Making username and password casesensitive in MsAccess

Hi i am working with java JSP and MSAccess Database. i want to make username and password casesensitive in java or jsp.Please

The java.lang.String is by default case sensitive. So I don't get your point? It would be more helpful if you elaborate more detailed about the actual problem.

Similar Messages

SQL REPORTING USERNAME AND PASSWORD

I use SQL Server Reporting Services for reporting purpose and create reporting using and attach database then when I deploy any report it shows me username and password in SQL Server Reporting Service.
So what does it mean by password and username and where do I get this username and password for SQL Server Reporting Service?
i have not any password in windows and in SQL Server Database
HERE IS PICTURE
So what can I do?

Going to that link will not run/execute the report. It should either prompt you to login or login you automatically and bring you to the landing page. If you are not being prompted to login, you should consider looking at making sure all the
appropriate services are running by looking at SQL Server Configuration Manager (i.e., the database engine and reporting services). It's also possible that your browser is configured to login you automatically if you are not being prompted to login,
which could be issue if the account you are logged into your computer as is not an administrator.
The next thing to consider is disabling any antivirus or security software that may interfere with the connection. Lastly try different browsers (e.g., firefox, Chrome, and IE) and see if you are getting any different error messages. Also consider
substituting "lenovo-pc" with "localhost". I have also seen the issue described in this article where you may need to disable the loopback check.
http://www.sqlservercentral.com/blogs/sqldownsouth/2009/09/28/reporting-services-disable-loop-back-check/
You aren't going to be able to deploy anything unless you can connect to SSRS via a web browser.

Username and password do not get applied to WS Invocations in PS3 project

I am running into a situation where username and password do not get applied to WS Invocations in PS3 project I am deploying using config plan, this is used to work correctly in PS2. Did the syntax for the deployment configuration plans for PS3 BPM have changed?
This is the error that I am getting from the BPM soa_server.log file:
<Feb 9, 2011 1:04:16 PM PST> <Error> <oracle.wsm.resources.enforcement> <WSM-07501> <Failure in Oracle WSM Agent processRequest, category=security, function=agent.function.client, application=default, composite=SpringWorkflow, modelObj=ActivityService, policy=oracle/wss_username_token_client_policy, policyVersion=null, assertionName={http://schemas.oracle.com/ws/2006/01/securitypolicy}wss-username-token.
oracle.wsm.common.sdk.WSMException: WSM-00015 : The user name is missing.
Caused by: oracle.fabric.common.PolicyEnforcementException: WSM-00015 : The user name is missing.
at oracle.fabric.common.AbstractSecurityInterceptor.processResult(AbstractSecurityInterceptor.java:239)
at oracle.fabric.common.BindingSecurityInterceptor.processRequest(BindingSecurityInterceptor.java:95)
I enabled ws logging for incoming and outgoing P6 web service requests, I see that the BPM server is not making an outgoing webservice call, looking more into the log file from soa_server.log I see that the exception is a PolicyEnforcementException confirming my suspicion that the username and password from the deployment config plan are not getting applied at runtime. This is used to work correctly in PS2. Any suggestions?
Config-plan:
<reference name="ActivityService">

<binding type="ws">
<attribute name="port">
<replace>http://xmlns.oracle.com/Primavera/P6/WS/Activity/V1#wsdl.endpoint(ActivityService/ActivityPort)</replace>
</attribute>
<attribute name="location">
<replace>http://x.x.x.x:7001/p6ws/services/ActivityService?wsdl</replace>
</attribute>
<property name="weblogic.wsee.wsat.transaction.flowOption">
<replace>WSDLDriven</replace>
</property>
<property name="oracle.webservices.auth.username">
<replace>admin</replace>
</property>
<property name="oracle.webservices.auth.password">
<replace>admin</replace>
</property>
</binding>
</reference>
Deployment Log from Jdev:
[04:05:01 PM] ---- Deployment started. ----
[04:05:01 PM] Target platform is (Weblogic 10.3).
[04:05:01 PM] Running dependency analysis...
[04:05:01 PM] Building...
[04:05:11 PM] Deploying profile...
[04:05:11 PM] Updating revision id for the SOA Project 'SpringWorkflow.jpr' to '1.0'..
*[04:05:11 PM] Copying file:/E:/dev/bpm11g/springdemo/SpringWorkflow/SpringWorkflow_cfgplan.xml to soaconfigplan.xml*
[04:05:11 PM] Adding soaconfigplan.xml to archive.
[04:05:11 PM] Wrote Archive Module to E:\dev\bpm11g\springdemo\SpringWorkflow\deploy\sca_SpringWorkflow_rev1.0.jar
[04:05:11 PM] Deploying sca_SpringWorkflow_rev1.0.jar to partition "default" on server soa_server1 [x.x.x.x:8001]
[04:05:11 PM] Processing sar=/E:/dev/bpm11g/springdemo/SpringWorkflow/deploy/sca_SpringWorkflow_rev1.0.jar
[04:05:11 PM] Adding sar file - E:\dev\bpm11g\springdemo\SpringWorkflow\deploy\sca_SpringWorkflow_rev1.0.jar
[04:05:11 PM] Preparing to send HTTP request for deployment
[04:05:11 PM] Creating HTTP connection to hostx.x.x.x port:8001
[04:05:13 PM] Sending internal deployment descriptor
[04:05:13 PM] Sending archive - sca_SpringWorkflow_rev1.0.jar
[04:05:15 PM] Received HTTP response from the server, response code=200
[04:05:15 PM] Successfully deployed archive sca_SpringWorkflow_rev1.0.jar to partition "default" on server soa_server1 [x.x.x.x:8001]
[04:05:15 PM] Elapsed time for deployment: 14 seconds
[04:05:15 PM] ---- Deployment finished. ----

We should take a look at the log files to see what's really going on but if you haven't done anything with the installation yet then "reinstalling" is very easy.
In the directory where you launched the jar file, you should find a directory named "crx-quickstart". Simply rename this directory to "crx-quickstart.old" and restart the jar file. Your new environment will be ready in a couple of minutes. Keep the old directory and look into the [your directory]\crx-quickstart\logs directory for details on your original problem.

