Manually starting Intelligent Agent Configuration Assistant and HTTP Listener
I have installed Oracle 9i on Solaris 8 and it stopped with an "Out of Memory" error during the Starter Database creation. I have fixed the memory problem and have now manually started the Database Configuration Assistant manually and managed to install a new database. Now I am trying to start the Intelligent Agent Configuration Assistant and the Apache HTTP Listener, but I cannot find out how to do this so that I can continue on with and complete the installation process from where I left off.
Do anyone know how to do this? I would appreciate any help that anyone can give.
Thanks
Anthony
Lets start with what product you are installing and why. An Oracle database installation, in and of itself, does not install an HTTP server.
Of course one might also wonder why you are, just now, installing software so old it is in desupport.
Similar Messages
-
How to start iSQL*Plus configuration Assistant on Command Line?
I have almost successfully installed oralce 10gR2 in opensolaris 5.11, In the final stage, Among the three Configuration Assistants:
the Net Configuration Assistant and Database Configuration Assistant have completed successfully, but OUI hang in the iSQL*Plus Configuration Assistant.
No response after a very long time.
Could anybody tell me how to manually start iSQL*Plus configuration Assistant on Command Line?
Thanks a lot !
Edited by: user11970554 on 2009-10-5 上午9:21Thanks.
Anyhow, I found an easier way to do this:
1)Just run installer again to start the OUI:
#./runInstaller
2)Choose "Custom" installation option
3)check the box at "iSQL*Plus" for reinstall
4)The OUI will first deinstall iSQL*Plus, and then reinstall it, and will automatically start "iSQL*Plus configuration Assistant".
This procedure applies to any component of oracle which failed at first time installation. -
How Do i start Intelligent Agent on Unix
how do i start Intelligent Agent on Unix and how do i make it start automatically when the server comes up
Thank uDepends on which version of Oracle your are running
Pre 9i -
Handled via the lsnrctl command
start - lsnrctl dbnsmp start
stop - lsnrctl dbsnmp stop
or lsnrctl ? for help
In addition pre 9i a data gatther process is needed to collect stats on host in 9i included with the agent
9i - Own facility
agentctl
agentctl start agent
agentclt stop agent
agentcl ? help
However you configure db and listenter to come and and down should work or see you sysadmin.
Steve -
Agent Configuration Assistant fails on installation
Trying to install 9iR2 on Red Hat Linux 7.3. I've got a test server working but the production one refuses to run the Agent Configuration Assistant. It just says
--<snip>--
Parameter "orahome" = /opt/oracle/product/9.2.0
Parameter /nodeinfo" = NO_VALUE
Agent Service Failed
--</snip>--
Is it vital for me to have it running? To what do I need it exactly?
Here's some details on issue, if someone could be able to help me out...
--<snip>--
Command which is being spawned is /opt/oracle/product/9.2.0/JRE/bin/jre -classpath
/opt/oracle/product/9.2.0/JRE/lib/rt.jar:/opt/oracle/product/9.2.0/jlib/srvm.jar:/opt/oracle/product/9.2.0/network/agent/agentca.jar
oracle.agent.AgentCA /orahome /opt/oracle/product/9.2.0 /nodeinfo
NO_VALUE
Configuration tool Agent Configuration Assistant was canceled
Result code for launching of configuration tool is -1
--</snip>--
I read some agent related documentation:
http://otn.oracle.com/docs/products/oracle9i/doc_library/release2/em.920/a96676/toc.htm
I checked if the agent was running on the test server and if not, would
it start:
--<snip>--
[root@delfoi log]# agentctl status
DBSNMP for Linux: Version 9.2.0.1.0 - Production on 01-AUG-2002 16:15:09
Copyright (c) 2002 Oracle Corporation. All rights reserved.
Could not contact agent. It may not be running.
[root@delfoi log]# agentctl start
DBSNMP for Linux: Version 9.2.0.1.0 - Production on 01-AUG-2002 16:15:18
Copyright (c) 2002 Oracle Corporation. All rights reserved.
