Management Server Global Settings Override Being Ignored

I have a SCOM 2012 Gateway server with a bunch of machines in an untrusted domain reporting back to it. 
These systems aren't too critical, so I wanted to adjust the number of missed heartbeats for them.  On the Gateway server in the Administration/Management Servers page, I've checked "Override global Management Server settings" and adjusted
the number of missed heartbeats to 10. 
The problem that I have is that in testing this setting appears to be ignored.  On one of the managed servers I can stop the Health Service and wait, like before, after ~4 minutes I get the Health Service Heartbeat failure alert.  Has anyone else
encountered this issue?

First, Check the override setting in MT_Microsoft$SystemCenter$ManagementServertable, make sure the setting has been updated in Database. If it does, please restart the health State service on Gateway server.
Another thing we need to check is the Heartbeat Interval, the default interval is 50 Secs.
Juke Chou
TechNet Community Support

Similar Messages

  • Cannot start managed server via WLST - 'Overriding the ListenPort ...'

    Hello everyone
    I've created a development domain that has two machine, each of them has two weblogic server instances. On machine-2, I've started NodeManager already.
    I started WLST tool, connect to AdminServer and invoke 'start' command to start managed server on machine-2:
    start('MS-02','Server','t3://dvc.danang.vn:7003')
    but I get fail message like that
    wls:/dnict_domain/serverConfig> start('MS-02','Server','t3://dvc.danang.vn:7003')
    Overriding the ListenPort or ListenAddress is not supported.
    WLST will use the ListenPort and ListenAddress that are configured on the ServerMBean
    Starting server MS-02 ....Permission denied (publickey,password).
    Traceback (innermost last):
      File "<console>", line 1, in ?
      File "<iostream>", line 1280, in start
      File "<iostream>", line 1744, in raiseWLSTException
    WLSTException: Error occured while performing start : Error starting the server : Error occured while performing start : Server with name MS-02 failed to be started 
    Use dumpStack() to view the full stacktrace
    wls:/dnict_domain/serverConfig> dumpStack()
    This Exception occurred at Sun Oct 09 18:46:16 ICT 2011.
    weblogic.management.scripting.ScriptException: Error occured while performing start : Server with name MS-02 failed to be started
         at weblogic.management.scripting.ExceptionHandler.handleException(ExceptionHandler.java:48)
         at weblogic.management.scripting.LifeCycleHandler.startServer(LifeCycleHandler.java:501)
         at weblogic.management.scripting.WLScriptContext.start(WLScriptContext.java:477)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.python.core.PyReflectedFunction.__call__(Unknown Source)
         at org.python.core.PyMethod.__call__(Unknown Source)
         at org.python.core.PyObject.__call__(Unknown Source)
         at org.python.core.PyObject.invoke(Unknown Source)
         at org.python.pycode._pyx21.start$80(<iostream>:1270)
         at org.python.pycode._pyx21.call_function(<iostream>)
         at org.python.core.PyTableCode.call(Unknown Source)
         at org.python.core.PyTableCode.call(Unknown Source)
         at org.python.core.PyTableCode.call(Unknown Source)
         at org.python.core.PyFunction.__call__(Unknown Source)
         at org.python.pycode._pyx28.f$0(<console>:1)
         at org.python.pycode._pyx28.call_function(<console>)
         at org.python.core.PyTableCode.call(Unknown Source)
         at org.python.core.PyCode.call(Unknown Source)
         at org.python.core.Py.runCode(Unknown Source)
         at org.python.core.Py.exec(Unknown Source)
         at org.python.util.PythonInterpreter.exec(Unknown Source)
         at org.python.util.InteractiveInterpreter.runcode(Unknown Source)
         at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
         at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
         at weblogic.management.scripting.WLST.main(WLST.java:180)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at weblogic.WLST.main(WLST.java:29)
    weblogic.management.scripting.ScriptException: Error occured while performing start : Server with name MS-02 failed to be startedI'm wondering about "Permission denied (publickey,password)" error. Can you show me how to fix this issue?
    Any suggestion is appreciated
    Regards
    Cuong Pham

    Try removing the 't3://dvc.danang.vn:7003' argument. If this information is configured in the managed server, its unnecessary.
    Also, is the NodeManager registered with the AdminServer? You can use the command "nmEnroll([domainDir], [nmHome])" while connected to the AdminServer to if its not.