Supplying username and password to repository via code

Hi There,
Is there a way to supply the username and password to the webdav repository via code or in the address line? We have an ActiveX object accessing files and would like to avoid the repository prompting.
Thanks

With Script I can do it as follows.. See VerifyConnection
Option Explicit
Const iTimeOutInSecs = 60
Const ForWriting = 2
Rem ************** MAIN *****************
main
Wscript.quit
Sub Main
Dim WShell, FileSystem
Dim davControl
Dim objArgs, targetPath, serverURL, username, password, rootFolder, filter
Dim fileUploadList, result
Dim folderList, filelist
Dim status
Dim spoolFile
Set wShell     = WScript.CreateObject("WScript.Shell")
Set fileSystem = WScript.CreateObject("Scripting.FileSystemObject")
Set spoolFile = fileSystem.OpenTextFile("httpUploadLoad.log", ForWriting, True)
Set objArgs = WScript.Arguments
targetPath = objArgs(0)
serverUrl   = objArgs(1)
username    = objArgs(2)
password    = objArgs(3)
rootFolder = objArgs(4)
If objArgs.length = 6 Then
    filter    = objArgs(5)
Else
    filter = Empty
End If
Set fileUploadList = CreateObject("Msxml2.DOMDocument.4.0")
fileUploadList.async = False
result = fileUploadList.load(targetPath)
If (result = False) Then
    MsgBox "Failure while loading or parsing file : " & targetPath,vbCritical
    Wscript.quit
End If
Set davControl = new DavControlClass
davControl.setServer serverURL, username, password
davControl.setSpoofile(spoolfile)
status = verifyHttpConnection(davControl, username)
Set folderList = fileUploadList.documentElement.selectNodes("/Upload/directories/directory")
createFolders davControl, rootFolder, folderList, username, password, filter
Set fileList = fileUploadList.documentElement.selectNodes("/Upload/files/file")
uploadFiles davControl, rootFolder, fileList, username, password, filter
spoolfile.close()
End Sub
Function verifyHttpConnection(davControl,username)
Dim status, targetFolder
targetFolder = "/home/" & username
status = davControl.verifyConnection(targetFolder)
verifyHttpConnection = status
End Function
Sub createFolders(davControl, rootFolder, folderList, username, password, filter)
Dim i, targetFolder, targetFolderPath
For i = 0 to folderList.length - 1
    Set targetFolder = folderList.item(i)
    targetFolderPath = rootFolder & targetFolder.text
    If IsNull(filter) or (InStr(targetFolder.text,filter) = 1) Then
      'wscript.echo "Making " & targetFolderPath
      davControl.makeDir targetFolderPath,true
    End If
Next
End Sub
Sub uploadFiles(davControl, rootFolder, fileList, username, password, filter)
Dim i, targetFile, targetFilename, localFilename
For i = 0 to fileList.length - 1
    Set targetFile = fileList.item(i)
    targetFilename = rootFolder & targetFile.text
    localFilename = Right(replace(targetFile.text,"/","\"),Len(targetFile.text)-1)
    If IsNull(filter) or (InStr(targetFile.text,filter) = 1) Then
      'wscript.echo "Uploading " &localFilename & " as " & targetFilename
      davControl.uploadFile localFIlename, targetFileName, "FORCE"
    End If
Next
End Sub
Class DavControlClass
Private HTTPUser
Private HTTPPassword
Private HTTPServer
Private installParameters
Private windowsShell
Private XMLHTTP_CLASS_ID
Private HttpObject
Private spoolFile
Dim     folderStatusList
Private Sub Class_Initialize()
    XMLHTTP_CLASS_ID = "Msxml2.XMLHTTP.6.0"
    Set HttpObject = CreateObject(XMLHTTP_CLASS_ID)
    folderStatusList = Empty
End Sub
Public Sub setSpoofile(file)
    Set spoolFile = file
End Sub
Public Sub setParameters(wshell, params)
    Set installParameters = params
    Set windowsShell = wShell
    setServer params.getServerURL(), params.getUser(), params.getPassword()
End Sub
Public Sub setServer(serverURL,serverUser,serverPassword)
    HTTPServer   = serverURL
    HTTPUser     = serverUser
    HTTPPassword = serverPassword
End Sub
Public Function getServerURL
    getServerURL= HTTPServer
End Function
Public Function verifyConnection(target)
    On Error Resume Next
    HttpObject.Open "HEAD", HTTPServer & target, false, HTTPUser, HTTPPassword
    If Err.Number <> 0 Then
      WScript.echo "verifyConnection() - Fatal Error encountered accessing : " & HTTPServer & target & ". Status (" & Hex(Err.number) & ") " & Err.Description
      Wscript.quit
    End If
    On Error GoTo 0
    HttpObject.setRequestHeader "Content-type", "text/xml"
    HttpObject.setRequestHeader "Depth", "1"
    On Error Resume Next
    HttpObject.send ("")
    If Err.Number <> 0 Then
      WScript.echo "resetConnection() - Fatal Error encountered accessing : " & HTTPServer & target & ". Status (" & Hex(Err.number) & ") " & Err.Description
      Wscript.quit
    End If
    On Error GoTo 0
    If HTTPObject.status <> 200 Then
      MsgBox "Unable to access " & getServerURL() & target & ". HTTP Status = " & HTTPObject.status & ". Please correct installParameters.xml and restart Installation",vbCritical
      Wscript.quit
    End If
    spoolfile.writeline "HTTP Successfully Connected to '" & getServerURL() & target
    verifyConnection = HTTPObject.status
End Function
Public Function uploadFile (local, remote, mode)
    Dim returnCode, rc
    returnCode = doHead(remote)
    If returnCode = 401 Then
      MsgBox "uploadFile() - Unauthorized (Status (" & returnCode & "). Unable to upload '" & local & "' into '" & remote & "'. Please check installParameters.xml and log files.",vbCritical
      Wscript.quit
    End If
    If returnCode = 200 Then
      If mode = "ERROR" Then
        MsgBox "uploadFile() - Installation Failed. Resource Exists : '" & remote & "'. Please check installParameters.xml and restart Installation",vbCritical
        Wscript.quit
      End If
      If mode = "SKIP" Then
        uploadFile = returnCode
        Exit Function
      End If
      If mode = "FORCE" Then
        rc = doDelete(remote)
      End If
    End If
    uploadFile = doPut (local, remote, null)
    If uploadFile = 500 Then
      MsgBox "UploadFile() - Upload Failed (Status (" & uploadFile & "). Unable to upload '" & local & "' into '" & remote & "'. Retry in Progress.",vbCritical
      uploadFile = doPut (local, remote, null, user, password)
      If uploadFile = 500 Then
        MsgBox "UploadFile() - Installation Failed (Status (" & uploadFile & "). Unable to upload '" & local & "' into '" & remote & "'. Please check installParameters.xml and log files.",vbCritical
