Mapping failure in Null fields passing

Hi
We are facing some problem in null fields passing to RFC side.. some times the JDBC colums not having the data ,
so that time our map is failing to call RFC.
Please let me know any prevent methodologies for this?
Target side field occurances are 0...1
Regards
rambarki

Hi Rambarki,
since your target field is optional, you can map your target only if the value is present in the source, do not map if it is null.
Also are you getting any specific error ?
Have a look at this thread aswell..
JDBC Adapter: Mapping: result contains only null values
Regards
Anand

Similar Messages

Mapping Null fields.

Hi all,
Ive configured an IDOC-to-File scenario with the IDOC MATMAS. The file generated uses the nl as the record delimiter and #! as the field separator. Everything works fine except when the IDOC has null fields. In these cases the communication channel does not write these fields because they are not in the XML message and then the structure within the file is bad. I need to write the entire fields even if they are not in the XML-IDOC. I found the mapping function mapWithDefault but there are a lot of fields to map. Is there any other solution to force Comunication Channel or the mapping process to write all the fields even if they have null values?
Thank you in advance!

You shud map all the necessary fields manually using the graphical mapping for instantiating the fields on the target.
Regards,
Kittu.

How to map lookup main table field in another main table using MDM 7.1?

We created a new SAP MDM 7.1 repository with multiple main tables. The first main table is called ProductMaster table which contains Products information. The ProductCode is the primary key and the only display field for the table during data loading process. The second main table is ProductByRegion table which has a main table lookup field ProductCode and a RegionId field. These two fields (ProductCode and RegionId) combine as the PK for this main table. Both main tables have key mapping enabled.
I was able to load ProductMaster table using Import Manager. But Iu2019m having trouble to load data into ProductByRegion table using MDM Import Manager. Although I have met all the 5 requirements below (excerpted from MDM Import Manager Reference Guide P.222), the ProductCode wonu2019t show up on the destination value pane. If I mapped all productCode to NULL field, ProductCode wonu2019t load. If I u2018Addu2019 all ProductCode to Destination Value pane, the Import Manager added duplicated rows to Product Master table while only loading 1 record to ProductByRegion table. I canu2019t get ProductCode show up in Matching Destination Field list. When I checked ProductMaster records in MDM Data Manager, I right-clicked on one of records, chose Edit Key Mappings, it didnu2019t show anything. However, if I right-clicked on one of those duplicated rows, Edit Key Mapping shows remote system and key correctly.
Where did I do wrong? How can I fix the problem?
Thank you for help in advance.
From: SAP MDM Import Manager Reference Guide:
Mapping to Main Table Lookup Destination Fields
Import Manager handles main table lookup fields (Lookup [Main])
differently than other MDM lookup fields. Specifically, Import Manager
does not display the complete set of display field values of the records
of the underlying lookup table. Instead, the values it displays for a main
table lookup field are limited by both the key mappings for the lookup
table and the values in the source file.
Also, Import Manager does not automatically display the values of a
Lookup [Main] destination field in the Destination Values grid when you
select the field in the Destination Fields grid. Instead, for a main table
lookup field value to appear in the Destination Values grid, all of the
following conditions must be met:
u2022 The lookup table must have key mapping enabled
u2022 The lookup field must be mapped to a source field
u2022 The source field must contain key values for the lookup table
u2022 The destination value must have a key on the current remote system
u2022 The destination valueu2019s key must match a source field value
NOTE ►► The current remote system is the remote system that was
selected in Import Manageru2019s Connect to Source dialog (see
u201CConnecting to a Remote Systemu201D on page 416 for more information).
Vicky

Hi Michael,
Thank you very much for your response. I'm new to SAP MDM, I need some clarification and help regarding your solution.
I did use two maps to load ProductMaster and ProductByRegion separately. Here were my steps:
1. create main table ProductMaster with key mapping enabled at the table level and set ProductCode as unique and writable once (primary key).
2. create a map to load ProductMaster record from a staging table located an oracle database. But Key mapping didn't show anything when I looked at them using Data Manager.
3. create main table ProductByRegion with a lookup field looking at ProductMaster table. This field and RegionId combines as a unique field for ProductByRegion table.
4. create a map to load ProductByRegion table. But ProductCode records only shows on the source pane not destination pane and can't be mapped properly.
My questions:
1. How can I "Ensure that you add key mapping info for all ProductMaster records" besides enabling Key Mapping on the table level?
2. How can I define a concatenation of ProductCode and RegionId as a REMOTE KEY"?
Thanks a lot for your help!
Vicky

In XI Mapping multiple fields mapping to single target field.

