Map Loader Error

Hello,
i'm trying to use Nokia MapLoader but everytime I start the application i get a the following error:
"An unexpected error occurred. Try again. Sorry for the inconvenience."
my phone model is Nokia N95
please advise...

its definitely a proxy thing
I managed to connect with no problems at home - but found that the US map is over a gig! - as I'm on a 2mb connection at home, I thought I'd best use the 100g connection at work.....
but when I try laucnh the maploader at work - I get the unexpected error.
so last night I went home - fired up maploader.....but got the same error!
but after uninstalling and re-installing maploader I finally got it to work..
bit pants really as I had to leave my laptop on all night to download the US map.
nil marks out of 10 to Nokia for being environmentally friendly! - its a data file - why not just bung it on an html page for everyone to download?

Similar Messages

Map loader / error loading catalog

Hi there,
i have a problem with the "map loader" and my Nokia 5800 XM.
... the map loader worked as i bought the phone some months ago. Everything worked fine. Today i had to do a reset. The map is still working, but i cant get the map loader to work.
After the start of the program and sync with the 5800 XM im getting an errormsg (in german but im trying to translate).. "cannot load the catalog of the 5800 xm"
Thats it. I googled whole day, but found no solution... so this forum is my last help right now.
It worked (today) before i have done the reset so im thinking that its not my OS (Windows7 64bit).
thx in advance
Murt

one more thing.. i have updated the FW today to the newest available. 50.0.005
found also another thread here /t5/Maps-Navigation-and-GPS/Map-Loader-error-while-loading-catalogue/td-p/624895/page/2
might be an FW problem then?

Nokia Map Loader Error in connection

Hi Guys,
I have an N80 and have the MAPS software installed on my phone and the Nokia Map Loader software on my Laptop. However, in order for me to download the maps I have to connect my N80 to my laptop in Data Transfer Mode and then run Nokia Map Loader. This should then allow me to download the Maps. I get an error when connecting to my laptop in Data Transfer Mode. It just says Invalid usb connection or something like that. No I don't think it is the maps software but I would like to know if any of you had the same problem before and how it can be resolved. I sent a note to Nokia Tech team to see if they know but it takes a while for them to get back to you.
So, does anybody know how I can get past this or get the MAPS downloaded?
Any advice would be greatly appreciated.
Cheers

can´t connect nokia map loader, error, won´t work?
I had this same problem, found your post looking for an answer (lol), and I just SOLVED the problem ; )
First, you don´t connect in data transfer mode. You must use pc suite mode, or it won´t work.
Second, (and this is the tricky part), YOU HAVE TO INSTALL nokia maps on your smartphone (so far ok, we all know this), but then you have to RUN THE PROGRAM ONCE.
Don´t ask me why, but if you just install nokia maps, then try to connect with nokia map loader, it won´t work. You have to install the program then run it once. Exit the program, then connect to you pc (nokia map loader) with pc suite mode.
BTW, do NOT install nokia maps on your smartphone on the phone memory. ALWAYS USE THE CARD MEMORY, install nokia maps on your memory card, because the maps are so huge. Most phones won´t have enough internal space.
So this is it, no more suffering. Damn, I´m good ; )
Message Edited by unsterblich on 17-Jan-2009 03:54 PM

N82 map loader error...PLZ HELP!!!

I' have a problem with my map loader and I hope someone can help me. When I try to open map loader on my PC it gives me an error saying:
'' unhandled exception has occured in a component in yr application. If u click continue the application will ignore his error error and attempt to continue.
Font 'Tahoma' does not support style 'Regular' ''
What I supposed to do? How can I change that font thing? Please help...
thank you....