        Wscript.quit
      End If
    End If
    If uploadFile = 401 Then
      MsgBox "UploadFile() - Unauthorized (Status (" & uploadFile & "). Unable to upload '" & local & "' into '" & remote & "'. Please check installParameters.xml and log files.",vbCritical
      Wscript.quit
    End If
End Function
Public Function makeDir(targetFolder,force)
    Dim Status, ParentFolder
    status = doHEAD(targetFolder)
    If not IsEmpty(folderStatusList) Then
      folderStatusList.add targetFolder, status
    End If
    If (status = 404 or status = 409) and force Then
      parentFolder = Mid(targetFolder,1,InStrRev(targetFolder,"/")-1)
      makeDir parentFolder,true
      status = doMKCOL(targetFolder)
    End If
    makeDir = status
    If status = 401 Then
      MsgBox "doMKCOL() - Unauthorized (Status (" & status & "). Unable to create '" & targetFolder & "'. Please check installParameters.xml and log files.",vbCritical
      Wscript.quit
    End If
End Function
Public Function doHEAD(remote)
    ' Dim HttpObject
    ' Set HttpObject = CreateObject(XMLHTTP_CLASS_ID)
    ' HttpObject.Open "HEAD", HTTPServer & remote, false, user, password
    HttpObject.Open "HEAD", HTTPServer & remote, false
    HttpObject.setRequestHeader "Content-type", "text/xml"
    HttpObject.setRequestHeader "Depth", "1"
    On Error Resume Next
    HttpObject.send ("")
    If Err.Number <> 0 Then
      WScript.echo "doHEAD() - Fatal Error encountered accessing : " & HTTPServer & remote & ". Status (" & Hex(Err.number) & ") " & Err.Description
      Wscript.quit
    End If
    On Error GoTo 0
    doHead = HttpObject.status
End Function
Public Function doPUT(local,remote,contentType)
    Dim tmStart
    Dim tmCurr
    Dim iTimeTaken
    Dim currentStatus
    Dim ado_stream
    Dim uploadCount, uploadStatus
    Set ado_stream = CreateObject("ADODB.Stream")
    ado_stream.Type = 1
    ado_stream.Open()
    On Error Resume Next
    ado_stream.LoadFromFile(local)
    If Err.Number <> 0 Then
      WScript.echo "doPUT() - Fatal Error encountered reading File : " & local & ". Status (" & Hex(Err.number) & ") " & Err.Description
      Wscript.quit
    End If
    On Error GoTo 0
    HttpObject.Open "PUT", HTTPServer & remote, false
    If not IsNull(contentType) Then
      HttpObject.setRequestHeader "Content-type", contentType
    End If
    tmStart = Now
    On Error Resume Next
    HTTPObject.send(ado_stream.Read(-1))
    If Err.number <> 0 Then
      ' Unexpected errors can occur as a result of the HTTP request being passed to wrong database instance
      ' when multiple databases are using the same listener.
      WScript.echo "doPUT() - Fatal Error encountered uploading File : " & local & ". Status (" & Hex(Err.number) & ") " & Err.Description
      WScript.quit
   Else
      currentStatus = HTTPObject.status
    End If
    On Error GoTo 0
    uploadCount = 1
    uploadStatus = doHead(remote)
    Do While uploadStatus <> 200 and uploadCount < 6
      ' Unexpected errors can occur as a result of the HTTP request being passed to wrong database instance
      ' when multiple databases are using the same listener.
      spoolfile.writeline "Http Error encountered uploading " & local & " to " & HTTPServer & remote &". Status=" & currentStatus
      currentStatus = retryPUT(local,remote,contentType)
      uploadCount = uploadCount + 1
      uploadStatus = doHead(remote)
    Loop
    If uploadStatus = 200 Then
      tmCurr = Now
      spoolFile.writeLine "Uploaded File " & local & ". Elapsed Time = " & CInt(DateDiff("s", tmStart, tmCurr)) & " seconds."
    Else
      WScript.echo "doPUT - Fatal Error uploading file (" & HTTPServer & remote & ") : Status=" & HTTPObject.status
      WScript.quit
    End If
    doPut = currentStatus
    ado_stream.Close()
End Function
Public Function retryPUT(local,remote,contentType)
    Dim ado_stream
    Set ado_stream = CreateObject("ADODB.Stream")
    ado_stream.Type = 1
    ado_stream.Open()
    On Error Resume Next
    ado_stream.LoadFromFile(local)
    If Err.number <> 0 Then
      WScript.echo "doPUT() - Fatal Error encountered reading File : " & local & ". Status (" & Hex(Err.number) & ") " & Err.Description
      Wscript.quit
    End If
    On Error GoTo 0
    HttpObject.Open "PUT", HTTPServer & remote, true
    If not IsNull(contentType) Then
      HttpObject.setRequestHeader "Content-type", contentType
    End If
    On Error Resume Next
    HTTPObject.send(ado_stream.Read(-1))
    If Err.Number <> 0 Then
      ado_stream.Close()
      WScript.echo "doPUT() - Fatal Error encountered sending File : " & local & " to " & HTTPServer & remote &". Status (" & Hex(Err.number) & ") " & Err.Description & ". Retrying ...."
      Wscript.quit
    Else
      Do While HTTPObject.readyState <> 4
        WScript.Sleep(1000)
      Loop
    End If
    On Error GoTo 0
    ado_stream.Close()
    retryPut = HTTPObject.status
End Function
Public Function doMKCOL(remote)
    ' wscript.echo "doMKCOL (" & HTTPServer & remote & ")"
    Dim currentStatus
    HttpObject.Open "MKCOL", HTTPServer & remote, false
    HttpObject.setRequestHeader "Content-type", "text/xml"
    On Error Resume Next
    HttpObject.send("")
    If Err.Number <> 0 Then
      WScript.echo "doMKCOL() - Fatal Error encountered making Folder : " & HTTPServer & remote &". Status (" & Hex(Err.number) & ") " & Err.Description
      Wscript.quit
    End If
    On Error GoTo 0
    If HTTPObject.status <> 201 Then
      WScript.echo "doMKCOL() - Fatal Error encountered making Folder : " & HTTPServer & remote &". Status (" & HTTPObject.status & ")."
      Wscript.quit
    End If
    doMKCOL = HTTPObject.status
End Function
Public Function doDELETE(remote)
    HttpObject.Open "DELETE", HTTPServer & remote, false
    HttpObject.setRequestHeader "Content-type", "text/xml"
    On Error Resume Next
    HttpObject.send("")
    If Err.Number <> 0 Then
      WScript.echo "doMKCOL() - Fatal Error deleting : " & HTTPServer & remote &". Status (" & Hex(Err.number) & ") " & Err.Description
      Wscript.quit
    End If
    On Error GoTo 0
    doDELETE = HTTPObject.status
    If HTTPObject.status <> 201 and HTTPObject.status <> 204 and HTTPObject.status <> 207 and HTTPObject.status <> 404 Then
      wscript.echo "doDELETE (" & HTTPServer & remote & ") : Status=" & HTTPObject.status
    End If
End Function
End Class