  • Sync settings are being ignored

    I have Thunderbird set to sync only the last 3 months but it is ignoring that and syncing all messages for all dates, for the folders for each of my Gmail labels, although it is syncing the main Inbox for only 3 months.
    How do I get it to stop syncing all those label folders?

    Thanks.
    In case anyone at Mozilla reads this:
    It is staggeringly confusing to have these various folder functions that are completely connected at every level located in two completely different, mutually inaccessible locations in the settings. I am a 'power user' who has taught myself GIS and advanced statistics software (SAS) and can say the folder management is far more confusing than it needs to be.
    I've been casually looking around the settings for months trying to figure this out, assuming - incorrectly - that something so basic will be self-explanatory, i.e. under "Server" or "Synchronization" settings. I didn't make a focused effort because it was inconceivable it wouldn't be somewhere in there. People shouldn't have to dig around in forums and post questions about this.

  • Proxy settings frequently being ignored

    I've got a frustrating issue with proxies that I hope someone can shed some light on.
    I've got a relatively normal networking set up (statically assigned IP address via local LAN), and any web access must be via a proxy. I've got my proxies set under networking options, and using Safari I can browse the web, and Software Update works. I have only one Location defined.
    I also have a number of other pieces of software installed that access the web and supposedly use the proxies set under networking options. e.g. Version Tracker, Mac Fixit, and a couple of other lesser known pieces.
    Now here's the annoying part; a lot of the time these pieces seem to ignore the proxy settings and try to go direct (I know this because I can see the packets bouncing off my gateway/firewall). Other times they will honour the proxy and work as expected (this seems to be the exception rather than the rule however :/ ).
    For the life of me I can't figure out what the magic ingredient is when it all works as expected. When it doesn't work properly, I can go to the command line and "scutil --proxy" will show the proxy settings as they should be. But they seem to be either unavailable to the offending applications or the Location is screwed up or something.
    Does anyone have any idea on why on earth this might be happening? I'd love to get to the bottom of this and have my proxies work consistently...

    Well that prompted me to check again the most notable program I have that has this issue - Version Tracker.
    So doing a "Check" results in a connect via HTTPS to the VT servers after the disks have been scanned, which works as expected and I can see the entry in my proxy logs.
    CONNECT client.versiontracker.com:443 - DIRECT/66.179.48.104
    Then clicking on one of the items that is available to update, which is supposed to load info about the package in the pane below the results, hits my firewall as it tries to go direct via HTTP. So VT is successfully using HTTPS, but not HTTP.
    However, as stated originally, my HTTP proxy is definitely set and Safari, et al work when I try and test them. Now I know it's likely that VT itself has some issues in it's code, but I suspect there is something more than just a bug in VT going on here. I've noticed other apps not work as well (these failures are all HTTP). And sometimes VT works and returns the info screen (unless on some rare occasions VT decides to use HTTPS for these screens as well - however, I can't reproduce this; sometimes it works and sometimes it doesn't).
    So programmatically speaking, is there more than one way for an app to get proxy details? Does the system cache this result anywhere? Is it possible for something to interfere with this process or possibly corrupt any cache, etc? It certainly seems odd that an app can get back (and use) the HTTPS proxy details correctly but not the HTTP proxy details. :/

  • Node Manager unable to start managed Server. SSL Handshake problem

    I am getting the following Error:
    weblogic.nodemanager.NodeManagerException: [Could not execute command start for server wecarebeadev via the Node Manager - reason: [CommandInvoker: Failed to send command: 'online to server 'wecarebeadev' to NodeManager at host: 'localhost:5555' with exception Write Channel Closed, possible SSL handshaking or trust failure. Please ensure that the NodeManager is active on the target machine].]
    I have Weblogic Server 7.0 SP1 with Admin and Managed Server running on the same physical machine as Windows Services.
    SSL port has been setup properly for Managed Server. Host Name Verification Ignored is checked for MS.