Hi Friends,
In XI Mapping multiple fields mapping to single target field.
For example my requirement is :
Source Fields:(This RFC BAPI Structure)
Empno                0-1
EmpName           0-1
Address             0-1
Taget Field is:
Details               0-1
The above three fields passed to the Details Field. Here i am using Concat function
But i have one query on that on,Every field having "line Break" required.
Can you please help me out above this requirement.
Thanks in Advance,
Sateesh N.

If you want a line break between the three fields, then try
passing a,b,c to the udf and in the udf you would have
return a+"\n"+b+"\n"+c;

Word couldn't send mail because of MAPI failure, Unspecified error.

This issue is crossposted in Microsoft Answers Word and OUTLOOK. I am posting here in hopes that someone at Mircrosoft may have a solution or at least elevate the issue to someone who does.
http://answers.microsoft.com/en-us/office/forum/officeversion_other-word/word-could-not-send-mail-because-of-mapi-failure/f62678fe-ef1d-42b5-8cfe-1e43d6a1d609
http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/word-couldnt-send-mail-due-to-mapi-failure/1f03cf74-9258-411b-9e2b-e41cb5006d71
I dabble with VBA and write and maintain several amateur Word Add-Ins. Accordingly, I have Word 2003, 2007, 2010 and 2013 installed on my PC. They get along fine. However, I am unable to "Share" or "Send" an open Word
document as an E-mail attachment in any version! In each case Word returns an error mesage "Word couldn't send mail because of a MAPI failure, Unspecified error (the same issue occurs with Excel and Powerpoint except the error dialog is a bit different.)
Using Word 2003, I (CAN) "Send to (Mail recipient for review)" in which case OUTLOOK is opened with the document as an attachment. I can also "Send to Mail Recipient" from Windows Explorer, in which case the Word file is attached to
an OUTLOOK message, and I can create an instance of OUTLOOK and send mail from Word using VBA.
I have repaired all Office versions. I have removed the registry keys for all office versions and repaired all versions again. I have run "fixmapi" until I am blue in the face. I have renamed the MAPI32.DLL files and ran sfc \scannow
to ensure that the MAPI32.DLL file is not corrupt. In view of these actions and in view of what I can do, something tells me that the MAPI files are fine.
So what is this "Unspecified error?" This problem is rife on the internet and most of the "canned" solutions have been marked "Answered" by some MS support engineer. These "canned" solutions might have
fixed the issue at one point, but they don't work now. At least not for me.
Thanks.
Greg Maxey Please visit my website at: http://gregmaxey.mvps.org/word_tips.htm

Hello Greg,
I noted that there are 2 knowledge articles that describe scenarios where you may encounter this error.
KB 291152 You receive a "Word couldn't send mail because of MAPI failure" error message when you try to send a Word document as an e-mail attachment in Word 2002
http://support.microsoft.com/kb/291152/EN-US
KB 929362 You cannot send a file by clicking Send in a different program when Outlook 2007 is running as administrator
http://support.microsoft.com/kb/929362/EN-US
Please let me know the following:
1. What version of Outlook are you using?
2. Do you have Outlook open when you attempt the File > Share > Email as attachment from Word? If not, does the error occur if you open Outlook, open Word and then try to send the email?
3. If you close/reopen Word and then try the send again, do you get the same error?
4. Are you running either Outlook or Word in an elevated mode?
5. What happens if you start both Outlook and Word as "Run As Administrator". You may have to right-click each applications' .exe file to be able to choose the "Run As Administrator" option.
6. Do you get the same error when using File > Share > Email as attachment using Excel?
7. In Internet Explorer, open the Internet Options. On the General tab within the browsing history, delete your temporary Internet files and website files
8. Does the issue occur in selective startup mode?
Steps to setup selective startup mode:
Click on the Windows Start button, in the Search box type msconfig and then hit enter. This should open up the System Configuration Utility. Make the following adjustments within each tab.
Services Tab:
- Check the option 'Hide All Microsoft Services'
- Click on button 'Disable All'
Startup Tab:
- Click the button 'Disable All'
- Go back through the list and enable any Microsoft items
Click Ok. It will say “You must restart your computer for some of the changes
made by System Configuration to take effect”. Hit the ‘Restart’ button.
When the PC reboots try to run your test again.
To return back to a normal boot launch msconfig again and choose 'normal startup' on the general tab, click Ok and then reboot the PC.
Regards,
Dennis