Copying files from local computer to a remote server which is not in Domain and with username and password?

"I have one workstation with static IP, Wants to create batch file to log in to this,using user name and password, copy back up files from that workstation to my desktop with batch file, please help
I am currently using batch file for back up for domain servers with robocopy commands in batch file but one of the workstation is not in domain and has static ip , also it has username and password,
Wants to create batch file on my desktop to log in this server---with username and password,, copy files from particular folder and paste it on my desktop in particular folder or auto create that folder,
please help, "
P Dave

JRV,
I can understand that, 1stly I am not a scripting guy, I know very very basic of this,
2ndly, I need help , I am not asking anyone here to write code for me, I have already wrote that but its not doing which its suppose to do,
check below screen shot, after running suggested script, it has mapped drive ,
now I do not want to do that, I want just files to copy from that machine to my machine, and want script which I can run from any PC,
Tried with UNC PATH as well, but not making any difference, its keep mapping that server drive to my computer
P Dave
JRV,
I can understand that, 1stly I am not a scripting guy, I know very very basic of this,
2ndly, I need help , I am not asking anyone here to write code for me, I have already wrote that but its not doing which its suppose to do,
check below screen shot, after running suggested script, it has mapped drive ,
now I do not want to do that, I want just files to copy from that machine to my machine, and want script which I can run from any PC,
Tried with UNC PATH as well, but not making any difference, its keep mapping that server drive to my computer
P Dave
Bill - he still sees that "connection" although it isn't mapped it is attached temporarily.
P - Log off and log back on and the attached connection will be gone. It is temporary. Again - knowing the basics of WIndows would let you know this.
We have given you all of the answers that are possible. There is no other way unless you have installed things like PowerShell and PowerShell remoting or an FTP server.
If you do use a drive it can be just as easily deleted after you have finished the copy.
Again: "NET USE /?" will tell you all of the options.
Saying you know nothing is not an excuse for not thinking or looking more deeply into the suggestions made by those trying to help you. This is not a MIcrosoft support forum or help desk. It is a forum for admiinistrative scripting and assumes
that those coming here are technically trained or experienced in the basics of Windows technology.
¯\_(ツ)_/¯

What are EBS Database Username and Password

Hi Freinds .........just installed EBS Successfully..............When i am using SQL PLus as "Conn / as sysdba"
it is not connecting as similar to Oracle 9i/10G.............can u please Tell me what are The Default usernames and Passwords are ???]
Thanks In Advance

Hi user;
i have installed Oracle R12If you are making E-Business Suite installation by default 2 env file is creating. One is for dbtier other is for application tier. If you want to work wiht some job related wiht EBS on your OS, than you have to source(run) those env file. For instance if you want to apply patch for your Application than you need to login as applmgr user than you have to source env file, for can run adadmin or adpatch utulity
It same for db side too
All those are covers under R12 Application Concept manuel, please check below:
For r12.1.1:
http://download.oracle.com/docs/cd/B53825_01/current/html/docset.html
For r12:
http://download.oracle.com/docs/cd/B40089_10/current/html/docset.html
Regard
Helios

Word 2010 prompts for username and password when opening a document on trusted website

Hi Guys,
We have a website (not sure if the site is a sharepoint site) on our trusted domain that asked for username and password when trying to access it. I added the site to our trusted sites zone and this resolved the issue however when I try to open word documents
I get prompted for usernames and password again if I cancel the credentials box the document opens with no issues.
Below is some of the steps i have taken
- Tried opening other non office documents (e.g. PDF, JPEG) and they open with no issues
- Tried to opening the word documents with a system that only had word pad install and not Office 2010 and the documents open with no issues so it looks like it's an office 2010 problem
Can you please advise how I can resolve this issue and if this is a client issue or an issue on the web server thanks

Hi,
This issue is caused by the Office suit itself. When Internet Explorer opens an Office document, the appropriate Office application is started with the path of the document. The Office application then tries to access the document directly from
the server. This differs from other browsers and other file types. Most browsers download the file and call the application to open the file from the local cache. However, when this occurs, if the opened file is changed and saved,
the changes are only made to the local copy and not to the server copy.
To establish the richest experience possible, the first thing that the Office application does is communicate with the server to determine the server type and what web authoring protocol is available. The application does this by making
an OPTIONS request directly to the server.
As a new process accessing the server, the Office application is required to renegotiate authentication. This method is more secure than a method in which the new process uses an existing authentication that was established by the browser.
Please try the following methods:
An alternative with full functionality but with a calculated risk
Client approaches that can reduce the impact
Alternative configurations when the web server does not support DAV or reduced functionality is acceptable
For more detail information, please refer to the following link:
http://support.microsoft.com/kb/2019105/en-us
Thanks
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

Email setup asking for Username and Password.

