Making run automatically

can some one help me making it run automatically and adding slideshowTimer on the codes below
next_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToNextFrame);
function fl_ClickToGoToNextFrame(event:MouseEvent):void
nextFrame();
previous_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToPreviousFrame);
function fl_ClickToGoToPreviousFrame(event:MouseEvent):void
prevFrame();

thank you for your input
however, i am getting error message when i put these codes on:
Symbol 'Symbol 2', Layer 'Layer 3', Frame 1, Line 3 1150: The protected
attribute can only be used on class property definitions.

Similar Messages

Making photo gallery run automatically

hi there
i have already created a photogallery for the website below.
http://hitenkajal.co.uk/hk_family.html
Now i will like the photos to run automatically as well as having button to click on. I want this done via as3 as i have quite alot of photos. Can someone help me?
my as3 code:
/* Mouse Click Event
Clicking on the specified symbol instance executes a function in which you can add your own custom code.
Instructions:
1. Add your custom code on a new line after the line that says "// Start your custom code" below.
The code will execute when the symbol instance is clicked.
family1_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler);
function fl_MouseClickHandler(event:MouseEvent):void
    // Start your custom code
    // This example code displays the words "Mouse clicked" in the Output panel.
    trace("family1_btn");
    familyBkgd.mainLoader.source = "hkimage/largepic/family.jpg";
family2_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_2);
function fl_MouseClickHandler_2(event:MouseEvent):void
    // Start your custom code
    // This example code displays the words "Mouse clicked" in the Output panel.
    trace("family2_btn");
    familyBkgd.mainLoader.source = "hkimage/largepic/sheth_family.jpg";
    // End your custom code
family3_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_3);
function fl_MouseClickHandler_3(event:MouseEvent):void
    // Start your custom code
    // This example code displays the words "Mouse clicked" in the Output panel.
    trace("family3_btn");
    familyBkgd.mainLoader.source = "hkimage/largepic/valani_family.jpg";
    // End your custom code
family4_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_6);
function fl_MouseClickHandler_6(event:MouseEvent):void
    // Start your custom code
    // This example code displays the words "Mouse clicked" in the Output panel.
    trace("family4_btn");
    familyBkgd.mainLoader.source = "hkimage/largepic/hiten_brothers.jpg";
    // End your custom code
family5_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_5);
function fl_MouseClickHandler_5(event:MouseEvent):void
    // Start your custom code
    // This example code displays the words "Mouse clicked" in the Output panel.
    trace("family5_btn");
    familyBkgd.mainLoader.source = "hkimage/largepic/the_sisters.jpg";
    // End your custom code
family6_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_7);
function fl_MouseClickHandler_7(event:MouseEvent):void
    // Start your custom code
    // This example code displays the words "Mouse clicked" in the Output panel.
    trace("family6_btn");
    familyBkgd.mainLoader.source = "hkimage/largepic/kajal_baa.jpg";
    // End your custom code
family7_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_8);
function fl_MouseClickHandler_8(event:MouseEvent):void
    // Start your custom code
    // This example code displays the words "Mouse clicked" in the Output panel.
    trace("family7_btn");
    familyBkgd.mainLoader.source = "hkimage/largepic/kajal_sisters.jpg";
    // End your custom code

