Managed Metadata - Usage Reports

Hello Community !
I would like to know if there is an option to create SharePoint integrated reports (Out of the Box or 3rd party), to display what kind of managed Metadata had been used and how often.
The report should display:
All existing TermGroups
All existing TermSets
All existing Terms and Subterms (if any)
and their corresponding values to be able to see tendencies and trends about the different terms. This data is needed to analyse the usage of metadata in general and for further enhancements.
It would be more important to receive significant values than the ability to create nice graphics.
Does anybody know if there is a solution for this approach.
Thanks in advance
-Gabriel

Hi,
According to your post, my understanding is that you wanted to create Usage Reports to display what kind of managed Metadata had been used and how often.
We can get the Usage of Managed Metadata through the logs.
Here is a similar thread for your reference. It used SPAuditQuery to get term usage.
http://social.technet.microsoft.com/Forums/en-US/65663169-3eb1-4a3d-ae4b-81479a4ccf43/issues-regarding-term-usage-count-for-taxonomymanaged-metadata-service-in-sharepoint-2010
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Similar Messages

Managed Metadata in Report Builder

hi
Is it possible to use managed metadata as a parameter in report builder 3.0?
thanks

Hello,
The "Web layout " is something new in Reports 9.0.2 , and if you open RDF created with 6i, the web layout is empty .
Did you try to execute your reports using the icon "Run Paper Layout" ?
Do you see the output in this case ?
Regards

Skype Manager extracting usage report got error!!!

I'm having issues with this since last March 12, 2015. I tried checking it with any of our remote Offices in AU, CA and PH still getting the same error. Note that I tried it on Firefox, Chrome and IE also cleared cache and still doing the same.
Exact message is Oops! "The server doesn't seem to be responding. Check your internet connection and try again"

This version of Apex comes with database release 11.1.0.6.0
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS for Linux: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
Following information might also be helpful.
Product Build: 3.1.0.00.32
Schema Compatibility: 2007.09.06
NLS_CHARACTERSET: AL32UTF8
DAD CHARACTERSET: UTF-8
JOB_QUEUE_PROCESSES: 1000
Thanks,
Mingying

ITunes U. Public Site Manager Site Disk Usage Reports

Hi All,
Is there any way for me to know how many total subscribers we have in the on our Public Site? I see on the site disk usage reports the number of people who have subscribed that week, but I want the overall total.
Thanks for any help!
Yolanda for iBioSeminars
http://itunes.apple.com/us/itunes-u/ibioseminars/id444139478

Hello,
Our college just went through the migration so i am speaking from this experience which, hopefully, might help you.
1. Make sure your Apple User ID is the same as in your iTunes U Admin site primary admin's ID.
2. You need to enter your school's primary admin sign in URL in Safari. The URL for your institution should be something like this: https://deimos.apple.com/WebObjects/Core.woa/SignIn/cwu.edu
3. A new window will come up on top of iTunes requiring you to sign in using your Apple User ID and password. Enter them and click Sign In.
4. Now you should see on the upper right hand of the screen in your iTunes admin site, a new button you never saw before. I do not remember the exact name but it is something like Migrating to Public Site Manager. And it is in red color. When you click that button, it will walk you through the process step by step.
Hope this helps.
Wang

Usage report gone?

Hi team,
I can't find the "monitoring usage" report, that previously was easily accessible from at least a couple of pages, including the main application builder page, if I am not wrong.
Is it gone for good?
Bye,
Flavio

Flavio,
It's still there.
From the main HTML DB Page, under Workspace Administration, click on "Manage Workspace". Next, click on the "Monitor Activity" icon. You'll see a set of user activity reports.
Thanks,
- Scott -

SharePoint 2010 Slide Library Unable To Select Managed Metadata When Publishing.

Hello,
I'm running into some problems with Managed Metadata when uploading (publishing) slides in a SharePoint 2010 Slide Library. If I have Managed Metadata Site Columns that are set to be required in my slide library, and I publish my slide(s) into the
SharePoint 2010 Slide Library I'm not prompted to enter in my required Metadata before the slide is published. The slide will upload, but then I would need to edit the slide and then enter in the required Metadata.
If I create a new column with a type set to Choice for example, and set it to be required and I upload (publish) a slide I'm now prompted to enter in the required Metadata, but all the Managed Metadata choices are grayed out and I'm unable to select anything.
I'm able to select a Choice for the new column.
Is this a bug within SharePoint 2010 that does not allow me to enter in Required Managed Metadata Tags on uploading (publishing) slides?
Regular document libraries work just fine with required Managed Metadata.
Thanks for any assistance.
v/r
JShidell
v/r JShidell

Hi,
According to your post, my understanding is that the Managed Metadata not prompted to enter value in the required metadata.
I had tested with this issue, and I found the same issue.
We will help to submit the issue to proper pipeline for you.
Again, thank you for your report which will definitely make SharePoint a better products. There might be some time delay.
Appreciate your time and patience.
Thank you for your understanding and support.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Application Usage Report Blank - ARD 3.8

We are trying to run an Application Usage Report on one of our clients. We are using both 3.8 Admin and Client.
It will run the report but the output is simply blank.
Has anyone seen this before? Any advice. Tried it on several clients and same issue each time.

