Making retirement Inactive in OAZ1

Hi,
How do you make changes to transaction OAZ1.Basically I am Deactivating AA Validation "RETIREM" (Retirement).I am making transaction type group 20 and 25 "Inactive".How to save the changes and as no transport request is created,how to transport it to other clients...
Regards,
Payal Saxena

Hi Payal
Before going to OAZ1, you must have been created an validation in GGB0 under asset accounting->postings...
Since the message you are getting is not an error message, you can go ahead with it.
After passing through this message, where you can assign a specific validation for each asset activity and make that is active and SAVE it.
Hope this solves your issue.
If not, you should contact the Basis team.
Thanks,
Zub

Similar Messages

Hiding & Making tracks inactive in AUDITION... i.e. PROTOOLS

I am just learning and starting to work with Audition CC (long time protools user), and loaded some OMF files into Audition (with REF video), and once I pull all my dialog (from the OMF's) to my dialog tracks I want to close/hide and make those original OMF tracks inactive, just like you can in protools (so you don't have a bunch of tracks open that are not in use). Please tell me this is an option in AUDITION, becuase if it is NOT, this program is virtual useless when it comes to PRO-LEVEL sound designing??? HELP!

Guys, don't get me wrong, I am a huge proponent of moving to an ALL ADOBE workflow. I have completely made the switch to PremPro (after a long stint with FINAL CUT). I am completely happy with this change as PP is a better program, utilizing much more updated technology. I am learning and trying to utilize SpeedGrade with its awesome DIRECT LINK (but it does appear to have some limitations), and I am currently working on a viable workaround to those. Over the past couple of weeks I have been "cramming" an extensive education on AUDITION (and I LOVE most aspects of it). I do feature film sound design so it is imparitive that I am working on a "robust" program (and for the most part I am seeing good things with Audition). But, when I typically work with a team of 4 to 5 different people contributing to the sound design (i.e. guys that are sending me Background sessions, Foley Sessions, dialog editing, Music/Score etc..etc), I have to import tons of tracks that are then analysed and discected in PROTOOLS (using just the parts we deem worthy to "make the final product"). Therefore (once we pull the appropriate parts from those external sessions) I can end up with 40-60 "dead" tracks inside my MASTER MIX session, and for many reasons I have to be able to hide and make these "dead" tracks INACTIVE! They will "kill" your session if you do NOT, they are a huge drain on the processors (creaing latency), and they are extremely hard to work around in your edit window (and moving them all to the bottom of the edit window is not a good option). That was my first thought as a "work-around" in AUDITION. I appologize for my mis-communication regarding AUDITION being a PRO-LEVEL product, as you have pointed out that it is used in RADIO, but I was specifically referring to feature film "SOUND DESIGN". STEVE G I am not "writing off" AUDITION at all, I want to use it and I am very interested to hear more about your idea of setting tracks to "off-line", I did try closing tracks in my "FILES" window, but once I did the files just disappeared from my session??? I do need the abillity to bring these "dead tracks" back into the session at various times (i.e. "make active"), so I am a bit confused on this issue. Any help you can push my way would be very appreciated. Again, I want to use AUDITION, and will keep working on ways to do so. But I need a solution to the very fundamental problem of not being able to hide (and make inactive) tracks for the work I do, it is a must for me before I can make the switch. BTW... I have put in a request for new features to ADOBE.

Field Exits - Making Field Inactive

Hi Expert,
I am coding a field exit. I would like to make the field inactive depending on some condition. Is it possible to make it inactive using field exits?
Warm Regards
Abdullah

Hi Experts,
Thanks for your response.
In IW32, I want to make the field USER4, active or inactive depending on some condition. I have found this badi, IWO1_SCREEN_MODIFY. This badi will make the field invisible which is not the result I want. Can anyone suggest some other badi or exit which will let me control.
Regards,
Abdullah

Blocking user access if employee is inactive

Hi All
We are planning to have HR-CRM integration, whereby employees will be downloaded in CRM as in BP Role='employee".
These employees will also have their user ids, which will enable their access to CRM application.
Now if an employee is terminated in HR (becomes inactive), then with the Idoc flow the BP Role="employee" is deleted from the employee BP in CRM.
I have observed that even if employee becomes inactive in HR and its BP Role="employee" is deleted from the BP in CRM, its SU01 user id (in CRM) remains active.
My question is that with the above mentioned trigger, how will the user id (SU01) of employee be blocked so that employee is unable to access the CRM application. What is the best practice around it ?
Any thoughts around this will be awarded with suitable points.
Thanks & Regards
Vishal

