MANY smtp server listings in iphone email...

I have my email (IMAP) set up, and when I go to settings/mail.../account/smtp/ I see a list of about 8 smtp servers (all the same exact one/settings) listed under "Other SMTP Servers". All are set to 'off'.
Why are these there and how do I remove them?
Thanks

BAM 11g uses UMS (like other components in SOA 11g) to send email. Take a look at the following document
http://download.oracle.com/docs/cd/E15523_01/integration.1111/e10226/ns_config.htm#BABJFFAF

Similar Messages

SMTP Server issues on iPhone

I use an IMAP email account administered by my university and I have it set up on my iPhone 4. The incoming mail server works fine on both wifi and 3G but the smtp server only works on wifi. If I attempt to send a message while on 3G the phone attempts to send for about 5 minutes and then gives up. I called TELUS and they had me add their smtp server smtp.telus.net which works fine for sending emails on 3G but an error message pops up when I try to use it on wifi.
I currently have my university smtp server as the primary server and the TELUS server as secondary and this works ok except that when i try to send a message on 3G the phone tries the university server for at least 5 minutes before switching to the TELUS server. If I set the TELUS server as primary the phone gives me an error message right away if I try to send on wifi and won't even try the secondary server.
Does anyone know a way to make it so that the phone will send the message with the correct server without waiting 5 minutes to send each message?
Thanks

With one of my users this same issue was occurring.
No matter if he used ATT primary SMTP or our SMTP server as a primary/secondary, going from 3G to wifi and around the environments through out his day would always end up with either side going well and the other end not sending at all.
We used this work-around I saw posted in some other forum:
Disable the primary (whatever SMTP it is set to) SMTP selection.
Put both 3G SMTP and local SMTP as secondary servers and active.
For some reason if the primary fails to connect, the switch to secondary does not seem to occur or does not occur within the time-out period causing mail sending errors. With the primary SMTP setting disabled, both servers in the secondary list will be checked promptly with no issues.

SMTP Server set up for emailing

Can anyone advise which BO documents sets out the procedure for setting up the job server for emailing, etc? The Admin and deployment guides talk about it, but don't specify how it's done.
Thanks.

CMC > servers > job server > destinations
enable SMTP and configure the default options from there. Some information may be required from your email admin.
Then schedule a report (that uses that job server) and select email as a destination. You will have the ability to select a specific address or use the default (configured on the job server in the 1st step). The accounts used will have to have access to send to the email SMTP server.
Regards,
Tim

Outgoing SMTP server refuse to send email on 3G network

I am frequently using my Iphone5 to reply to my Hotmail. Recently, the phone (when I am on 3G) has started to refuse sending my emails. Message on screen says "Cannot send mail. The user name or passwrod for "SMPT:[email protected]@smtp.live.com" is incorrect". The problem is I have not changed my password without also changing the outgoing mailservers. I receive incoming emails all the time, also when on 3G (which makes it more weird when incoming mail server is fine, but not outgoing). Then, as soon as I get wifi, the emails are being sent as they should. But not as long as I am on 3G. My husband is experiencing exactly the same problem. Pls help... many thanks,

I don't think that [email protected]@smtp.live.com" is the correct name for the SMPT server. I would check that setting