Starting Oracle Intelligent Agent......
Agent started
--/snip>--
Tried the same on our production server:
--<snip>--
[root@chfiv103 root]# agentctl status
DBSNMP for Linux: Version 9.2.0.1.0 - Production on 01-AUG-2002 17:03:21
Copyright (c) 2002 Oracle Corporation. All rights reserved.
Could not contact agent. It may not be running.
[root@chfiv103 root]# agentctl start
DBSNMP for Linux: Version 9.2.0.1.0 - Production on 01-AUG-2002 17:03:29
Copyright (c) 2002 Oracle Corporation. All rights reserved.
Starting Oracle Intelligent Agent...\nAgent startup failed. Check
/opt/oracle/product/9.2.0/network/log/dbsnmp.nohup for details
--</snip>--
And the logs say:
--</snip>--
[root@chfiv103 root]# more
/opt/oracle/product/9.2.0/network/log/dbsnmp.nohup
------------------------ Thu Aug 1 17:03:29 EEST 2002
Certain conflicts were resolved during discovery
Please consult /opt/oracle/product/9.2.0/network/log/nmiconf.log for details
Failed while initializing SNMP
Error initializing subsystems
Agent exited at Thu Aug 1 17:03:30 EEST 2002 with return value 55
Could not start agent. Initialization failure
[root@chfiv103 root]# more
/opt/oracle/product/9.2.0/network/log/nmiconf.log
DBSNMP for Linux 2.4.18-5: release 9.2.0.0.0 - Production on 01-AUG-02
17:03:29
Discovering services on chfiv103 configured on host addresses {chfiv103
80.81.172.177}
Using oratab file /etc/oratab
Warning : Error while sourcing third party discovery file
emddiscover.tcl
: can't read "tabfile": no such variable
--</snip>--
Couldn't find any strangeness in the config files either:
/opt/oracle/product/9.2.0/network/admin/snmp_ro.ora
/opt/oracle/product/9.2.0/network/admin/snmp_rw.ora
/opt/oracle/product/9.2.0/network/admin/listener.ora
/opt/oracle/product/9.2.0/network/admin/tnsnames.ora
I'm a bit loss here...
Regards,
PeterYou can to verify if you have a problem with the firewall. Run the next comands
Execute CMD and run
telnet hostname XXXX ------------> where XXXX is the AGENT PORT . This port its configure in the emd.properties file. This file is in the AGENT_DIRECTORY\sysman\config\
If you dont execute a telnet to this port, you have a firewall problem
Regards -
Agent Configuration Assistant canceled
i want to install oracle 9iR2... at the end of installation after creating a database, i get the canceled Agent Configuration Assistant..
The other assistant is succeeded
- Oracle Net Configuration Assistant
- Oracle Database Configuration Assistant
- Starting HTTP Server
but the Agent Configuration Assistant canceled.
Details for Agent Configuration Assistant
Parameter "orahome" = /u01/app/oracle/product/9.2.0.1.0
Parameter "nodeinfo" = NO_VALUE
Agent Service Failed
What is Agent Configuration Assistant?? what should i do??Lets start with what product you are installing and why. An Oracle database installation, in and of itself, does not install an HTTP server.
Of course one might also wonder why you are, just now, installing software so old it is in desupport. -
Agent Configuration Assistant hangs
Hello All,
I am installing the OEM agent (10.2.0.1) on an AIX 5.3 server. After I run the root.sh, it starts to run the Agent Configuration Assistant. At this point it just hangs for hours.
I have installed other 10.2.0.1 agents on other AIX 5.3 servers with no issues and the it completes relatively quickly.
Any ideas as to how to resolve this installation/configuration hang?
Thanks,
ReidChecking installer requirements...
Checking operating system version: must be 5200 or 5300
Passed
Checking swap space: must be greater than 150 MB. Actual 10240 MB Passed
Checking Temp space: must be greater than 1300 MB. Actual 4324 MB Passed
All installer requirements met.