while the photos are automatically changing, i will like it to fade in and out smoothly. How can i do that?
My AS3 code
import flash.utils.Timer;ode
import flash.events.TimerEvent;
var imgArr:Array=new Array("family.jpg","sheth_family.jpg","valani_family.jpg","hiten_brothers.jpg","the_siste rs.jpg","kajal_baa.jpg","kajal_sisters.jpg");
var path:String="hkimage/largepic/";
var i:int=1;
var timer:Timer=new Timer(7000);
timer.addEventListener(TimerEvent.TIMER,timerfn);
timer.start();
function timerfn(e:TimerEvent):void{
    if (i>=imgArr.length) i=0;
    familyBkgd.mainLoader.source =path+imgArr[i];
    trace(imgArr[i]);
    i++;
/* Mouse Click Evente
Clicking on the specified symbol instance executes a function in which you can add your own custom code.
Instructions:
1. Add your custom code on a new line after the line that says "// Start your custom code" below.
The code will execute when the symbol instance is clicked.
family1_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler);
function fl_MouseClickHandler(event:MouseEvent):void
    // Start your custom code
    // This example code displays the words "Mouse clicked" in the Output panel.
    trace("family1_btn");
    familyBkgd.mainLoader.source = "hkimage/largepic/family.jpg";
    i=0;
family2_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_2);
function fl_MouseClickHandler_2(event:MouseEvent):void
    // Start your custom code
    // This example code displays the words "Mouse clicked" in the Output panel.
    trace("family2_btn");
    familyBkgd.mainLoader.source = "hkimage/largepic/sheth_family.jpg";
    // End your custom code
    i=1;
family3_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_3);
function fl_MouseClickHandler_3(event:MouseEvent):void
    // Start your custom code
    // This example code displays the words "Mouse clicked" in the Output panel.
    trace("family3_btn");
    familyBkgd.mainLoader.source = "hkimage/largepic/valani_family.jpg";
    // End your custom code
family4_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_6);
function fl_MouseClickHandler_6(event:MouseEvent):void
    // Start your custom code
    // This example code displays the words "Mouse clicked" in the Output panel.
    trace("family4_btn");
    familyBkgd.mainLoader.source = "hkimage/largepic/hiten_brothers.jpg";
    // End your custom code
family5_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_5);
function fl_MouseClickHandler_5(event:MouseEvent):void
    // Start your custom code
    // This example code displays the words "Mouse clicked" in the Output panel.
    trace("family5_btn");
    familyBkgd.mainLoader.source = "hkimage/largepic/the_sisters.jpg";
    // End your custom code
family6_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_7);
function fl_MouseClickHandler_7(event:MouseEvent):void
    // Start your custom code
    // This example code displays the words "Mouse clicked" in the Output panel.
    trace("family6_btn");
    familyBkgd.mainLoader.source = "hkimage/largepic/kajal_baa.jpg";
    // End your custom code
family7_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_8);
function fl_MouseClickHandler_8(event:MouseEvent):void
    // Start your custom code
    // This example code displays the words "Mouse clicked" in the Output panel.
    trace("family7_btn");
    familyBkgd.mainLoader.source = "hkimage/largepic/kajal_sisters.jpg";
    // End your custom code

Genbscript automation - Making genbscript run automatically after compile.

Hello,
Is there any way where we can make the genbscript run as soon as we click on compile. What am doing now is, every time I compile, i run the genbscript seperately.
So I would like to know , is there any method where the genbscript runs automatically as soon as we compile? If so plz let me know.
Thank and Regards,
Abhishek.

What version of Siebel are you using? If you are on 8.0, in Siebel Tools go to menu item View and choose Options.
Choose the Scripting tab and enter a value in "Browser script compilation folder".
Or just have a look here:
Using Siebel Tools
http://download.oracle.com/docs/cd/B40099_02/books/UsingTools/UsingToolsTOC.html
Setting Scripting Preferences
http://download.oracle.com/docs/cd/B40099_02/books/UsingTools/UsingTools_ScriptEditors3.html#wp1109335
Axel

I'm trying to sync Outlook calendar (office 2010?win 8) with my iphone 4s. All works well when running control panel manually but it will not run automatically after that. Anyone got any ideas

I'm trying to sync outlook calendar and contacts via icloud control panel. Everything works when control panel is run manually but it will not run automatically after that. Anyone got any ideas

I am having a very similar problem. Until 12 hours ago, I was using my recently replaced 4s (with iOS7) flawlessly, receiving emails and calendar info from Exchange (Outlook 2010). But starting last night, it all stopped. I have deleted and added the account several times, tried making simple changes (considering whether the username is case sensitive, or not, etc.) and cannot fix it. I have iOS 7.04. Interestingly, the first time I changed the case to lower case, it seemed to respond immediately, and downloaded many emails with no sender, no content, and with a 12/31/69 date. Yes, 1969. And then nothing happened. Help please!