Hi theog
In "Add or Remove Programs" do you have "Microsoft .NET Framework 2.0" or later?
Do you see "Tahoma" listed under the Fonts folder which is under the WINDOWS folder?
Happy to have helped forum in a small way with a Support Ratio = 37.0

Map Loader error while loading catalogue

XM 5800, latest firmware, Maps 3 installed and working OK. I get "Error while loading catalogue for Nokia 5800 XpressMusic" whenever I start Map Loader 3.
Uninstalled/reinstalled Map Loader 3 several times.
Tried suggested fixes of deleting qf and cities folder then running Maps to recreate file structure.
Tried it on a Windows 7 PC with PC Suite and also a Vista PC with Ovi Suite. Same error message.
I am left without the ability to download any maps except over the air as I go incurring data charges.
So I may as well just use Google maps!
I see in the discussion groups this issue comes up for many different Nokia phones occasionally but I have never seen a solution.
Anyone?
Solved!
Go to Solution.

Just when I thought Nokia Care technical support knew what they were doing!!!!
About 4pm NZ time yesterday, after the Map Loader server had been working for about 3 to 4 hours and everything was fine. I got a call from Nokia tech support. I was on the other line so they left a message.
"Sorry, its not going to work because map loader is not completely compatible with Windows 7"
and my email support thread finally pointed me to a "Solution" discussion board entry detailing a fix for Maps 2. You had to download the latest version of Map Loader 2.02!!!!! That was really helpful considering we are on 3.03 and 3.0.28 respectively
So it all stating to work again may have just been coincidence and nothing to do with our support calls! :-<
Oh well at least its working. Now all I have to fix is the MTP USB Device driver failing.
Cheers
Brian

Map loader error!Help

Hi,
My phone is N95 8GB.
I have an error when using the map loader.
Below are my detail step.
1.change to "Data transfer mode" , there are message occur "USB data transfer mode activated.Mass memory may not be used during this time." Is it correct?
2.execute Map Loader (v1.2)
there are message occur "An unexpected error occurred.Try again.Sorry for the inconvenient."
Is any one know jow to resolve it???
thanks a lot.

07-Jan-2008 03:04 PM
jamestw wrote:
Hi,
My phone is N95 8GB.
I have an error when using the map loader.
Below are my detail step.
1.change to "Data transfer mode" , there are message occur "USB data transfer mode activated.Mass memory may not be used during this time." Is it correct?
2.execute Map Loader (v1.2)
there are message occur "An unexpected error occurred.Try again.Sorry for the inconvenient."
Is any one know jow to resolve it???
thanks a lot.
Hello jamestw
I can help you with the first question. I can say thats normal. I always get that message, but I have no problem with it.
The other qestin might have to do with problems on the map server? Have you tried again? Try re-installing Map Loader!

The dreaded map loader error

Hi,
I've just gotten a new N95 8GB and am trying to download some maps to my phone. I have run the maps application on the phone and successfully connected the phone via USB in data transfer mode. The problem is I am getting the following error:
"An unexpected error occurred. Try again. Sorry for the inconvenience."
I've searched everywhere for a solution but without any luck. Sompe people reported proxy/firewall issues but I am running from a home connection and even moved my PC coonected to my phone into the DMZ without luck.
Has anyone been able to solve this problem or should I give up and keep what is left of my hair on my head?
grantonstar

I've been trying to get the maps via Nokia Map Loader 1.2.1. I just installed .net framework 3.0 and reinstalled with no luck either.
I've been using it with my home wifi connection but I want to be able to download a whole country so the map data is there for when I go out. Unless there is a way to pre-get a region or country direct from the phone?

Brand new E90 map loader error

When running the map loader first time it doesn't recognize neither the E90 in transfer mode or the memory directly connected to a usb port on my laptop. and map loader close up right away.
PC suite works fine and allows me to install any program in the phone memory or memory card.
Card is a 2GB which has more than 1.5 GB free.Message Edited by robmir on 28-Aug-200710:52 PM

Hi robmir
Have you run Maps application at least once with your memory card in E90 as this defines the folder structure that Maploader looks for to write data?
Happy to have helped forum in a small way with a Support Ratio = 37.0

Map Loader and Check In apps

My 808 pureview crashed a couple of weeks ago and now both the map loader and check in apps are not working I get a system error on the Check In app and a map loader error message when I try opening that app. I've done a firmware reinstall to see if that would sort it but it hasn't. I can only conclude that the two files are corrupted. Can anyone help?if it comes to it I will uninstall the entire Maps Suite but there is nothing listed in the Uninstall Applications list to do this. Will I have to find the individual files and delete them? If so can anyone tell me where they are in the C directory?
Thanks

Check in has been discontinued since version 3.9.95.However you can get it by searching over the net via Google search. I am using it but cant give You download links since that would be against forum rules.
In Love With My C6-01:Now running on Nokia Belle!