I recently backed up my phone on my computer and ever since I did, it's like all of my personal settings were deleted as well. For instance, I had to fix my all of my profiles sounds after backing up, and I went to my Blackberry Appworld, scrolled over to My Appworld and it says 'no downloads' and I have downloaded a lot of applications. That's not really a problem for me, as long as I get messages when updates come out for the apps...? Now, I am trying to setup another email address and when going to 'email setup wizard', I am being prompted for a Username and Password. I don't remember ever making a username or password for email setup, but was able to firgure out I could put my PIN in for my password to be sent, which it was. BUT I still do not know what my username is, and I've tried my email addresses with and without what's after the @ and still no luck. Could somebody please help me resolve this problem?

You must have done something more than just a simple backup -- a backup does not change device settings or preferences or write anything to the handheld.
As far as the email setup, it should not be your email address, it's whatever you created, perhaps the first part of your email, the part before the @ ?
but you must know it to proceed. Or, call your carrier and ask to have the BIS account reset (basically they shoudl delete it and recreate it for you).
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

One username and password not being added to keychain

I have entered a username and password for a webpage and answered yes when asked it I wanted this saved it to my keychain.
However I can not find the u/n and pass word in my keychain (Safari>Preferences>Passwords) and this u/n and pw is not shared with my other devices. All my other u/n and pw are in my keychain and are shared with all my other devices.
Can I manually add a u/n and pw to my keychain?

Hi Matt,
I did previously have "Private Browsing" selected and deselected that and that is when I could set up FF with my username and pw but could not on Wells Fargo. So, I did what you suggested and that was to delete cookies because that seemed like a good reason but alas, it still will not give me the option to set up the username/pw.
I would not be surprised if it is Wells Fargo, they are a bit of a pain. You cannot even save them in Bookmarks because I was told they are constantly making changes to their site and this stops the bookmark from working.

Trying to cet up configuration of new 303 phone - asls for username and password

Hi
(UK user here)
I have just had installed a BT VOIP line on my broadband.
I have bought a Cisco SPA 303 phone to use on it. This is plugged in and I can see that it is connecting to the DHCP server etc.
When i use the browser based utility to setup the phone (i.e. I type in 192.168.1.68 - the phone's IP address) it opens the simple utility page on the phone OK, but as soon as i try to save any of the SIP information to make the phone work, it requests a username ("spa user") and password when I want to setup the phone with the domains etc.
In documentation and online here I can only find reference to 'admin' and 'admin' as username and password, but these don't work.
I have done a factory reset on the phone menu; in the browser it still asks for username and password.
Help please? Or should I just bite the bullet and order the BT provided pre-configured handset instead?

ACTUALLY Now realise the question you ask is different from the solution/issue I report on here, that after I unlocked my Cisco phones they still wouldn't work properly with the BT VOIP service (I say service but really it should be called a 'disgrace'). See below for what i remember about unlocking:
Oh, I didn''t really solve it - turned out that the BT service uses proprietary code in their VOIP service, so we could never get the Ciscos set up properly. Furthermore the solution BT had sold me was duff, they hadn't listened to my needs and requirements (one of which was multiple extensions able to transfer calls etc, which the simple BT service couldn't do).
Instead I cancelled the BT service and got back all the line charges etc as they agreed it had been misrepresented. I then subscribed to a VOIP service provider called Voipfone, based in London Docklands, who got me up and running in about 20 minutes from start to finish, using the Ciscos!!! I cannot praise their levels of service and knowledge enough, I have converted all our company's lines into VOIP and use them, it is cheap and excellent. If you want more info just give me a shout.
Admin username and password.
I am struggling to remember what I did now. I think it was making a complete factory reset, after which I think there is no password you just point browser at <ip address>/admin
But how did I do a reset when it is protected by the password that has been set? I think I found a series of commands to put in the phone directly (rather than via browser) to reset it. Sorry for my confusion but it was over a year ago. It is certainly do-able, because I managed it.
But I stand by my answer above, seriously, bin BT and go to VOIPfone (or another 3rd party offering full hosted sip, my experience with them has so far been excellent.

Username and password with Access and JDBC application

Hello all,
I have written an application which accesses a MS Access database. I have created a dialog which asks the user for a username and password. I then include the username and password to connect to the database. I have created groups and users in the Access database and have given each user different privaleges. However, when I run my application, any user can get any privelage. I am missing something. Thanks in advance.