SMTP Server not responding to emails sent to 1 address externally

I've set up a mail server on a 10.4.11 machine. Everything was working fine until I accidentally deleted my personal account via Workgroup manager, I figured since it was IMAP I could just recreate it and everything would work as it once did. It didn't, now when I send emails to that address, the smtp log shows nothing, but yet I do not receive a failure message back to the sender. However, the messages sent internally from other addresses in that server work properly. In summation, I can't use an external address to send emails to one of my accounts, the smtp log doesn't even show an attempt made to connect to the server.
Also, all the other addresses work fine.
Here's my postconf -n:
always_bcc =
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
debug_peer_level = 2
enable_server_options = yes
html_directory = no
inet_interfaces = all
local_recipient_maps =
luser_relay = postmaster
mail_owner = postfix
mailbox_size_limit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mydestination = $myhostname,localhost.$mydomain,localhost, [removed for security]
mydomain = [removed for security]
mydomain_fallback = localhost
myhostname = [removed for security]
mynetworks = 127.0.0.1/32,[removed for security]
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpd_tls_key_file =
unknown_local_recipient_reject_code = 550
here's my postconf:
2bounce_notice_recipient = postmaster
access_map_reject_code = 554
address_verify_default_transport = $default_transport
address_verify_local_transport = $local_transport
address_verify_map =
address_verify_negative_cache = yes
address_verify_negative_expire_time = 3d
address_verify_negative_refresh_time = 3h
address_verify_poll_count = 3
address_verify_poll_delay = 3s
address_verify_positive_expire_time = 31d
address_verify_positive_refresh_time = 7d
address_verify_relay_transport = $relay_transport
address_verify_relayhost = $relayhost
address_verify_sender = postmaster
address_verify_service_name = verify
address_verify_transport_maps = $transport_maps
address_verify_virtual_transport = $virtual_transport
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
allow_mail_to_commands = alias, forward
allow_mail_to_files = alias, forward
allow_min_user = no
allow_percent_hack = yes
allow_untrusted_routing = no
alternate_config_directories =
always_bcc =
append_at_myorigin = yes
append_dot_mydomain = yes
application_event_drain_time = 100s
backwards_bounce_logfile_compatibility = yes
berkeley_db_create_buffer_size = 16777216
berkeley_db_read_buffer_size = 131072
best_mx_transport =
biff = yes
body_checks =
body_checks_size_limit = 51200
bounce_notice_recipient = postmaster
bounce_queue_lifetime = 5d
bounce_service_name = bounce
bounce_size_limit = 50000
broken_sasl_auth_clients = no
canonical_maps =
cleanup_service_name = cleanup
command_directory = /usr/sbin
command_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
command_time_limit = 1000s
config_directory = /etc/postfix
content_filter =
daemon_directory = /usr/libexec/postfix
daemon_timeout = 18000s
debug_peer_level = 2
debug_peer_list =
default_database_type = hash
default_delivery_slot_cost = 5
default_delivery_slot_discount = 50
default_delivery_slot_loan = 3
default_destination_concurrency_limit = 20
default_destination_recipient_limit = 50
default_extra_recipient_limit = 1000
default_minimum_delivery_slots = 3
default_privs = nobody
default_process_limit = 100
default_rbl_reply = $rbl_code Service unavailable; $rbl_class [$rbl_what] blocked using $rbl_domain${rbl_reason?; $rbl_reason}
default_recipient_limit = 10000
default_transport = smtp
default_verp_delimiters = +=
defer_code = 450
defer_service_name = defer
defer_transports =
delay_notice_recipient = postmaster
delay_warning_time = 0h
deliver_lock_attempts = 20
deliver_lock_delay = 1s
disable_dns_lookups = no
disable_mime_input_processing = no
disable_mime_output_conversion = no
disable_verp_bounces = no
disable_vrfy_command = no
dont_remove = 0
double_bounce_sender = double-bounce
duplicate_filter_limit = 1000
empty_address_recipient = MAILER-DAEMON
enable_errors_to = no
enable_original_recipient = yes
enable_server_options = yes
error_notice_recipient = postmaster
error_service_name = error
expand_owner_alias = no
export_environment = TZ MAIL_CONFIG
fallback_relay =
fallback_transport =
fast_flush_domains = $relay_domains
fast_flush_purge_time = 7d
fast_flush_refresh_time = 12h
fault_injection_code = 0
flush_service_name = flush
fork_attempts = 5
fork_delay = 1s
forward_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
forward_path = $home/.forward${recipient_delimiter}${extension}, $home/.forward
hash_queue_depth = 1
hash_queue_names = incoming, active, deferred, bounce, defer, flush, hold, trace
header_address_token_limit = 10240
header_checks =
header_size_limit = 102400
helpful_warnings = yes
home_mailbox =
hopcount_limit = 50
html_directory = no
ignore_mx_lookup_error = no
import_environment = MAIL_CONFIG MAIL_DEBUG MAIL_LOGTAG TZ XAUTHORITY DISPLAY
in_flow_delay = 1s
inet_interfaces = all
initial_destination_concurrency = 5
invalid_hostname_reject_code = 501
ipc_idle = 100s
ipc_timeout = 3600s
ipc_ttl = 1000s
line_length_limit = 2048
lmtp_cache_connection = yes
lmtp_connect_timeout = 0s
lmtp_data_done_timeout = 600s
lmtp_data_init_timeout = 120s
lmtp_data_xfer_timeout = 180s
lmtp_destination_concurrency_limit = $default_destination_concurrency_limit
lmtp_destination_recipient_limit = $default_destination_recipient_limit
lmtp_lhlo_timeout = 300s
lmtp_mail_timeout = 300s
lmtp_quit_timeout = 300s
lmtp_rcpt_timeout = 300s
lmtp_rset_timeout = 120s
lmtp_sasl_auth_enable = no
lmtp_sasl_password_maps =
lmtp_sasl_security_options = noplaintext, noanonymous
lmtp_send_xforward_command = no
lmtp_skip_quit_response = no
lmtp_tcp_port = 24
lmtp_xforward_timeout = 300s
local_command_shell =
local_destination_concurrency_limit = 2
local_destination_recipient_limit = 1
local_recipient_maps =
local_transport = local:$myhostname
luser_relay = postmaster
mail_name = Postfix
mail_owner = postfix
mail_release_date = 20040915
mail_spool_directory = /var/mail
mail_version = 2.1.5
mailbox_command =
mailbox_command_maps =
mailbox_delivery_lock = flock
mailbox_size_limit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
maps_rbl_reject_code = 554
masquerade_classes = envelope_sender, header_sender, header_recipient
masquerade_domains =
masquerade_exceptions =
max_idle = 100s
max_use = 100
maximal_backoff_time = 4000s
maximal_queue_lifetime = 5d
message_size_limit = 10240000
mime_boundary_length_limit = 2048
mime_header_checks = $header_checks
mime_nesting_limit = 100
minimal_backoff_time = 1000s
multi_recipient_bounce_reject_code = 550
mydestination = $myhostname,localhost.$mydomain,localhost,aetkinz.com,sellwiz.biz,riflematch.co m
mydomain = aetkinz.com
mydomain_fallback = localhost
myhostname = mail.aetkinz.com
mynetworks = 127.0.0.1/32,10.0.11.0/24,192.168.34.0/24
mynetworks_style = host
myorigin = $myhostname
nested_header_checks = $header_checks
newaliases_path = /usr/bin/newaliases