Error when start Map Loader

I found Error message, and asked me to start the application again, every time I start Map Loader version 1.2 (latest).
I installed, and was asked to install also NET Framework 3.0.
Some people said the error casued by NET Framedwork, but I could not run Map Loader without it.
I tried reformat my E61i and its memory card, but the problem occured the same.
Anyone facing the same problem? Any recommended solution?
Thank you for your help in advance!

You might not be able to download the .net framework 3.0 correctly using the installer for maps loader. Try this:
Download and install the .net framework 3.0 from this location ---> http://download.microsoft.com/download/4/d/a/4da3a5fa-ee6a-42b8-8bfa-ea5c4a458a7d/dotnetfx3setup.exe
Then try to install the Maps loader again, this time it will not ask you to install the .net framework.
~ the lost viking ~

Stor.e TV+ No Loader error keeps coming up when switching on

I have been experiencing continual problems accessing the hard drive. "No Loader" error message keeps coming up when switching on.
The so-called "solution" to this problem posted on this forum is to open up the box and fiddle with the cables. Whilst I have had some success with this method initially, dismantling the box 10 times a week is not on.
I tried something else in desperation.
When the No Loader message comes up, I switch the box off and on again from the remote.
After 2 or 3 times or so the HDD folder usually appears.
I have been doing this consistently now with great success. This however suggests that the No Loader error message is NOT a mechanical connector problem with the hard drive but (as usual) poor software (what else?).
Dismantling the unit is tantamount to switching it off for an extended period of time so may explain why this technique works.
Switching the unit on and off several times also solves the problem of the D folder not appearing on the network even though Win7 shows Store-TV-Plus as a mapped NTFS drive (but can't find the D folder).
See the similarity?
Another thing that exacerbates problems is the unit's poor ventilation. The first thing that happens with this unit is that the rubbish stick-on rubber feet fall off.
Whilst this may seem innocuous, the ventilation slots are underneath the unit and will be blocked if there are no feet. I live in a hot country so this device gets pretty hot and behaves even more erratically unless well ventilated.
Ideally keep it well away from other units and preferably sit it on a small box by itself with the vents underneath well exposed.
I also still experience problems playing FLAC and MKV files. The unit occasionally loses synch with FLAC files which generally otherwise play OK and locks up or causes loud bangs or white noise on the speakers (dangerous).
Some MKV files just don't play at all even though VLC plays them. There are a myriad other inconsistencies but these are the most annoying.
Is anyone else experiencing these problems or does anyone have any other solutions to prevent these problems?
I don't suppose we can expect another software upgrade from Toshiba? In your dreams, pal.

OK, so I took the risk and updated the firmware of my Stor.e TV+ to the Noontec V8S latest firmware V3.0816.13_V8S from noontec website.
The update went fine without a hitch (took about 2 minutes from an old 256MB flash drive plugged into the back USB port of the unit, which I formatted before using), and some of the irritating shortcomings of the Toshiba firmware was solved. Samba worked in some fashion, but I was still not able to download songs directly to the Stor.e over wireless, which is the only other feature I currently need. The irritating remote control buttons were changed to the way any sane person would use them (I had changed my universal remote control to correct this, so would have to change the settings if I kept the updated firmware) The new firmware seems solid, but I DON'T USE THE VIDEO CAPABLITIES, so I can't comment on this.
One major drawback of this update for me is that the small display on the unit becomes much less readable. Seems like there is a problem with the font on the new firmware. I use my Stor.e exclusively as a flac music player, and since I don't have it connected to a tv the small display is crucial for me to select tracks or disks. I have 300+ discs, so the Stor.e is an excellent cheap media player which I connect to my HIFI system via a DAC.
I thus had to change back to the Toshiba firmware to correct this problem. Seems like I would still have to use USB to download music to the Stor.e when I buy new CDs. What a pity.
Incidentally, the new Toshiba firmware is very much like the old firmware, in that it lacks the capability to switch on Samba. In the readme Toshiba states that the new firmware fixes a network problem, but I think that this is probably the smallest issue most users have with the Toshiba firmware.
So, my advice to anyone having video, control or other issues with the Toshiba firmware is to flash to the Noontec firmware to see if it resolves their issues. If it doesn't one can always revert to the official Toshiba firmware as I did.
You do this at your own risk though, if you brick your unit don't blame me...