Hi all - I'm suffering from similar ARD/VNC/ScreenSharing problems, too - in this case however Yosemite to Yosemite!
Client computer:
     Laptop: MacBook Pro
     Yosemite 10.10.2
     ARD 3.8.3
Remote Computer:
     Desktop: MacMini
     Yosemite 10.10.3
     ARD 3.8.3
I cannot connect to my remote machine (to control or just view it), neither with ARD nor with VNC.
It does not work with Remote Management enabled nor Screen Sharing.
Attempting a connection reports - after a while - the error "Connection failed ... Please make sure that Screen Sharing ... is enabled" (but it is enabled!)
In the log on the client machine the following entry appears:
Screen Sharing: SSSessionView.m:1815:-[SSSessionView ssSession:connectDidFail:]: Communications error
In the log on the remote machine the following entry appears:
com.apple.xpc.launchd[1]: (com.apple.screensharing[692]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.screensharing.server
Note, however that other functions work:
- On my Laptop ARD reports that the remote computer is available and displays the user and the current application correctly
- A connection does seem to be established between the client and the remote machine, because I can send a "Message to the Administrator" from the remote machine back to the client machine, which is correctly displayed on the client machine.
Come on Apple - you seem to have forgotten your credo "It just works!"
I thought I would never say it, but thank god for TeamViewer!

Usage Report Filter

Hello Skype,
We are a language company considering purchasing Skype business/manager. Let me explain our intended use: we would have one central account from which we would be calling our clients, however not Skype-to-Skype but Skype-to-Phone, as a medium for providing our services. There are a few features under the usage reporting that would therefore be essential for our business, however it is unclear if they are available.
These include:
The ability to create filtered usage reports based on each phone contact. We need to be able to provide proof of call times and durations, but client specific.
The ability to see on the filtered usage reports that the call was made even if the client didn’t pick up and be able to show specifically that the client did not pick up.
Are these features available?
Thank you and best regards,
Stephanie

Hi, Stephanie,
I suggest you reach out to the Skype for Business people ...
Using Skype in your businessTransform the way your business works with cost effective and collaborative tools.Contact our solutions team
Best regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

SIP trunking monitoring and usage report

Hello all,
Recently the IP telephony system has migrated to SIP trunking from PRI.   SIP trunking is running on CUBE 2900 serials.
Could anyone advise the following?    much appreciate it.
. SIP trunking monitoring :
   If MIB needed,   any brief steps to configure it on monitored device and monitoring system?
. SIP trunking usage report :
   Any software/application could generate the usage report?   and show the cocurrent calls?
Thanks again,
master002

Thanks Nadeem for the reply, looks Variphy Insight is the option?
I have installed RTMT and was able to get the real time data instead of the usage report. I also have CUOM -- operation manager, I haven't customized it to monitor SIP trunking yet.
As my previous post mentioned, any one could share the idea or experience on SIP trunking monitoring and usage report?
Thanks again,

How to increase Disk usage reported in Resource Monitor

Hi,
I wonder how I can increase Disk usage reported in the Resource Monitor. When I use the 7200 Hard drive or SSD, the max usage is 1Gb/sec.
Thank you for your help.
HN

Hi,
As I understand, you want to increase the size of the root partition (where you installed Solaris) which resides in c1t0d0s0. I think it can be done using Concatenations from Solaris Volume Manager (SVM).
I have tried it in non root partition like /export/home and it is very easy.
metainit -f d0 2 1 c1t0d0s7 1 c2t0d0s7 //this will create volume d0 as a concatenation
growfs -M /export/home /dev/md/rdsk/d0 //this will grow the /export/home partition
Regards,
Rei

SQL Server 2008 R2 Disk Usage report showing incorrect data file

When I go to ANY database (System, AdventureWorks*, user) in Managemant Studio, I right-click on the db, select Reports, select Standard Reports, and select Disk Usage. The disk usage report shows the correct db on top, but always only shows AdventureWorks_Data.mdf
when I expand Disk Space Used by Data Files section. This happens to any db I try. When I look at Database Properties/Files for that database, the logical and physical file names are correct.
Since the correct files appear in Database Properties/Files, I'm hoping it's just a bug in the report. Same thing happens if I run a Disk Usage by Table report for ANY database, The tables for AdventureWorks always only appear,
Thanks, Mike

Thanks Tibor!
I looked at the Properties for my login under Security/Logins and it shows my default db to be master. Not sure if this is correct, but it sounds plausible. I'll see if I can report the problem.
The only issue I can think of that was out of the ordinary for the install of 2008 R2 EE was this:
I originally installed 2005 DE, since it wouldn't expire. After the install of 2005 DE, I decided to uninstall it and install 2008 R2 EE. In between the installs of 2005 DE and 2008 R2 EE, I installed/uninstalled stupid stuff like 2008
Express, 2008 Express with Advanced Services (?), and 2008 EE. After each uninstall I also did a system restore to be safe.
Now each time I open Management Studio, i get a pop-up stating that there are SQL Server 2005 registered servers on my sytem and asks me if I want to add them into Management Studio. I always say no.
The AdventureWorks db is from 2005 and was installed automatically with 2005. I installed the 2005, 2008, and 2008 R2 AdventureWorks databases to my R2 for class. I'm not sure now if the Disk Usage report is showing me AdventureWorks_Data.mdf
because of my install into 2008 R2 EE or my previous install of 2005 DE.
Hope this kind of makes sense...
-Mike

