Manual vs WM system and Confirmation Requirement
Hello ,
I would like to clarify the following regarding confirmation requirement.
Am I right to say, in a WM scenario,
1. Confirmation can be activated or not activated with a flag. In a non-WM situation, where user also manually enter the picked quantity, confirmation requirement is Not applicable.
2. Confirmation Requirement is an Verification process to check how many is actually picked. If fully picked, user goes into DO screen and enters the picked quantity in the 'picking quantity' field and no change to the delivery quantity which is the order quantity. Then where confirmation requirement is activated, a user will confirm the TO via LT12 and this leads to the wm activity status set to C automatically.
3. If not fully picked, actual picked quantity is entered in picking quantity and delivery quantity is set to this same value. The picking status will still be shown as C, fully picked because the TO is saved. During confirmation, user enters the difference using the indicator and now PGI can happen as wm status is set to C for partially picked quantity. User will process the balance in separate steps. The Difference Indicator is based on comparing the Ordered Quantity with the Delivered (or Picked Qty?)
4. In a non-wm situation, wm activity status is disabled or not applicable. Only picking status is applicable. Once fully picked, this quantity is entered same as the delivery and order quantity, the picking status is set automatically to C. Now, the Goods Issue can be processed.
regards
Pascal
Edited by: Pascal Gabin on Feb 5, 2011 2:37 PM
bump * pls
Similar Messages
-
What model(s) of iPhone are comparable with Apple Watch? What iOS version(s)? What else will interface with Apple Watch, and how? What are the data plan requirements? None of this seems to be on the website. If it is, it's well-hidden.
Everything that is currently public knowledge about the Apple Watch is here:
http://www.apple.com/watch/
The Apple Watch will not need a data plan as it is not a cellular device. It uses your iPhone's cellular connection. -
Difference between Activation Dev and Customer Requirement dev system
Hi All
I am going to install Baseline Packages
on ECC 6 EHP 4.
i am having confusation that why we need activation development system and customer requirement development system in our sap landscape...
As per sap document its mention that we need four system landscape......
i am have gone through this note 1426866.
so please help me.........
Please someone help me it is critical issue .. i am waiting for your valueable reply.....
Edited by: amkum82 on Oct 11, 2010 1:47 PMHi
Baseline package includes BC sets with preconfigured scenarios as you might know. While customers requirements may be require certain additional configuration,customizing or enhancments . So in implementation scenario to track and maintain Baseline configuration intact for reference and future use ,the Baseline activation system is used.
While the client requirement system will be a development system for config and testing of all requirements arising out of project.
I hope this helps
Regards
Mandar -
Required History record document and user manual of ERP System.
Required History record document and user manual of ERP System. Please send if anybody have .
In your example you aren't really doing anything. If you just put in something like 1 + 1, AppleScript will execute that (and you will get a result), but unless you actually do something with the information nothing is going to happen.
Computers aren't like they are in the movies and are basically really stupid by themselves (and sometimes with help). When programming, you have to specify exactly what you are doing, what you are doing it with, how you want to do it, and handle other things such as the phases of the moon and various road traffic. The AppleScript Language Guide assumes a little bit of programming understanding (and even then some luck helps) - some other resources that might help get you started are the tutorials at macscripter.net.
In the mean time, a System Profiler script that puts a basic profile into the specified file name/location would look something like:
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
font-weight: normal;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #B5FF6C;
overflow: auto;"
title="this text can be pasted into the AppleScript Editor">
tell application "System Profiler"
if (get documents) is {} then make new document -- make sure there is a document
tell document 1 -- the front document
set detail level to basic -- can also use full or mini
save as text in (choose file name default name "Profile.txt")
end tell
end tell
</pre> -
Is this legit?
Apple Support Team <applsupporteam @icloud.com>
Confirm your email address
Dear Email Users,
As part of our security measures, we regularly screen activity in the E-mail system
and after noticing an issue on your account password, we are requesting confirmation
from you for the following reason:
Our system requires further password verification.
In accordance with E-mailUser Agreement, your account access will remain limited
until the issue has been resolved. Unfortunately, if access to your account remains
limited for an extended period of time, it may result in further limitations or
eventual account closure.
To verify your E-mail account, you must reply to this email
immediately and enter your following
information.
First Name:
Last Name:
Email Username :
Email Password :
Thank you for using webmail
Icloud. com support team
<Edited By Host>Apple requests that you forward these types of emails to them as follows (from http://support.apple.com/kb/HT4933):
If you receive a suspicious email, select the message text so that it is highlighted. Choose Forward as Attachmentfrom the Message menu (OS X Mail) or the Actions menu (Outlook). Send the email to [email protected] This provides Apple's legal department and law enforcement with useful information to help prevent future phishing emails. -
Since upgrading to Lion OS 10.7.1, the wifi connectivity keeps blocking up intermittently and we need to manually keep switching on and off the wifi utility to get the connection back. even locking the preferred wifi network in system preferences does not help. This never used to happen with Snow Leopard
This is a big thank you to Rys Sinnefeldt who posted this fix.