Thanks Ashish and Jushan for sparing your valuable time. However I think I could not communicate my query properly so let me rephrase it.
See, even I know how to block the SU01 user either by removing roles, making it inactive etc.
But my question is that what is the best practice around the communication process between the HR and CRM admins ?
"If an employee becomes inactive, then is it expected that HR team will communicate to CRM administrator thru mails etc. to block the CRM account ?"
I was assuming that in "ideal" scenario, if an employee becomes inactive in HR and its BP role="employee" gets deleted in CRM, then there should be some automated process to block the CRM user id so to restrict the employee access to CRM application.
However it does not happen presently. My question to the forum is that how have you guys have handled the process around it ?
Does HR guys put email to CRM admins to block the account ? Does HR has written some sort of actions/workflows to trigger mails to CRM admins to block the account? -OR- is there is some automated way to block the account immediately, once an employee becomes inactive in HR. -OR- any other process ?
Thanks & Regards
Vishal

UCCX 7.0.1SR5 to 8.0 upgrade while also adding LDAP integration for CUCM - what happens to agents and Historical Reporting data?

Current State:
•    I have a customer running CUCM 6.1 and UCCX 7.01SR5. Currently their CUCM is *NOT* LDAP integrated and using local accounts only. UCCX is AXL integrated to CUCM as usual and is pulling users from CUCM and using CUCM for login validation for CAD.
•    The local user accounts in CUCM currently match the naming format in active directory (John Smith in CUCM is jsmith and John Smith is jsmith in AD)
Goal:
•    Upgrade software versions and migrate to new hardware for UCCX
•    LDAP integrate the CUCM users
Desired Future State and Proposed Upgrade Method
Using the UCCX Pre Upgrade Tool (PUT), backup the current UCCX 7.01 server.
Then during a weekend maintenance window……
•    Upgrade the CUCM cluster from 6.1 to 8.0 in 2 step process
•    Integrate the CUCM cluster to corporate active directory (LDAP) - sync the same users that were present before, associate with physical phones, select the same ACD/UCCX line under the users settings as before
•    Then build UCCX 8.0 server on new hardware and stop at the initial setup stage
•    Restore the data from the UCCX PUT tool
•    Continue setup per documentation
At this point does UCCX see these agents as the same as they were before?
Is the historical reporting data the same with regards to agent John Smith (local CUCM user) from last week and agent John Smith (LDAP imported CUCM user) from this week ?
I have the feeling that UCCX will see the agents as different almost as if there is a unique identifier that's used in addition to the simple user name.
We can simplify this question along these lines
Starting at the beginning with CUCM 6.1 (local users) and UCCX 7.01. Let's say the customer decided to LDAP integrate the CUCM users and not upgrade any software.
If I follow the same steps with re-associating the users to devices and selecting the ACD/UCCX extension, what happens?
I would guess that UCCX would see all the users it knew about get deleted (making them inactive agents) and the see a whole group of new agents get created.
What would historical reporting show in this case? A set of old agents and a set of new agents treated differently?
Has anyone run into this before?
Is my goal possible while keeping the agent configuration and HR data as it was before?

I was doing some more research looking at the DB schema for UCCX 8.
Looking at the Resource table in UCCX, it looks like there is primary key that represents each user.
My question, is this key replicated from CUCM or created locally when the user is imported into UCCX?
How does UCCX determine if user account jsmith in CUCM, when it’s a local account, is different than user account jsmith in CUCM that is LDAP imported?
Would it be possible (with TAC's help most likely) to edit this field back to the previous values so that AQM and historical reporting would think the user accounts are the same?
Database table name: Resource
The Unified CCX system creates a new record in the Resource table when the Unified CCX system retrieves agent information from the Unified CM.
A Resource record contains information about the resource (agent). One such record exists for each active and inactive resource. When a resource is deleted, the old record is flagged as inactive; when a resource is updated, a new record is created and the old one is flagged as inactive.

