IDOC Acknowledgement Error

Hi All,
I am getting "Receiver exists , No filters , No conversion , No version change" message in IDOC Status of ALEAUD. And IDOC has not been sent to XI System.
I have done the settign for Idoc acknowledgement.
What is the reason of this message.?

this is inbound message that i am getting..
<?xml version="1.0" encoding="UTF-8" ?>
- <ALEAUD01>
- <IDOC BEGIN="1">
- <EDI_DC40 SEGMENT="1">
<TABNAM>EDI_DC40</TABNAM>
<MANDT>900</MANDT>
<DOCNUM>0000000002416250</DOCNUM>
<DOCREL>620</DOCREL>
<STATUS>30</STATUS>
<DIRECT>1</DIRECT>
<OUTMOD>2</OUTMOD>
<IDOCTYP>ALEAUD01</IDOCTYP>
<MESTYP>ALEAUD</MESTYP>
<STDMES>ALEAUD</STDMES>
<SNDPOR>SAPEIT</SNDPOR>
<SNDPRT>LS</SNDPRT>
<SNDPRN>EITCLNT900</SNDPRN>
<RCVPOR>SAPXID</RCVPOR>
<RCVPRT>LS</RCVPRT>
<RCVPRN>XIDCLNT300</RCVPRN>
<CREDAT>20071105</CREDAT>
<CRETIM>190225</CRETIM>
<ARCKEY>A05D0C308BBB11DC8598001A4BA967D2 0000000000573053</ARCKEY>
<SERIAL>20071105171956</SERIAL>
</EDI_DC40>
- <E1ADHDR SEGMENT="1">
<MESTYP_LNG>Z_MLS_INBOUND_RECEIPT</MESTYP_LNG>
- <E1STATE SEGMENT="1">
<DOCNUM>0000000000573053</DOCNUM>
<STATUS>64</STATUS>
<STACOD>SAPB1999</STACOD>
<STATXT>& & & &</STATXT>
<STAPA1>Immediately processi</STAPA1>
<STAPA2>Unable to interpret</STAPA2>
<STAMQU>SAP</STAMQU>
<STAMID>B1</STAMID>
<STAMNO>999</STAMNO>
<STAPA1_LNG>Immediately processing not possible:</STAPA1_LNG>
<STAPA2_LNG>Unable to interpret EGOD3 as a number.</STAPA2_LNG> - <E1PRTOB SEGMENT="1">
<DOCNUM>0000000002416235</DOCNUM>
</E1PRTOB>
</E1STATE>
</E1ADHDR>
</IDOC>
</ALEAUD01>
In 'Ack' i am getting this message.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Ack xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Status>Error</SAP:Status>
<SAP:Category>transient</SAP:Category>
</SAP:Ack>

Similar Messages

Error by sending IDOC-acknowledgements

Hello,
we have the following scenario:
R/3 IDOC -> XI -> Mail-Adapter
We want to receive acknowledgements from the adapter.
But we get the error "Sender XI Party http://sap.com/xi/XI / XIParty / xyz couldn't be transformed to an IDoc Partner".
Does anyone know how to solve this problem?
Regards,
Thorsten

Hi,
Ok then,
Only the IDOC-acknowledgements couldn't be sent back to the R/3.
1.By any chance, did you check the
IDXNOALE table: and see if the port, the
client of the sender, and the message type id there.If yes then that table lists and block your acknowledgement.
2. Check this, "Use transaction SXMB_ADM ( Integration
Engine - Configuration) to obtain system
error acknowledgments from pipeline
services of the Integration Server and
maintain the specific configuration
parameter ACK_SYSTEM_FAILURE of the
RUNTIME category.Whenever a system error occurs within the Integration Server, a system error
acknowledgment is sent back to the sender.But this is for system error acknowledgements.
3. Did you refer the guide: "How To Handle Acknowledgments for IDoc"
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
OR
https://websmp106.sap-ag.de/nw-howtoguides
Then go to exchange Infrastructure.
Regards,
Anirban.