non_fqdn_reject_code = 504
notify_classes = resource, software
owner_request_special = yes
parent_domain_matches_subdomains = debug_peer_list,fast_flush_domains,mynetworks,permit_mx_backup_networks,qmqpd_a uthorized_clients,relay_domains,smtpd_access_maps
permit_mx_backup_networks =
pickup_service_name = pickup
prepend_delivered_header = command, file, forward
process_id_directory = pid
propagate_unmatched_extensions = canonical, virtual
proxy_interfaces =
proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks
qmgr_clog_warn_time = 300s
qmgr_fudge_factor = 100
qmgr_message_active_limit = 20000
qmgr_message_recipient_limit = 20000
qmgr_message_recipient_minimum = 10
qmqpd_authorized_clients =
qmqpd_error_delay = 1s
qmqpd_timeout = 300s
queue_directory = /private/var/spool/postfix
queue_file_attribute_count_limit = 100
queue_minfree = 0
queue_run_delay = 1000s
queue_service_name = qmgr
rbl_reply_maps =
readme_directory = /usr/share/doc/postfix
receive_override_options =
recipient_bcc_maps =
recipient_canonical_maps =
recipient_delimiter =
reject_code = 554
relay_clientcerts =
relay_destination_concurrency_limit = $default_destination_concurrency_limit
relay_destination_recipient_limit = $default_destination_recipient_limit
relay_domains = $mydestination
relay_domains_reject_code = 554
relay_recipient_maps =
relay_transport = relay
relayhost =
relocated_maps =
require_home_directory = no
resolve_dequoted_address = yes
resolve_null_domain = no
rewrite_service_name = rewrite
sample_directory = /usr/share/doc/postfix/examples
sender_based_routing = no
sender_bcc_maps =
sender_canonical_maps =
sendmail_path = /usr/sbin/sendmail
service_throttle_time = 60s
setgid_group = postdrop
show_user_unknown_table_name = yes
showq_service_name = showq
smtp_always_send_ehlo = yes
smtp_bind_address =
smtp_connect_timeout = 30s
smtp_data_done_timeout = 600s
smtp_data_init_timeout = 120s
smtp_data_xfer_timeout = 180s
smtp_defer_if_no_mx_address_found = no
smtp_destination_concurrency_limit = $default_destination_concurrency_limit
smtp_destination_recipient_limit = $default_destination_recipient_limit
smtp_enforce_tls = no
smtp_helo_name = $myhostname
smtp_helo_timeout = 300s
smtp_host_lookup = dns
smtp_line_length_limit = 990
smtp_mail_timeout = 300s
smtp_mx_address_limit = 0
smtp_mx_session_limit = 2
smtp_never_send_ehlo = no
smtp_pix_workaround_delay_time = 10s
smtp_pix_workaround_threshold_time = 500s
smtp_quit_timeout = 300s
smtp_quote_rfc821_envelope = yes
smtp_randomize_addresses = yes
smtp_rcpt_timeout = 300s
smtp_rset_timeout = 120s
smtp_sasl_auth_enable = no
smtp_sasl_password_maps =
smtp_sasl_security_options = noplaintext, noanonymous
smtp_sasl_tls_security_options = $var_smtp_sasl_opts
smtp_sasl_tls_verified_security_options = $var_smtp_sasl_tls_opts
smtp_send_xforward_command = no
smtp_skip_5xx_greeting = yes
smtp_skip_quit_response = yes
smtp_starttls_timeout = 300s
smtp_tls_CAfile =
smtp_tls_CApath =
smtp_tls_cert_file =
smtp_tls_cipherlist =
smtp_tls_dcert_file =
smtp_tls_dkey_file = $smtp_tls_dcert_file
smtp_tls_enforce_peername = yes
smtp_tls_key_file = $smtp_tls_cert_file
smtp_tls_loglevel = 0
smtp_tls_note_starttls_offer = no
smtp_tls_per_site =
smtp_tls_scert_verifydepth = 5
smtp_tls_session_cache_database =
smtp_tls_session_cache_timeout = 3600s
smtp_use_tls = no
smtp_xforward_timeout = 300s
smtpd_authorized_verp_clients = $authorized_verp_clients
smtpd_authorized_xclient_hosts =
smtpd_authorized_xforward_hosts =
smtpd_banner = $myhostname ESMTP $mail_name
smtpd_client_connection_count_limit = 50
smtpd_client_connection_limit_exceptions = $mynetworks
smtpd_client_connection_rate_limit = 0
smtpd_client_restrictions =
smtpd_data_restrictions =
smtpd_delay_reject = yes
smtpd_enforce_tls = no
smtpd_error_sleep_time = 1s
smtpd_etrn_restrictions =
smtpd_expansion_filter = \t\40!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghi jklmnopqrstuvwxyz{|}~
smtpd_hard_error_limit = 20
smtpd_helo_required = no
smtpd_helo_restrictions =
smtpd_history_flush_threshold = 100
smtpd_junk_command_limit = 100
smtpd_noop_commands =
smtpd_null_access_lookup_key =
smtpd_policy_service_max_idle = 300s
smtpd_policy_service_max_ttl = 1000s
smtpd_policy_service_timeout = 100s
smtpd_proxy_ehlo = $myhostname
smtpd_proxy_filter =
smtpd_proxy_timeout = 100s
smtpd_pw_server_security_options = none
smtpd_recipient_limit = 1000
smtpd_recipient_overshoot_limit = 1000
smtpd_recipient_restrictions = permit_mynetworks, reject_unauth_destination
smtpd_reject_unlisted_recipient = yes
smtpd_reject_unlisted_sender = no
smtpd_restriction_classes =
smtpd_sasl_application_name = smtpd
smtpd_sasl_auth_enable = no
smtpd_sasl_exceptions_networks =
smtpd_sasl_local_domain =
smtpd_sasl_security_options = noanonymous
smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
smtpd_sender_login_maps =
smtpd_sender_restrictions =
smtpd_soft_error_limit = 10
smtpd_starttls_timeout = 300s
smtpd_timeout = 300s
smtpd_tls_CAfile =
smtpd_tls_CApath =
smtpd_tls_ask_ccert = no
smtpd_tls_auth_only = no
smtpd_tls_ccert_verifydepth = 5
smtpd_tls_cert_file =
smtpd_tls_cipherlist =
smtpd_tls_dcert_file =
smtpd_tls_dh1024_param_file =
smtpd_tls_dh512_param_file =
smtpd_tls_dkey_file = $smtpd_tls_dcert_file
smtpd_tls_key_file =
smtpd_tls_loglevel = 0
smtpd_tls_received_header = no
smtpd_tls_req_ccert = no
smtpd_tls_session_cache_database =
smtpd_tls_session_cache_timeout = 3600s
smtpd_tls_wrappermode = no
smtpd_use_pw_server = no
smtpd_use_tls = no
soft_bounce = no
stale_lock_time = 500s
strict_7bit_headers = no
strict_8bitmime = no
strict_8bitmime_body = no
strict_mime_encoding_domain = no
strict_rfc821_envelopes = no
sun_mailtool_compatibility = no
swap_bangpath = yes
syslog_facility = mail
syslog_name = postfix
tls_daemon_random_bytes = 32
tls_daemon_random_source =
tls_random_bytes = 32
tls_random_exchange_name = ${config_directory}/prng_exch
tls_random_prng_update_period = 60s
tls_random_reseed_period = 3600s
tls_random_source =
trace_service_name = trace
transport_maps =
transport_retry_time = 60s
trigger_timeout = 10s
undisclosed_recipients_header = To: undisclosed-recipients:;
unknown_address_reject_code = 450
unknown_client_reject_code = 450
unknown_hostname_reject_code = 450
unknown_local_recipient_reject_code = 550
unknown_relay_recipient_reject_code = 550
unknown_virtual_alias_reject_code = 550
unknown_virtual_mailbox_reject_code = 550
unverified_recipient_reject_code = 450
unverified_sender_reject_code = 450
verp_delimiter_filter = -=+
virtual_alias_domains = $virtual_alias_maps
virtual_alias_expansion_limit = 1000
virtual_alias_maps = $virtual_maps
virtual_alias_recursion_limit = 1000
virtual_destination_concurrency_limit = $default_destination_concurrency_limit
virtual_destination_recipient_limit = $default_destination_recipient_limit
virtual_gid_maps =
virtual_mailbox_base =
virtual_mailbox_domains = $virtual_mailbox_maps
virtual_mailbox_limit = 51200000
virtual_mailbox_lock = fcntl
virtual_mailbox_maps =
virtual_minimum_uid = 100
virtual_transport = virtual
virtual_uid_maps =
Message was edited by: JVicious
Message was edited by: JVicious

