Manager cannot see Candidates for assessment in MSS E-Recruiting.

Hi All,
Hope everyone is ding good.
I have an issue in regards with Candidate Assessment by Manager. Please have a look into this.
I was able to create Requisition and External application from Recruiter dashboard.
I can also complete all the activities including Candidate Assessment by Manager with Questionnaire. Manager was able to complete the questionnaire and assessment successfully.
Finally i could be able to perform Data transfer activity and completed hiring using PA48 Transaction.
But now, I am not able to perform the Candidate assessment by manager as no candidates are appearing in MSS E-Recruiting --> Candidate assessment.
Here in MSS E-Recruiting I can see the requisitions released by Recruiter, but he cannot see Candidates for assessment.
Any help will be Highly appreciable.
Thank you in advance.
-Sekhar

Hi Sekhar,
Additionally, the recruiter needs to create a questionnaire activity in status planned for a candidate and assign it to the manager linked to the requisition in order to have it in the MSS screen.
Regards,
Luk

Similar Messages

Concurrent Manager cannot find information for your conc req in FND_USER

Dear All,
Our customer is facing this issue while submitting conc requests. The requests end up in a Error with the following message in the Diagnostics.
Concurrent Manager cannot find information for your concurrent request from FND_USER
Cause: Concurrent Manager found no rows while selecting information for your concurrent request from FND_USER .
Sometimes it does not happen. It happens only for HRMS users. We are not sure what is causing this issue.
Anyone has faced this already? Highly appreciate your suggestions / pointers towards solving this issue.
Thanks in advance!
Hem

Hem,
Not sure if this is relevant here, but you may try to submit the following concurrent programs and see if it helps.
- "Sync responsibility role data into the WF table."
- "Synchronize WF LOCAL tables"
- "Workflow Directory Services User/Role Validation"
If the above does not help, enable trace/debug on any of those concurrent programs, and submit it again, check the concurrent request log file contents then (you do not have to generate TKPROF file, so skip this step).
Note: 453527.1 - How To Trace a Concurrent Request And Generate TKPROF File
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=453527.1
Regards,
Hussein

Very new to this: Cannot see code for a package in SQL Developer

I know I'm doing something wrong but I certainly don't know what. I'm looking for the code to go along with a package. I can see the procedures the package calls and I can see a list of procedures but I cannot see the code for those procedures. I have tried using describe on the pop up and I just don't see anything but a window showing me the parameters the procedure will use. I want to see the code it will use.
Can someone walk me through this or point me in the right direction?
TIA

I can only assume you're on 2.1 or 2.1.1 since you don't even say. If you click on the tree showing the various objects after establishing your connection, when you get to packages and you click the package you want, you'll see the spec. Now click on the plus sign and there should be 'package name' body. If you click that body icon, you say you still can't see the code?
Evita
Edited by: Evita on Mar 30, 2010 2:59 PM

Cannot see columns for some of the public synonyms

Background Info
I am using the Oracle 8.1.6 JDBC driver and connecting to Oracle 8 database. My plan is to give the user the option to initially select the type of tables that they want to see i.e. USER tables, SYSTEM tables, VIEWS and SYNONYMS. Based on the user selection I first display all the tables (for that type) and for each table selected by a user display the relevant columns.
I am doing this by using the DatabaseMetaData.getTables () and then the DatabaseMetaData.getColumns () methods
Problem
When I use these methods for SYNONYMS I cannot see the columns for lot of the public synonyms. Some the SYNONYMS for which I cannot see the columns are
ALL_JOBS, COLS, CLU, CAT, TABS.
As part of the debugging process, I found a java file OracleDatabaseMetadata.java file (as part of 8.0.4 sample files). In this file I see that calls are being made against ALL_TAB_COLUMNS. For each of the synonym that I am seeing the problem, there are no columns in ALL_TAB_COLUMNS. But when I do a desc ALL_JOBS in SQLPLUS, I get the columns for ALL_JOBS. So now I am confused on what is happening in the 8.1.6 JDBC driver.
Has anyone else run into the same problem.
Thanks

There are some cases where Discoverer cannot determine with certainty that the Totals or subtotals you create will be correct. It flags those totals as Values that cannot be aggregated. Go to Options-> Sheet Format and you can set what string you would like to see placed in those cells that Discoverer determines cannot be aggregated correctly.
Assuming that the blank totals are non-aggregable by Discoverer, there are some things you can do to to alter either your business area or worksheet or calculation that will enable you to get the totals you want. As this analysis takes some time and iterations, it is usually best handled through Oracle Support. Also see the doc and RN references to the EnhancedAggregationStrategy in the Preferences.
Also, given the version you are using it seems that you have just started using 9.0.2. You should strongly consider upgrading to OracleAS 10g (9.0.4) or at least upgrade to the latest 9.0.2 patch -> 9.0.2.54.
Discoverer Product Management

Project Management Cannot see Financials Tab

I have created a new responsibility for requirement where user wants to only be able to have what is in Projects List, but I can not get the tabs to come through, I only need the Financials one, but I am not able to figure out which one.
Guidance much appreciated. I have a menu with 100 entries now and still have not accomplished, so appreciate any feedback.