The commandline for unzip:
/mnt/ora10gr2GRID/install/unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.0.
0/1/DataFiles/\*.jar -d /tmp/OraInstall2006-11-02_08-27-11AM
The commandline for unzip:
/mnt/ora10gr2GRID/install/unzip -qqq ../stage/Components/oracle.swd.oui/10.2.0.1
.0/1/DataFiles/\*.jar -d /tmp/OraInstall2006-11-02_08-27-11AM
The commandline for unzip:
/mnt/ora10gr2GRID/install/unzip -qqq ../stage/Components/oracle.swd.oui.core/10.
2.0.1.0/1/DataFiles/\*.jar -d /tmp/OraInstall2006-11-02_08-27-11AM
The number of files bootstrapped for the jre is 228.
The number of files bootstrapped for the oui is 96.
Execvp of the child jre : the cmdline is /tmp/OraInstall2006-11-02_08-27-11AM/jr
e/1.4.2/bin/java, and the argv is
/tmp/OraInstall2006-11-02_08-27-11AM/jre/1.4.2/bin/java
-Doracle.installer.library_loc=/tmp/OraInstall2006-11-02_08-27-11AM/oui/lib/aix
-Doracle.installer.oui_loc=/tmp/OraInstall2006-11-02_08-27-11AM/oui
-Doracle.installer.bootstrap=TRUE
-Doracle.installer.startup_location=/mnt/ora10gr2GRID/install
-Doracle.installer.jre_loc=/tmp/OraInstall2006-11-02_08-27-11AM/jre/1.4.2
-Doracle.installer.nlsEnabled="TRUE"
-Doracle.installer.prereqConfigLoc=
-Doracle.installer.unixVersion=3
-Djava.net.preferIPv4Stack=true
-mx150m
-cp
/tmp/OraInstall2006-11-02_08-27-11AM:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jl
ib/OraInstaller.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/oneclick.jar:/
tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/xmlparserv2.jar:/tmp/OraInstall2006
-11-02_08-27-11AM/oui/jlib/srvm.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jli
b/share.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/OraInstallerNet.jar:/t
mp/OraInstall2006-11-02_08-27-11AM/oui/jlib/xml.jar:/tmp/OraInstall2006-11-02_08
-27-11AM/oui/jlib/orai18n-collation.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui
/jlib/orai18n-mapping.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/emCfg.ja
r:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/ojmisc.jar:/tmp/OraInstall2006-1
1-02_08-27-11AM/oui/jlib/InstImages.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui
/jlib/InstHelp.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/InstHelp_de.jar
:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/InstHelp_es.jar:/tmp/OraInstall20
06-11-02_08-27-11AM/oui/jlib/InstHelp_fr.jar:/tmp/OraInstall2006-11-02_08-27-11A
M/oui/jlib/InstHelp_it.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/InstHel
p_ja.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/InstHelp_ko.jar:/tmp/OraI
nstall2006-11-02_08-27-11AM/oui/jlib/InstHelp_pt_BR.jar:/tmp/OraInstall2006-11-0
2_08-27-11AM/oui/jlib/InstHelp_zh_CN.jar:/tmp/OraInstall2006-11-02_08-27-11AM/ou
i/jlib/InstHelp_zh_TW.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/oracle_i
ce.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/help4.jar:/tmp/OraInstall20
06-11-02_08-27-11AM/oui/jlib/help4-nls.jar:/tmp/OraInstall2006-11-02_08-27-11AM/
oui/jlib/ewt3.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/ewt3-swingaccess
.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/ewt3-nls.jar:/tmp/OraInstall2
006-11-02_08-27-11AM/oui/jlib/swingaccess.jar:/tmp/OraInstall2006-11-02_08-27-11
AM/oui/jlib/classes12.jar::/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/OraPrer
eq.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/jewt4.jar:/tmp/OraInstall20
06-11-02_08-27-11AM/oui/jlib/jewt4-nls.jar:/tmp/OraInstall2006-11-02_08-27-11AM/
ext/jlib/em_1click_help.jar:/tmp/OraInstall2006-11-02_08-27-11AM/ext/jlib/em_1cl
ick_help_de.jar:/tmp/OraInstall2006-11-02_08-27-11AM/ext/jlib/em_1click_help_es.
