Mass Add-Meta to clips already in the system..

Hello!
Any way for me to select a bunch of clips, and add a bunch of custom meta to all of them in one shot? I'm having problems doing so, just not sure if there's a trick.
Ryan

Actually, there is a way to do this if filtering is practical on your assets. You can use the Search Expired response to batch other responses. Create a new Search Expired response and set it to use the Custom 1 event type. Set the Timestamp Field to "Creation Date". Leave the Expiry Days empty. Below that you can filter based on the usual options or leave them all open to hit all your assets (up to you).
Next, create a Set Asset Metadata response and populate it with the value you want to apply to your assets. Set this response to run by Subscription based on the Custom 1 event type.
Finally, schedule your Search Expired response to run. When it does, it will fire what amounts to a dummy event (Custom 1) on the filter it was set for, triggering the Subscription you set up to listen for that event type. That fires the Set Asset Metadata response, and now all your assets are tagged with the desired default in the new field.
Beware though, if you choose to use the Create event type filter in your Search Expired response, it will cause all your assets to attempt a re-analyze. The Custom event types are there for tethering a Search Expired response to a Subscription, so unless you know what you are doing, avoid the other event types on a Search Expired response.
This could also be used to bulk dump XML for a group of assets, or to bulk copy and transcode, or bulk archive based on very intricate filters.
The documentation does not really explain this, but it does indeed work. Once you get the desired result, you can disable the schedule for the Search Expired response.

Similar Messages

  • I want to use the default Apple desktop pictures but also add my own. Where are the system desktop pictures located?

    I like the default images Apple provides for the desktop but would like to add my own.  I have desktop pictures set to change randomly every minute.  Is there a way for me to add my own images to the categories (like 'Plants' or 'Nature') that are already in the Desktop and Screen Saver preference panel?
    Thanks!

    luoqianhe wrote:
    I like the default images Apple provides for the desktop but would like to add my own.  I have desktop pictures set to change randomly every minute.  Is there a way for me to add my own images to the categories (like 'Plants' or 'Nature') that are already in the Desktop and Screen Saver preference panel?
    Thanks!
    MacintoshHd>Library>Desktop Pictures

  • How to add attribute to characteristic already in production system

    HI Guru's ,
                     How to add a attribute to characteristic which already exist in production system.
    thanks in advance

    Hi Venkat,
    We don't make any design changes in production box. Usually you make changes in Development box then transport that object with request to Quality box. You test the changed object there, if no inconsistancies found you will transport the object to Production box with same request.
    In development box, if you want to add the new attribute to the characterstic, you need to delete the complete data in the characterstic.
    Thanks
    Sreekanth

  • 0x000000f -how do I fix this!! I already have the system recovery DVDs

    I bought the recovery cds because of the same problem(0x00000f (?))
    I put the cd and restarted my laptop and pressed f11key but it doesnt work. It only says F11...System Recovery on the left bottom on black screen. Can u help me please... (I already got system Recovery DVD)

    When booting from the Recovery Discs- do Not tap F11. That is only to boot into recovery partition on the hard drive. Instead- tap the Esc key immediately after powering on to bring up the menu. Then tap F9 Boot Options to choose to boot from CD/DVD drive.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Same customer entry exists already in the system?

    Hello
    I am creating a new customer from my Z prog.
    But, i need to check for duplications upon (legal) name, address, bank details, VAT number, is there any standard SAP function module/BAPI/Class?
    Thank yop

    Did you try the BAPI "BAPI_CUSTOMER_FIND". Fill in the SELOPT_TAB with required table name and field names, and if your result tab returns null value then there is no duplicate customer.
    Edited by: Suresh Karri on Oct 13, 2011 4:03 PM

  • Is there a way to see all my compound clips created on the timeline, in the browser as an accessible thumbnail list....?

