Marker spacing (bug?)

I have a program that periodically gets updated with different z scale intensity graph max and min values (which are used to establish the range of a color table) .  I want the user to have the option of specifying the number of marker intervals but I seem to have run into a bit of a bug.  As it turns out, "uniform marker spacing" is not in fact uniform if the scale goes into the negative range.  It seems that the scale must always increment with respect to the 0 marker regardless of where i specify the start range property to be.  
Case in point, look at the VI I've attached.  I have a scale from - 100 to 100, and I try to divide it into 5 even intervals. Ideally, the scale markers would just read 100, 60, 20, -20, 60, 100.  Instead, because it chooses to always use 0 as the increment reference, it reads 100 80, 40, 0, 40, 80, -100.  Does anyone know of a way around this?
Solved!
Go to Solution.
Attachments:
marker interval bug.vi ‏15 KB

I haven't tested the following theory:
A scale has 5 properties: Min, Max, Major Increment, Minor Increment, Start.
I think that the Start will allways be at a marker value, so I think that changing the Start to 'Min' will get you where you want.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Similar Messages

  • Slide Marker spacing limits-need help quick

    I have to have this project ready today. pls help.
    I imported 90 slides. They are set at the default transistion of 4 seconds. I inserted various dissolves and other transistions into them, thus the display time is somewhere around 2:19 seconds per slide. (This I assume, allows for the head and tail of the transistion). Set to "fit to music". I have a seven minute track. It plays through the simulator just fine. When I try to burn a disc, I get an error message " the marker spacing must be at least 4 seconds".
    What markers? Does the program set a marker at each slide? How do I get around this? According to the manual, your supposed to be able to use at least 99 slides. There is no reference to the markers and error message anywhere in the documentation.
    DVDSP 4
    Final cut suite 5 Universal
    Intel mac

    A slideshow in DVDSP is really just a fancy track. Each slide on this track is seperated by a chapter marker to allow the user to skip through the photos. Per DVD spec a chapter marker cannot be located less that .4 seconds from the end of a given track. Possibly for some reason, DVDSP thinks there should be a marker somewhere near then end of one of your tracks or slideshows.
    The ability to convert a slideshow to a track has several advantages including adding subtitles, alternate language streams and the ability to combine moving video with slides. It will also let you see all the chapter markers and if one is causing a problem.

  • Set Marker Color Bug

    I was relieved after much digging to find you can make a keyboard shortcut to make a marker of a specific color with just one click.  As opposed to making a marker and then going back to it to change its color.
    However for some reason when using this while playing a clip, this only works in a timeline, or on a video clip.  When I use the same command on an audio only file, i.e. music cue.  It just creates a marker of the default color 1.  - This is only when playing the clip.  If you park the playhead it works as expected no mater what the clip is.
    I'm frustrated, because the main reason I needed this feature was to tap out the beats in music for easier editing while I listen to the music cue (in real time).  I like to use color 1 for each beat in the 4-4 measure, and on the fourth measure tap out a new color so i can see where it repeats.. that way I can easily cut from color 2 to color 2 almost anywhere in the song seamlessly.  Sometimes I choose a third color when the melody loops so I know I can smoothly truncate a song with little to no effort.
    I noticed after the fact I can jump back to the marker and change it's color with the tool.. it just won't do it on an audio file while it's playing.
    Is this just a bug?  Just a bug on my system? Is it an intentional workflow on Adobe's part for some reason?  Anyone else having this problem?
    To map it open up keyboard shortcuts and sift for "set marker color"

    Yes, I know it. But if I set attribute values on my page, everything is right. If I set it from code, there is an error.
    I think that it is a bug, because component, for which I set attribute, has client id like: UIDataId:rowIndex:componentId. I set value to component on the third row, and have this value on components on the third and the fifth row.
    To tell the truth, I am sure, that it is a bug. If it is not so, please tell me, how an I set attribute value to component, which I need. Is there any way? I think, no. And it is a bug.

  • Typographically correct apostrophes and quotation marks? Bug?