jar:/tmp/OraInstall2006-11-02_08-27-11AM/ext/jlib/em_1click_help_fr.jar:/tmp/Ora
Install2006-11-02_08-27-11AM/ext/jlib/em_1click_help_it.jar:/tmp/OraInstall2006-
11-02_08-27-11AM/ext/jlib/em_1click_help_ja.jar:/tmp/OraInstall2006-11-02_08-27-
11AM/ext/jlib/em_1click_help_ko.jar:/tmp/OraInstall2006-11-02_08-27-11AM/ext/jli
b/em_1click_help_pt_BR.jar:/tmp/OraInstall2006-11-02_08-27-11AM/ext/jlib/em_1cli
ck_help_zh_CN.jar:/tmp/OraInstall2006-11-02_08-27-11AM/ext/jlib/em_1click_help_z
h_TW.jar:/tmp/OraInstall2006-11-02_08-27-11AM/ext/jlib/cfmlogger_properties.jar
... -
Failure of "agent configuration assistant" during 10.2 install on Win2003
I am doing a full install of 10.2 EM Grid with new database on Windows 2003. The install is successful until the last step, the "agent configuration assistant"
The GUI points me to the ConfigToolsFailedCommands file but it has only this as the entry:
"oracle.sysman.emcp.agent.AgentPlugIn"
Any ideas?
From the oracle.sysman.top.agent file:
Agent is Not Running
SQL*Plus: Release 10.1.0.4.2 - Production on Fri Mar 23 11:55:06 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL*Plus: Release 10.1.0.4.2 - Production on Fri Mar 23 11:55:39 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL*Plus: Release 10.1.0.4.2 - Production on Fri Mar 23 11:56:11 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL*Plus: Release 10.1.0.4.2 - Production on Fri Mar 23 11:56:43 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
Website target creation script failed.
INFO: oracle.sysman.top.agent:Requested Operation C:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe C:\OracleHomes\agent10g\bin\chronos_config.pl has failed to perform with Status = 1
INFO: oracle.sysman.top.agent:6
INFO: oracle.sysman.top.agent:Internal PlugIn for {Micro Step state:step:1:configuration in CfmAggregateInstance: oracle.sysman.top.agent:10.2.0.2.0:common:family=CFM:oh=C:\OracleHomes\agent10g:label=0} failed with an unhandled exception:
java.lang.Exception: 6
at oracle.sysman.emcp.agent.AgentPlugIn.startProcessing(AgentPlugIn.java:248)
at oracle.sysman.emcp.agent.AgentPlugIn.invoke(AgentPlugIn.java:223)
at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:509)
at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:121)
at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform methodfrom the cfmlogger:
C:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:Executing Command: C:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe C:\OracleHomes\agent10g\sysman\admin\discover\oracle_apache.pl C:\OracleHomes\agent10g swxoragc.slns.com
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
log4j:ERROR No appenders could be found for category (emSDK.config).
log4j:ERROR Please initialize the log4j system properly.