IDoc Acknowledgement Issue in SAP PI 7.3

We have configured IDoc to IDoc scenario between two ECC system using IDOC_AAE adapter. When we run the RBDSTATE program to trigger ALEAUD IDoc it is getting failed in SM58 in ECC system. But when we configure a separate scenario to transfer ALEAUD IDoc from one ECC to other ECC system usin IDOC_AAE adapter then the ALEAUD IDoc reached in target ECC system. In this case there is no error in SM58 of ECC system.
SM58 Error: Commit fault: ASJ.ejb.005043 (Failed in component: sap.com/com.sap.aii.ad
Regards,
Anurag

Hi Anurag, Hasan,
Check the following OSS Notes, they are both addressed to the error you mentioned (appearing under different circumstances, so you might have to choose the right one):
1719180 Handling of multiple acknowledgements in one ALEAUD IDoc
1729575 Sending IDoc acknowledgements fails because of long text
Regards,
Greg

How to get Idoc acknowledgment in File to Idoc scenario

Hi All,
Please give suggestions about the below mentioned scenario:
Scenario: FileXI- ECC - Data from File is converted to various IDocs and posted in SAP. (No BPM used)
Problem: Exception Handling > > We want a message back from SAP system telling us that out of 100 IDocs that were sent, n were posted successfully and rest failed along with the error description. How can this be achieved?
Regards,
XIer

Pls go thruough these links also
Please see the below links
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm
unable to import from SLD
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
/people/sravya.talanki2/blog/2005/10/27/idoc146s-not-reaching-xi133-not-posted-in-the-receiver-sap-systems133
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
idoc erros - http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
IDOC Acknowledgements
R/3 IDOC ->XI-> ORACLE Error Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements
Regards
Abhishek Agrahari

IDOC Acknowledgement and Header Mapping

Dear all,
I've got the following scenario:
SAP 4.6C is sending many different IDOCs to XI 3.0 (SP14).
On XI side there are several integration processes, business systems and business services receiving the IDOCs.
I want to create IDOC acknowledgements and send them back to SAP system.
For one integration process I was able to successfully create and send back an acknowledgement by following the steps described in the very good blog:
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
Now I want that every integration process/business system/business service is sending back an acknowledgement with the same logical system name (meaning "this acknowledgement is coming from XI").
As it is not possible to enter the same logical system name for more than one process I created a receiver agreement with:
Sender Service = the integration process
Receiver Service = the SAP 4.6C business system
Receiver Interface = ALEAUD.ALEAUD01
Receiver Communication Channel = IDOC receiver channel called "Ack_IDOC_Receiver", existing in SAP 4.6C business system and pointing to this system
Additionally I created a header mapping in this receiver agreement where I set the Sender Service to the business system of the XI system.
Unfortunately the tests showed to me that obviously the header mapping (maybe even the whole receiver agreement) is being ignored completely as no Acknowledgement IDOC will be created. Instead I get the error message "Unable to convert sender service to an ALE logical system".
I also played around a bit with the options "Apply Control Record Values from Payload" and "Pass Sender value from Payload" but this didn't make any difference.
Why is the header mapping not replacing the sender service in the acknowledgement message?
Best regards,
Tobias

Tobias,
we have the same Problem.
we´re sending with Receiving Partner "12345" and the IDoc in the target System is filled with the standard SAP Value maybe the one configured in the SDL.
We have configured our IDOC_REceiver with a mark on "Apply Control Record Value from payload".
If you have a look at the SAP Helpfile you will find out that some header fields are not be changeable and get the value from sap.
like IDOC-Number, Receiving Partner and maybe the sender service ???
Regards,
Gordon

IDoc Acknowledgements w/ XI 2.0

Hi All,
We are attempting to utilize the IDoc Acknowledgment functionality that is built into XI IDoc Adapter. The documentation mentions this functionality briefly and says that all you have to do is add the ALEAUD.ALEAUD01 IDoc to the endpoint that is equal to the sending business system. I've done this, but nothing seems to happen. Does anybody have any experience with this functionality? Are there any detailed examples or documentation? Any help is greatly appreciated!
Thank you,
Jeff Kocur

Hi All,
I have now resolved this problem and thought I should spend some time sharing this with you.
I decided to look at the code that was issuing the error which was calling a function module called SAI_LOGICAL_SYSTEM_GET to return the logical system for my business system. When I ran the function module in test mode it returned a blank logical system. The logical system is stores in table sailcrbsc. I re-ran the function module with the bypass buffer field set to 'X' - now when the function module is called it returns the correct logical system.
Anyone out there have any more info on this? How should I have re-built this table?
Regards
Ian

IDoc acknowledgement again :)

Hi Expers
i am realy strugling with IDOC acknowledgement!!
i am following the Howtodo doc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb..
According to this document
page no 3(scenario 2. Externel system -XI-SAP)
and page no 26...
we can route the Idoc Ack ALEAUD to the sender system as a XI request message.In the Integration Server,we have to call transaction SE38, and run program IDX_ALEREQUEST to process IDocs with message type ALEAUD as XI request message.
Enter Sender Port, Sender Client,
Partner Number, Partner Type, and
Partner Role..
but m unable to execute this scenario... nothing is showing in Moni
Can anyone put some light on tha???
Thanx
Biplab

