MAPS connecting with Headset?
how can you connect the i phone 4 s app "MAPS" with the headset? I'd like to hear the navigation in the headset.
my headset is:
Nokia BH-102 Bluetooth Headset
Similar Messages
-
Btoes - connection with headsets problems!!
I installed the drivers and software for BToes 2.0 (3X Faster) and it paired with all my BT devices (SE K750i, Jabra headset and BTH headset). However, when I was using the BT headset as 'mic and headphone' for internet phone or MSN video conversation, the 'sound' is 'delayed'. It means that the other party has to wait a while to hear what I just said. Do you have any solution to this????
I also got MSI Tech Support email confirming that MSI Btoes DOES have problems working with BT v1.1 and v1.2 headset with a PC...I wonder if it could be your BT devices and not the phone. The iPhone 5 has BT v4 (iPhone 3 BT v2.0, iPhones 3G , 4 BT v2.1 and iPhone 4S BT v4) perhaps they can't handle the more sophistcated BT. My iPhone is a week old. I tested with my BT device which is a year old and has BT v2.0 with HFP, A2DP and AVRCP. It functions perfectly with the iPhone 5. None of the issues that are mentioned here effect it. Because of the complaints here I put it through all of the paces.
This is my device, which lets me use my favorite headphones, including the new Apple earpods.
http://www.cellularinnovations.com/product/12 -
MAP don´t login in the clients when the pcs don't connect with a domain
I have a network with a normal pcs (as home pcs) with out domain; but i try audit the network but always launch the same error "Failed - Access Denied". I read in the internet and this problem is present when the netlogon service is down , but
this service can't enable because this service only enable when the clients is connect with a domain controller. I need a solution. We have an ideas or solutions?
Thank You!!Inventorying workgroups can be difficult, especially when it comes to remote access and network security. Because workgroups are not centrally managed, some of the items discussed in this
wiki article on preparing your workgroup environment may require you to visit each machine individually.
For non-domain credentials, you do not use the <systemname>\<user> format, you simply enter the user name. Regarding how to enter the credentials, if you have an account that uses the same username and password on all machines and is an administrator
on all of those machines, then you can enter that in the All computers credentials page of the wizard. You can also do this if they are different user names. However, if some machines have an account with the same user name, such as Administrator,
but different passwords on each machine, you will need to use the Manually enter computer names discovery method, and then enter the information for each group or each machine.
As you can tell, workgroup environments can quickly negate any benefit that the agentless inventory nature of MAP provides.
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread. -
Headset (HS-23) connection with device (Nokia 6233...
Hi
From last couple of weeks my headset (HS-23) is not properly connecting with my device (Nokia 6233). Sometimes device shows headset icon but there is no sound in the headset at all. Sometimes sound came from only one of the ear piece, sometimesa sound comes from both of the ear piece but with a different volume level among them. It can be fixed for some of the time by just pushing/pulling the connection with device but not always. Also if this is fixed like this, this type of fix does not persist for long time e.g. problem again came in if the connection point is again moved/pushed/pulled by mistake.
Please help me what to do because of this mess its annyoing and disturbing the music listening experience.Just clean the pop-port on your phone and the contacts on the headset.
Use a cotton tip with a few drops of isopropyl alcohol on it but be careful not to bend the contacts on the headset.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you! -
Connection with bluetooth and headset
I have a problem
Since the softwareupdate i can't connect my bluetooth headset (from nokia, BH-218) to my phone , the nokia N8. If i push the botton "on" on my headset, i see only 1 second there is a connection with my phone. But after that second, there is no more connection with de headset to my phone.
What do i wrong?Hi yanonamie,
What is your Nokia model?
I would recommend to re-install the update of your Nokia software you have done via Nokia suite menu: tools>update.
Try a soft reset by using *#7780# code: 12345 this will restart the connectivity system without erasing your data.