    Hi Ajay,
    This happens when the SSL communication between the admin and the node
    manager fails. The SSL configuration of the admin server or the node
    manager is the problem.
    cheers,
    gaurav.
    On 30 Jun 2003 12:19:49 -0700, Ajay Kulkarni <[email protected]> wrote:
    I am getting the following Error:
    weblogic.nodemanager.NodeManagerException: [Could not execute command
    start for server wecarebeadev via the Node Manager - reason:
    [CommandInvoker: Failed to send command: 'online to server 'wecarebeadev'
    to NodeManager at host: 'localhost:5555' with exception Write Channel
    Closed, possible SSL handshaking or trust failure. Please ensure that the
    NodeManager is active on the target machine].]
    I have Weblogic Server 7.0 SP1 with Admin and Managed Server running on
    the same physical machine as Windows Services.
    SSL port has been setup properly for Managed Server. Host Name
    Verification Ignored is checked for MS.
    Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/

  • Passing memory settings from the Node Manager to the Managed Server

    All,
    I am trying to start a Managed server from the Node Manager. The configuration is as follows:
    I have a domain with two managed servers(M1, M2). I could start both of them using the shell scripts without any problems. Both of the servers has custom memory settings -Xms3072m -Xmx3072m -XX:PermSize=256m
    to facilitate deployment and effective operation of managed servers (the applications being deployed are kind of large).
    Now, I am trying to start the same two servers using Admin Console:
    In the admin console: I created a Unix Machine(U1) assigned the managed servers (M1, M2) to U1. I started the Node Manager on U1.
    When I try to start a Managed Server from console, the server is starting but the memory settings (-Xms3072m -Xmx3072m -XX:PermSize=256m ) are not passed to the managed server startup, so the application deployment is failing with out of Memory errors. I tried to assign same memory settings to Node manager assuming it will pass on that configuration to the node manager without any luck.
    Any help is appreciated.
    Thanks
    Raj

    Starting Managed Server from Node Manager

  • Profile Manager 3.1.2 home sync setting being ignored on client

    Hey,
    We currently have all of our Mac clients successfully home syncing with Server 2.2.2 and WGM but we would like to upgrade to the latest version and finally move over to Profile Manager.
    I am currently trying to test Server 3.1.2 on a closed network with a couple of test clients.
    Everything seems to be working as expected and all deployment settings are being correctly set on each client.
    However the one thing that refuses to work on the client is the Home Sync settings that have been deployed.
    I have Home Sync set to sync at logout and manually only.
    On the client i can clearly see that the variable "syncBackgroundSetAtLogout" is set to "sync" within the com.apple.homeSync.plist file. However when I logout on either client I get no sync happening at all.
    Manually syncing works fine but I need this logout sync setting to work as I do not wish to have to go to each client on our network and manually set the settings from the "mobile settings" pane in preferences.
    Has anyone else come across this with 3.1.2 and maybe overcome it?
    Thanks, Justin

    Figured it out. I think it's just my interpretation of the sync settings that was the problem. For some reason you have to manage settings that you don't want managed and specify not to manage them. (?!)

  • Global Monitoring Override Of Managed Availability Messages Failing

    Hello,
    I have a client that would like the managed availability probes disabled.  I followed
    this KB to do this, but the probe emails persist.  My global monitoring overrides are shown below.  The client has two CAS servers, one MBX server, and one Exchange 2010 server as of now.  All
    three show version 15 build 913.22, also shown below.  This is the version I used with the -ApplyVersion parameter in the Add-GlobalMonitoringOverride command.  
    What can I try to resolve this?
    Thank you!
    Toni