Receiver adapters support system acknowledgments if they are requested by the server.
They are triggered if the message is processed successfully by the adapter.
The receiver adapters do not support any application acknowledgments.
http://help.sap.com/saphelp_nw04/helpdata/en/8f/d906d01f77fa40a4c84683c3f8326f/content.htm
Receiver adapters that run on the Adapter Engine support system acknowledgments if they are requested by the sender.
Acknowledgements are triggered when a message is successfully processed by the adapter or if an error occurs while it is being processed.
Receiver adapters do not support application acknowledgments. The RNIF and CIDX adapters are exceptions to this rule, since they also support scenario-dependent application acknowledgments.
Sender adapters of the Adapter Engine do not request any acknowledgments

Idoc Acknowledgement in File

Hi All,
I came through some threads in SDN regarding Idoc acknowledgement and followed handling Idoc acknowledgement document. I am able to get back acknowledgement(ALEAUD) in Xi.
I configured a scenario to receive this acknowledgement in File.
But i am not able get the acknowledgement in the File.
In SXMB_MONI ,in the pipeleine step Technical Routing of Response i am getting Acknowledgement Message Stopped.
How to rectify the above error..I need to get the acknowledgement back in File..?
Is it possible to do without BPM..?
Hoping for good solution..
Thank You
Regards
Prakash

Hi,
If you are lokinf for IDOC acknowledgements means check these
setting up Audit Response.
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
ALEAUD need at least following fields to be filled:
E1ADHDR/MESTYP: original message type
E1ADHDR/E1STATE/DOCNUM: original IDoc number
E1ADHDR/E1STATE/STATUS: 68 in case of error, 53 in case of success
E1ADHDR/E1STATE/STATXT: Short description for R/3 user what has happend
If you are using XI 3.0 SP12 then there is some bug See : 828277
Just have a look into this blog-/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
http://help.sap.com/saphelp_nw04/helpdata/en/42/c8f66bc7a56bb0e10000000a1553f6/frameset.htm
ALEAUD not coming to SAP from XI & u0093Acknowledgment not possible" in idx5
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
Or else if you are looking to receive the File Acknowledgements means have a look at this
/people/michal.krawczyk2/blog/2006/06/22/xi-playing-with-the-file-adapters-acknowledgments
Regards
Seshagiri

Handling Idoc acknowledgements

Hi All,
As per the document "How to handle acknowledgements for Idoc" I made all settings and i am able to get acknowledgement in XI.
In the document it was said it is possible to configure ALEAUDIT as request message by executing the report IDX_ALEREQUEST. After doing this i able to get the acknowledgement as separate message, but it get stopped in the inbound queue.
In SMQ2 it is showing error as "sysfail" and in the detail it is showing "exception triggered but was not caught"
As per the document I hope we can receive the acknowledgement in File.
But i am not able to get it in the file.
Kindly help to get the result.
Thank You
Regards
Prakash

Hi,
Try and see the follwoing steps
1) In the Integration Server, call transaction SE38
2) Run program IDX_ALEREQUEST to process IDocs with message type ALEAUD as XI request
message.
3) Now Enter Sender Port, Sender Client,Partner Number, Partner Type, and Partner Rol
4) In Integration Directory, configure the routing of interface
5) Call transaction SXMB_MONI to display the XI message.
Also,
Further in IDX5 as well you will find entry for IDoc ALEAUD.ALEAUD01
Please go through the link
1)Succesful IDOC acknowledgements from ECC
2)https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
3)https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
Regards,
sangeetha
Edited by: Sangeetha on Mar 26, 2008 9:29 AM
Edited by: Sangeetha on Mar 26, 2008 9:37 AM
Edited by: Sangeetha on Mar 26, 2008 9:52 AM

Give navigation to find ACKNOWLEDGEMENT ERROR in XI

give navigation to find ACKNOWLEDGEMENT ERROR in XI after resheduling the messages
send as early as possible.

Hi ,
are you able to send Idoc to XI sucessfully.
if you don't want ACK back from XI. go to transaction NOALE and mark the message type as ACK not req.
if you want the ACK back need to configure the ALE AUDIT IDoc back to R3 from XI.