Check if the energy saving mode doesn’t disconnect your Bluetooth. If this is the case, you can disable it.
Let me know how you get on so that I can troubleshoot further, if necessary.
regards,
Manududu3
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you! -
Connection with Q2 Smart BlueAnt Headset - No Answer
Please help! I'm having trouble receiving calls using my Q2 BlueAnt Smart Bluetooth Headset. I called the Q2 BlueAnt support center and they think there is a recent update pushed to my Black Berry that may have caused it to stop accepting calls. I'm able to pair the device and make outgoing calls, but when anyone calls me it terminates the call when I click on the MF (Multi-Function) key. The MF key is the one I push to accept calls or say voice commands. I'm one of several customers that have called BlueAnt with this same problem. The timeframe for this started last week or the week before. No other changes to the device or the phone since I purchased the phone the spring of 2010. The BlueAnt device is about 6 months old now. Thanks!
There's been quite a few posts about this. See here: http://www.xperiablog.net/2013/09/22/xperia-z1-suffering-with-headset-bug/
According to xda-developers, a new firmware update, .534 corrects the problem. See this thread: http://forum.xda-developers.com/showthread.php?t=2452250 -
Nokia Maps and Bluetooth Headset
Whenever I have my bluetooth headset connected and I'm using Nokia Maps (2 or 3) the volume for navigation keeps switching itself off.
It's not the volume on the headset as this works fine and I can make calls without the volume dropping.
I turned the volume up on my N96 and the next time I get voice directions by NM the sounds drops away again, pretty annoying.
I've re-installed NM maps a few times including the sound files just in case that was the problem and I now that I've moved to NM3 I was hoping the problem might have gone away....it hasn't.
Does this happen to anyone else? Anyone got a fix?
Oh and does anyone else think the Female (UK) voice in NM3 sounds fed up when giving directions?Hi,
I seem te have the same problem with N82 connecting to standard bleutooth peugeot carkit.
I raised a call with nokia buth they seem to not want to support because of third party. I hooked up an HTC S740 from my buddy this one works like a charm.
Looks like nokia is going into headset modes, see headset icon. Then all sound should go to headset. However my carkit supports also handsfree and it seems like the connection with my nokia keeps ending up in headset!
nokia please help, this has nothing to do with the carkit!
Kind regards Christian -
My Lumia 620 doesn't connect with the PC
When I use the USB cable for connection with the PC, he shows that there is a connection with a windowsphone, but he shows not any of the maps from my phone??
Does anyone know how I solve this problem.You won't see the map data files on your phone. The windowsphone OS compartmentalises all the apps and their data files for security reasons. All you will see are user files such as photos, videos, documents, etc. Map data can be managed using the Here Maps or Drive app on the phone.
-
Hi, I’ve recently bought an iPad2 and can’t get connected with AppStore or iTunes, when I tap on these icons a grey page pops up saying is loading but never opens the page, no failure message is displayed, it just keep saying is loading.
Apparently it is not an issue with wifi since Safari, You Tube and Maps work well, I’ve tried some of the tips, e.g. log off/on my Id, change password but no one worked.
Your help will be highly appreciated.
Thank you.
Luis.Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.
-
Cannot connect to local network while connected with EasyVPN
Hi All,
I'm looking on many forums for an answer, but I cannot get it working.
I have configured EasyVPN with CCP and also with CLI. I had it both working perfect, except the most important thing.
I can connect with the Cisco VPN client to the router, but i'm not able to connect or even ping a system inside the remote network. My laptop gets an IP address from the address pool of the router.