// ConnectToDatabase.java
// Copyleft (c) 2001 RatKing
// ��Java Bean
// E-mail: [email protected]
// This can use in JSP or Java Application or Applet
// AFTER you have setup the ODBC source in Windoz.
package rat;
import java.sql.*;
import java.util.*;
public class ConnectToDatabase{
private String driverClass = "sun.jdbc.odbc.JdbcOdbcDriver"; // JDBC-ODBC Bridge Driver
private String dbURL = "jdbc:odbc:yourdbname"; // the name of your ODBC Source's Database
private String userName = "yourname"; // user ID
private String password = "yourpassword"; // user password
private Connection connection = null; // Connection to the Database
private Statement statement = null; // Statement object
public ConnectToDatabase () {
// ��
public Connection getConnection() throws ClassNotFoundException, SQLException {
if(connection != null) {
return connection;
Class.forName(driverClass);
connection = DriverManager.getConnection(dbURL, userName, password);
return connection;
} // getConnection()
public void closeConnection() throws SQLException {
if (connection != null) {
// Makes all changes made since the previous commit/rollback permanent
// and releases any database locks currently held by this Connection object.
if (!connection.getAutoCommit())
connection.commit();
closeStatement();
connection.close();
connection = null;
} // closeConnection()
* If not connected to database...connect to database, create a statement,
* and, return the Statement.
protected void createStatement() throws SQLException, Exception {
if(statement == null) {
Connection connection = getConnection();
statement = connection.createStatement();
* This method executes a statement and returns true or false. Any type
* of Statement may be executed by this command.
public boolean execute(String sqlString) throws SQLException, Exception {
if(statement == null){
createStatement();
boolean returnValue = statement.execute(sqlString);
return returnValue;
* This method executes the statement and returns a ResultSet from
* execution of the query. Only a SELECT Statemet is applicable here.
public ResultSet executeQuery(String sqlString) throws SQLException, Exception {
if(statement == null){
createStatement();
ResultSet rs = statement.executeQuery(sqlString);
return rs;
* This method executes update statements and returns a count of
* the updates. Only a INSERTS, DELETES, and UPDATES are applicable here.
* In addition, SQL statements that return nothing such as SQL DDL statements
* can be executed.
public int executeUpdate(String sqlString) throws SQLException, Exception {
if(statement == null){
createStatement();
int returnValue = statement.executeUpdate(sqlString);
return returnValue;
* This method closes the Statement.
public void closeStatement() throws SQLException {
if(statement != null){
statement.close();
statement = null;
* If it is not connected to database, connect to database and
* create a statement and returns the Statement
* @param scrollType should be ResultSet.TYPE_FORWARD_ONLY
* or ResultSet.TYPE_SCROLL_INSENSITIVE
* or ResultSet.TYPE_SCROLL_SENSITIVE
* @param updateType should be ResultSet.CONCUR_READ_ONLY or
* ResultSet.CONCUR_UPDATABLE ;
protected Statement getStatement(int scrollType, int updateType)
throws SQLException, Exception {
Connection connection = getConnection();
// for cloudscape to work with scrollable resultsets, the autocommit
// should be false.
connection.setAutoCommit(false);
Statement statement = connection.createStatement(scrollType,
updateType);
return statement;
* If it is not connected to database, connect to database and
* create a preparestatement and returns the Statement
* @param sqlString queryString to make a statement
* @param scrollType should be ResultSet.TYPE_FORWARD_ONLY
* or ResultSet.TYPE_SCROLL_INSENSITIVE
* or ResultSet.TYPE_SCROLL_SENSITIVE
* @param updateType should be ResultSet.CONCUR_READ_ONLY or
* ResultSet.CONCUR_UPDATABLE ;
protected PreparedStatement getStatement(String sqlString,
int scrollType,
int updateType) throws SQLException,
Exception {
Connection connection = getConnection();
// for cloudscape to work with scrollable resultsets, the autocommit
// should be false.
connection.setAutoCommit(false);
PreparedStatement preparedStatement =
connection.prepareStatement(sqlString, scrollType, updateType);
return preparedStatement;
* this method executes the statement and resuts the resultSet due to
* execution of Statement.
* only SELECT Statemet is applied here.
public ResultSet executeQueryScrollInsensitiveReadOnly(String sqlString,
Vector values) throws SQLException, Exception {
PreparedStatement preparedStatement = getStatement(sqlString,
ResultSet.TYPE_SCROLL_INSENSITIVE,
ResultSet.CONCUR_READ_ONLY);
for (int i = 1; i <= values.size(); i++) {
preparedStatement.setObject(i, values.elementAt(i - 1));
// Execute a SQL statement that returns a single ResultSet.
ResultSet rs = preparedStatement.executeQuery();
return rs;
* this method executes the statement and resuts the resultSet due to
* execution of Statement. only SELECT Statemet is applied here.
public ResultSet executeQueryScrollInsensitiveReadOnly(String sqlString)
throws SQLException, Exception {
Statement statement = getStatement(ResultSet.TYPE_SCROLL_INSENSITIVE,
ResultSet.CONCUR_READ_ONLY);
// Execute a SQL statement that returns a single ResultSet.
ResultSet rs = statement.executeQuery(sqlString);
return rs;
* this method executes the statement and returns the resultSet due to execution
* of Statement. only SELECT Statemet is applied here.
public ResultSet executeQueryScrollForwardOnly(String sqlString,
Vector values) throws SQLException, Exception {
PreparedStatement preparedStatement = getStatement(sqlString,
ResultSet.TYPE_FORWARD_ONLY, ResultSet.CONCUR_READ_ONLY);
for (int i = 1; i <= values.size(); i++) {
preparedStatement.setObject(i, values.elementAt(i - 1));
// Execute a SQL statement that returns a single ResultSet.
ResultSet rs = preparedStatement.executeQuery();
return rs;
* this method executes the statement and returns the resultSet due to
* execution of Statement. only SELECT Statemet is applied here.
public ResultSet executeQueryScrollForwardOnly(String sqlString)
throws SQLException, Exception {
Statement statement = getStatement(ResultSet.TYPE_FORWARD_ONLY,
ResultSet.CONCUR_READ_ONLY);
// Execute a SQL statement that returns a single ResultSet.
ResultSet rs = statement.executeQuery(sqlString);
return rs;
* Method executeQueryScrollSensitiveReadOnly
* @param sqlString String
* @param values Vector
* @return ResultSet returns ResultSet due to statement execution
* @throws Exception
* @throws SQLException
* @see
public ResultSet executeQueryScrollSensitiveReadOnly(String sqlString,
Vector values) throws SQLException, Exception {
PreparedStatement preparedStatement = getStatement(sqlString,
ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_READ_ONLY);
for (int i = 1; i <= values.size(); i++) {
preparedStatement.setObject(i, values.elementAt(i - 1));
// Execute a SQL statement that returns a single ResultSet.
ResultSet rs = preparedStatement.executeQuery();
return rs;
* Method executeQueryScrollSensitiveReadOnly
* @param sqlString
* @return
* @throws Exception
* @throws SQLException
* @see
public ResultSet executeQueryScrollSensitiveReadOnly(String sqlString) throws SQLException, Exception {
Statement statement = getStatement(ResultSet.TYPE_SCROLL_SENSITIVE,
ResultSet.CONCUR_READ_ONLY);
// Execute a SQL statement that returns a single ResultSet.
ResultSet rs = statement.executeQuery(sqlString);
return rs;
//////////////Other things maybe useful ///////////////////
# Refer to Appendix A for more info on configuring the JDBC
# driver via setting of the DRIVER_CLASS and DATABASE_URL properties
#JDBC Driver Class
# for ODBC Driver:
#DRIVER_CLASS=sun.jdbc.odbc.JdbcOdbcDriver
# for Oracle Driver
#DRIVER_CLASS=jdbc.oracle.driver.OracleDriver
# for CloudScape Driver equipped with J2EE reference implementation
#DRIVER_CLASS=RmiJdbc.RJDriver
# for CloudScape Driver equipped with BEA Weblogic Server
DRIVER_CLASS=COM.cloudscape.core.JDBCDriver
#Database URL
# for ODBC URL
#DATABASE_URL=jdbc:odbc:tShirts
# for Oracle URL
#DATABASE_URL=jdbc:oracle:thin:@localhost:1521:ORCL
# for URL with CloudScape equipped with J2EE reference implementation
#DATABASE_URL=jdbc:rmi:jdbc:cloudscape:beeshirtsdb
# for URL with CloudScape equipped with BEA Weblogic Server
DATABASE_URL=jdbc:cloudscape:D:\\weblogic\\eval\\cloudscape\\beeshirts
#UserName to connect to database
UserName=TSHIRTS
#Password to connect to database
Password=TSHIRTS
#otherParameters
SUB_PROPERTIES=
#SQL Query
SQL_QUERY_STATEMENT = SELECT * FROM TSHIRTS.CUSTOMER
#SQL Update , if you run this program please change the id 129 to different value each time
SQL_UPDATE_STATEMENT = INSERT INTO TSHIRTS.CUSTOMER VALUES ('129','Sam','Cheng','S','123 Sam St.', 'C3','Baltimore','MD','20222','4104444444' ,'[email protected]')
#Join STATEMENT
SQL_QUERY_STATEMENT_JOIN = SELECT TSHIRTS.CUSTOMER.*, TSHIRTS.ORDERS.* FROM TSHIRTS.CUSTOMER, TSHIRTS.ORDERS WHERE CUSTOMER.CUSTOMER_ID = ORDERS.CUSTOMER_ID_FK
#OUTER JOIN for ORACLE
#SQL_QUERY_STATEMENT_OUTER_JOIN = SELECT CUSTOMER.* FROM TSHIRTS.CUSTOMER,STATE WHERE CUSTOMER.STATE(+) = STATE.CODE(+)
#OUTER JOIN for MSACCESS
#SQL_QUERY_STATEMENT_OUTER_JOIN = SELECT C.* , S.* FROM CUSTOMER C OUTER JOIN STATE S on C.STATE = S.CODE
#OUTER JOIN for MSACCESS and Cloudscape
SQL_QUERY_STATEMENT_OUTER_JOIN = SELECT C.* , S.* FROM TSHIRTS.CUSTOMER C LEFT OUTER JOIN TSHIRTS.STATE S on C.STATE = S.CODE
#SQL Statement with Like for MSACCESS
#SQL_QUERY_STATEMENT_WITH_LIKE = SELECT CUSTOMER.* FROM CUSTOMER WHERE CUSTOMER.FIRST_NAME LIKE \'*R*\'
#SQL Statement with Like for ORACLE and Cloudscape
SQL_QUERY_STATEMENT_WITH_LIKE = SELECT * FROM TSHIRTS.CUSTOMER WHERE FIRST_NAME LIKE '%R%'
#Prepared QUERY Statement
PREPARED_SQL_QUERY_STATEMENT = SELECT * FROM TSHIRTS.CUSTOMER WHERE FIRST_NAME = ?
PREPARED_SQL_QUERY_STATEMENT_VALUES = Roy
#Prepared Insert
PREPARED_SQL_INSERT_STATEMENT = INSERT INTO TSHIRTS.CUSTOMER VALUES(?,?,?,?,?,?,?,?,?,?,?)
PREPARED_SQL_INSERT_STATEMENT_VALUES =130,John,Hiller,Miller,125 S St.,C6,Baltimore,MD,20100,4104444444,[email protected]
#Prepared Update
PREPARED_SQL_UPDATE_STATEMENT = UPDATE TSHIRTS.STATE SET STATE_NAME = 'California' WHERE CODE = ?
PREPARED_SQL_UPDATE_STATEMENT_VALUES =CA
#Data base schema name
SCHEMA_NAME =TSHIRTS