SSRS with SharePoint 2010 Managed Metadata or Lookup Values - Display

When creating an SSRS (SQL Server 2008 R2) report from SharePoint 2010 list/library data using BIDS:
A Lookup field or Managed Metadata field displays in the format "1;#value" rather then just the "value".
SharePoint columns that have Rich Text display HTML tags in the report field.
What is the best way around these issues?
Is a Regular Expression the best way to parse out the value? If so does anyone have an example? Is there a BIDS/Dataset adjustment in the query that displays a "more user friendly values" from either Lookup/Managed Metadata or HTML tags?

thanks for posting this fix, but it only works if there is a single Meta Data term used picked. But in the case of multiple Terms used (or Person columns) you will need something like this. Very ugly but it works. Strips out all the special characters and
numbers.
=REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(Fields!Reviewers.Value,"9", "", 1),"8", "", 1),"7", "", 1),"6", "", 1),"5", "", 1),"4", "", 1),"3", "", 1),"2", "", 1),"1", "", 1),"0", "", 1),";", "", 1),"#", " ", 1)
Basically I combined these statements into one nested statement
=REPLACE(Fields!Reviewers.Value,"#", "", 1)
=REPLACE(Fields!Reviewers.Value,";", "", 1)
=REPLACE(Fields!Reviewers.Value,"0", "", 1)
=REPLACE(Fields!Reviewers.Value,"1", "", 1)
=REPLACE(Fields!Reviewers.Value,"2", "", 1)
=REPLACE(Fields!Reviewers.Value,"3", "", 1)
=REPLACE(Fields!Reviewers.Value,"4", "", 1)
=REPLACE(Fields!Reviewers.Value,"5", "", 1)
=REPLACE(Fields!Reviewers.Value,"6", "", 1)
=REPLACE(Fields!Reviewers.Value,"7", "", 1)
=REPLACE(Fields!Reviewers.Value,"8", "", 1)
=REPLACE(Fields!Reviewers.Value,"9", "", 1)
Cheers, TMG

Benefits of using "Managed Metadata Navigation Filter"

Hello,
I was interested in understanding the potential benefits of the usage of Managed Metadata Navigation Filter inside a library or list.
Is there a direct benefit apart from taking advantage of the actual navigation space for filtering, in comparison to just filter this metadata normally through the columns inside a view?
Any contribute or thought is welcome!
Ioannis Glaros

Hi loannis,
Metadata navigation enables users to dynamically filter and find content in lists and libraries by using a navigation hierarchy tree control to apply different metadata-based filters to the view.
The Metadata Navigation and Filtering features make it easier to work with very large lists and libraries:
1.Configurable navigation hierarchies and Key Filters
2.Automatic index creation
3.Indexed queries and fallback queries
For more information, yo can have a look at the blog:
https://support.office.com/en-gb/article/Configure-metadata-navigation-for-a-list-or-library-a8ddfcd1-a486-4e0f-b1b1-f10ca79fa9bc
http://msdn.microsoft.com/en-us/library/office/ee559293(v=office.14).aspx
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

How to create BI Publsiher Usage Reports?

We have several developers/users using BI Publisher as a reporting tool. We would like to create usage report such that we can identify, How many times a particular report was requested? How many users request a particular report? How Long a report takes to render?...etc.... We are using File-Based Repository for our reports and Version 10.1.3.4 is our current version of BI Publisher.
Is it possible to create a usage reports? If so, How we can do that?
Thanks in advance.

Hi,
Please refer threads:
Multiple Finished Goods in a Single Production Order
Wastage Management in Production Process
Thanks & Regards,
Nagarajan

Switch usage reports to reflect public site on iTunes U?

Our school started with a private iTunes U channel, then we converted it and went public (Thunderbird School of Global Management). All my usage reports are coming to me with 0 views. I think it is still giving me stats from the private site, which is no longer being utilized. How do I switch this over to see stats from the public site only?

I'm tootling my own horn here, but if you like, you can just use Woolamaloo to tell you what the aggregate sizes are for "anything" in iTunes U. Woolamaloo already knows how to parse that ginormous XML file. Be sure to grab the latest copy on the Woolamaloo website.
If you select something in the main window, a little field at the bottom of the window says how much storage it consumes. You can also find out storage sizes by selecting something in the main window, then opening an inspector for that "thing" (there's a site inspector, division inspector, section inspector, course inspector ... etc., etc.). Each inspector shows all the info the XML returns -- even values that aren't yet fully realized in the request XSD (XML is grabbed "maximally" by Woolamaloo using the web service).

Managed Metadata - Usage Reports

Similar Messages

Maybe you are looking for