I really hope someone can help me before my manager is losing his patience :-)
Here is my config. (before someone is mentioning it, i have to clean up my config a bit...I mean, look at the acl's )
Current configuration : 13939 bytes
! Last configuration change at 12:26:53 UTC Thu Jan 9 2014 by admin
version 15.2
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
hostname Router
boot-start-marker
boot-end-marker
security authentication failure rate 3 log
security passwords min-length 6
logging buffered 10240
logging console critical
enable secret 4 ********
aaa new-model
aaa authentication login local_authen local
aaa authentication login ciscocp_vpn_xauth_ml_1 local
aaa authorization exec local_author local
aaa authorization network ciscocp_vpn_group_ml_1 local
aaa session-id common
no process cpu extended history
crypto pki trustpoint TP-self-signed-********
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-********
revocation-check none
rsakeypair TP-self-signed-********
crypto pki certificate chain TP-self-signed-********
certificate self-signed 01
3082022B 30820194 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 33303239 34303934 3438301E 170D3133 30343032 30353436
31345A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D33 30323934
30393434 3830819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100B9C3 F8E6BD43 3351D861 68398114 D31AACC1 CE16CDDA 7F0876BC 6E55EA3C
5F258D90 20FC882D 42C90257 92DB9113 B461DD81 4080153F 6AE041AD E5BDDF7E
7C21BD1B 35F05CCB F6D34A4D 6B04C309 F39D8426 865E2BFE 9E8051F2 6F411A49
D71FBF0C 1AC85BEE 355563FB 2353D0C7 28D49071 840AF99B AF59D768 FCDCDF03
94FF0203 010001A3 53305130 0F060355 1D130101 FF040530 030101FF 301F0603
551D2304 18301680 145ACD47 89D51095 70BE5400 595E826A 6A9E5E95 71301D06
03551D0E 04160414 5ACD4789 D5109570 BE540059 5E826A6A 9E5E9571 300D0609
2A864886 F70D0101 05050003 8181003B 1988FFCD 93112A99 707B7AD8 B56A08C0
C274B974 B076AA19 BAFCC868 F118AE7D 4D8A55E2 42D8F9A9 9D617093 7EF6D459
6BC0A990 BF5AF3E8 8E7F2787 41F4BFE2 65A1A3B0 D726033A 47A24D29 159ABF92
16DBCF5C EC6602C2 E6137C0B C1FC7125 37E9CE49 82B45E18 FAB31A36 990BB3BC
30D9EE8E 8B0A9F7C DC0B6C2B FA2740
quit
no ip source-route
ip cef
no ip bootp server
ip name-server ********
ip name-server ********
no ipv6 cef
parameter-map type protocol-info yahoo-servers
server name scs.msg.yahoo.com
server name scsa.msg.yahoo.com
server name scsb.msg.yahoo.com
server name scsc.msg.yahoo.com
server name scsd.msg.yahoo.com
server name cs16.msg.dcn.yahoo.com
server name cs19.msg.dcn.yahoo.com
server name cs42.msg.dcn.yahoo.com
server name cs53.msg.dcn.yahoo.com
server name cs54.msg.dcn.yahoo.com
server name ads1.vip.scd.yahoo.com
server name radio1.launch.vip.dal.yahoo.com
server name in1.msg.vip.re2.yahoo.com
server name data1.my.vip.sc5.yahoo.com
server name address1.pim.vip.mud.yahoo.com
server name edit.messenger.yahoo.com
server name messenger.yahoo.com
server name http.pager.yahoo.com
server name privacy.yahoo.com
server name csa.yahoo.com
server name csb.yahoo.com
server name csc.yahoo.com
parameter-map type protocol-info msn-servers
server name messenger.hotmail.com
server name gateway.messenger.hotmail.com
server name webmessenger.msn.com
parameter-map type protocol-info aol-servers
server name login.oscar.aol.com
server name toc.oscar.aol.com
server name oam-d09a.blue.aol.com
multilink bundle-name authenticated
license udi pid C3900-SPE100/K9 sn ********
username admin privilege 15 secret 4 ********
username guido privilege 15 secret 4 ********
redundancy
ip tcp synwait-time 10
ip ssh time-out 60
ip ssh authentication-retries 2
class-map type inspect imap match-any ccp-app-imap