java.lang.UnsatisfiedLinkError: no oraInstaller in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1517)
at java.lang.Runtime.loadLibrary0(Runtime.java:788)
at java.lang.System.loadLibrary(System.java:834)
at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.loadNativeLib(OiipwWin32NativeCalls.java:940)
at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.<clinit>(OiipwWin32NativeCalls.java:42)
at oracle.sysman.oii.oiip.oiipg.OiipgEnvironment.getEnv(OiipgEnvironment.java:208)
at oracle.sysman.oii.oiip.oiipg.OiipgPropertyLoader.initUnixPtrFileLoc(OiipgPropertyLoader.java:212)
at oracle.sysman.oii.oiip.oiipg.OiipgPropertyLoader.<clinit>(OiipgPropertyLoader.java:125)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.updateProperties(OiicStandardInventorySession.java:448)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:255)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:230)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:179)
at oracle.sysman.emSDK.conf.InventoryLoader.initInventorySession(InventoryLoader.java:296)
at oracle.sysman.emSDK.conf.InventoryLoader.getHomeLocations(InventoryLoader.java:328)
at oracle.sysman.emSDK.conf.InventoryLoader.getAllHomeLocations(InventoryLoader.java:189)
at oracle.sysman.emSDK.conf.InventoryLoader.main(InventoryLoader.java:454)
Exception in thread "main"
STDOUT=
<Targets>
</Targets>
INFO: oracle.sysman.top.agent:Adding C:\OracleHomes\agent10g\sysman\install\target.outapache file to C:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = C:\OracleHomes\agent10g\sysman\install\target.outapache to C:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:Executing Command: C:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe C:\OracleHomes\agent10g\sysman\admin\discover\csa_collector.pl swxoragc.slns.com C:\OracleHomes\oms10g
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
STDOUT=
<Targets>
<Target TYPE="oracle_csa_collector" NAME="swxoragc.slns.com_oms_csa_collector" DISPLAY_NAME="swxoragc.slns.com_oms_csa_collector">
<Property NAME="recvFileDir" VALUE="C:\OracleHomes\oms10g\oms_csa\results"/>
</Target>
</Targets>
INFO: oracle.sysman.top.agent:Adding C:\OracleHomes\agent10g\sysman\install\target.outcsa file to C:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = C:\OracleHomes\agent10g\sysman\install\target.outcsa to C:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:Doing Chronos Configurarion...
INFO: oracle.sysman.top.agent:Executing Command: C:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe C:\OracleHomes\agent10g\bin\chronos_config.pl
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 1
INFO: oracle.sysman.top.agent:STDERR=
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
The Oracleagent10gAgent service is not started.
More help is available by typing NET HELPMSG 3521.
The Oracleagent10gAgent service could not be started.
A service specific error occurred: 1.
More help is available by typing NET HELPMSG 3547.
STDOUT=
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
The Oracleagent10gAgent service is starting..................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
Configuring webserver, document root C:\OracleHomes\oms10g/Apache/Apache/htdocs
Javascript and gif files copied in to document root directory.
Configuring webcache C:\OracleHomes\oms10g
Checking if opmn is up ...
C:\OracleHomes\oms10g/opmn/bin/opmnctl status
Processes in Instance: EnterpriseManager0.swxoragc.slns.com
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
HTTP_Server | HTTP_Server | 1820 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
OC4J | home | 1152 | Alive
OC4J | OC4J_EMPROV | 2068 | Alive
OC4J | OC4J_EM | 1808 | Alive
WebCache | WebCache | 2504 | Alive
WebCache | WebCacheAdmin | 292 | Alive
Restarting webcache...
C:\OracleHomes\oms10g/opmn/bin/opmnctl stopproc process-type=WebCache
opmnctl: stopping opmn managed processes...
C:\OracleHomes\oms10g/opmn/bin/opmnctl startproc process-type=WebCache
opmnctl: starting opmn managed processes...
Adding collection for webcache target : EnterpriseManager0.swxoragc.slns.com_Web Cache
EnterpriseManager0.swxoragc.slns.com_Web Cache ::: EnterpriseManager0_swxoragc_slns_com_Web_Cache
Attempting to reload Agent.
C:\OracleHomes\agent10g/bin/emctl reload
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Agent is Not Running
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Agent is Not Running
SQL*Plus: Release 10.1.0.4.2 - Production on Fri Mar 23 11:55:06 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL*Plus: Release 10.1.0.4.2 - Production on Fri Mar 23 11:55:39 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL*Plus: Release 10.1.0.4.2 - Production on Fri Mar 23 11:56:11 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL*Plus: Release 10.1.0.4.2 - Production on Fri Mar 23 11:56:43 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
Website target creation script failed.
