugging was tried nut did not help as the vi could not run (broken arrow). We assumed that debugging only helps in running faulty functioning vi''s. We did not check for broken arrows in sub-vis (after connecting), that could have helped, although our application has hundreds of our own vis.
In relation to your remark:
'Are you using many classes? Have you verified that the proper access scopes are set for functions calling those vis?'
Could you elaborate on setting access scopes. We were not aware of this option in LabView, although we realize this is a basic element of the underlying c code.
Ragrds,
Chris

How to make ENTER key in internet explorer run the BIP report?

In BI publisher 11g, users wanted that after entering the values for the parameter, they hit the ENTER key ( on the keyboard) and the report should run .
In Mozilla firefox, when I hit ENTER key on the keyboard report runs fine... but in Internet explorer, it does not ( infact in internet explorer TAB key works)
How to make ENTER key in internet explorer run the report?
Thanks
Ashish

Perform the following steps and tell us if it resolve this issue:
1. In Internet Explorer, click Tools, and then click Internet Options.
2. Click the Security tab.
3. There are four security zones listed:
* Internet
* Local intranet
* Trusted sites
* Restricted sites
Click the zone being used by P6, which is noted at the bottom right hand corner of the browser window when the P6 URL is being accessed.
4. Under Security level for this zone, click Custom Level.
5. Under Downloads, under Automatic prompting for file downloads, click Enable, and then click OK two times.
6. The browser will need to be restarted for the change to take effect.
Refer to the following Microsoft Knowledge base article for additional file download and active x controls which should also be enabled: http://support.microsoft.com/kb/883255

In oneasset class i have created 2 assets by using of aso1 after that i acquired one asset for that i run the depreciation for first 5 periods, it has been showing depreciation for those period but if i am trying to run the depreciation for second asset i

in on asset class i have created 2 assets by using of aso1 after that i acquired one asset for that i run the depreciation for first 5 periods, it has been showing depreciation for those period but if i am trying to run the depreciation for second asset it is not showing first 5 periods why it is not showing? Is there any reason?

Hi
Repeat run you can do only for the last depreciation period. For the asset which you are tryin to post depreciation from July to Jan, please check the asset value date which you have given while posting the transactions or in the asset master.
If the asset value date is in July, then deprecaition from July - Jan will get posted in the current month depreciation in total. You will not be able to post depreciation individually month wise using AFAB.
REgards
Malathi

I want to make a payment for adobe cc but the payment system is unavailable

I want to make a payment for adobe cc but the payment system is unavailable

Hi daphnejvr
Your Adobe ID shows your country as Nigeria which is not a country that we currently sell to via adobe.com. This would explain why your order wasn't accepted.
Creative Cloud for Teams is available via resellers in your region.
Kind regards
Bev

Two apple identifiers make it impossible for me to retrieve the apps

Hi,
two apple identifiers make it impossible for me to retrieve the apps
that I had from a previous macbook and iphone to the new macbook. HOw do I get to get my apps back on both devices since itune wont let me retrieve the info with the previous identifier?
thanks for the help
Annie

Hi anniehillairet,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
I have purchased music, apps, or books with multiple Apple IDs. How can I get all of this content onto my iOS device? 
First, you need to copy all of your purchased content so it is on the same Mac or PC with iTunes. This computer should be the one you sync your device with. For more information on how to move your content, see these articles:
Mac: iTunes for Mac: How to copy purchases between computers
PC: iTunes for Windows: How to copy purchases between computers
Next, authorize your computer to play content with each Apple ID in iTunes. Once your computer is authorized for all your content, it can be synced to your iPhone, iPad, or iPod touch.
Cheers,
Judy

The VI is not executable. The full development version...