    I am using the trial of Pages '08 (3.0) on a German Mac OS-X 10.4.10. Typographic quotation marks are switched on.
    Apostrophe:
    Whenever I type a phrase in English with an apostrophe, for instance the word "Let's" it uses a left single quotation mark (‘) instead of the right single quotation mark.
    Quotation marks and languages:
    Likewise, with typographic quotation marks set in the program settings, Pages uses the German quotation marks (which look like this: „word‟) although the text language is set to English. This behaviour occurs with English and English, GB. In Word this behaviour changes with the text language setting.
    I am a recent switcher, so maybe a solution to this problem is already known. If not, should I report this as a bug via feedback?

    Ian, yes, that would be Smart Quotes in English.
    You not being able to get German quotation marks in English would seem to be the same problem. I guess this is a bug then (or a missing feature) as I would expect this to change with each language (e.g. French has guillemots etc.).
    Would perhaps having several keyboard input setup in OS-X help here?
    Thanks for the link to Tom Gewecke's page. Tom, I'd be interested to hear of any other good recommendations. Are NeoOffice/OpenOffice good in this respect? Word compatibility and the ability to track changes is a must for me (as client's work with Office), but I'd rather invest in Microsoft Office when the new Universal version becomes available? I like the more simplified interface of Pages, which is why I'm trying the new version out via the trial.

  • If I hit enter to go to a new line it's double spaced(BUG)

    if I hit enter to go to a new line it's double spaced even thought it's set to single space.
    in the inspector "T" the "LINE" says 1 and single. I can change the line spacing to look like 1 by sliding it down to 0.01 to look like 1 of single but that's pretty tedious.
    So it's a bug yeah?
    The part that's messed up was add in from notes app which is the problem I'm guessing. Still it's a bug.
    I've tried copying into a new pages doc and still no go.
    Anyway ideas around this bug?
    thanks

    Probably just had an extra return at the end of paragraph, which is a common style in Notes.
    Peter

  • Go to Next/Previous Marker shortcut bug in Premiere Pro 2014

    The keyboard shortcuts Shift+M and Ctrl+Shift+M to move to markers takes you to the next edit point or marker, whichever comes first.
    I  found that using the shortcuts to navigate to the next Marker in the timeline will take you to the next Marker or Edit point, not to the next Marker as it does in Premiere Pro CC.
    If I have missed something, I would love to know. Otherwise, this seems to be a bug in the new software.

    Hi Kevin,
    Thank you very much for your response. I now can see what I was doing wrong.
    I have markers on the timeline. I had forgotten that I had also put some markers on my audio file.
    As a result, each time I wanted to go to the next marker, of course, it went to the timeline or clip marker, whichever came first.
    I have never made this mistake before.  Very embarrassed and sorry to waste anyone's time. I, at least, have now learnt something about working with markers that I didn't know.
    Thanks for helping me out,
    Thornie

  • Section Marker Spacing

    I'm in InDesign CS4 on a Mac - I've created text based Section Markers for a book and for some weird reason there is no spacing between the words for each Section Marker "Title".  There are spaces for each title when I entered them in the "Numbering and Section Options" menu so I'm slightly confused.
    ie:
    This is what I get: ThisIsTheTitle
    This is what I want: This Is The Title
    Any suggestions?

    I've noticed this, too. If the section marker is used on a master page the text shows up as "Section", when it picks up compresses to fit on a single line, so if the text box isn't wide enough to fit the text, it compresses it to fit on a single line. (The word and letter spacing is ignored). Like so:

  • Horizontal Menu Bar Spacing Bug?