INFO: oracle.sysman.top.agent:Requested Operation C:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe C:\OracleHomes\agent10g\bin\chronos_config.pl has failed to perform with Status = 1
INFO: oracle.sysman.top.agent:6
INFO: oracle.sysman.top.agent:Internal PlugIn for {Micro Step state:step:1:configuration in CfmAggregateInstance: oracle.sysman.top.agent:10.2.0.2.0:common:family=CFM:oh=C:\OracleHomes\agent10g:label=0} failed with an unhandled exception:
java.lang.Exception: 6
at oracle.sysman.emcp.agent.AgentPlugIn.startProcessing(AgentPlugIn.java:248)
at oracle.sysman.emcp.agent.AgentPlugIn.invoke(AgentPlugIn.java:223)
at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:509)
at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:121)
at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
INFO: OuiConfigVariables:IAction.perform() was called on {Action state:OUICA in CfmAggregateInstance: OuiConfigVariables:1.0.0.0.0:common:family=CFM:oh=C:\OracleHomes\oms10g:label=0}
INFO: Framework waiting for Action to complete at 11:57:16.056
INFO: CfwProgressMonitor:actionProgress:About to perform Action=OUICA Status=is running with ActionStep=0 stepIndex=0 microStep=0
INFO: OuiConfigVariables:About to execute plug-in OUI_CA
INFO: OuiConfigVariables:The plug-in OUI_CA is running
INFO: OuiConfigVariables:Launching CmdExec
INFO: OuiConfigVariables:ExitCode=0
INFO: OuiConfigVariables:The plug-in OUI_CA executed as attached=true in separate process with exitcode=0
INFO: OuiConfigVariables:The plug-in OUI_CA has successfully been performed
INFO: done waiting for Action from 11:57:16.056
INFO: Cfm.save() was called
INFO: Cfm.save(): 21 aggregate instances saved -
Installing Agent Configruation Assistant and get Error ora-02084
Hello
I am installing oracle 9i using oracle universal installer. Everything was going fine until installer tried to configure Oracle Database Configuration and Agent Configuration Assistant. Both failed with error ora-02084 with following details:
Parameter "orahome" = C:\oracle\oracle92
Parameter "nodeinfo" = NO_VALUE
Agent Service Failed.
I looked up the errror message and found
ORA-02084: database name is missing a component
Cause: The complete database name was not provided.
Action: Specify the full database name.
But where do I specify the full db name, is it a folder that i have to rename?
your help will be appreciated.THANKS
JJhi,
I just got the same error. I fixed it by choosing CUSTOM install and removing any part of the SID and Repository name that started or finished with a period. On my case something like this was created by the Wizard: OEMREP.mynetworkname.ad.mypcname. I just left OEMREP. -
Linux silent install stops at Starting to execute configuration assistants
I am using putty to perform silent install of oracle db 10g on my remote server (redhat) through the command line:
./runInstaller -silent -responseFile /tmp/enterprise.rsp
it works fine till reaching > starting to execute configuration assistants, where i receive no further response or even any errors, it just hangs up saying this, here is a summary :
Installation in progress (Wed Oct 29 18:06:32 CST 2008)
............................................................... 11% Done.
............................................................... 23% Done.
............................................................... 35% Done.
............................................................... 47% Done.
........................................... 55% Done.
Install successful
Linking in progress (Wed Oct 29 18:08:54 CST 2008)
. 55% Done.
Link successful
Setup in progress (Wed Oct 29 18:10:07 CST 2008)
.................... 100% Done.
Setup successful
End of install phases.(Wed Oct 29 18:10:13 CST 2008)
Starting to execute configuration assistants
What should I do to overcome this and complete the installation successfully?Hub wrote:
Hi
you are welcome, unfortunately you didn't mark this thread as a question so no stars for me .