How to remove Competetors TAB from PCUI Opportunity create trx

Hi Group,
we are using CRM 5.0, i want to remove Competitor's TAB from PCUI Opportunity Transaction. i see a option in CRMC_BLUEPRINT_C transaction-> Application/Layout->Define layout of the people-centric UI(Customizing tool). here i went to CRMD_BUS2000111-> Version 1-> Static model-> Tabpage groups-> OPP_1: when i clicked on this i got all Tab's details. but when i tried making OPP_HD_COMP "Inactive" and hit Save that Check mark goes away. tried many times but did not help.
then i tried going to CRMC_BLUEPRINT_C transaction->Application element-> tab page group structure->OPP_1: here i dont see any entries. do i have to add all Opportunity Tab's details here or only the Competetor tab details?
Please let me know does anybody see all Tab's data here or you just enter all Tabs data manually in CRM 5.0? also how can i remove Competetors Tab? your help is appreciated and awarded.
regards,
Anu.

Hello Anu,
WHen you are in CRMC_BLUEPRINT_C transaction->Application element-> tab page group structure->OPP_1, go to edit mode and import the standard entries from CRMC_BLUEPRINT (on of the buttons on the screen).
Then, for the tab you don't want to see, just put it as inactive (if not possible, just delete the line, you can always come back to the standard by importing the S tables again).
Regards,
Frédéric

STATUS_UPDATE error to update USER STATUS - Update termination error

Hi All,
I am using status_update FM in sales order user exit MV45AFZZ in a perform routine for updating user status in line item for sales order. There are 4 custom statuses created for the sales order line item. 1,2 3, and 4 by configuration. My job is to select one of those based on user selection.
Scenario: During change order process using VA02, I have to change the existing status to a third status when user selects the second one. That is for example, in VA02, user selects status 4 from previous status 3, and save, I have to make the status 4 inactive and save the new status 2 instead of 3 though user selected 3. How do I achieve this.? ????Any programming example is really appreciated. Thanks!!!
I am right now using STATUS_READ and reading the existing status 4. Then making it inactive using status_update FM. And updating the new status 2 as active one and 3 as inactive again. Two inactive updates and one active update is throwing an update termination error while saving the sales order.
Any help is really appreciated.
Thanks
Ricky

Hi ricky,
For saving any changes you need to have a Z-table.
In programs we can't store the user selection. In your case you can create a z-table and store the status there and delete the last status. The process would be faster as you will always have one record in the table.
. One more advantage is you can even track the changes through the Z-table(User who is changing it.)
Hope this solution will surely help you.
Cheers
Suvi

Problem in Pricing procedure logic

Hi,
In pricing procedure ,our functional team requires some logic inthere procedure .
1. Thay have condition type of ZBEA and ZBEE, If ZBEE is active that time ZBEA should be inactive.
   For that i created a routine like below.
DATA: LV_XKOMV TYPE KOMV.
if xkomv-kschl = 'ZBEA' and xkomv-kbetr NE 0.
clear lv_xkomv.
READ TABLE XKOMV INTO LV_XKOMV
              WITH KEY
              KSCHL = 'ZBEE'.
IF sy-subrc = 0.
    XKOMV-KINAK = 'X'.
    MODIFY XKOMV TRANSPORTING KINAK WHERE KSCHL = 'ZBEA'.
ENDIF.
endif.
Now its making ZBEA inactive but its showing ZBEE as 2times. How to avoid this?
Can anyone please help this.
Point will be sure.
Mohana

Hi
But where are you doing that?
U should insert an Alternative Formula Routine in pricing procedure for condition ZBEA:
READ TABLE XKOMV INTO LV_XKOMV WITH KEY KSCHL = 'ZBEE'.
IF SY-SUBRC = 0 AND LV_XKOMV-KINAK IS INITIAL AND LV_XKOMV-KBETR <> 0.
   XKOMV-KINAK = 'A'.
ENDIF.
Max

File -to- File is not working. Why????