    I created a horizontal menu bar. Chose Uniform Spacing from the blue fly-out menu.
    After adding a another couple of pages, the menu spacing failed to update—the menu now looked cramped in places.
    I had to go back to the Master Page and choose Uniform Size, and then Uniform Spacing in order for the menu to update correctly.
    Using Muse CC ver. 7.1.

    thanks, beth
    i'm the kind, probably such as your self, as well, that tends to blur a little in and out of reality !
    i too, leave things like js and php to those who like it, and concentrate on design - other than knowing enough to do things like changing the delay time in the js for the spry dropdown
    thanks for your invitation and i will do so as time permits
    as a small attempt at returning the favor, i was going to pose another problem to you when i found the solution, and so instead i will offer you the solution - you may well already have it, but just in case:
    i noticed (or rather the client noticed, but i've seen it before!) that a small dotted rectangle appears onclick on the spry links in firefox and ie, but not in safari
    the solution is to place onfocus="blur()" within - and at the end - of the a href tag like this:
    if you knew this, please ignore my attempt - if you didn't, well then . . .there ya go!
    perry
    Perry Yeldham
    www.21thirteen.com
    website design and development

  • Vertical spacing bug in IE?

    I'm having a rendering problem I can't track down in my code,
    and it
    shows up in IE7 but not Firefox. I'm getting extra vertical
    space on
    some <p>s that are nested within a few divs and tds;
    I'm thinking that
    it's extra top or bottom margin or padding. The <p>s
    are affected by
    various selectors, including id and class selectors, as well
    as
    descendant and sequential selectors.
    Are there any known IE7 bugs that might be causing my
    problem?
    Thanks!
    -Kim

    I'm not an code expert. But what I do is look at the code
    carefuly of an area that works and compare it to one that doesn't.
    Some times DW positions the <class> or <span>
    attributes in a different order. Its both irritating and time
    consuming but it can make a difference in the way it shows up on
    the browser.

  • LT41 - Group TR - Not possible to mark items (bug?)

    Hi,
    transaction LT41 can be used to group together TR under one group number. This can later be used to create TOs, print TOs and confirm TOs for this group number.
    When calling LT41 I can see the open TRs sorted by movement type. But I cannot select any items, "Select all" does not work and the column "Selectd" is not ready for input.
    Transaction LT43 (group deliveries) works fine. I have the same problem while testing on the IDES system (ECC5).
    I could not find any notes related to this topic.
    Cheers
    Mathias

    Not a bug, it is just not possible to select TR if transfer type is "*". This makes sense as it is only possible to create TO for a specific transfer type.
    If only one of the following is selected for the transfer type everything works fine.
    A     Pick
    E     Putaway
    U     Posting chge
    X     Whse superv.

  • Paragraph Spacing Bug?

    Whenever I open a fla in CS5, any classic text paragraph spacing that was a negative value is set to 0.  Has anyone else experienced this?
    My version is 11.0.2.489.

    It happened at http://community.skype.com/t5/Windows-desktop-client/How-do-I-get-rid-of-home-profile-call-area-on-r... yesterday immediately after accepting the answer. It also persisted on page reload after editing the answer post.
    But it no longer seems to be the case there, which is weird, unless somebody changed something.
    The next time it happens I will grab a screenshot and a link and some more details about the css. I should have the first time but I didn't think it was going to be a transient issue.
    Was using Chrome 43 on Windows 7.

  • Dmenu2 xft-font blank width spacing bug?

    Hi,
    if I launch dmenu2 with an xft-font specified (via `-fn 'Monospace-13'` for example), I experience the following:
    When I type something, every blank after a letter is incredibly narrow or worse just invisible. This only affects the blanks directly after a letter or if the first character is a blank anyway; the following blanks now just have the normal width.
    Can someone confirm this issue? (To reproduce, just launch dmenu2 with an xft-font specified and hit space several times or try write letters/words with blanks in between)
    Thanks!

    Sorry for bumping, but aren't there really any dmenu2 users around who are willing to invest a couple of seconds to tell me wether this is actually a bug or a classic pebkac? I simply don't want to annoy the developper straightaway if it's just me making ridiculous mistakes...

  • Bugs in Spry 1.6.1 menu bar widget affect performance in IE6

    The Spry 1.6.1 menu bar widget has bugs that result in the showSubmenu and hideSubmenu methods being called more times than necessary.  This is especially noticable in IE6 because multiple iframes are then created and deleted on every menu bar mouseover event, which makes the menu bar display slow and jerky.
    Two of the bugs are incorrect references when checking whether a submenu is visible before calling showSubmenu/hideSubmenu, and the other three are places that I think also need checks for whether a submenu is visible before calling hideSubmenu.
    I've attached a "SpryMenuBar-fixed.js" file that fixes those bugs.  All changes are marked with "BUG FIX", and I left the previous code commented out for reference.

