Mask control point 'HUD' type info-can it be disabled when editing points?

I find that the control point info often obscures crucial parts of the image that I'm trying to mask, so it would be helpful to disable this info.
I've tried toggling various overlay options in the view menu but no luck as yet. Any ideas? Thanks

No, you cannot. And thank you. I thought I was the only one who was bothered by that little tool tip. I've never found a way to shut it off.
The only real think you can do is zoom in closer until it doesn't obscure what you're trying to see. For masking operations, I've become very adept at using the zoom tool (Z). Click and drag right to zoom in, left to zoom out, then just hit the tab key to go back to your regular selection tool. Works great for masks and other precision work.
Andy

Similar Messages

How to create a numeric control (of any type) that can ONLY be increased or decreased by one 'unit' at a time?

As in the title. I wish to create a numeric control (no current limitations on its type) with a range of 1-10 (and a step of 1). The only difficulty I'm having is that the user must only be able to increase or decrease it by 1 at any time. The code initiated by this value change must have completed at least once before the value can be changed again. This is because the VI's code is mostly contained in a while loop, and the control is read once every iteration and its last value must not differ by more than 1.
Is this possible with LabVIEW 6.1 and if so, how?
One of the solutions I've come up with so far is to disable the control immediately after it's read, and to enable it again immediately before it's read for the next time (I have to assume that the user is unable to click twice before the control is disabled). Is this an acceptable method or is there a better way?
I also had an idea of partially disabling a normal numeric control such that it could not be typed in - only the arrows remained operational. However, i don't know quite how to do this.
James
Never say "Oops." Always say "Ah, interesting!"
Solved!
Go to Solution.

Yes, i realize my solution needs the idea that followed it to be feasable in order to work properly. My bad!
I did wonder about using a combination like that, but I hoped it could all be done with one object. Ah well - just means adding an extra little bit of code. No probs.
Thank you anyway.
Never say "Oops." Always say "Ah, interesting!"

Rendering & Playback issues + can't hear audio when editing videoclip

Hi,
I have two issues.
#1: While editing my video, is there a way I can see the video and hear the sound at the same time? I've been trying to edit a video with no sound... very difficult to place a background for example at a specific time when I can't hear my voice, I can only see the video.
#2: After rendering, when playback in Quicktime for exemple, I can hear the sound but no video is playing. Why is that?
Thanks

Dont know why the last print screen is blury but it says:
Fomart: Windows Media
Output Windows MEdia Video 9
Include : Project Link
Output Audio: On
Post-Render Action - none
Channels: RGB
Depth: Millions of colors
Color: Premultiplies
Final Size 640x480

Can't use brush when editing pdf

When I try to edit a pdf file, using a brush, I only get the international no symbol.
If I open a new file the brush works fine. What do I need to change in the pdf to allow the brush to be used?
The other tools all work fine.
I have tried flatening the file, changing color mode, adding a layer

Yes, I know this. But what is curious to me is that since this file was imported so to speak, why is the natural default non-existant. Unlike an ai file that has been edited. It is in effect a new file. Seems wierd. In other words there is no natrual default for the brush like there is for the pen or pencil?
I think this is a glitch, because it does not compute.
When you open a new file in ai and delete all the brushes, it will not let you delete the last one which is called 50pt flat. This makes sense it would seem that this is the natural default, that i am expecting to see in my imported "new" file.
So, where did it go?

Moving control points of a mask

I know this is an easy question--
I have a mask over a video clip. I need to move the control points individually over time.
It's easy enough to move them in the inspector, but how do you move individual points with the mouse.
Whatever I try, it moves the entire mask!
Thanks!

Select the mask in the layer list. From the Adjust tools in the toolbar, select the adjust control points tool (second to the last in the list). You can then click on a control point in the canvas to select it. You can also shift click, or click and drag to select points. If you're using a bezier you can use the command key to add handles or the option key to break handles. It' pretty much like using paths in Photoshop.
If you aren't seeing the mask path in the canvas, make sure you Show Overlays, Handles and Lines enabled.

Changing control points of bezier mask?

This is probably a pretty simple question to answer, but I can't figure out how to change the control points of a mask after deselecting the mask layer and reselecting. I set my control points, then went through and made some other markers in the clip, then went back to the mask layer. The control points aren't showing up and the mask tool (that I used to make the mask) is deactivated. I've had this problem before and have been able to create a new mask and change the control points as long as I stay in the mask layer, but I'm sure there's a way to go back and forth. Does anyone know?
Thanks!