Dunning letters run automatically on a weekly basis

Hi Expert,
Is it possible to make the dunning letters run automatically on a weekly basis? If the answer is yes, then what config do we need to run the report on wekkly basis or what are the steps. Please let me know in very details, because, I am not the SD person.
Thanks

On your Router setup page set the MTU value from AUTO to Manual and change the Size from 1500 to 1350 and click on Save Settings...

How do I make the plugin run automatically when a photo is imported?

I am trying to write a new plugin where the metadata will be automatically added to the photo when I import the photo in the Lightroom.
How do I make the plugin run automatically when a photo is imported?
Thanks for your help!
Regards,
Prosenjit

psaha84 wrote:
What I want is, when I import a photo in Lightroom the plugin will run and assign the metadata.
As John said, there is no mechanism to receive notification of import. The likely recourse is continuous polling (unless you get very creative..).
You can try optimizing. e.g.: every second (or less), see if the count has changed, if it's gone up, something's been imported, if not then probably not (check anyway once in a while..).
psaha84 wrote:
How do I save the custom metadata with the image file?
Lightroom 5 has the limitation, plugin cannot link the custom metadata fields to XMP file or save them with image file.
So, is there any alternative way to save the custom metadata?
Yeah: Lightroom won't save custom metadata in xmp, nor read it if it's there, so you are pretty much on your own - you can save in a file, but if you save as non-standard sidecar Lr won't attend to it like it will jpg or xmp sidecar. For that reason it's often better to save in a separate dedicated location. You can save in image file itself, e.g. using exiftool if raw file, but that would make me nervous, and of course you'd have to have the logic to read it somewhere too..
Good luck,
Rob

Photoshop CS5 - Action is not running automatically while I trying to save PDF to JPG

My Problem in Photoshop CS5: Action is not running automatically while I trying to save PDF to JPG, in the batch process:
Followed following steps:
Opened PDF file
Created new auction (F2)
Flatten image
Save as JPG
Close file
To Run Batch:
Opened Batch dialogue box
Selected set/action name
Source: selected as “Folder”
Directed location using “Choose” button
And no selected any check boxes under the “Choose” button
Clicked “OK”
Now all the PDFs are opened one after another but not execute the selected action. Please help how to resolve for auto run.

What is part of the Action?
Could you please post a screenshot with the pertinent Panels visible?
Have you tried using Image Processor or Image Processor Pro instead of Batch?

The applications on my ipad are running automatically. Please help.

hi the applications on my ipad are running automatically. Can someone help on this. Sometimes words are getting typed automatically and sometimes its switching windows on its own.

After restore my phone this screen came,for my issue i restore 3 times for every time after restore 10-15 min working fine after that again problem start

Steps involved in Orcale apps 11i for setting a report to run automatically

I want to run a report automatically every day in oracle apps 11i.
I have created the rdf file using reports 6i and I have registered it in oracle apps. Now i would to like to know what are the procedures involved in setting this report to run automatically.Pls. help.
Thanks in advance

When you are submit your concurrent program to run
in At These Times section Go to Schedule Button section...
there you can schedule accordingly

Error while running Automatic payment

Hello guys,
We are running Automatic payment Programme Previously all the output generated properly,
but from last some days its giving an error "+Device type HPLJIIID does not support page format DINA4"**+

Hi,
Check the printer setting in SPAD transaction. You can take the help from your BASIS collegue for the same.
Regards,
SDNer

Can we schedule FSG reports to run automatically?

Hi Friends,
I am wondering whether we can schedule FSG report to run automatically as standard reports. Thanks.

Have a look at the Note:144838.1
Regards
Prashant Pathak

How to use sinewave to controll my motor run automatically.

Hello
I am now tring to use a waveform(sinwave ) to control my motor run automatically .I am using labview2010 and EPOS50/5. Is there anyone can give me your suggestion? Thanks in advance.The attachment is the program for my epos.
Attachments:
epos and sinewaveform.vi ‏34 KB

PS: My program for epos can work, but I don not know how to combine the sinewave program with the epos program to make motor run automatically.
Thanks your suggestion in advance.

QMaster doesn't run automatically?