Ok, so I used mailfbr to try and fix it anyways, just to see what would happen. That didn't fix it, so I thought I could use the Backup program and just restore to an earlier point to see if the original settings could be restored, tat didn't work either, that totally messed everything up worse. I've had problems connecting to the lmtp socket, reading the mailbox file, permissions, but I think I've fixed all those. The only problem now is that everything gets stuck in the queue. I've checked these topics almost the whole day for these problems, but the cause and solution are not the same for me. Anything I can do? Or should I just start fresh again?
postconf -n
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = all
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mydestination = $myhostname,localhost.$mydomain,localhost,aetkinz.com,sellwiz.biz,riflematch.co m
mydomain = aetkinz.com
mydomain_fallback = localhost
myhostname = mail.aetkinz.com
mynetworks = 127.0.0.1/32,10.0.11.0/24,192.168.34.0/24
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdtls_keyfile =
unknownlocal_recipient_rejectcode = 550
70-91-236-58-BusName-Michigan:/usr/sbin root# postconf -n
always_bcc =
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = all
localrecipientmaps =
luser_relay = postmaster
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mydestination = $myhostname,localhost.$mydomain,localhost,aetkinz.com,sellwiz.biz,riflematch.co m
mydomain = aetkinz.com
mydomain_fallback = localhost
myhostname = mail.aetkinz.com
mynetworks = 127.0.0.1/32,10.0.11.0/24,192.168.34.0/24
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdtls_keyfile =
unknownlocal_recipient_rejectcode = 550