    Hi,
    The ApplyVersion number is a combination of the version and build. (For example, your Exchange Server version is 15.0, the build is 913.22, and the ApplyVersion number is 15.0.913.22.) Please remove all Global Override and re-create them to have a try.
    Add-GlobalMonitoringOverride -Identity "FrontendTransport\OnPremisesSmtpClientSubmission" -PropertyName Enabled -PropertyValue 0 -ApplyVersion "15.0.913.22" -ItemType Probe
    Add-GlobalMonitoringOverride -Identity "MailboxTransport\Mapi.Submit.Probe"
    -PropertyName Enabled -PropertyValue 0 -ApplyVersion "15.0.913.22" -ItemType Probe
    Add-GlobalMonitoringOverride -Identity "FrontendTransport\OnPremisesInboundProxy" -PropertyName Enabled -PropertyValue 0 -ApplyVersion "15.0.913.22" -ItemType Probe
    Then restart the Microsoft Exchange Diagnostics service and the Microsoft Exchange Health Manager service on all your Exchange Server 2013 servers: EXCH-CAS, EXCH-CAS2, EXCH-MBX.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Can't see the Global Settings Manager !

    Hi,
    I can't see the Global Settings Manager here: Adobe - Flash Player : Settings Manager - Website Storage Settings panel
    I have a message 'this content requires Flash'.
    My OS: Vista Business 32 bits
    Flash player installed : 14.0.0.145
    Browser: Firefox 31 (latest version)
    Let me know how can I fix this issue, please.
    Thanks in advance.

    Hi Pat,
    Sorry for the delay time.
    I found the culprit, a firefox add-ons that consider the Global Settings Manager as an adv.
    May I ask you here another issue that I have with Flash while viewing movies ?

  • Where to increase Java Heap settings for Admin and Managed Server.

    Hello Experts
    I am having issue with increasing the JVM memory arguments for the Admin and Managed Servers. I have tried in a couple of places to increase the memory arguments (Xms and Xmx to 1024m)but its not taking effect. When I start the Admin Server and Managed server , I do not see the increased Heap settings. Here is what I see -
    "Starting WLS with line : /oracle/app/bi/Oracle_BI1/jdk/java -server - Xms256m -Xmx512m -XX:MaxPermSize=512m"
    I have the following memory arguments in the setDomainEnv.sh located in <DOMAIN_HOME>/bin
    XMS_SUN_64BIT ="2048"
    export XMS_SUN_64BIT
    XMX_SUN_64BIT="2048"
    export XMX_SUN_64BIT
    Looks like this did not work , so I added an entry in the setOBIDomainEnv.sh file hoping to increase the Java memory , but that does not work either. Below is from setOBIDomainEnv.sh file -
    Really, trying to understand where/how the JVM settings are controlled from. Please guide me.
    Appreciate your time.
    Rakesh

    Under setobidomainenv.sh you will also find the admin server tag's so you need to increase the jvm parameters in there too. Depending upon your java vendor and bit version(Sun/Oracle/IBM/HP and 32-bit vs 64-bit ) So change accordingly
    eg:
    if server group is not obi then we can assume that it is Admin Server
      if [ "${JAVA_VENDOR}" = "Sun" ] ; then
      # -UseSSE42Intrinsics required for server running EM
      if [ "${JAVA_USE_64BIT}" = "true" ] ; then
      # Admin Server memory args for 64-bit Sun JVM
      SERVER_MEM_ARGS="-Xms256m -Xmx1024m -XX:MaxPermSize=512m -XX:-UseSSE42Intrinsics"
      export SERVER_MEM_ARGS
    similarly in setdomain.sh you will find the args as below:
    XMX_SUN_64BIT="512"
    export XMX_SUN_64BIT
    XMS_SUN_64BIT="256"
    export XMS_SUN_64BIT
    if [ "${JAVA_VENDOR}" = "Sun" ] ; then
      WLS_MEM_ARGS_64BIT="-Xms256m -Xmx512m"
      export WLS_MEM_ARGS_64BIT
      WLS_MEM_ARGS_32BIT="-Xms256m -Xmx512m"
      export WLS_MEM_ARGS_32BIT
    after setting them just execute them ./setdomain.sh and ./setobidomainenv.sh and then try to start the admin and managed servers and see the process running with the updated values.