"The VI is not executable. The full development version of LabVIEW is required to fix the errors." That is the error I've been dealing with all day. Actually it is repeated 3 to 4 times in the error message, seen when first launching the EXE. Also of note is that the run-arrow is broken. This is in an EXE that was developed well before version 2013, but I recently upgraded it to 2013 to hopefully fix some random LVRT crashes. There is obviously no issue running the code on my development machine, only once it's deployed.
The good news is I've been able to solve the problem (mostly). My EXE now runs without the errors. I found that the problem wasn't actually in the EXE.
We have a separate project with no files, but in the build specification we have the LabVIEW 2013 Run-Time Engine, as well as NI-VISA for serial support. We then bundle the deployment in a self-extracting RAR and it does its business. In the past this has worked just fine, but with LV2013, it seems that there is a component missing from the deployment.
I found that if I download the Run-Time Engine directly from NI.com and run it, the only things I need to install are the Run-Time Engine, and the DEPLOYABLE LICENSE. If I do this, my EXE runs great, but with the custom installer, it is not included for some reason!
Putting aside the fact that I don't know why the Deployable License package is needed (we aren't connecting to remote panels), I can't seem to modify my custom installer to install the Deployable License. There are versions for LabVIEW 2009 and 2011 SP1 in the Additional Installers list, but I don't see 2013.
Can anyone explain why this is??? For now I will just distribute the 257MB Run-Time Engine and the NI-VISA installers separately I guess. But I'd really like to get back to a single, simple package to install all the prerequisites we need. HELP!

iannicholson wrote:
Yes, but then every installer I build will contain the runtime engine. That gets very large very quick. So I have an installer for JUST the runtime engine and VISA runtime.
Just remove them from the "Additional Installers" tab of the Installer dialog.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

"Error:The search cannot be executed because the table has pending changes that would be lost", after DELETE