Trashing SMTP server listings??

i have a boatload of SMTP servers listed in Mail settings on my iphone 5 using ios7. in most cases these are duplicates.
i am having trouble getting this error message and i would like to clean up this section of my settings and basically start again with SMTP settings. is there a way to delete all the junk in here?
feels like i have been carrying this around since iphone 3 ios-beginning-of-time.
THANKS

I don't think that matters, but here's an older document:
iCloud- Configuring Mail with Mac OS X v10.6 or iOS 4

Send iCloud email from alternative smtp server?

How do I send iCloud email from alternative smtp server? The setting is 'greyed out' on my iPhone so I cannot tell iCloud to use another server.
The reason is so I can have my outgoing email appear from my own domain email address rather than my me.com address. Mobileme would allow this - and Mail on the Mac does allow it, but the iPhone under iOS 5 seems not to allow it....
Any ideas?

I have spent about 4-6 hours working directly with folks from Tim Cooke's office, various support levels, and through them their engineers.
As much as I tried to convince them their logic is flawed, the engineers for iCloud come back and say this is expected behavior because somehow it helps secure iCloud from being a spam source. The fine and helpful gentleman from Cooke's office now understands how it is a MobileMail.app client issue, having nothing to do with iCloud servers (because we are in fact trying to bypass their servers) still totes the "it's expected behavior" line from the server engineers.
I have implored him to follow up with the iOS MobileMail app programmers and not the iCloud programmers. I am hopeful he will. Until then you have to choose between having iCloud push and losing your online identity, or losing push email and keeping your preferred address.
Fun to try: turn off all smtp servers. Send email. Gets stuck in outbox. Turn on your preferred smtp server. That one email will use your preferred alternate address, but subsequent ones revert back to the old .me.com smtp servers. Personally I believe this points to a client programming error more than reinstating a preferred behavior. Aggravating!
I spend $500 on a new phone. Google takes away my exchange client ability and apple makes me choose push email vs outgoing email address.

I cannot acess some of my emails. Thunderbird keeps saying "connection to SMTP server (email adress) timed out. What does that mean? What do I do please?

I purchased 2 new email, adresses a few weeks ago. Both were fine but a few days ago I was stopped sending and stopped receiving emails on the one. The message comes up on my screen "connection to SMTP server (followed by my email adress) timed out. That does not mean a thing to me. What should I do please?