match invalid-command
class-map type inspect match-any ccp-cls-protocol-p2p
match protocol edonkey signature
match protocol gnutella signature
match protocol kazaa2 signature
match protocol fasttrack signature
match protocol bittorrent signature
class-map type inspect match-all sdm-nat-http-1
match access-group 101
match protocol http
class-map type inspect match-all sdm-nat-user-protocol--1-2
match access-group 102
class-map type inspect match-all sdm-nat-user-protocol--1-1
match access-group 101
class-map type inspect smtp match-any ccp-app-smtp
match data-length gt 5000000
class-map type inspect match-any ccp-skinny-inspect
match protocol skinny
class-map type inspect match-any ccp-h323nxg-inspect
match protocol h323-nxg
class-map type inspect match-any ccp-cls-icmp-access
match protocol icmp
match protocol tcp
match protocol udp
class-map type inspect match-any ccp-cls-protocol-im
match protocol ymsgr yahoo-servers
match protocol msnmsgr msn-servers
match protocol aol aol-servers
class-map type inspect match-all ccp-protocol-pop3
match protocol pop3
class-map type inspect match-any ccp-h225ras-inspect
match protocol h225ras
class-map type inspect match-any ccp-h323annexe-inspect
match protocol h323-annexe
class-map type inspect match-any ccp-cls-insp-traffic
match protocol pptp
match protocol dns
match protocol https
match protocol icmp
match protocol imap
match protocol pop3
match protocol tcp
match protocol udp
class-map type inspect pop3 match-any ccp-app-pop3
match invalid-command
class-map type inspect match-all SDM_GRE
match access-group name SDM_GRE
class-map type inspect match-any ccp-h323-inspect
match protocol h323
class-map type inspect match-all ccp-invalid-src
match access-group 100
class-map type inspect match-any ccp-sip-inspect
match protocol sip
class-map type inspect match-all ccp-protocol-imap
match protocol imap
class-map type inspect match-all sdm-nat-https-1
match access-group 101
match protocol https
class-map type inspect match-all ccp-protocol-smtp
match protocol smtp
class-map type inspect match-all ccp-protocol-http
match protocol http
class-map type inspect match-any CCP_PPTP
match class-map SDM_GRE
class-map type inspect match-all ccp-insp-traffic
match class-map ccp-cls-insp-traffic
class-map type inspect match-all ccp-protocol-p2p
match class-map ccp-cls-protocol-p2p
class-map type inspect match-all ccp-protocol-im
match class-map ccp-cls-protocol-im
class-map type inspect match-all ccp-icmp-access
match class-map ccp-cls-icmp-access
policy-map type inspect pop3 ccp-action-pop3
class type inspect pop3 ccp-app-pop3
log
reset
policy-map type inspect smtp ccp-action-smtp
class type inspect smtp ccp-app-smtp
reset
policy-map type inspect ccp-pol-outToIn
class type inspect ccp-protocol-http
inspect
class type inspect CCP_PPTP
pass
class type inspect sdm-nat-http-1
inspect
class type inspect sdm-nat-https-1
inspect
class type inspect sdm-nat-user-protocol--1-1
inspect
class type inspect sdm-nat-user-protocol--1-2
inspect
class class-default
drop log
policy-map type inspect imap ccp-action-imap
class type inspect imap ccp-app-imap
log
reset
policy-map type inspect ccp-inspect
class type inspect ccp-invalid-src
drop log
class type inspect ccp-protocol-http
inspect
class type inspect ccp-protocol-smtp
inspect
service-policy smtp ccp-action-smtp
class type inspect ccp-protocol-imap
inspect
service-policy imap ccp-action-imap
class type inspect ccp-protocol-pop3
inspect
service-policy pop3 ccp-action-pop3
class type inspect ccp-protocol-p2p
drop log
class type inspect ccp-protocol-im
drop log
class type inspect ccp-insp-traffic
inspect