    I have systematically reviewed the tutorial of David Powers on the Spry Menu bar 2.0, and recreated the process in a methodical process - making one change at a time, and then checking each step on a cross browser testing server, and have found, quite to my amazement that what seems to be causing the problem of the "gap" in IE 6 is by removing the customized styles from the head of the individual pages, and placing them in CSS stylesheet that governs the entire site.
    I find this quite inexplicable.  When the customized CSS rules governing the menu bar are situated in a separate stylesheet, the page renders well enough for any of the "modern" browsers, but won't render in IE 6.  All that I get is a horizontal menu with drop downs, but none of the styling (specifically background colours, background images, etc.) that are called for in the stylesheet and that otherwise appear when rendered by other browsers.
    I realize that this sounds strange, but I was wondering if anyone had experienced this phenomenon, or could offer any explanation.
    Any suggestions would be greatly appreciated.
    Steve Webster

  • IOS Music app: Album and Artist bugs

    My iPod touch (5th generation, iOS 7.1.1) has several bugs in its Music app. Here is how I was able to reproduce the bugs.
    Go to the Artists view.
    Select an artist from an album with multiple artists. (Example album: The Lego Movie; example artist: Will Arnett)
    Go to the Albums view.
    Select the same album from step 2.
    BUG 1: The album only shows the song by that artist. I should see all songs on the album. In addition, the duration of all songs in the album is limited to the song I see, rather than all songs on the album. (When connected to the Internet, "Show Complete Album" appears. [Screenshot] Tapping it invites me to download all of the other songs in the album, which I already have.)
    Go to the Artists view.
    Select another artist from the same album from step 2. (Example artist 2: Mark Mothersbaugh)
    BUG 2: I only see songs by the artist in step 2, rather than songs by the artist I selected. [Screenshot]
    Go to the Albums view.
    Close and re-start the iOS Music app.
    Select the same album from step 2. I see all of the album's songs again.
    Go to the Artists view.
    Select an artist from the same album as in step 2.
    BUG 3: I see the entire album, rather than just the songs by the selected artist. In addition, the artist at the top of the screen is the artist of the first song in the album. [Screenshot]
    Can anyone else confirm this bug? Also, what is the best way to report this bug to Apple?

    Unfortunately, the 15-minute edit deadline on my original post passed, so I need to make the following correction here:
    "Can anyone else confirm this bug? Also, what is the best way to report this bug to Apple?"
    should be
    "Can anyone else confirm these bugs? Also, what is the best way to report these bugs to Apple?"

  • How to change colors in Color Ramps

    Hello,
    I would like to use Color Ramps, and I need to change colors. In help documents, it say that I juste have to right click in the icon and change what I want. But I tried all option and I can't do anything I want.
    Can you help me ??
    Thanks
    David

    Seems that I'm not the only one to have problems with color ramps...
    Nearly everything was explained in the on-line help. Nearly...
    "Complete the following steps to change the colors of a color ramp.
    1. Right-click the color ramp or a marker and select Marker Spacing»Arbitrary from the shortcut menu to switch the color ramp to arbitrary marker spacing.
    2. Use the Operating or Positioning tools to right-click the marker next to the color ramp and select Marker Color from the shortcut menu to change the color associated with a marker.
    3. Select the color you want from the color picker that appears."
    Additionnal hints :
    After switching to arbitrary marker spacing, suppress all intermediate markers (right click> Delete). Then adjust the colors of th
    e two remaining end markers. With some ramps, you will be obliged to move slighty the marker position to get a color update.
    If you need to insert intermediate colors, add intermediate markers (right click > Add). Using the text tool, type in the exact value associated with the marker. Select the color you want to associate with the marker.
    When finished, switch back to uniform marker spacing.
    Have fun...
    CC
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        

Maybe you are looking for