Thankyou.
I had been asked by ICANN some days ago to do something but I thought it was a scam so ignored it. Most other users I have spoken to have never heard of ICANN or been asked to 'register' with them or whatever. Anyway, post writing to you I have now 'registered' with them . When I now click on my incoming email adress it just says "failed to connect to server" but why it fails I do not know.

How to send email to a SMTP server over a secure channel using STARTTLS setting of a send connector (Exchange and SMTP server are in the same domain)

I’m trying to send email using exchange send connector STARTTLS setting to the SMTP server. I have read multiple documents on configuring TLS for send connector, but they talks about outbound connections to internet facing servers. My Exchange 2013 and SMTP
server is in the same domain (let’s say A.com) and I’m creating dummy domains on my SMTP server (e.g.
[email protected],
[email protected] ) and their respective send connectors on the exchange server end. In the smart host section added the IP address of the SMTP server and in the scoping section added the SMTP domain address (e.g. dummy1.local ). In the FQDN field, added
the FQDN of the exchange server 2013 which certificate is enabled with SMTP service.
Could you tell me a step by step procedure, where I’m going wrong or any extra settings needs to added?
Presently, it is giving me an error that 530 5.5.1 TLS encrypted connection is required.
Note: I’ve created the Microsoft CA certificates for the SMTP and exchange servers and imported them in the personal certificate container. In which, the exchange certificate is created with FQDN name of the server and enabled for the SMTP service.
I’m using OPENSSL certificate for making the SMTP server TLS enabled. (let me know, if I need to import the OPENSSL certificate anywhere on the exchange end)?
Thanks!

-IgnoreSTARTTLS is set to false on the send connector properties.
I'm trying to established a HTTP over TLS connection. I'm not using mutual TLS between these two server.
The send connector protocol logging is attached as below,
2014-09-22T20:09:45.468Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,2,10.219.3.74:24939,10.219.3.73:25,<,220 SMTP.A.local Welcome (MTA version),
2014-09-22T20:09:45.546Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,3,10.219.3.74:24939,10.219.3.73:25,>,EHLO Exchange.A.local,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,4,10.219.3.74:24939,10.219.3.73:25,<,250-SMTP.A.local Exchange.A.local OK,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,5,10.219.3.74:24939,10.219.3.73:25,<,250-SIZE,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,6,10.219.3.74:24939,10.219.3.73:25,<,250-8BITMIME,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,7,10.219.3.74:24939,10.219.3.73:25,<,250-BINARYMIME,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,8,10.219.3.74:24939,10.219.3.73:25,<,250-PIPELINING,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,9,10.219.3.74:24939,10.219.3.73:25,<,250-HELP,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,10,10.219.3.74:24939,10.219.3.73:25,<,250-DSN,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,11,10.219.3.74:24939,10.219.3.73:25,<,250-CHUNKING,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,12,10.219.3.74:24939,10.219.3.73:25,<,250-AUTH SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,13,10.219.3.74:24939,10.219.3.73:25,<,250-AUTH=SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,14,10.219.3.74:24939,10.219.3.73:25,<,250-STARTTLS,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,15,10.219.3.74:24939,10.219.3.73:25,<,250-DELIVERBY,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,16,10.219.3.74:24939,10.219.3.73:25,<,250-MT-PRIORITY,
2014-09-22T20:09:45.640Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,17,10.219.3.74:24939,10.219.3.73:25,<,250 ENHANCEDSTATUSCODES,
2014-09-22T20:09:45.655Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,18,10.219.3.74:24939,10.219.3.73:25,>,STARTTLS,
2014-09-22T20:09:45.671Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,19,10.219.3.74:24939,10.219.3.73:25,<,220 2.7.0 Ready to start TLS,
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,20,10.219.3.74:24939,10.219.3.73:25,*,,Sending certificate
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,21,10.219.3.74:24939,10.219.3.73:25,*,CN=Exchange.A.local,Certificate subject
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,22,10.219.3.74:24939,10.219.3.73:25,*,"CN=DC-CA, DC=A, DC=local",Certificate issuer name
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,23,10.219.3.74:24939,10.219.3.73:25,*,63E7E70100000000000B,Certificate serial number
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,24,10.219.3.74:24939,10.219.3.73:25,*,CAEB1200CDF49715E5F2E4B8315EFDDC01F8F945,Certificate thumbprint
2014-09-22T20:09:45.780Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,25,10.219.3.74:24939,10.219.3.73:25,*,Exchange.A.local,Certificate alternate names
2014-09-22T20:09:46.654Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,26,10.219.3.74:24939,10.219.3.73:25,-,,Local
2014-09-22T20:09:46.669Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,0,,10.219.3.73:25,*,,attempting to connect
2014-09-22T20:09:46.685Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,1,10.219.3.74:24940,10.219.3.73:25,+,,
2014-09-22T20:09:46.701Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,2,10.219.3.74:24940,10.219.3.73:25,<,220 SMTP.A.local Welcome (MTA version),
2014-09-22T20:09:46.701Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,3,10.219.3.74:24940,10.219.3.73:25,>,EHLO Exchange.A.local,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,4,10.219.3.74:24940,10.219.3.73:25,<,250-SMTP.A.local Exchange.A.local OK,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,5,10.219.3.74:24940,10.219.3.73:25,<,250-SIZE,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,6,10.219.3.74:24940,10.219.3.73:25,<,250-8BITMIME,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,7,10.219.3.74:24940,10.219.3.73:25,<,250-BINARYMIME,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,8,10.219.3.74:24940,10.219.3.73:25,<,250-PIPELINING,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,9,10.219.3.74:24940,10.219.3.73:25,<,250-HELP,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,10,10.219.3.74:24940,10.219.3.73:25,<,250-DSN,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,11,10.219.3.74:24940,10.219.3.73:25,<,250-CHUNKING,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,12,10.219.3.74:24940,10.219.3.73:25,<,250-AUTH SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,13,10.219.3.74:24940,10.219.3.73:25,<,250-AUTH=SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,14,10.219.3.74:24940,10.219.3.73:25,<,250-STARTTLS,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,15,10.219.3.74:24940,10.219.3.73:25,<,250-DELIVERBY,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,16,10.219.3.74:24940,10.219.3.73:25,<,250-MT-PRIORITY,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,17,10.219.3.74:24940,10.219.3.73:25,<,250 ENHANCEDSTATUSCODES,
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,18,10.219.3.74:24940,10.219.3.73:25,*,,sending message with RecordId 52652004081667 and InternetMessageId <[email protected]>
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,19,10.219.3.74:24940,10.219.3.73:25,>,MAIL FROM:<> SIZE=7653 BODY=BINARYMIME,
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,20,10.219.3.74:24940,10.219.3.73:25,>,RCPT TO:<[email protected]>,
2014-09-22T20:09:46.825Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,21,10.219.3.74:24940,10.219.3.73:25,<,530 5.5.1 A TLS-encrypted connection is required,
2014-09-22T20:09:46.950Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,22,10.219.3.74:24940,10.219.3.73:25,<,503 5.5.1 unexpected RCPT command,
2014-09-22T20:09:46.981Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,23,10.219.3.74:24940,10.219.3.73:25,>,RSET,