class type inspect ccp-sip-inspect
inspect
class type inspect ccp-h323-inspect
inspect
class type inspect ccp-h323annexe-inspect
inspect
class type inspect ccp-h225ras-inspect
inspect
class type inspect ccp-h323nxg-inspect
inspect
class type inspect ccp-skinny-inspect
inspect
class class-default
drop
policy-map type inspect ccp-permit
class class-default
pass
policy-map type inspect ccp-permit-icmpreply
class type inspect ccp-icmp-access
inspect
class class-default
pass
zone security in-zone
zone security out-zone
zone-pair security ccp-zp-self-out source self destination out-zone
service-policy type inspect ccp-permit-icmpreply
zone-pair security ccp-zp-in-out source in-zone destination out-zone
service-policy type inspect ccp-inspect
zone-pair security ccp-zp-out-self source out-zone destination self
service-policy type inspect ccp-permit
zone-pair security ccp-zp-out-zone-To-in-zone source out-zone destination in-zone
service-policy type inspect ccp-pol-outToIn
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group jmgvpn
key ****
pool SDM_POOL_1
include-local-lan
max-users 10
netmask 255.255.255.0
crypto isakmp profile ciscocp-ike-profile-1
match identity group jmgvpn
client authentication list ciscocp_vpn_xauth_ml_1
isakmp authorization list ciscocp_vpn_group_ml_1
client configuration address respond
virtual-template 1
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
mode tunnel
crypto ipsec profile CiscoCP_Profile1
set transform-set ESP-3DES-SHA
set isakmp-profile ciscocp-ike-profile-1
interface Null0
no ip unreachables
interface Embedded-Service-Engine0/0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
shutdown
interface GigabitEthernet0/0
description JMG$FW_INSIDE$
ip address 10.0.14.*** 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly in
zone-member security in-zone
glbp 10 ip 10.0.14.***
glbp 10 authentication text JMG
glbp 10 forwarder preempt delay minimum 100
duplex auto
speed auto
no mop enabled
interface GigabitEthernet0/1
description Cloud$ETH-LAN$$FW_INSIDE$
ip address 10.3.15.*** 255.255.255.252
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
zone-member security in-zone
duplex auto
speed auto
no mop enabled
interface GigabitEthernet0/2
description Internet (Only in use on R01)$FW_OUTSIDE$$ETH-WAN$
ip address 46.144.***.*** 255.255.255.240
no ip redirects
no ip proxy-arp
ip verify unicast reverse-path
ip flow ingress
ip flow egress
ip nat outside
ip virtual-reassembly in
zone-member security out-zone
duplex auto
speed auto
media-type rj45
no mop enabled
interface Virtual-Template1 type tunnel
ip unnumbered GigabitEthernet0/0
tunnel mode ipsec ipv4
tunnel protection ipsec profile CiscoCP_Profile1
ip local pool SDM_POOL_1 192.168.1.1 192.168.1.10
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list 10 interface GigabitEthernet0/2 overload
ip nat inside source list 11 interface GigabitEthernet0/2 overload
ip nat inside source static tcp 10.0.14.*** 443 interface GigabitEthernet0/2 443
ip nat inside source static tcp 10.0.14.*** 80 interface GigabitEthernet0/2 80
ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/2 permanent
ip route 10.0.0.0 255.0.0.0 GigabitEthernet0/1 permanent
ip route 10.1.14.*** 255.255.255.0 10.0.14.*** permanent
ip access-list extended SDM_GRE
remark CCP_ACL Category=1
permit gre any any
logging trap debugging
access-list 1 remark HTTP Access-class list
access-list 1 remark CCP_ACL Category=1
access-list 1 permit 10.3.15.24 0.0.0.3
access-list 1 permit 10.0.14.0 0.0.0.255
access-list 1 deny any
access-list 3 remark CCP_ACL Category=2
access-list 3 permit 10.5.14.0 0.0.0.255
access-list 3 permit 10.0.14.0 0.0.0.255