Mandatory fields passing to the structure POCOND in BAPI_PO_CREATE1

Hi,
Please help me that what are the mandatory fields passing to the structure POCOND in BAPI_PO_CREATE1. I am using BAPI to create the PO based on certain conditions. But after creating the PO the condition values are not updating properly. Currently i am not passing any values to the structure.
Your solutions should be highgly appreciated. Please help me this issue as early as possible
Regards,
Uday

Hi ,
In my current requirement i m using BAPI_PO_CREATE1 to create the PO.
I am passing all the line item detials to the BAPI.
For some of the material rounding value are maintained in MM02 on MRP view.
If the line item material maintains rounding value then instead of taking the PO item quantity, it is taking the rounding value that has maintained in MM02. So to control that i have done the forceful updation using the update statement in one of the exit on BAPI_PO_CREATE1.
Here i m facing one problem. Now i can able to udpate the PO quantity correctly.
But the Condition value maintained in the Condition View still taking the rounding value for calculating.
To control this also i am using update statement on KONV table and the field is KAWRT. But this value is not updating.
Please help any one that in which table the the condition value is going to update and wht are the criteria to update the Condition Value field.
Points should allocate for suitable answer.
Thanks
Uday

MAPI failure Word 2013 --- Outlook 2010

One of my clients upgraded from Office 2010 to Office 2013, but had to keep using Outlook 2010 because Xobni doesn't work yet with 2013. When she tries to send a Word 2013 document as an attachment from within Word 2013 through Outlook 2010 she gets the
MAPI failure error message (link broken). Same document in Word 2010 works fine. Tried loading the pst into her Outlook 2013 as a test, and it worked. Seems specific to this combination. Any workaround? Manageable, but interferes with productivity and error
prone.

I had similar issue. I finally figured it out.
Rename Msmapi32.dll located in C:\Program Files (x86)\Common Files\System\MSMAPI\1033
I spent a few hours looking and found this:
http://support.microsoft.com/kb/926196/en-us
(Similar issue on Outlook 2003-2007)
Tried this and it worked for my Windows 7 Office 2010 issues after downgrading from 2013.

How can L identify what are the not null fields of a table in a stored procedure ?

How can L identify what are the not null fields of a table in a stored procedure ?

You could query the data dictionary:
SELECT column_name
FROM all_tab_columns
WHERE owner = '...'
AND table_name = '...'
AND nullable = 'N'

Retreive IDOC number and map it to a field in Target XML

Hi Experts,
IDOC to file scenario
I have a requirement where I have to retreive the number of the IDOC generated and map it to a field ID in the target XML.
Do i have to use a UDF for this? can ne one pls explain?
Regards,
Teja

Hi Ravi,
You dont need use a UDF for this.
this is a very simple requiremen.
You can get the IDOC number from source IDOc
under EDI_DC40 node field name DOCNUM.
This DOCNUM fielsd will contain the IDOC number
Map this DOCNUM field from source IDOC to target XML structure.

JDO : how to map a byte array field correctly

Could someone please provide an example on how to correctly map a byte array field in a PCClass.
The field should be mapped to a BLOB field in my Dictionary project.
The checker keeps throwing errors during the enhancement process. Tried all sorts of combinations of xml in my jdo and map file (using the dtd) but I still haven't found the solution. The compilation works fine though, it is only the checker that complains.

You're already in a PDF open in Acrobat (not the free Adobe Reader) and you've made a new PDF? Which you want to save to disk and reopen?