    I am facing a problem that
    due to big footage I first extracted the seemingly fine clips in chunks in one timeline in various layers which is still enormous for my RAM
    now I have to take out smaller and more appropriate bits from this timeline
    I have opened another timeline where I just copy paste the best shots from my previous enormous timeline and this works fine due to less media for 6gb RAM mac pro
    but it is really tedious to go back and forth to copy paste
    it would be so wonderful if I could extract those bits from the clips just like we do with any other new footage from the browser window with all the clips visible
    I think one way can be to export these compound clips seperately and import them as events into the browser but that would be a generation loss
    is there any other way.....? to view these compound clips infront of my eyes all at once or keeping all that footage on the timeline besides the finalising layer is the only option...?
    I am facing this rare problem because I'm editing a music video and no shot is more than 2 seconds and that too from several groups of footage that has to be mixed.....so all the data has to be visible to decide if a bit of guitar piece would look good here or drums or close up or long shot.....so everything has to be seen....can you suggest me a smarter workaround please ?

    Thank you.Ok say for e.g.
    500 video files imported in fcpx
    800 clips extracted from these obviously on the timeline and joined/compounded according to their content in say 15 layers according to 15 instruments used ,so now just to see the entire usable footage ....
    now one 7 minute song sequence has to be made where bits would be simultaneously taken from these 15 layers as all instruments are playing simultaneously
    these shots are not more than 2 secs each according to the beat........
    when I try to work with these 15 layers as well as the Final primary layer that I'm making in the same timeline my fcpx becomes slow
    but when I drag individual layer to individual timelines it is fine so that is the only option
    but now for every 2 second bit I have to go back to the 15 layered timeline and find one single suitable shot
    So I was wondering is there a way to be able to see these layers and clips on the timeline in the browser in a systematic fashion like the way we get with keywords  ?
    and keywords can only be used in the imported clips already in the browser ,and not after we drag it on the timeline.....
    Till now I think exporting and importing back is the only option ...but is there another work around ?

  • How do I add Meta tags to pages?

    Is it possible to add meta tag information for the pages (such as keywords, description, robots, etc.) directly in Muse?
    I'd like to add meta tag data to describe the page to help with search engine optimization.

    I found a lot of useful information on here: http://www.muse-themes.com/blogs/news/6103624-seo-in-adobe-muse-search-engine-optimization #comments
    However I would like to know: If you have multiple pages dealing with different topics does one need to adjust the meta-data accordingly for each page.
    For example, I am redoing a website for a small earthmoving contractor who offers a range of services including new lawn installation (NOT mowing!), drainage, landscaping, post hole boring, driveways - to name a few; these are essentially the main pages with content explaining each service a little further.
    So would I be correct in assuming I should have a unique description, keywords and (obviously) page title for each page?
    How about the home page? Should the metadata attempt to cover all services offered within the website as a whole, or just the content of the home page?
    Thanks in advance!

  • Mass Flow Meter

    Hi all,
    I am using PCI 1710 board to control fuel cells vlaves and Mass Flow Meter. 
    Could any one help in getting the mass flow meter show me the Flow rate of the Gas.
    I am using Burkert 8006 Mass flow meter and I wanna connect the MFM to the PCI 1710 and jus want to show me the flow rate. Could any one tell me, to which pin should i connect the MFM to, it has a 15 Pin Sub HD Socket. (Currently taking output from the Process Value Output and Process value ground and connected to the PCI1710 A11 and A10(Analog)). Thank. Awaiting your response.
    Regards,
    Vijay

    What connections do you have to this device? According to the manual you should have a 9 pin D sub connector for the 8006 model. If you have a 15 pin D sub I will try the 15 Pin D sub connections that are in the book on page 7.
    If this does not work I am not sure what to tell you. It should use RS-232 with these connections. Did you get a MFM that has communication protocols?
    Tim
    Johnson Controls
    Holland Michigan

  • Java Add-In installation on a existing ABAP System (MSCS Cluster)