access-list 5 remark CCP_ACL Category=2
access-list 5 permit 10.0.14.0 0.0.0.255
access-list 6 remark CCP_ACL Category=2
access-list 6 permit 10.0.14.0 0.0.0.255
access-list 7 remark CCP_ACL Category=2
access-list 7 permit 10.0.14.0 0.0.0.255
access-list 8 remark CCP_ACL Category=2
access-list 8 permit 10.0.14.0 0.0.0.255
access-list 9 remark CCP_ACL Category=2
access-list 9 permit 10.0.14.0 0.0.0.255
access-list 10 remark CCP_ACL Category=2
access-list 10 permit 10.0.14.0 0.0.0.255
access-list 11 remark CCP_ACL Category=2
access-list 11 permit 10.0.14.0 0.0.0.255
access-list 100 remark CCP_ACL Category=128
access-list 100 permit ip host 255.255.255.255 any
access-list 100 permit ip 127.0.0.0 0.255.255.255 any
access-list 100 permit ip 192.168.253.0 0.0.0.255 any
access-list 101 remark CCP_ACL Category=0
access-list 101 permit ip any host 10.0.14.153
access-list 102 remark CCP_ACL Category=0
access-list 102 permit ip any host 10.0.14.173
no cdp run
control-plane
banner login ^CCCPlease login. Or leave if you have no right to be here.^C
line con 0
login authentication local_authen
transport output telnet
line aux 0
login authentication local_authen
transport output telnet
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
access-class 23 in
authorization exec local_author
login authentication local_authen
transport input telnet ssh
line vty 5 15
access-class 23 in
authorization exec local_author
login authentication local_authen
transport input telnet ssh
scheduler allocate 20000 1000
scheduler interval 500
endRemove the ip nat outside command for a moment during a permitted downtime.
I have a feeling you should do some NAT excemption for the VPN traffic (deny vpn traffic for nat policies). -
Problem in establishing connection with mysql 5.0
Hi,
I am using JCAPS 5.1. I tried to insert data to mysql database table.
But i got following error
java.sql.SQLException: Error in allocating a connection. Cause:
Physical Connection doesn't exist.
My intention is to read file in which data are comma seperated and to
populate those values to a mysql 5.0 database table.
Sample DATA in file [test.txt]
111,gg,23,MFG
112,hh,24,MFG
113,ii,25,RETAIL
114,jj,26,IT
Database table: employee
eno,ename,eage,edept
While creating JDBC OTD there is no problem in establishing connection with database. But after deploying i got above error.
I have used Mysql 5.0 Connector/J JDBC driver. Added JDBC driver jar files to following directories as required.
1) C:\JavaCAPS51\logicalhost\is\lib
2)C:\JavaCAPS51\logicalhost\is\domains\test\lib
Steps i have followed as per JDBC-ODBC -eway user guide doc.
1) Created USerDefined OTD and added necessary fields
2) Created JDBC OTD.
3) Created JAVA collaboration and do business process for inserting
4) Mapped all components by creating in Connectivity MAp
5) created necessary external systems in envrionment explorer.[JDBC External System and File External System]
6)Created Deployment profile
5) Deployed it.
After deploying it gives error as
java.sql.SQLException: Error in allocating a connection. Cause: Physical Connection doesn't exist
Please let me know the solution for problem.
Message was edited by:
VenkateshSampoornamIn the environment definition,
-> External Application JDBC
-> Properties
-> Outbound JDBC Connection
You have the database URL in the "DriverProperties" field
Valid URL would be : jdbc:mysql://localhost:3306/caps
!! The doc says that this field is optional !! Seems to be an error in the doc:
Hope this helps
Seb -
Exchange Server 2013 // MFCMAPI could connect with errors
While connecting with Exchange Server 2013 I have started facing problem with my application.