Short answer (these work both for Unix and Windows command prompt):
To start OMS:
% oemctl start oms
To check whether a local OMS is up or down:
% oemctl ping oms
To check the status of a OMS:
% oemctl status oms
Detailed answer:
See "Oracle Enterprise Manager Configuration Guide
", Chapter 3, section "Controlling the Management Server After Configuration". Here is the direct link http://download-west.oracle.com/docs/cd/B10501_01/em.920/a96673/ch3.htm#1001659
Nikolai

CANNOT SEE TOTALS FOR SOME COLUMNS IN DISC 9I (9.0.2.39.01)

We have made new reports in Disc 9i, column totals wont appear on the report where expected, It just shows "SUM" and then blank, this is happening for all the new reports.Please help..
Thanks.
Glen

There are some cases where Discoverer cannot determine with certainty that the Totals or subtotals you create will be correct. It flags those totals as Values that cannot be aggregated. Go to Options-> Sheet Format and you can set what string you would like to see placed in those cells that Discoverer determines cannot be aggregated correctly.
Assuming that the blank totals are non-aggregable by Discoverer, there are some things you can do to to alter either your business area or worksheet or calculation that will enable you to get the totals you want. As this analysis takes some time and iterations, it is usually best handled through Oracle Support. Also see the doc and RN references to the EnhancedAggregationStrategy in the Preferences.
Also, given the version you are using it seems that you have just started using 9.0.2. You should strongly consider upgrading to OracleAS 10g (9.0.4) or at least upgrade to the latest 9.0.2 patch -> 9.0.2.54.
Discoverer Product Management

Cannot see Roles for my WebService

I am trying to automate the following steps i do through WLS Console :
a. In the Weblogic console's Home page, click on Deployments link form left, find "gateway-management-service"
b. Expand, "gateway-management-service" and click on "GatewayManagementService" ( this is a webservice module )
c. Click on Security tab then the Roles tab.
d. Click "New" in "Web Service Module Scoped Roles" section.
e. In the new windows, set the name as "Special WS Role Enforcement" and click OK.
f. click on the link "Special WS Role Enforcement".
g. In the new page, Click on "Add Conditions" and select "User" in the new page and click Next.
h. In the new page, enter "CSR.gatewaywsuser" in the "User Argument Name", then click "ADD"
i. Click on Finish.
j. Save.
i have test.py as:
connect('weblogic', 'welcome123', 'localhost:7001');
realm=cmo.getSecurityConfiguration().getDefaultRealm();
xacmlatz = realm.lookupAuthorizer('XACMLAuthorizer');
xacmlrm = realm.lookupRoleMapper('XACMLRoleMapper');
resourceId = 'type=<webservices>, application=gateway-management-service, contextPath=gwy_management_service, webService=GatewayOidManagerService'
xacmlatz.createPolicy(resourceId, "Rol(Special WS Role Enforcement )");
xacmlrm.createRole(resourceId, "Special WS Role Enforcement ", "Usr(CSR.obigatewaywsuser )")
I run this script like :
$MW_HOME/oracle_common/common/bin/wlst.sh test.py
My problem : after executing the above script, when i go to Console -> Deployments -> gateway-management-service -> GatewayManagementService -> Security Tab -> Roles subtab, i don't see the Role. If try to run the script again it will fail with an weblogic.management.utils.AlreadyExistsException: [Security:090320]Failed to create role
What am i doing wrong?
I have tried bouncing both my managed and Admin server after running the test.py to see if that helps, but no success.
Edited by: codrguy on May 9, 2013 10:27 AM
Edited by: codrguy on May 9, 2013 10:38 AM

Hi Roger,
It is https://itunes.apple.com/us/podcast/marketing-tips-for-translators/id810122938

Project manager cannot see the PROJECTS even it is a part of Project Team

Dear All.
Describing our official scenario regarding Project Server permission mode.
As in our project server we have business analyst person who initiate a project and he is also the project owner of that project. My query that how he can give this project in the project center of PROJECT MANAGER?
Though i have one category in which i have mark this check "The user is on the Project's Project Team" and i have also build team in the project and assigned project manager in that team. But my project manager unable to see that project.
The only way is that to assign task to project manager then he is able to see the project but this one is not recommend way in our organizaiton.
Please suggest how we can better manage the category and security permissions.
Moreover we cannot use the status manager because status manager is team lead in our organization.
Thanks
REGARDS DANISH DANIE