Authentication Error while Sending Email from SMTP server.

Authentication Error while Sending Email from SMTP server. Can receive emails but cannot send emails from this account.

no email account was setup on the phone unless it was issued by your company.
gmail is required but no server address ports to enter.
my gmail account was setup before i took delivery of the phone but could have been done when phone was activated.
i added cox pop3 email and had to manually enter both pop3 and smtp servers with both boxes checked on both servers.
i doubt if it's a verizon issue.

Can I change the smtp server with Yahoo push account?

My yahoo email account will send and receive over EDGE using the default yahoo mail settings. On my home Cox internet WiFi network I can retrieve messages but cannot send. When sending it says it was sent and makes the "swooshing" mail sent sound, but the message disappears. It does not appear in the "sent" folder or "drafts" folder either. No error message is returned.
I suspect this is related to Cox blocking the smtp server, but the iPhone does not allow me to change the smtp settings on the default yahoo account. Does anyone know how to do this? I can set it up manually for POP access, but then I'm flooded with spam.

No, you cannot change the SMTP server on the Yahoo push account.
Yahoo push only works if you configure your account using the Yahoo! Mail shortcut on the iPhone, and that shortcut does not allow for ANY customization.

Changing verizon primary smtp server??

hi,
i'd like to change the primary smtp server for my verizon email.
it's currently set to : outgoing.verizon.net
and according to a recent email from verizon, i should change it to|
smtp.verizon.net
(all the other info doesn't change (passwords, ports, etc)
if i tweak the primary smtp server and change the hostname from 'outgoing' to 'smtp'
then hit 'done', the settings app crashes and doesn't update the settings.
any help would be appreciated,since i can currently recieve mail, but can't reply on that account!
lcubed
iphone 5/ios 6.1.3

This probably means that your mail app data are corrupted. First, try resetting the phone by holding the HOME and SLEEP buttons until an Apple logo appears. The try to change the setting again. If it still fails, delete the Verizon account, Reset the phone again, and add the account back.