Press the tab key until your tool changes to Adjust Control Points. Alternatively, you can press and hold on the arrow tool and select it from the pop-up menu...
Patrick

How can I control a hud interface via the keyboard?

I can nowwhere find a way to control a HUD (heads-up display) via the keyboard
any ideas?
I do not like this at all...
if I remember correctly old fashioned inspectors (like the one in the Finder by option selecting "Get Info") could be controlled via keyboard. Control F6
Those were called "Floating window" and for it a keyboard shortcut could be defined in the Keyboard Preferences...
I couldn't figure out yet how to "focus" a HUD. Well to correct: the HUD in Preview to change the color can be activated by Control F6, but the HUDs in Aperture I couldn't figure out yet
any ideas?
Michael

I figured it out. Just make a full-screen invisible button
and place it on a layer on each frame.
For insatnce, Actions - Button for frame 2:
on (keyPress "<PageDown>") {
gotoAndStop (3);
on (keyPress "<PageUp>") {
gotoAndStop (2);
sends the show forward to frame (slide) 3 with a press of the
remote's "Next" button and sends it back to frame (slide) 1 with a
press of the "Back" button.
I have a Stop action on each frame.
This allows me to control a Flash show just like a Powerpoint
show. Cool.

After downloading Yosemite, my Ps CS4 doesn't work. It says install legacy Java SE 6, but when i go ok, or, more info can not reach any point to have it!!!

After downloading Yosemite, my Ps CS4 doesn't work. It says install legacy Java SE 6, but when i go ok, or, more info can not reach any point to have it!!! What will I do?

I have similar issues and was referred to a knowledge base article support.apple.com/kb/DL1572 This seems to corrected the issue.

Output control and message types

Hi guys,
my problem is this:I have created a new message type for output control for Purchase Order but when I create a new PO and click on 'messages' I expect that the new message type appear as a DEFAULT for example other messages like NEU,etc....
Customizing is OK--> I have parametrized the tr.NACE in all points and also Message Determination Schemas...What can I do?Is there a way to set message types as a DEFAULT for Output control in Purchase Order?
Thanks in advance,10 points for a resolutive answer...
Bye
Maximilian

HI
I assume that you have created a new message type by cpoying a standard.
Basic:
You need to maintain access sequence, form routine, forms.. for this output types (which should not be a problem if you are copying from std.)
Important:
You also need to maintain the Fine- tuned control for message type, for the new output type.
You need to add your new output type in the output determination schema.
then the thing should work. try!
MRao.

Deactivate the "Control Point # X,Y" labels in Motion 3?

Is there away to turn off the overlay labels that pop up when you're animating mask and shape control points? They're obstructing my view obscenely.
I can't figure out how to turn them off. There's not an option to deselect them in the View -> Overlay menu.

Is there away to turn off the overlay labels that pop up when you're animating mask and shape control points? They're obstructing my view obscenely.
I can't figure out how to turn them off. There's not an option to deselect them in the View -> Overlay menu.

Control references/refnums: general info

Please forgive this question, I am a relatively new LV programmer and the help files & manual seem quite poor to me!
I am after some basic information about control references & refnums as I am sure they would be of help to me.
1. What are the main advantages in using them? (i.e. what they can achieve)
2. How are they implemented?
3. How is a control refnum/reference passed from one VI to another programmatically?
Huge thanks to anyone who may be able to shed some light on this topic.
Dan

> 1. What are the main advantages in using them? (i.e. what they can
> achieve)
The references let you access properties and methods of controls on a
front panel. Previously, the access was limited to the diagram of that
panel, and each property node accessed a single particular control.
With control refnums, you can have one property node access an arbitrary
control with the refnum parameter controlling which one. You can also
send the refnums to subVIs meaning that the code can be abstracted to
simpolify your diagram and shared with other panels.
> 2. How are they implemented?
I assume you want to know how to use them. You right click on the
control or its terminal and under the create menu, next to where you can
create an implicit property node, you can also create a Reference node.
The datatype of this node is unique to the type of control that you
created it from, and when wired to a property node, the property node
will show the same properties as an implicit one. As an example, if you
have 8 Boolean buttons on your panel that need to be enabled, disabled,
hidden, colored, labeled, or whatever based upon the state of your
application. You can right click on the eight buttons creating
Reference nodes and build an array of the references. You can now loop
through your array and with one property node, set the properties of the
buttons based upon whatever logic or table of information that you need.
You can also do this in a subVI by passing the array of references to
the subVI.
It is also possible to get control refnums/references from other
properties. For example, a slider will give the reference to its
digital display, a graph will give references to its cursors, etc. It
is also possible to loop through the references of all objects on the
panel inspecting names or types rather than using the Create Reference
popup, but this is more advanced and requires casting the references.
If you really want to know how they are implemented, it is much like
file refnums or VISA refnums. I can give more info if you ask a more
specific question.
> 3. How is a control refnum/reference passed from one VI to another
> programmatically?
>
In the refnum palette there is a Control/VI refnum control. You drop it
on your subVI and right click to set the class. Note that there are
lots of classes arranged from basic to very specific. Class refnums
will convert to more basic automatically, but will not wire if they are
incompatible. So, if you are careful, you can select the class from the
menu and create the control refnum that you can wire to the connector
pane allowing you to pass refnums into the VI. A shortcut that is a bit
simpler is to draw the reference from the diagram to the subVI panel.
It will make the correctly typed control refnum for you, ready to wire
to the connector pane.
That is sort of the basic overview. You probably want to look at the
example -- general/cntrlref.llb/Property Nodes.vi. I also suspect that
the devzone contains other examples showing how they can be used.