Hi SAP gurus,
We have Installed XI 3.0 successfully on one blade server (Stack 04 configuration).
We tried file-file scenario but nothing seems to be happenning.
How to know whether File Adapter has been Initialized or not? And whether its able to pick a file.
As SXMB_MONI transaction is not displaying any messages. Runtime workbench (message monitoring) too doesnt display anything.
We also tried making adapter inactive <--> active but of no use.
Do we need to make any special visual admin adapter settings?
Plz help
Sudhir

Hi
am tryin a similar scenario, nothin seems to work , ve tried to explain wat object i ve created in IR & ID, ne clarifications are welcome.
SLD - > I Created a product, SWC , then 2 tech systems(Third Party), then 2 Business Systems( One for file sender & other as file receiver)
Design Time -> 2 DTs , 2 MTs, 2 MIs, and then a straightforward mapping program(a Message Mapping & then an Interface Mapping)
Config Time -> Assign Both Bus Systems, created 2 comm channels ( sender & receiver ), then created a Sender Agreement( to associate the sender channel).
After this created a Receiver Determination, specifed the sender service & interface. In the "Configured receivers" , added the receiver Business system as "Service" . Then created a interface determination.
Is there anything i ve missed in my above configuration ?
Now after doin all this , tried activating the channels, nothin seems to happen & monitoring gives no message. Hit point blank , Now i ve some trivial queries,
1) When i choose the Transport Protocol as "NFS" , i beleive the file to be polled has to be on the XI Server host m/c ?
2) When i choose the protocol as FTP , i can ve my own FTP server( am using guildFTP server) , IS there any specific FTP server to be used or can i use any server available( say a UNIX m/c with FTP port enabled) ?
3) How is the directory format specified, It has to be prefixed by a / rite ? , say assuming i ve a folder called upload where in my input files are kept , i specify as /upload ?
4) By "adapter engine has to be up", Is it the adapter engine which is brought up from the tech_adapter folder using the run_adapter.bat file ?
5) Where do i go and view the log file/trace file ?
Thanks
Saravana

PO short text overwrite by Contract

Hi,
I am creating a PO for Service which doesnt have a Material Number. I need to refer the Contract number for those buys. When i am refering the Contract, it is overwritting the PO shorttext with what i have maintained in the Contract.
I dont want to happen this. Please advice this on what needs to be done for making this inactive. Thanks in Advance.
Thanks

Hi,
Try removing Contract source object (Target text - Header text) from text linkages under below path:
In case of Header text --> SPRO - Materials Management - Purchasing - Purchase Order - Texts for Purchase Orders - Define Copying Rules for Header Texts.
In case of item text --> SPRO - Materials Management - Purchasing - Purchase Order - Texts for Purchase Orders - Define Copying Rules for Item Texts.
Regards,
Ram

Unable to delete/create integration models.

Hi All,
I need to correct some int.models wrt the logical system.
1) CFM1 u2013 choose variant pops up a msg- logical system not maintained in NDV2. This is not supposed to be maintained. I need to change the variant models for a different logical system that is maintained in NDV2.
2) CFM7- delete all models.- I am unable to delete the models even after making them inactive.
Final objective is to delete all the models- active and inactive and recreate new ones as nomenclature needs to be same. I canu2019t maintain the wrong (present) logical system in img, that's seen in the IM variants that do not lend themselves to change. The moment i do CFM1 it pops up a an error screen referring a wrong logical system..
Pls., guide step by step.
Regards,
Lok

Thanks Lakshmi,
I began on the same note as wass evident but i did not have the wb request auth required. so was thinking if there is another was out fiddling with user transactions of IMs
Thanks for prompt reply. Awarded full 10 points.
Regards.
Lok

CUP: Delete user certain time after request has been created

Hi,
Is it possible to define in CUP a delete account workflow that once the request has been created user deletion waits some time (i.e 1 month) before user is finally deleted? We would need a workflow without any approver.
Delete User request creation >> 1 month >> User is deleted
Thanks in advance. Best regards,
Imanol

Hi,
Automatically deleting user IDs after a specific # of days is not possible in CUP. However, while creating the stage, you can define the wait time and then trigger the escalation. You can make the escalation to the Security Manager who can immediately take up the proper action, i.e., deleting the ID or making it inactive.
Infact, this is the reason why it is recommended to have an alternative approver.
Hope this addresses your question.
Regards,
Raghu

My Router ip is appearing in the advanced window in dns and cannot connect to dns

right i am having problems with dns servers i have tryed everything when i select my network and go into advanced settings in dns my router ip address appears and it wont connect to the correct dns because it trys to look up the router i cant delete it and every time i manage to get rid of it, it reappears adding the correct dns servers makes no change. when i go into teminal and check my dns my router ip appears but no very able in terminal.
any help would be greatly helpful it is runninh 10.5.8
Have tried making airport inactive and manually entering all the ip address and subnet etc but as soon as i click apply it adds the same address again.