Rys has made this fix very easy to do and takes literally 2 mins. It involves replacing the Atheros Lion driver 4.0 and replacing it with the snow leopard driver. Don't worry, Rys has made this so simple to do even I could do it and so far I have had no more wifi drops.
follow this link
http://rys.pixeltards.com/2011/09/04/osx-lion-wifi.html
Thanks again to Rys. -
here was start up glitch on desktop, which changed the computers configuration, which requires activation on Adobe Photoshop CS, but am not able to get throug activation system and phone support has been disconnected. How should I activate my software.
You are entitled to the CS2 version that will work without activation, since the activation servers were taken offline. Read the instructions and follow them on this page.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 -
how do i get this confirmation required screen off of the itune page
Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.
-
I want to download whatsapp and I pressed on it in the appstore and now it's frozen on the confirmation page, I can't press cancel nor can I press confirm. My phone is brand new!What to do please?!
hold the sleep/wake button and the home button until the phone restarts. after that make sure your itunes account is setup and confirmed.
-
Stop Automatic creation and confirmation of Transafer Order for a doc type
Hello All,
There is a requirement that I need to stop Automatic creation and confirmation of Transafer Order for a particular document type.
The issue is that sometimes the cycle goes upto creation of Invoice automatically but sometimes this does not happen. More over the user wants that the transafer order needs to be confirmed manually.
Can u please provide the .steps involved for thie case.
Thanks
ChandrashekharDear Steve,
Thanks a lot for giving reply with what I need to do, but I am unable to see result.
I have down configuration like below even though system not processing Auto TO creation. Can you explain me if I have down any mistake below.
Click on Assign button,
Press on New entries
WhN = 900
Reference Movement Type = 101
Movement indicator = B
Movement type for Whse Mgmt = 101
TR create Transfer Requirement = X
Immed.TO Creation
Mail confirmation for background processing = 01.
GR date = 2 -
Using confirmation requirement
Hello Folks!
I just like to confirm something about confirmation requirement.
1. Confirmation Requirement according to SAP library is :
"Confirmation Requirement
If confirmation is required, the quantity of material transferred into or out of the warehouse is not available for use until the transfer order or item has been confirmed.
You set the confirmation requirement using the WM customizing application."
I am unclear for the following reasons:
1. SAP course manual says :
"If there is no confirmation requirement, the system automatically confirms the quantities when you create the transfer order".
Part 1 :
This sounds like when using confirmation requirement, there is NO Automatic Confirmation of TO. So, how is it confirmed? Manually via another tcode by the pioker? What is the purpose for not using Automatic confirmation?
When is Confirmation Requirement activated?
Part 2:
What is meant by "...the system automatically confirms the quantities when you create the transfer order".
When you create a TO, its not yet printed. So, does this statement imply that the TO is also printed and picking is already done ?
Part 3:
If not fully picked , will the system still automatically confirm the quantities as fully picked?
Is "confirm the quantities" = confirm that quantities have been fully picked or there is picking done either fully or partially?
Have a wonderful day...
Regards
JohnV_OBJ = SY-MANDT.
SELECT SINGLE RUECK RMZHL INTO (V_RUECK, V_RMZHL) FROM AFRU WHERE AUFNR EQ Order_No AND GRUND = 'WORK'.
CONCATENATE V_OBJ V_RUECK V_RMZHL INTO V_OBJ.
l_header-tdobject = 'AUFK'.
l_header-tdname = V_OBJ.
l_header-tdid = 'RMEL'.
l_header-tdspras = 'EN'.
if strlen( TEXT ) GT 40.
update AFRU set TXTSP ='E' WHERE AUFNR EQ Order_No.
endif.
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
CLIENT = SY-MANDT
HEADER = l_header
INSERT = 'X'
SAVEMODE_DIRECT = 'X'
TABLES
LINES = t_textlines.
CALL FUNCTION 'COMMIT_TEXT'
EXPORTING
name = V_OBJ
savemode_direct = 'X'.
CLEAR : V_RUECK, V_RMZHL, V_OBJ , L_HEADER.
Here, t_textlines is a long text( set of lines in th elong text) -
Automatic TO creation and confirmation for a Material document
Hi Dear All,
i am new to MM andWM.
I have to customization for auto transfer orders and confirmations for material documents what ever created with 101 movement type in Inventory Management. I have down configuration like below.
SPRO->Logistics Execution->Warehouse Management->Activities->Transfers-> Set Up Autom. TO Creation for TRs / Posting Change Notices
Double click on control data tab
Hear for my warehouse I given input like Auto TO = 1,
AddId = select check box.
And in Assign control tab for 101 movement type I have given input like below.
Automatic TO = 1.
TO item can be confirmed immed. = tick checkbox
Propose Confirmation = tick checkbox.
Foreground/Backgrnd = D.
After creating of Material document I am executing report RLAUTA10 in SE38.When I execute this report system showing message like TO processing finished: TR total: 17, TO created: 0, Errors: 17.
If I check header details of transfer requirements in LB03, i am not seeing Tick Mark in Auto TO Creation field.