What is the AT&T smtp server for? The SSL is set to "off"

I was looking around at my Mail settings on my iPhone and noticed there's an AT&T smtp server window. You access it my Settings/Mail Contacts Cal/one of your email accounts/SMTP server/. At the top is the smtp server for your email address which is on, and below are smtp server panes for your other email accounts which are set to off. But one of those smtp server panes is for the AT&T smtp. For what function is it used for? It's vreyed out but SSL set to OFF for the AT&T smtp and the Yahoo smtp, but all the other smtp's are set to ON for SSL.
Isn't it better for the Secure Sockets Layer (SSL) to be on? Why is Yahoo's and AT&T's set to OFF. I can't find where to access a non-greyed out AT&T's smtp window pane.

Allan Sampson wrote:
when sending/receiving via AT&T's cellular network, all data is encrypted over the network, which is a GSM standard.
Note that in the USA a weaker version of the GSM encryption is used than in Europe.
http://www.gsm-security.net/faq/gsm-encryption-algorithm-a5-cipher.shtml
Also, the GSM encryption has been broken a long time ago, but someone whould have to sit between the phone and the basestation to capture and decode the traffic (or they must have access to the network operator's, so called, Legal Intercept interface).
http://www.gsm-security.net/faq/gsm-a5-broken-security.shtml
And, AFAIK, the GSM encryption is only in use on the wireless connection between the device and the basestation it is connected to (not on the operator's backbone network, and not when the traffic exits the operator's network and goes to the Internet outside, which it must, in order to get to SMTP servers not in the operator's machine rooms).
And a last point: Even if you use SSL/TLS between the client and the SMTP server, it is not necessarily used from the SMTP server to the receiving email server (which might mean that the message travels through tens of systems unencrypted until it reaches its destination).

My external SMTP server went offline

Hi,
I have been using my domain's SMTP server forever to send emails from my domain's email accounts. All of a sudden last week, the server went off-line.
My hosting provider says that nothing has changed on their end and all the tests I can do seem to agree with their position.
I can send emails from the web-based email application which uses the same server, I can telnet to the server using the same port that I use to connect (465). I can ping the server, but my email application (Apple Mail) will not connect to the server anymore no matter what settings I try.
Has Verizon made any changes to their system that would cause my not to be able to connect to the server?
Although I can get mail out using outgoing.verizon.com, I am having email deliverability issues becasue many of the receiving incoming servers think the email might be spam because the email address is from one domain, but the SMTP server is from another. I have tried to remedy this with updates to the SPF record but that has had limited success.
Any suggestions would be greatly appreciated.
Thanks,
Dom
Solved!
Go to Solution.

I have exactly the same problem.
I have been using the same account for years. I can access email through web browser, and forward e-mails to my blackberry. Mac Mail, Mac Outlook, IPAD can no longer access my verizon yahoo email account. I have tried every suggestion to date. Tried every port combination suggested. Deleted all accounts and started from scratch.. Reset IPAD from scratch, with SSL on and off, and just about every port possible. The last email I recieved through Mail was Feb 3. Downloaded the automated program which didnt work, I tried onlinechat with Verizon tech, but they claimed that since I could still access email through the web, its an Apple software issue. The Apple store is blaming Verizon for not providing the approprate port info etc to access. And truthfully, with all of the information on the verizon website to set up mail client software, there is no set of rules that seems to apply. Every one is suggesting hit or miss solutions.
Sorry to ramble on, but this is really frustrating, and I am not a novice at this.
Mac 10.7.3
Mail 5.2
Outlook 14.1.4
Verizon Yahoo email account
Please help

IPhone email (one acct dead, other receives but won't send)

I usually use Entourage, so I set up email in Mac Mail since that's the program iPhone reads from, correct? I have two email addresses, both with same provider (our own website via Hostway) and I receive and send both accounts fine in MacMail. On the iPhone however, I'm getting email for only one of the two accounts. And for that one that i can receive email from, I can't send to.
I am used to the SMTP settings, but if I change it on the phone won't it just override it the next time it syncs with MacMail, which works fine?
I've tried to look through other threads but I didn't see anything for this specific problem.
thanks
enzo

The iPhone only reads settings from mail.app if that option is checked in iTunes under the info tab when the iPhone is connected. You can set up the email on the phone independent of what is on your computer. Are these pop accounts, and what type of error do you receive for the account that can't receive email? And for the account that can't send, what errors are you receiving? A common problem is that the outgoing mail server for most ISPs can only be used when on that ISPs network without authentication. If your ISPs smtp server does not allow authentication from other networks, you'll have to use another smtp server for the outgoing email.
In my case, my cable internet provider's email is received fine, but I cannot send email from that account using their smtp server (either on the phone or my MBP). So I have that account set to use a gmail smtp server instead so it can send email from any network.

MANY smtp server listings in iphone email...

Similar Messages

Maybe you are looking for