SXMB_MONI : Mapping exception error - cause unknown

Hi! ALL
I am getting a mapping exception error....
However, if i copy the payload and run it through my test tab it is getting processed successfully.
Is there any other way i can debug this issue....as i do not see any problem with payload or the message mapping and I am getting the following error...
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_mm_204: RuntimeException in Message-Mapping transformatio</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Your help is greatly appreciated!!
Thank you,
Patrick.

Dear Patrick,
As our experts told you can trace by using ST01 and select your ID and start the trace then again test be editing and reactivating the scenario and test it again then you ill came to know if in case any issues.
1. Other way to test the scenario is Goto RWB--> Component Monitoring --> Select Adapter Monitoring --> Then select the TEST MESSAGE TAB and give Interface details inputs or copy or take your pay load from MONI and past here and check and changes are to be made and then test the message there itself .
2. Also as u can test the message in Message Mapping TEST TAB and test the mapping and also parallely do Cache Refresh in SXI_CACHE.
3. You can also check the status of the message in SYSEM STACK of message monitoring this is different from RWB message moni
[http://Host name:PORT/MessagingSystem/monitor/systemStatus.jsp]
4. YOu can also trace the message through this system stack also.
Regards:
Amar Srinivas Eli
Edited by: Amar Srinivas Eli on Jan 30, 2009 8:53 AM

Map Loader 3 doesn't see Internet connection

Hi,
I have installed Map Loader 3 on my XP Pro sp3 workstation that is connected to the Internet via a Workgroup Server running MS SBS 2003 Premium. Whenever I start the Map Loader application it quits immediately with the error message "Connection to the map server has been interrupted. Make sure that your Internet connection is working and retry ...".
The workgroup server exposes a web proxy server (ISA 2004) that my browser uses to connect to the Internet.
What do I need to change/adjust so that Map Loader can also enjoy this otherwise fine connection?
Thank you for considering my problem.

It may be that your AV is blocking the suite. Add it to your whitelist.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Most common BW data load errors in production and how to solve them ..

Hi All,
Most common BW data load errors in production and how to solve them ..
Any doc on it ,if so plz send it across to this id [email protected]
Thanks in advance.
Rgrds
shoba

hi
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light error message:
Master data/text of characteristic 'so and so' already deleted .
9) extraction job aborted in r3
10) request couldnt be activated because theres another request in the psa with a smaller sid
11) repeat of last delta not possible
12) datasource not replicated
13) datasource/transfer structure not active ´
14) Idoc Or Trfc Error
15. ODS Activation Error

Map Loader issue in 11.1.2.1

Hello professionals,
I am able to map all the dimensions by using map loader in 11.1.1.3. But i am unable to map in 11.1.2.1 version i am getting following error
Error: An error occurred importing the file .
Detail: Type mismatch
Row=3 SrcDesc=(sreenu) TargKey=(111110) ChangeSign=(False) WhereClauseType=(Error 2029)
can u people solve it my issue urgent
Regards
Reddy

Reddy,
if you are having an issue with the map loader you can do the following:
a) Choose Activities > Maps and add a map record
b) Click Export to Excel and save the excel file generated
c) Add your new mappings to the export file with the proper location id and dimension values (Clear the datakey field)
d) Update the ups named range to include the new rows
e) Re-import the file.

Map Loader Error

Similar Messages

Maybe you are looking for