UPDATE CONTROL/WM MOVEMENT TYPES

In OMJJ transaction in the UPDATE CONTROL/WM MOVEMENT TYPES i observed that for every single movement type there are many entries available .can anybody tell me how one can identify which is used and at what point?

101          B          A     GR for asset        - this will triger when you do the GR for asset against the PO
101          B          E     GR for sales order - this will triger when you do the GR for Sales order against the PO
101          B          P     GR for sales ord.st. - same as above but for project specifc
101          B          V     GR for acct. assgt.
101          F          A     GR for asset
101          F          V     GR for acct. assgt.
101     E     B               GR for sales ord.st.
101     E     B          E     GR for sales ord.st.
101     E     B          P     GR for sales ord.st.
101     E     B     X          GR STO for salesOrSt
101     E     B     X     E     GR STO for salesOrSt
101     E     B     X     P     GR STO for salesOrSt
101     E     F               GR for sales ord.st.
101     E     F          E     GR for sales ord.st.
101     E     F          P     GR for sales ord.st.
101     Q     B               GR for project stock
101     Q     B          P     GR for project stock
101     Q     B     X          GR STO Project stock
101     Q     B     X     P     GR STO for project
101     Q     F               GR for project stock
101     Q     F          P     GR for project stock
101          B          A     GR for asset
101          B          V     GR for acct. assgt.
101          B     X          GR stock in transit
101          B     X     A     GR st.in trans:asset
101          B     X     V     GR st.in tr:ac.assg.
101          F               GR for order
101          F          A     GR for asset
101          F          V     GR for acct. assgt.
101     E     B               GR for sales ord.st.
Like wise every movement has diff indicator and diff activity.
by looking the config you can see for all the activity

UPnP Control Point API in WinRT

Is there a UPNP Control Point API in WinRT? I'm looking for something similar to the API defined here: http://msdn.microsoft.com/en-us/library/windows/desktop/aa381122(v=vs.85).aspx
I'm aware of the WinRT APIs in the Windows.Devices.Enumeration and Windows.Devices.Enumeration.Pnp namespaces. But I can't seem to find a way to invoke UPnP
actions or even discover the devices network name through the DeviceInformation or PnpObject APIs.