How to give Username and password when calling HTTP page?

I have this code when i run this I get credentials error. How to give credentials .The authentication is set to windows in the https page. Means pop up will appear to get the credentials
declare
req UTL_HTTP.REQ;
resp UTL_HTTP.RESP;
value varchar2(1024);
p_url varchar2(4000);
OPT varchar2(1000);
BEGIN
dbms_output.put_line('');
p_url:='http://www.xyz.com/';
dbms_output.put_line(p_url);
req := UTL_HTTP.begin_REQUEST(p_url);
utl_http.set_header(req, 'User-Agent', 'Mozilla/4.0');
resp := utl_http.get_response(req);
loop
utl_http.read_line(resp, value, true);
dbms_output.put_line(value);
end loop;
exception
when utl_http.end_of_body then
utl_http.end_response(resp);
END;
When i run this i get
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<title>401 - Unauthorized: Access is denied due to invalid credentials.</title>
<style type="text/css">

Basic authentication is set using the UTL_HTTP.Set_Authentication() call.
If you are using a proxy and need procy authentication, you can set the username and password for proxy access, as part of the proxy URL. E.g.
utl_http.set_proxy( 'http://proxyuser:[email protected]', null );NTLM (Windows NT LAN Manager) authentication is proprietary and not part of the HTTP specifications. If that is needed, try and use the username and password as part of the URL - or do some research on how to manually perform NTLM authentication.
If you are using HTTPS, you need an Oracle Wallet with that server's certificate (making it a trusted certificate), and then set/use the wallet using the UTL_HTTP.Set_Wallet() call. See sample code in {message:id=10820182}.