Nervermind, herewith the feedback on your questions :
<em>Should I make a dbca.rsp ? how would I pass it to my install command line?</em>
In silent mode, DBCA uses values that you specify in the response file or as command-line options to create a database. DBCA does not display any screens or information while it creates the database. It logs all messages (including information, errors, and warnings) in a log file.
From the command line, enter the following command to see all of the DBCA options that are available when you use the silent mode:
$ @ora_root:[bin]dbca.com -help
Read more in that document : http://download.oracle.com/docs/html/B13681_01/a_nonint.htm#CIHDHHBE
<em>I tried: ps -efd | grep -i run , alot of process appeared, how would I know if the installer is among them?</em>
try to grep with a much longer name i.e :
ps -efd | grep -i runinstaller
<em>What is fuser * in the log directory ? is this a file I should create or what?</em>
No fuser is a unix/linux command that enable you to identify processes using a file or file structure. The fuser utility displays the process IDs of the processes that are using the files specified as arguments.
So if the runinstaller still active you will see i.e.
fuser silentInstall2008-08-08_10-50-48AM.log
silentInstall2008-08-08_10-50-48AM.log: 14506o
14506 is your process ID
Hope this helps you!
Thanks Hub,
It seems the installation still stuck at >>> Starting to execute configuration assistants
Here is what I am getting using fuser * in the /log dir:
installActions2008-10-30_10-27-52AM.log: 32275
oraInstall2008-10-30_10-27-52AM.err: 32275
oraInstall2008-10-30_10-27-52AM.out: 32275
But when run : ps -efd | grep -i runinstaller - it just gives me something like repeating my command:
root 3035 31653 0 10:36 pts/2 00:00:00 grep -i runinstaller >> does this mean that runInstaller isn't there anymore, though the fuser * is showing that the log files are still being used?
I'm not using dbca.rsp since I didn't choose Advanced configuration of database in my enterprise.rsp, and it is saying that using dbca.rsp is only incase I choose advanced configuration which is number =2 .
So what parameters should I pass to the runInstaller, am i still missing something that is keeping the installation stuck without giving any responses or errors ?
Edited by: user9940821 on Oct 30, 2008 8:48 AM -
Agent Configuration Assistant fails on install of oracle 9.2.0.4 Database Enterprises Edition On Linux AS 4
Parameter "orahome" = /home/oracle/OraHome1
Parameter "nodeinfo" = NO_VALUE
Agent Service Failed
System Configuration 512RAM 40 GB HDD 3.0 GHz
/etc/hosts File Specification
127.0.0.1 rd.hp.com rd localhost.localdomain localhostYou can to verify if you have a problem with the firewall. Run the next comands
Execute CMD and run
telnet hostname XXXX ------------> where XXXX is the AGENT PORT . This port its configure in the emd.properties file. This file is in the AGENT_DIRECTORY\sysman\config\
If you dont execute a telnet to this port, you have a firewall problem
Regards -
I want to install Oracle 9 on a Fedora Core 1.
I follow the instruction on the website :
http://www.oracle-base.com/articles/9i/Oracle9iInstallationOnFedora1.php
Everything goes well, but at the end, I have an error with the "Agent Configuration Assistant" :
Parameter "nodeinfo" = NO_VALUE
Agent service failed
I don't find the problemhi,
try re-installing it but selecting 'Software Only' in Database Creation. i believe it's not connecting because you'd still have to install patch 3119415, after upgrading it to 9.2.0.4 if you used the 9.2.0.1 installers, for the agent to work properly. just make all of the corrective measures on the documentation then use dbca or emca to create your database afterwards.
it took me a week to get mine installed properly on Fedora Core 1 with Enterprise Manager. if you also want to try to understand why you're instructed to install all of these patches, this website helped me a lot as well:
http://www.puschitz.com/InstallingOracle9i.shtml
enjoy! -
Agent Configuration assistant failed while 9i installation
Hi I have been installing 9i on my system....everything was fine until I reached the Configuration Tools wizard.