Trying to figure this out... this just started a little while ago where I would have to seemingly run QMaster manually before compressing; otherwise, I would get "Unable to connect to background process"... it wasn't always this way, how do I get Qmaster to run automatically again?

what's odd, is i put an echo in the /etc/rc.d/network script and it's running the exact same command i'm running from the commandline
dhcpcd eth0
When it gets run from the rc.d script it times out, when i run it manually from the commanline it works fine.
When run from the script, this is the output:
Oct 19 10:30:56 localhost dhcpcd[1174]: version 5.2.12 starting
Oct 19 10:30:56 localhost dhcpcd[1174]: eth0: waiting for carrier
Oct 19 10:30:58 localhost kernel: [ 828.176125] bnx2 0000:01:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full duplex
Oct 19 10:30:58 localhost dhcpcd[1174]: eth0: carrier acquired
Oct 19 10:30:58 localhost dhcpcd[1174]: eth0: broadcasting for a lease
Oct 19 10:31:26 localhost dhcpcd[1174]: timed out
When run manually from the commandline, this is the output:
Oct 19 10:31:42 localhost dhcpcd[1187]: version 5.2.12 starting
Oct 19 10:31:42 localhost dhcpcd[1187]: eth0: broadcasting for a lease
Oct 19 10:31:43 localhost dhcpcd[1187]: eth0: offered 177.18.58.191 from 177.18.61.18
Oct 19 10:31:43 localhost dhcpcd[1187]: eth0: acknowledged 177.18.58.191 from 177.18.61.18
Oct 19 10:31:43 localhost dhcpcd[1187]: eth0: checking for 177.18.58.191
Oct 19 10:31:48 localhost dhcpcd[1187]: eth0: leased 177.18.58.191 for 3600 seconds
Oct 19 10:31:48 localhost dhcpcd[1187]: forked to background, child pid 1209
Last edited by jmandawg (2011-10-19 14:52:43)

BlackBerry Application Loader run automatically

Hello all,
When I start the “BlackBerry® Desktop Manager” the “BlackBerry® Application Loader” is run automatically. It’s a problem if my PC is not connected to INTERNET, since I can’t stop it clicking on “Cancel” and the “BlackBerry® Desktop Manager” become hanged. Therefore, I can’t use my device as an External Modem.
It is happening since I updated the “BlackBerry® Desktop Manager” to Version 5.0.1.37.
I want to configure the “BlackBerry® Desktop Manager” to ask me if I want to run the “BlackBerry® Application Loader”, in a manual way. But I have not found how to do it.
I would appreciate if one of you can help me, please.
Thanks,
L.M.R.R.

On your PC > Control Panel > Add/Remove Programs, find Desktop Manager and click on it to CHANGE the setup. Run that. At the end of the run, you will see a couple of settings, one is Check automatiically for updates. Turn that off.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How JSP run automatically

I would like to write a jsp file that can run in every 5 minutes.
My situation is that jsp file will include some sql statements which
will update a table in MS SQL Server according to some criteria.
The table need to be updated automatically to serve the business purposes.
So, i need a JSP file that can run automatically to serve this purpose.
Hope that some one can give some suggestion to me.
Thanks !

import java.util.Date;
import java.sql.*;
public class Test {
public static void main(String[] args) {
Connection conn = null;
String s1 = "";
PreparedStatement stmt = null;
ResultSet rset = null;
     while (true) {
     System.out.println("The time is "+new Date());
     try {
Thread.sleep(5*60*1000);
** place sqlserver to update table here
** example:
** java.util.Properties info = new java.util.Properties();
** info.put ("user", userid);
** info.put ("password", passwd);
** s1 = "jdbc:<database type>:thin:@" + host + ":" + port + ":" + database ;
** DriverManager.registerDriver ( new oracle.jdbc.driver.OracleDriver());
** conn = DriverManager.getConnection (s1,"scott","ctrl");
** s1 = "update table set column = ? where column = ?";
** stmt = conn.prepareStatement(s1);
** stmt.setString(1,var1);
** stmt.setString(2,vat2);
** rset = stmt.executeQuery();
** rset.close();
** stmt.close();
** conn.close();
} catch (Exception exc) {}

Making run automatically

Similar Messages

Maybe you are looking for