Issues in IDoc Sender Scenario:IDoc with errors added

Hi all
Am working on an IDoc to JDBC scenario. In R/3 system, I have created distribution model, partner profile, RFC destination and port.The IDoc is generated and is sent to XI successfully. But in XI , there is no entry in SXI_MONITOR for this (unfortunately IDX5 is not available in the XI server! ;as of now). Instead an entry is made in WE05 and WE02 with stautus 56(IDoc with errors added). In the status record:
status 56 : External segment name E2KOMG003 cannot be interpreted
status 60 : Basic IDoc type COND_A03 could not be found.
And the segments displayed in data record are different from the segments in the data record of the IDoc generated at R/3. (say for E1KOMG at R/3, E2KOMG003 in XI).Earlier the flow was working fine and the DB table was updated successfully. And the entire stuff is believed to be 'unmodified' .
Would any one help in resolving the issue.
Thanks,
Chilanka

Hi,
>>>>I have created partenr profile in R/3.Need I create a partner profile in XI for R/3 system?
no you cannot create any partner profiles in XI
for more about IDOC configuration in XI check :
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi">Mastering IDoc Business Scenarios with SAP XI</a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Logical system for IDoc acknowledgment?

Hi,
HTTP --> XI --> IDOC (with acknowledgment) is my scenario
whether the inbound and outbound parameters should be configured in the same logical system or in a different one (in transaction we20)
Thanks,
RPN

For IDOC acknowledgement ,go thru this and do the settings :
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
This will help u :
Configuration Tips for a Business Service/Integration Process to send back ALE audit IDOC

IDOC Syntax Error E0072 with status 26 after upgrade to ECC6.0

Hi
We have upgraded SAP R/3 from 4.6C to ECC6.0. After upgrade, when we create PO and output EDI, we are seeing this IDOC syntax error E0072 for Mandatory Segment E1EDK01. In 4.6C it was working fine with no issues, only after upgrade this problem started. It says E1EDK01 is missing which is mandatory. We are using basic type ORDERS01 with no extensions. When we see WE30 it looks fine, WE20 settings looks fine.
Order of the segments got scrambled in upgraded version. First segment is E1EDP19001, this is supposed to be under E1EDP01 segment. There are two E1EDP19001 segments created but there were no sub segments to E1EDP01.
Any help in this regard is highly appreciated.
Thanks
Pandiri

User Exit activation and fixing the issue in user exit fixed this issue.

Suppress Idoc acknowledgement in SAP PI 7.3

Hi Experts,
I need to suppress ALEAUD Idoc acknowledgements in PI. My scenaros is Idoc (ORDRSP) to file pass through.
Aleady entries are maintained for ORDRSP idoc in IDXNOALE table.
in SE16, IDXNOALE--> Selected ORDRSP entry--> change mode --> I have deleted values for NEG and TYPE, when i trigger Idoc from ECC, first time i am not getting acknowledgements but once i trigger automatically NEG value is updating as "X", from next time i am getting acknowledgements.
I have executed IDX_NOALE report in SE38, If i select ORDRSP message type and click on DoNotRequestAcknowledgments, its asking do you want to overwrite for all? if i select yes, all entries are deleted.
Help me to suppress these ALEAUD acknowledgements in SAP PI 7.3.
Attached is the enries i have updated.
Thanks & Regards,
Mohan.

Hi Harish,
I have checked this thread, As i mentioned earlier
I have executed IDX_NOALE report in SE38, If i select ORDRSP message type and click on DoNotRequestAcknowledgments, its asking do you want to overwrite for all? if i select yes, all entries are deleted.
To suppress idoc acknowledgements, do we need to add entries in IDXNOALE table or do we need to delete existing entreis by using report IDX_NOALE?
If i change NEG and TYPE values as empty, first time its working however next time automatically NEG value is updating as "X" due to that i am getting acknowlegement agan in the second time.
I am confused.
Thanks & Regards,
Mohan.

Status 56 - IDOC with errors added

Hi everyone,
 I was configuring File to IDOC Scenario, in the receiving R/3 system, i am getting error as Status 56 - IDOC with errors added "EDI: Partner Profile not available".
 but i had already created Partner profile in WE20.
Regards,
Varun Reddy.K

Hi Varun,
 The below link will help u in solving u r problem
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
Just try follow the steps followed in above mentioned link
And also check u r RFC connection in TC "SM59".
Reward with ponits if helpful
Regards
Sai Ganesh

IDOC Acknowledgement Error

Similar Messages

Maybe you are looking for