  • Browser.download.manager.scanWhenDone being ignored

    Seems that the browser.download.manager.scanWhenDone is being ignored for jpgs, svg's, etc... Still sets them with the "file came from another computer...' blah blah and blocks them.

    one workaround - log in as an admin
    gpedit.msc
    User Configuration > Administrative Templates > Windows Components > Attachment Manager
    Enable: Do not preserve zone information in file attachments

  • Why can't I see the Global Settings Manager - only the Local Settings Manager

    I've had an issue with Facebook content for months following an upgrade several versions ago - can't see my own uploaded videos or certain other content although some you tube embedded stuff is starting to work since the last upgrade.
    I've tried deleting various bits such as
    %appdata%\Adobe
    %appdata%\Macromedia
    But no joy.
    I wanted to see if anything on the global settings manager might have something to do with it but I get a blank where the various manager function screens should appear.
    Any suggestions on how I can see MPG/MPEG/VID content, why my own uploaded stuff doesn't play and why I can't see the global settings manager bits and pieces.
    Thanks,
    Jon
    32bit Win 7 HP
    IE9/Firefox

    Hi Chris - yep - for the first time, using chrome, I could see the settings manager.
    Now is there anything there that might prevent my seeing my own uploaded videos on Fb - I can see some but not all youtube stuff but other embeds aren't working... original file format compatibility perhaps?
    J

  • Hi Guys. Why are we in South Africa being ignored by Apply global when it comes to on-line services?

    Hi Guys, Why are we in South Africa being ignored by Apple global in terms of service?

    ?...what
    Also you are not speaking to Apple.  We are regular Users here to help with problems with your apple products

  • Pagination scheme settings being ignored in Theme15. Light Blue

    We are currently using version 3.0.1.00.08 of Oracle Application Express.
    I am experimenting with using a different theme for our next set of Apex developments to make them look different from the ones we have created in the past and I have found that when using the Theme Light Blue (theme 15), when I have a report region and set the pagination scheme and display position it is ignoring my settings and still printing the pagination on the right hand side at the bottom of the region.
    I have tried various pagination settings whilst in theeme 15 and they all appear to be ignored when using this theme, If you switch to other themes eg blue tan then the pagination settings which I have set work.
    Can anyone explain why pagination scheme and pagination display positions are being ignored in the light blue theme?
    Regards
    Kay

    Hi Kay,
    For the pagination to appear at the top etc, the template used needs to support it (essentially including the #TOP_PAGINATION# substitution string).
    If you take a look at the report template in both of those themes you will see a difference in the Pagination Subtemplate section.
    Everything to do (or at least a huge majority) with how the report is displayed is down to the template, so if particular substitutions aren't included in the template then it won't matter what options you choose...they simply won't be included.
    Hope this helps,
    John.
    Blog: http://jes.blogs.shellprompt.net
    Work: http://www.apex-evangelists.com
    Author of Pro Application Express: http://tinyurl.com/3gu7cd
    REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

  • Server start arguments ignored when starting managed server

    Hi
    We have configured a bunch of arguments for the managed server through the Admin Console in the Server->Start Arguments
    However those arguments are not picked up when we are starting the managed server.
    We are using a shell script to start the managed server using the weblogic.Admin class functionality.
    If the arguments are set in the JAVA_OPTIONS of setDomainEnv.sh, then they are picked up when starting the managed server.
    The nodemanager is configured with startScriptEnabled=true and startscript set to startWeblogic.sh.
    This is the scenario in Weblogic 10.0.0.
    Can anybody please explain why the arguments are not picked up?
    We tried the same arguments in Weblogic 10.2 and the arguments are picked up even if they are not configured in setDomainEnv.sh
    Is the difference in behavior because of the difference in versions?
    Edited by: user1030647 on Aug 29, 2010 12:26 AM

    Thanks Jay for the immediate responses.
    The thing I am worried about is it seems the behavior in Weblogic 10.0.2 seems to be in consistent with the behavior in Weblogic 10.0.0.
    In Weblogic 10.0.2, even if the JAVA_OPTIONS in setDomainEnv.sh do not include the paramaters that are set in "Server Start->Arguments", when starting the managed servers, they are picked up as can be seen from the managed server log files.
    However, in Weblogic 10.0.0, it seems that these options are not picked up when they are configured in "Server Start->Arguments". Only when they are configured in setDomainEnv.sh are they picked up.
    Do you have any info which points to this discrepancy?

Maybe you are looking for