Hi Danish Danie,
As Dale said, you should definitively switch to Project Server permissions mode. This will give you the flexibility you need and much more ease to maintain and administrate.
Here is an interesting technet article to read: http://technet.microsoft.com/en-us/library/fp161361.aspx
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Second system User cannot see files for first system User

For reasons too complex to go into, I had to set up a second system User. (Okay, an Apple tech at the Apple Genius Bar did this, to fix corrupted Apple Mail)
I am both Users. Both are admins.
According to the documentation, User2 should be able to see files belonging to User1 (and vice versa, I presume), but this is not happening. It looks like I have to manually transfer files from User1 to User2. (Once I do this, I will abandon User1, so I don't have to keep them in sync.)
How to set up so User2 has access to User1's files (and vice versa)?

Once you enable sharing, you use the Finder window to go to the other user home folder/directory. For example, if you're logged in as user1 and you want to see the user2 tree, just tell Finder to open /Users/user2 (via the Go command). This assumes that all your user folders are located in /Users - if you have for example a separate disk for user folders then you would substitute that volume name - for example you have all your user home directories on /Volumes/Users, you would tell the Go command /Volumes/Users/user2
Also, just to make something clear - don't spread your files across the two user accounts - copy all the stuff from both into one of the user accounts and then when you have everything you need, you can get rid of the account that is no longer needed. The only problem you might run into is that you have files owned by an account that is different from where they are physically located. But if you copy things (don't move them - copy them) you should not run into this issue. But if you do run into this issue, it is easily resolved with a couple of Terminal commands usually. Do you know how to copy things with Finder as opposed to move them?
Does that help?

HT201250 I just had a new hard drive installed in my iMac. Migration manager cannot see my external Time Machine hard drive to restore the files and applications. The drive is operational in Finder

I cannot seem to migrate the full time machine backup from an external hard drive back to the new hard drive. Finder sees the drive and files. When I use Migration managers, it only sees the computer hard drive after I select the time machine option to restore the files.

Welcome to the Apple Support Communities
With what OS X version did you make the backup? If it was the same as the version you are using now, you don't have to use Migration Assistant to restore the backup. Instead, there's a safer and better method, but you will lose all the changes you have made since the last time you made the backup.
Just hold Command and R keys while your Mac is starting to start into OS X Recovery. Then, select the option to restore a Time Machine backup, and follow its steps. Also, you will be able to select the backup you want to restore

Cannot see FQDN for ESR Repository in CE 7.11

Hi,
I have CE 7.11 and when I open the page http://host.domain.com:port/rep, it opens fine, but when I try to launch the link for Enterprise Services Builder, it open the url http://host:port/rep/start/repository.jnlp but without the FQDN.
How can I ensure that this opens with FQDN?
Also, if I open this page manually with FQDN, then ESR application starts to load but then fails due to hostname issue.
Please help.
Thanks,
Shitij

Hi Shitij,
Can you please after updating IP and FQDN host in host file and run javaws and launch manually for http://<host-FQDN>:port/rep/start/repository.jnlp.
Hope it helps
Regards
Arun

Cannot see folders for Hotmail email accounts

Using Microsoft email accounts I am not able to see my folders when using the iPad email application. I can see all of my folders inbox sent deleted folders with Gmail account using the same application. What is the best way to set up Microsoft Hotmail using Gmail application

Did the new account wizard come up?

Cannot see invitation for calendar items

I wanted to share an event in my calendar and someone else showed me his iphone and there was an invitation part of the edit window and he shared or invited me to an event from his iphone so that the event was now on my calendar. I cannot do that from my iphone.

Tasks are not under calendar, it is a separate option / icon on Blackberry

Cannot see printer for Adobe X after installing

I've installed Adobe X but no pdf printer shows up
in the printers area, or under any program to select a printer to use
.I'm using WIndows 7. Anyone know how to get this Adobe working?

Reader does not allow you to create pdf files. You need to purchase Acrobat X.

Cannot see "New Entries" in transaction BD54

Hi all,
I am working on an IDOC to File scenario.I am doing the ALE settings. However when i try to create a Logical system using transaction BD54; it says " Display View 'logical Systems':Overview"
also i cannot see button for New Entries.
kindly suggest solution.
Neha

This may be problem with your roles and profiles given to your user.
You have only display authorization for this system, Contact to your basis team to give you the authorization for development / customization also.
Regards,
Sandeep Kaushik

Manager cannot see Candidates for assessment in MSS E-Recruiting.

Similar Messages

Maybe you are looking for