Hi..
Try using OpenDNS.
Click +
Enter these addresses exactly as you see them here.
208.67.222.222
Click +
208.67.220.220
Then click OK.
More about OpenDNS here > Topic : Manually provided DNS server addresses are higher priority than DHCP's
OpenDNS offers better speed, more security, includes anti phishing filters, prevents browser redirects, and it's free.

Temporary dead pixel in Photoshop CS5

Hello,
I got some strange bug.
There is a white dot appearing on my screen right after I open any file or preferences window.
The dot turn grey if I drag something white under it.
The dot shows itself only when the PS app is active.
Even if I just click on my desktop wallpaper "through" PS making it inactive - the dot disappears.
Activating PS back - returns the dot.
I figured out that it happens when PS switches from integrated to discrete GPU.
Some more strange behavior:
- If I force to use only integrated GPU before starting PS there is no dot
- If I force to use only discrete GPU before starting PS there is no dot
- If I use dual monitor configuration before starting PS there is no dot
- If I unplug second monitor during PS session the dot appears
- If I plug second monitor during PS session the dot doesn't dissapear
- If I reset or delete preferences in PS folder it switches to discrete GPU on launch and there is no dot. But after closing and restarting PS with preferences saved it starts with integrated GPU and switches to discrete on opening file or preferences. And the dot appears.
Tried to ask Adobe Support and Adobe Community. No solution.
Any idea on what's going on and why is it started only now?
No changes to PS preferences or to system were made.
It appeared just during one of PS sessions.
Thanks.
My specs:
Macbook Pro 17 late 2011
2.5 Mhz I7
16 GB RAM
Two drives SSD + HDD
Mac OS X Mavericks 10.9.5.
Adobe Photoshop CS5 12.0 x64

Well, after all I want ot find out what is the root of this bug. Is it a software bug or a hardware malfunction.
It doesn't seem like a hardware malfunction to me, because the dot appears in one exact place.
If it would be some sort of VRAM problem - then it would be in different place each time, because there is a random information allocation in VRAM each time it loads into.
So it looks like a software or driver bug.
The problem is localized and here it is:
- PS CS5 in current situation doesn't switch to discrete GPU during launch
- If something switches graphics to discrete GPU when PS CS5 is already running - the dot appears in one exact place only when PS interface is active.
It could be new file creation, file open, going to PS preferences, or it could be other application that switches GPUs, or manually through deactivating energy saving options in system preferences, or manually through gfxCardStatus application or any other way to switch GPUs when PS CS5 is opened and hasn't switched GPUs during its launch.
Is that's a normal behavior for PS CS5 - not to switch GPUs on launch - I don't know.
I know that if reset preferences on launch or delete it manually - first run of PS CS5 is with GPUs switch during launch. After closing it and opening it next time - it doesn't switch GPUs during launch no more.
So the questions is what is broken now. If PS always before switched GPUs after launch - then it could be some sort of driver or hardware problem.
If the behavior of PS changed somehow and before current situation it switched GPUs always on launch - then it's a PS problem.
Or maybe some sort of other problem, that I don't see yet.
I haven't found any other program, that switch GPUs after launch, so I can't test it.
If you know any - please tell me.
If anyone of you use any versions of PS on dual GPUs macs - please tell me if your PS switches on launch, or after. You can use gxfCardStatus for that kind of check.
Well I'm going to make a clean install of OS and reinstall PS if there will be no other answer.
I'll share the results.
I've already tried to install Mavericks and Updates over current installed OS, reset NVRAM and SMC - no result.

Backup of sql database grows rapidly

Hi,
We have issue with respect to log's over MSSQL, due to logs the size of the database is increasing rapidly.
Can you please provide the best solution as what needs to be done.
Thanks,
Chetan Krishna

Hi,
IMHO more appropriate term would be :taking log backup makes the VLF *reusable*( reusable would be more correct term) although truncate the logs/making it inactive/cleared all are correct no issue about it yes taking log backup truncates log and makes
it resuable if nothing is holding log.
Chetan please provide information about recovery model and what does below query return
select log_reuse_wait_desc from sys.databases where name='db_name'
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Making retirement Inactive in OAZ1

Similar Messages

Maybe you are looking for