Remote DVR Hates Me - Continues To Reject Valid Username And Password

Hi all,
I mistakenly posted this message in the programming forum by mistake, so I'm moving it here now (sorry about that):
For the past few days, I've been unable to login to the Verizon remote DVR from both my iPhone and the web. It had been working fine for months, then all of a sudden, when I try to login, I get the dreaded 'login failed. please try again."
My Username and Password still work fine for Verizon Central, but for some reason the remote DVR login page won't recognize them. I tried re-registering my username and password, but that didn't work. I don't have any periods (or other weird characters) in my username. And as I mentioned, it had been working fine for months and months. Very frustrating.
I called tech support. They couldn't help (seemed baffled and ill equipped to solve this type of problem). The rep told me that Verizon was having some trouble with remote DVR (yet he had NO information about what the problem was or if there was a fix in the works). Is this true, Verizon? Is there an internal issue? He said he was going to connect me to someone who could tell me more. I said great. Then he connects me and I get a recording that says, "you've reached a non-working number in the Verizon system ..." NICE!
Is anyone else out here having trouble logging in to their remote DVR?
One thing I noticed, the login page looks different. There used to be 2 radio buttons: one for ".com" and one for ".net." I don't see those any more. I wonder if that's part of the problem.
I appreciate any help. Thanks everyone. And again, sorry for the double post.

Hi Guys,
Thanks for taking the time to reply.
TROYH72: Yes, I'm painfully aware that the "http://m.verizon.com/tv" url is for mobile devices. It used to work fine on my iphone, but it no longer does. It constantly rejects my username and password (which are both valid). FYI, that same url used to work from my computer as well.
PJL: Thanks for your suggestion. I tried deleting the cookies and clearing the browser cache. No luck. I really think this is a problem on Verizon's end for a couple of reasons:
1. The login page looks different to me now. As I mentioned, there used to be radio buttons for .com and .net. Those are gone.
2. I have the same problem logging on from my computer as I do from the iphone. Seems odd.
3. I can log in to "http://www36.verizon.com/fiostv/web/," and some other Verizon urls, but I can't access my DVR once I'm logged in. The only way I can access my DVR remotely is to log in through "verizon.com" and do it the roundabout way. But as I mentioned in a previous post, that's really cumbersome from a mobile device.
4. Maybe most importantly, the remote DVR used to work perfectly! And now it doesn't work at all on my iphone ("Login failed. Please try again.") And it's wonky from the web. And I haven't changed anything on my end.
Maybe it's a Mac thing. I'm running Macs as well as an iphone. I know that sometimes, Verizon and Macs don't play nicely together. I'm at a loss. And it doesn't look my Ticket is making any headway.

Verifying a username and password against SQLServer 2000 dbase via servlets

Hello everyone,
I sent a message earlier on. I'm really sorry if I sounded rude. Actually Im working on a school project an it involves a bank application. I have created a registration page that saves information in a database table already created on my computer. I have also created an HTML page in wihich registered users can log in. I am trying to verify the username and password against the database table tagged "Register Customer Information" but when I click on the login button, I get an SQL exception that says "invalid column count or syntax error". Please can anyone help me out? I would really be grateful. Thank you so much. The code for my servlet is this:
* LoginConfirmationServlet.java
* Created on January 24, 2007, 11:32 PM
package org.me.RegisterCustomerInformation;
import java.io.*;
import java.net.*;
import java.sql.*;
import javax.servlet.*;
import javax.servlet.http.*;
* @author HP COMPAQ
* @version
public class LoginConfirmationServlet extends HttpServlet {
/** Processes requests for both HTTP <code>GET</code> and <code>POST</code> methods.
* @param request servlet request
* @param response servlet response
public void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
response.setContentType("text/html;charset=UTF-8");
PrintWriter out = response.getWriter();
String use=request.getParameter("usernname");
String pas=request.getParameter("passwword");
if((use!=null)&&(pas!=null))
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con=DriverManager.getConnection("jdbc:odbc:MyDSN","sa","");
ps=con.prepareStatement("select UserName,Password from RegisterCustomerInformation where UserName= ? and Password=?");
rt=ps.executeQuery();
while (rt.next())
String u=rt.getString("UserName");
String p=rt.getString("Password");
if (use.equals(u)&&pas.equals(p))
out.println("Welcome:"+use);
else
out.println("Your login information is incorrect.");
out.println("Please check to ensure your username and password is entered correctly.");
out.println("Thank you!");
con.close();
catch(Exception ex)
out.println("Error:"+ ex.toString());
/*out.println("<html>");
out.println("<head>");
out.println("<title>Servlet LoginConfirmationServlet</title>");
out.println("</head>");
out.println("<body>");
out.println("<h1>Servlet LoginConfirmationServlet at " + request.getContextPath () + "</h1>");
out.println("</body>");
out.println("</html>");*/
out.close();
The html fields names are:"usernname" and "passwword" respectively. I'm making use of the POST method and the servlet name is LoginConfirmationServlet. Please I would really be grateful if any one can help me out. Ive not been able to run this for the past few days. Thanks.
}

You did not supply values to UserName and Password. You have created preparedStatement object with sql query with ? marks for UserName andPasssword. Assign the values what u got from the form using setProperty(int index) method of preparedStatement and try.

New Imac. I get rid off login password from security and account and restart. Now it asks for username and password and it's not acepting anything. Any ideas?

New Imac. I get rid off login password from security and accounts and restart. Now it asks for username and password and it's not acepting anything. Any ideas?

First, reset your password as follows.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select  ▹ Restart from the menu bar.
You should now be able to log in with the new password, but you won't be able to unlock the Keychain. If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it. You’ll need to reset your keychain in the preferences of the Keychain Access application.
If you're being prompted to authenticate when making changes to files inside your home folder, continue as follows.
Back up all data now.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
Step 1
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

Making username and password casesensitive in MsAccess

Similar Messages

Maybe you are looking for