My application fails to connect to Exchange with below parameters, then i have tried using MFCMAPI to if everything is okay. MFCMAPI could connect with above errors.
And I have tried with program using below parameters, i still get network error from MAPI call. Can you kindly help, I can provide any additional
details needed.
___ props[prop_count].ulPropTag = PR_PROFILE_UNRESOLVED_NAME;
props[prop_count].Value.lpszA = <ProfileUnresolvedName>;
prop_count++;
props[prop_count].ulPropTag = PR_PROFILE_UNRESOLVED_SERVER;
props[prop_count].Value.lpszA = <[email protected]>;
prop_count++;
// Setting this to TRUE causes OpenMsgStore() to fail with MAPI_E_UNCONFIGURED
props[prop_count].ulPropTag = PR_CONVERSION_PROHIBITED;
props[prop_count].Value.b = FALSE;
prop_count++;
props[prop_count].ulPropTag = PR_PROFILE_CONFIG_FLAGS;
props[prop_count].Value.l = CONFIG_SERVICE /*| CONFIG_PROMPT_FOR_CREDENTIALS
| CONFIG_SHOW_CONNECT_UI */;
prop_count++;
props[prop_count].ulPropTag = PR_DISPLAY_NAME;
props[prop_count].Value.lpszA = <Mailbox Profile Name>;
prop_count++;
//Above setting used to be sufficient to connect using RPC
//Below parameters added to connect via HTTPS
LPSTR pwszUser = "domain\\username"; //also tried
[email protected] AND username
LPWSTR pwszPassword = L"paswword"; // Password has been encrypted using CryptProtectData
props[prop_count].ulPropTag = PR_PROFILE_RPC_PROXY_SERVER_W;
props[prop_count].Value.lpszW = L"https://ProxyHostname.domain";
prop_count++;
props[prop_count].ulPropTag = PR_PROFILE_RPC_PROXY_SERVER_AUTH_PACKAGE;
props[prop_count].Value.l = RPC_C_AUTHN_NONE; // RPC_C_HTTP_AUTHN_SCHEME_NTLM,
RPC_C_HTTP_AUTHN_SCHEME_BASIC
prop_count++;
props[prop_count].ulPropTag = PR_PROFILE_RPC_PROXY_SERVER_FLAGS;
props[prop_count].Value.l = PRXF_ENABLED | PRXF_SSL;// | PRXF_IGNORE_SEC_WARNING; // | PRXF_IGNORE_SEC_WARNING;
prop_count++;
props[prop_count].ulPropTag = PR_PROFILE_RPC_PROXY_SERVER_PRINCIPAL_W;
props[prop_count].Value.lpszW = L"msstd:certificateserverhostname.domain";
prop_count++;
props[prop_count].ulPropTag = PR_PROFILE_AUTH_PACKAGE;
props[prop_count].Value.l = RPC_C_AUTHN_GSS_NEGOTIATE;
// RPC_C_AUTHN_WINNT, RPC_C_AUTHN_GSS_NEGOTIATE, RPC_C_AUTHN_NONE
prop_count++;
props[prop_count].ulPropTag = PR_PROFILE_AUTH_USER_W;
props[prop_count].Value.lpszA = pwszUser;
prop_count++;
props[prop_count].ulPropTag = PR_PROFILE_AUTH_PASSWORD;
props[prop_count].Value.bin.lpb = dataBlobOut.pbData;
props[prop_count].Value.bin.cb = dataBlobOut.cbData;
prop_count++;
DB( (DB_PR _T("ConfigureExchangeService() About to configureMsgService\r\n"),
this ) );
hres = lpServiceAdmin->ConfigureMsgService( exchUID, 0, config_flags, prop_count, props
I still get MAPI_E_NETWORK not found
Are there any configuration changes need to be done on Exchange Server?
Is there any mistake in above parameters?