Under this all the tools succeeded in installing except : Agent Configuration assistant, it failed and when I looked into the details it says:
Parameter "orahome" = C:\oracle\ora92
Parameter "nodeinfo" = NO_VALUE
Agent Service Failed
Can anyone help me I am stuck at this point..
Thank youUnfortunately there's a whole bunch of possible reasons, read this note on metalink:
Installing 9.2 Agent Fails with Agent Service Failed
Doc ID:231786.1
Werner -
Agent Configuration Assistant Failed during install
At the end of Oracle 9i installation, the Agent Configuration Assistant failed with
Parameter"orahome"=/opt/oracle/product/9.2.0
Parameter"nodeinfo"=NO_VALUE
I'm installing Oracle 9i on a Sun sparc ultra 10 with 1 gig of RAM running Solaris 9.
Any help is much appreciated,
LucasThanks for the prompt reply, Joel. I did follow the install instruction. My /etc/system consists of:
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=100
set shmsys:shminfo_shmseg=10
set semsys:seminfo_semmns=1024
set semsys:seminfo_semmni=100
set noexec_user_stack = 1
set noexec_user_stack_log = 1
set sys:coredumpsize = 0
My .profile consists of:
ORACLE_BASE=/opt/oracle; export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/9.2.0; export ORACLE_HOME
ORACLE_SID=solaris; export ORACLE_SID
ORACLE_TERM=xterm; export ORACLE_TERM
TNS_ADMIN=/export/home/oracle/config/9.2.0; export TNS_ADMIN
NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1; export NLS_LANG
ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data; export ORA_NLS33
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib:/usr/openwin/lib
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/dt/lib:/usr/ucblib:/usr/local/lib
export LD_LIBRARY_PATH
# Set up the search paths:
PATH=$PATH:/bin:/usr/bin:/usr/sbin:/opt/bin:/opt/local/bin::/opt/NSCPnav/bin:$ORACLE_HOME/bin:/usr/ccs/bin:/opt/local/GNU/bin:/usr/local/samba/bin:/usr/ucb:.
export PATH
# CLASSPATH must include the following JRE location(s):
CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib
CLASSPATH=$CLASSPATH:$ORACLE_HOME/network/jlib -
Help:I can't start intelligent agent
I've just installed Oracle9i on RH9.
but when i start intelligent agent with :./agentctl start,
an error occured:./agentctl: error while loading shared libraries: libvppdc.so: cannot open shared object file: No such file or directory.
But I found the libvppdc.so is in $ORACLE_HOME/lib!!!
Anyone encountered the same problem?
Please help!did you check all pre-requisites when you installed the Oracle Server ?
Joel P�rez -
Help:can't start intelligent agent
but when i start intelligent agent with :./agentctl start,
an error occured:./agentctl: error while loading shared libraries: libvppdc.so: cannot open shared object file: No such file or directory.
But I found the libvppdc.so is in $ORACLE_HOME/lib!!!
Anyone encountered the same problem?
Please help!did you check all pre-requisites when you installed the Oracle Server ?
Joel P�rez
Maybe you are looking for
-
I've installed a 9.0.1 database on the system (runing fine and is connectable from Windows client via SQL*NET). When installing Portal 3.0.9 (from 1.0.2.2 install-files) i am unable to connect to the local database 9i database (from the started confi
-
Hi Gurus, Send me a list of Tcodes in SAP. Thanks in Advance, Sakthi
-
Do I need a DeckLink or some card to project DV on the side of a 2-storey bldg? Or a DeckLink HD if HDV?
-
Preventing posting in leading ledger by closing period in non leading ledge
Is it possible? I have 24 periods in non leading ledger and want to prevent posting in the leading ledger if the posting period is closed in non leading ledger. Currently when I try to post thru FB50L, for closed period, if I mention the non leading
-
HT4972 Can you update an Ipod touch 3.1.2
Is it possible to update an ipod touch version 3.1.2? It does not have an update option under settings/general.