Don't want to trigger alert in mapping failure

Hi Experts,
I have defined one alert category and corresponding rule in RWB to trigger alert for any failure like Receiver determination error, mapping error etc for all interfaces like Create order, cost center, shipments etc.
I have done complete configuration and getting alerts email in mail box if any interface fails with any reason.
But, Now, I came up with requirement that for one particular interface the alert should not trigger for mapping failure only and other interface should also not affect.
Need your help to configure the same.
Thanks in advance for your help.
Regards,
Shele.

Thanks a lot for replies.
the solution achived by defining as suggested.
u2022 Created alert rule for interface specific with u201CNo Restrictionu201D to handle all types of error instead of one generic rule to handle all interfaces.
u2022 Created Multiple Rules ( Like Receiver determination error, IDOC Adapter errors etc) instead of "No Restriction" for required interface to handle errors excluding mapping error. It had sucessfully suppressed the alerts only if u201Cmapping Erroru201D occurs.
Thanks,
Shele.

How to catch a mapping failure event

Hi All,
Is there a way to catch a mapping fauilure and take an appropriate action like sending a fault message to the sender system?
Does the fault message feature serve the same purpose? Will a fault message be always triggered if there's a mapping failure?
Thanks,
Sandeep

Hi Santhosh,
Thank you so much for your answer. I've assigned you points as well
Is it possible to write some custom code for managing this alert? An example:
When a mapping failure occurs, I would like to make a web service call to the sender system.
Ay thoughts?
Thanks,
Sandeep

In WebI report, is that possible to show ZERO in NULL fields?

in WebI report, is that possible to show ZERO in NULL fields? crystal report has no issue, but i could not find a way to set ZERO to NULL field
can you tell?

Bram,
This formula you used above is corrcet but is returning you a character '0' and when a descending sort is applied character values will be at the top.
So , apply the formula 'ToNumber' on the value returned form the above formula :-
ToNumber(above formula)
And then it will change 0 to number and give you the exact sort order.
Thanks,
Rohini Haksar

Map or filter a field

Dears,
I have a BAPI based interface and I need to map or filter one field of its IDoc.
Is it possible to set a fixed value at BD64 transaction or any other transaction?
The external system sends the field with valid values and I need to change them to zero.
The BAPI used in the interface is standard so I was hoping that would be possible to change the value without changing the BAPI.
Interface: HR-PDC
Message Type: HRCC1UPTEVEN
Basic Type: HRCC1UPTEVEN01
Segment: E1BPCC1UPTEVEN
BAPI: Object PTMgrExtPExpenses, method Insert (Function HR_CC1_TIMEEVENT_POST).
Field: TIMEID_NO
Thanks in advance!
Best Regards.
Anaer Lima

"Not" is not yet implemented, but it is one of our top 10 requested features. So fear not, we'll be adding it. It's not the top item on the list, however, and it is not exactly inexpensive (as there are not just a few ways of using it). So I can not
yet provide an estimate regarding when it will show up.
But without a doubt, we won't be omitting no aspects of nothing except none of the features other than what we didn't implement for nobody. Not.
- Chris

COPA- How to seggregate when 2 condion type are mapped to one copa field

Hi,
I have a scenario, wherein 2 Billing condition records PDIF & PR00 mapped to one copa field.
Going forward, I can map each of them to different copa fields, then is their a way to correct past data?
These 2 condition records have diffrent billing types.
If I go to CE1XXXX table, I have an option to pull data according billing types.
CE4XXX Segment table being a higher level table, I can't extract data per billing type.
Realignment and Reorganizing copa data doens't seem to address the fix.
Looking for some good suggestions.
Thanks,
Parimala.

Hi,
From what I think, it is probably not possible and best not to correct the past data in this case. Technically, will you have any idea as to how to break this data, and based on what weightage, percentage or conditions? And how many years back are you going to correct the data?
I can suggest that you correct the data by reversing the old data out (by posting in opposite figures), put in the new mapping, and repost the data again. However, in this case, you'll lost the history of the posting and it will take a lot of time to identify the data and re-post.
It's best to use the mapping from a logic break onwards, such as going forward in a new fiscal year... it's probably going to cost a lot of effort in re-educating the users, and correcting the reports, but it might be more effective from IT point of view.
Hope this helps.
Cheers,
Gimmo

Mapping failure in Null fields passing

Similar Messages

Maybe you are looking for