Can any one tell me what the mistake i have down or if i need to do any further configuration. Please help me regarding this concern?
Thanks in Advance..Dear Steve,
Thanks a lot for giving reply with what I need to do, but I am unable to see result.
I have down configuration like below even though system not processing Auto TO creation. Can you explain me if I have down any mistake below.
Click on Assign button,
Press on New entries
WhN = 900
Reference Movement Type = 101
Movement indicator = B
Movement type for Whse Mgmt = 101
TR create Transfer Requirement = X
Immed.TO Creation
Mail confirmation for background processing = 01.
GR date = 2 -
Logical system and business system
Hi experts, please help me with the below questions---
1) What is the diff between logical system and business system?
2)what is the difference between logical system(defined in R/3) and business system (defined in SLD) in idoc to file scenario.
3) Is it require to give the logical system name of the xi server(Which we define in idx1 port) to the 3rd party system(Application system at the FTP side) to carry out file to idoc scerario?Hi,
Business System :
1. Business systems are logical systems, which function as senders or receivers within XI. Business systems can be SAP systems or third-party systems. Depending on the associated technical system.
2. Business Systems should be mandatory used when dealing with Idoc's and Proxies .
Business Service:
1. Business Service requires manual adding on Inbound and Outbound Interfaces, Business Systems do not.
2. Business Services are maintained across environments and so, their names cannot be changed. Business Systems names can be changed across environments by providing SLD level transport targets.
3.In the Business Services we cannot maintain the Group and Targets in SLD. For Ease in transporting your ID/Configuration objects Groups and Targets are used in SLD for Business Systems.
4.Business Service has no SLD Entries and No Assigned Products and SWCV's
Regards
Sangeetha -
Technical systems and Business systems in SAP XI
can any one tell me ,breifly explain the diff b/w <b>Technical Systems</b> & Business Systems?
steps to create Techincal system and Business systems?
and also Steps for creating Software Components? For Technical System we can create more than one Business systems ,what it means?can any one explain?Hi
First I let u know with analogy and actual definition as below
Any module of SAP like MM, SRM, FICO ets makes a logical system in combination according to business requirements is a business system which is actualy hosted on an application server like ABAP AS or Java AS which is basically a technical system.
Technical systems are application systems that are installed in system landscape (a CRM server, for example). Most systems (Web AS ABAP and Web AS Java systems) automatically report information to the SLD about the elements that they contain by using the SLD data supplier programs. You need to manually register the following types of system only:
Standalone Java systems
Third-party systems
Business systems are logical senders or receivers that exchange messages by using SAP XI and that are entered in the System Landscape Directory.
The business systems in the System Landscape Directory relate to a system landscape.
The business systems of business partners are not entered in the System Landscape Directory. To be able to address such business partners logically, use services in the Integration Directory. A business system is a way of specifying a service in the Integration Directory more precisely (business system service).
U can also refer Blog's
Re: Difference betweeen Technical systems and Business systems
For creation of software component see link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3172d290-0201-0010-2b80-c59c8292dcc9
<b>Reward point if it help u understand
</b>
Message was edited by:
Ajay Kumar -
Order qty and confirmed qty mismatch
Dear friends,
My requirement is System should not allow to go further if the sale order qty and confirmed qty(after avaialbility check) mismatch is there.Pls suggest.
Now currently system will check the availability qty and will show the information of confirmed qty in the another screen.and if we say continue the process, we can go ahead and save the document.but the document will be in open state.
So pls suggest the way i can go ahead for this requirement.
Regards
Mahendar.hi,
If u want to allow user to create SO as much as available qty..? means system sud create SO for order qty is equal to availble qty ...? if yes
then go the availbality check and find out availability check and checking rule..
and again go to OVZ9 remove the check box check with out RLT from rep.lead time tab
Resul is: If u enter in SO a10 qty ,and if you have only 5 qty in hand or in plant ,then system after checking the items it will change the order qty in SO(i e 5) automatically,
Caprin
Maybe you are looking for
-
Error occurred during control processing
Hi Team, I am developing a module pool program. Now I face an Information message "Error occurred during control processing" whenever I open the program in SE80. The object list is also distorted. The issue is with this program only and other Program
-
My tv shows or movies that I have purchased won't play at all. It says loading, then it comes up and says authorizing. Then it says "An error has occured loading this content." I just bought this apple tv and gone over and over pluging it in and set
-
G5 not seeing firewire hard drive on restart all of a sudden?
Recently I noticed my G5 not seeing my external 400GB fire drive after a restart or boot up. It has been connected since January and has not had this problem before. The only way it sees it is if I turn the drive off and on again, then it pops up on
-
This is kind of a weird issue. When I import Raw files to Aperture it seems that it re sizes the files tiny and I mean really tiny to to like 120 pixels out of no where. I checked out my camera first to see what my setting were but those were fine an
-
Positioning text in smartforms
Hi there. I've got a problem with smartforms. In smartforms I'm using such variables imported from driver program: &var1(60)& &var2(C)& &var3(60)& &var4(C)& &var5(60)& &var6(C)& but now .... when all variables except var5 are filled with