There is no UPnP APIs in WinRT. If your UPnP device supports PNP-X then you can discover and pair your device using metro device settings UI. Once the device is paired, you can enumerate your device and
retrieve the device properties such as ServiceControlUrl, ServiceDescriptionUrl, ServiceEventSubscriptionUrl and IP address. Check the sample code snippet below. Once you get these properties you could use SOAP messages to interact with the device. (Note,
there are DLNA APIs
in WinRT, and we recommend using DLAN APIs to interact with DLNA devices such as DMRs and DMSs.)
Regarding UDP multicast port 1900, your application should be able to open it for shared access.
// C# sample code:
// Use SHA1 (version 5 GUID using RFC 4122 -
http://tools.ietf.org/html/rfc4122#section-4.3) to generate Device Interface Class UUID from UPnP device service type
// For Example:
//      For sample UPnP dimmer Device Service Types: "urn:microsoft-com:service:DimmerService:1"
//      the RFC 4122 algorithm produces the class 5 GUID: "{bb66ac6e-4e59-58dc-bafa-ce6af7e50cfc}"
using Windows.Devices.Enumeration;
using Windows.Devices.Enumeration.Pnp;
// Use the Device Interface Class UUID to get the UPnP device Interface object
// Set the AQS (Advanced Query Syntax) Filter for this query
var selector = "System.Devices.InterfaceClassGuid:=\"" + "{bb66ac6e-4e59-58dc-bafa-ce6af7e50cfc}" + "\"";
// PKEY_PNPX_ServiceDescUrl = "{656A3BB3-ECC0-43FD-8477-4AE0404A96CD},16389"
string serviceDescriptionUrlProperty = "{656A3BB3-ECC0-43FD-8477-4AE0404A96CD},16389";
// PKEY_PNPX_ServiceEventSubUrl = "{656A3BB3-ECC0-43FD-8477-4AE0404A96CD},16390"
string serviceEventSubscriptionUrlProperty = "{656A3BB3-ECC0-43FD-8477-4AE0404A96CD},16390";
// Create Interface properties to read from the interface object
string[] interfaceProperties = { "System.Devices.ServiceAddress", "System.Devices.ServiceId", "System.Devices.DeviceInstanceId", serviceDescriptionUrlProperty, serviceEventSubscriptionUrlProperty };
var interfaceObject = await DeviceInformation.FindAllAsync(selector, interfaceProperties);
// Service Control Url
string[] serviceControlUrlArray = (string[])interfaceObject[0].Properties["System.Devices.ServiceAddress"];
string serviceControlUrl = serviceControlUrlArray[0];
// Service Description Url
var serviceDescriptionUrl = interfaceObject[0].Properties[serviceDescriptionUrlProperty];
// Service Event Subscription Url
var serviceEventSubscriptionUrl = interfaceObject[0].Properties[serviceEventSubscriptionUrlProperty];
// Service ID Property
var serviceId = interfaceObject[0].Properties["System.Devices.ServiceId"];
// Use Interface object and DeviceInstanceId to get the Device Object
// Create a Device properties
string[] deviceProperties = { "System.Devices.IpAddress"};
// Device Instance ID
string deviceInstanceId = (string)interfaceObject[0].Properties["System.Devices.DeviceInstanceId"];
var deviceObject = await PnpObject.CreateFromIdAsync(PnpObjectType.Device, deviceInstanceId, deviceProperties);
// IP Address
string[] ipAddressArray = (string[])deviceObject.Properties["System.Devices.IpAddress"];
string ipAddress = ipAddressArray[0];
OutputText.Text = "Service Control Url: " + serviceControlUrl + "\rService Description Url: " + serviceDescriptionUrl + "\rService Event Subscription Url: " + serviceEventSubscriptionUrl + "\rService ID: " + serviceId + "\rIP Address: " + ipAddress;

How can i fix my iphone i can't update or download apps, when i try it tells me toput my credit card info and i do but when i push done it tells me my payment has been declined, but why do i have to pay to update or download free apps. How can i fix this?

how can i fix my iphone i can't update or download apps, when i try it tells me toput my credit card info and i do but when i push done it tells me my payment has been declined, but why do i have to pay to update or download free apps. How can i fix this?

You must contact iTunes support to get the problem resolved.
http://www.apple.com/support/itunes/contact/
If there is a problem with your account or payment info, you cannot
download anything (including free apps or updates) until the matter
is resolved.
In countries where the iTunes Store only sells apps, the accepted payment methods are Visa, MasterCard, and American Express. Other payment types such as gift cards, store credit, monthly allowances, ClickandBuy, and PayPal are not accepted. Depending on your App Store country, prices may be listed in your local currency, US Dollars, or Euros. http://support.apple.com/kb/HT5552

Copy Control for Transaction Types

Hi,
Was wondering if someone could help on following topic. We need to specify the possibility of copy control (follow-up) for certain transaction types in CRM 6.0. I've specified the source TT (ZAPP) and the target TT (ZCON) in customizing activity : Define Copying Control for Transaction Types.
ZAPP = Custom Appointment Activity
ZCON = Custom Opportunity
Now, when I want to create a follow-up for ZAPP in the WebUI (via dropdown 'More' and action 'Follow-Up'), I always get an extensive list of transaction types (about 30) rather than only the opportunity that I originally specified. Any ideas?
Thank you,
Sebastiaan.

Hi Kai,
Many thanks for your answer. Indeed, the COPY_DOCUMENT is a very good alternative as it also directs the flow for follow-up. However, I have a question in regards to using this method. I can see that there are parameters that need to be provided (like PROCESS_TYPE etc) but apart from that is it also possible to change fields in the copied document.
e.g. Currently the description of the copied document gathers the description of the action definition, but how can you pass the description of the previous document for instance? Is this also done via the actual parameters?
Thank you,
Sebastiaan.

Mask control point 'HUD' type info-can it be disabled when editing points?

Similar Messages

Maybe you are looking for