Kindly suggest.You can refer Dave's blog post @
http://blogs.msdn.com/b/dvespa/archive/2013/05/21/how-to-mfcmapi-create-mapi-profile-exchange-2013.aspx
DeVa, M.S., {MSFT} Please remember to mark the replies as answers if they help -
How do I connect my headset (split mic/headphone input) to my MacBook Pro Core 2 Duo? I can't get it to work, but did previously at one point. Trying to use it with Rosetta Stone and I cant get it to recognize my speech at all, says the headset isnt plugged in. Went to setting and made sure it was on line in and it is not registering their either. Help!
Use something like this:
http://www.buy.com/prod/gtmax-usb-2-0-to-3-5mm-microphone-speaker-audio-sound-ca rd-adapter/q/sellerid/29345858/loc/111/213812694.html -
Port Mapping problem with a Snow Base Station
I wish to enable port mapping with my Airport Snow Base Station. (SBS) I am using an Earthlink Efficient Stream 5667 DSL modem to my SBS. I am running firmware version 4.0.9 and connecting with 10.4.3.
So -- enabling port mapping requires that the IP address on my 10.4.3 computer doesn't change, and that I then map the ports. However, I can not manually assign an IP (say 10.0.1.201) as my 10.4.3 can not connect using either "DHCP with manual address" or "manually" (where the router and subnet mask match the DHCP assignment)
What should I do?Do not use the "DHCP with manual IP address" - that is a mode not supported by most networking devices on the market.
What you should do: on your Mac, open System Preferences->Network->Show Airport->TCP/IP tab. Select to "configure manually". Then enter the following parameters:
- IP address: 10.0.1.201
- subnet mask: 255.255.255.0
- router/gateway IP: 10.0.1.1
- DNS IP: use either 10.0.1.1, or enter the actual IP address(es) of your ISP's domain name servers -
RFC Lookup's in message mapping fail with RuntimeException for no reason
Hi guys,
We have developed interfaces that execute a lot of RFC's from Message Mapping, by making use of RFC Lookup API.
In ID, in the corresponding RFC Receiver Communication Channel we have set the number of maximum connections to 100.
However, when a big number of Idocs with lots of items is sent to XI some messages fail in XI because mapping fails with a runtime exception that is not correct, since there is a return value found from the execution of the RFC function. And when I am testing the mapping in Test mode of XI IR, the mapping is executed successfully.
Do you think that by increasing the maximum number of connections in Communication Channel, it will take effect?
EvaggelosHi Evaggelos,
DECREASE, may be til 10.
Regards,
Udo
Maybe you are looking for
-
ITunes not finding music files
iTunes cannot find 90%+ of my music files. I manually linked them together over the last weekend (yucch) and today when I went into iTunes, the links were all broken even though the .mp3 files were in the same directories as before. I can manually fi
-
Do I Really need to render this much all the time????
I just upgraded from a G4 to a MacBook Pro. I am using FC 5.0 HD. I decided to use the Offline RT Photo Jpeg option to capture all my footage and edit on my MacBook. I figured I could render faster and store a lot more footage on the go. Trouble is w
-
Customization of VO.xml files
Hi, I have an issue with JDeveloper (Studio Edition Version 11.1.1.6.4) when I try to customize VO.xml files (I try on PersonNameGlobalVO.xml and PersonSearchVO.xml). From the "Overview" view, I try to add an attribute and modify a view criteria but
-
Clear inspection lot for defect items
Hi All, What is the process if i found the inspection lot have defect how do i create the notification .and result. after moved it to blocked stock. how can i close the nodification and change the result and do the ud for the lot.
-
Print jobs stopping for no reason
Hi, For some reason print jobs simply stop when sent to server print queues. The client queue shows "Connecting to 192.168.1.201 at port 631..." when the job is sent, then it halts & the job sits in the queue. I've tried recreating the queues by dele