Good day,
On Search Page, I have searched for the record(s) then deleted a record and got confirmation message i.e. Record has deleted. Next when I search for any record I'm getting below error.
Error
The search cannot be executed because the table has pending changes that would be lost.
Could you please help me to fix this issue. Your response is highly appreciated.
Item properties:
Item Style : Image
Action Type: Fire Action
Event : delete
Below is the code using in CO and AM
Controller (processFormRequest):
if ("delete".equals(pageContext.getParameter(EVENT_PARAM)))
          // The user has clicked a "Delete" icon so we want to display a "Warning"
          // dialog asking if she really wants to delete the employee. Note that we
          // configure the dialog so that pressing the "Yes" button submits to
          // this page so we can handle the action in this processFormRequest( ) method.
          String visit_id = pageContext.getParameter("visit_id");
          String employeeName = pageContext.getParameter("last_name") + ", " + pageContext.getParameter("first_name");
          MessageToken[] tokens = { new MessageToken("EMP_NAME", employeeName)};
          OAException mainMessage = new OAException("FND", "XXXX_EMP_DELETE_WARN", tokens);
          // Note that even though we're going to make our Yes/No buttons submit a
          // form, we still need some non-null value in the constructor's Yes/No
          // URL parameters for the buttons to render, so we just pass empty
          // Strings for this.
          OADialogPage dialogPage = new OADialogPage(OAException.WARNING,
            mainMessage, null, "", "");
          // Always use Message Dictionary for any Strings you want to display.
          String yes = pageContext.getMessage("AK", "FWK_TBX_T_YES", null);
          String no = pageContext.getMessage("AK", "FWK_TBX_T_NO", null);
          // We set this value so the code that handles this button press is
          // descriptive.
dialogPage.setOkButtonItemName("DeleteYesButton");
          // The following configures the Yes/No buttons to be submit buttons,
          // and makes sure that we handle the form submit in the originating
          // page (the "Employee" summary) so we can handle the "Yes"
          // button selection in this controller.
dialogPage.setOkButtonToPost(true);
dialogPage.setNoButtonToPost(true);
dialogPage.setPostToCallingPage(true);
          // Now set our Yes/No labels instead of the default OK/Cancel.
dialogPage.setOkButtonLabel(yes);
dialogPage.setNoButtonLabel(no);
          // We need to keep hold of the employeeNumber and employeeName.
          // The OADialogPage gives us a convenient means
          // of doing this. Note that the use of the Hashtable is
          // most appropriate for passing multiple parameters. See the OADialogPage
          // javadoc for an alternative when dealing with a single parameter.
          java.util.Hashtable formParams = new java.util.Hashtable(1);
formParams.put("visit_id", visit_id);
formParams.put("empName", employeeName);
dialogPage.setFormParameters(formParams);
          pageContext.redirectToDialogPage(dialogPage);
    else if (pageContext.getParameter("DeleteYesButton") != null)
          // User has confirmed that she wants to delete this employee.
          // Invoke a method on the AM to set the current row in the VO and
          // call remove() on this row.
          String employeeNumber = pageContext.getParameter("visit_id");
          String employeeName = pageContext.getParameter("empName");
          Serializable[] parameters = { employeeNumber };
         // OAApplicationModule am = pageContext.getApplicationModule(webBean);
am.invokeMethod("deleteEmployee", parameters);
          // Now, redisplay the page with a confirmation message at the top. Note
          // that the deleteEmployee() method in the AM commits, and our code
          // won't get this far if any exceptions are thrown.
          MessageToken[] tokens = { new MessageToken("EMP_NAME", employeeName) };
          OAException message = new OAException("FND",
            "XXXX_EMP_DELETE_CONFIRM", tokens, OAException.CONFIRMATION, null);
pageContext.putDialogMessage(message);
Application Module:
public void deleteEmployee(String visit_id)
        // First, we need to find the selected employee in our VO.
        // When we find it, we call remove( ) on the row which in turn
        // calls remove on the associated EmployeeEOImpl object.
        int empToDelete = Integer.parseInt(visit_id);
          OAViewObject vo = (OAViewObject)getNonEmployeesSummaryVO1();
    NonEmployeesSummaryVORowImpl row = null;
        // This tells us the number of rows that have been fetched in the
        // row set, and will not pull additional rows in like some of the
        // other "get count" methods.
       int fetchedRowCount = vo.getFetchedRowCount();
        // We use a separate iterator -- even though we could step through the
        // rows without it -- because we don't want to affect row currency.
        RowSetIterator deleteIter = vo.createRowSetIterator("deleteIter");
if (fetchedRowCount > 0)
          deleteIter.setRangeStart(0);
          deleteIter.setRangeSize(fetchedRowCount);
          for (int i = 0; i < fetchedRowCount; i++)
            row = (NonEmployeesSummaryVORowImpl)deleteIter.getRowAtRangeIndex(i);
            // For performance reasons, we generate ViewRowImpls for all
            // View Objects. When we need to obtain an attribute value,
            // we use the named accessors instead of a generic String lookup.
            // Number primaryKey = (Number)row.getAttribute("EmployeeId");
            Number primaryKey = row.getVisitId();
            if (primaryKey.compareTo(empToDelete) == 0)
              // This performs the actual delete.
              row.remove();
                getTransaction().commit();
              break; // only one possible selected row in this case
        // Always close the iterator when you're done.
        deleteIter.closeRowSetIterator();
      } // end deleteEmployee
Thanks,
Ravi

Hi
Check this link Getting error in search page search cannot be executed
Regards,
Dilip

Upgraded to OS X 10.9.4 and Safari 'is no longer supported' Also get the error when trying to run the App Store, ' PowerPC applications are no longer supported. This is on a MAC Book Air, purchased in late 2013.

Safari and the App store icons are both deactivated. I also cannot a software update check, as it gives the 'PowerPC applications are no longer supported error'
Very frustrating, cannot do anything with this laptop now. Any help is greatly appreciated.

If you don't already have a current backup, back up all data. There are ways to back up a computer that isn't fully functional. Ask if you need guidance. You can skip this step if you don't care about the data that hasn't been backed up.
Reinstall the OS.* Your data should be unaffected unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

How to let the user define the colors for each plots in the graph (I use LabVIEW 7)?

How to let the user define the colors for each plots in the graph (I
use LabVIEW 7)?

Hi,
Take a look at this example, it uses property nodes to select tha
active plot and then changes the color of that plot.
If you want to make the number of plots dynamic you could use a for
loop and an array of color boxes.
I hope this helps.
Regards,
Juan Carlos
N.I.
Attachments:
Changing_plot_color.vi ‏38 KB

Make the installer for my executable run the DAqcarddriver and runtime engine installer automatically

Similar Messages

Maybe you are looking for