    Hi all
    we try to install a Java Add-In for a already existing ABAP System with
    SAPinst. The ABAP System is a NetWeaver2004s SR1 System in a MSCS Cluster.
    We have the Problem that we can´t choose the Installation Drive during
    the SAPInst Define Parameter Step during the "Central Services Instance (SCS) Java Add-In" Installation.
    But in the Installation Manual for
    NW2004s Java AS in Chapter 4.3.2 is stated:
    "Caution: You must install it on the same shared disk as the ASCS instance."
    If I run the Installation, the SCS will be installed on the local disk E:
    beside the Central Instance. But it need to be on the shared Disk P:
    beside the ASCS installation. How can I control this?
    Stefan

    obviously the network share saploc is existing in your system an pointing to a local device.
    Delete the local saploc share, install SCS instance, run MSCS first node, additional node, create the local share saploc again (don't forget to set permissions on the share, the default permission did only allow Read vor Everyone) and proceed with installation.
    There is a note in creation for this issue.
    peter

  • TS1398 Wifi not responding after the software update. restored the system but still no luck.

    After I updated the software, the wi-fi has stopped working. I have already restored the system but the problem remains. Wifi is working fine otherwise.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I wish to export several still images from iMovie as JPEG or TIFF. Is it possible to do this using iMovie, if so how? Any advice is greatly appreciated. I've already managed to add a freeze frame to extract the desired frame but I can't export it. Thanks.

    I wish to export several frames from iMovie as if they were images (like JPEGs or TIFFs). Is it possible to do this using iMovie, if so how? Any advice is greatly appreciated. I've already managed to 'add a freeze frame' to isolate the desired frames but I can't export it. Thanks.

    Ach... I found a solution thanks to previous posts which came to light after I'd posted what was obviously a question that had been asked before.

  • Is there a way to make an audio clip not cover the whole project? I want to add audio clip or song and let it start at a certain point in the project. I'm working with iMovie on IPad!

    Is there a way to make an audio clip not cover the whole project in iMovie? I want to add audio clip or song and let it start at a certain point in the project. Whenever I add audio or song it covers the whole project. I'm working with iMovie on IPad!

    Thank you for your reply Karsten but unfortunately this didn't help me so far. Or maybe I'm missing something?
    First the link is a tutorial for iMovie on a Mac. I'm using iMovie on iPad so the steps are inapplicable.
    Second it is only possible for me to manipulate the end part of the sound clip to whichever duration I want. But I can't do the same with the 'beginning' of the sound clip.
    I simply want to place some photos in the beginning of my video with no sound in the background then after like 2 secs I want to start the music clip. For some reason that is not possible! Cause every time I drop the music clip unto my project timeline it automatically place it self along with the first frame in the project! And consequently the photos and music are forced to start together.
    Hope I'm making sense...

  • Subject : Slideshow looks bad  Hello guys  I have a project in my Final Cut just about done.  I want to add my slideshow as part of the project and burn it to DVD.  In my slideshow, there are some stills from the movie clips and some downloaded from the i

    Subject : Slideshow looks bad
    Hello guys
    I have a project in my Final Cut just about done.  I want to add my slideshow as part ofthe project and burn it to DVD.  Inmy slideshow, there are some stills from the movie clips and some downloadedfrom the internet but they all look blur when playback and even worse if Iapply Ken Burn to it.   Pleasesome one can tell my how to do it right or it can’t be done because thedownload quality and stills from the clip are not suitable or slideshow.  Thank you
    PSC

    Thank you Ross.
    The entire DVD containing Quick Time movies (Final CutExpress project) and slideshow was done in iPhoto.  The Final Cut project was rendered prior to export to QT,  the slideshow was sent to iDVD withoutrendering. The slideshow with most of the pictures from my still camera incombination with stills from movie clips and some downloaded from the Internet.After burning, the movie playback is perfect but the slideshow is not.  The slideshow containing 3 differentkinds of pictures; those from my still camera looks OK; the stills from themovie clips and from the Internet are not.  I don’t have much knowledge in this game, but I think NTSCwith frame size 720x480, and the downloaded picture Item Property shows most ofthem are between 400 to 500 x 300 to 600, may be both of them are not suitablefor TV screen while the stills from my still camera looks OK because they are2048x1536.  Please enlightenme.  Once again, thank you so much,I really appreciate the time you offered.
    psc

  • Is there a way to mass add m4a music folders to the library?

    I have several thousand music folders containing m4a music. The files are in the iTunes music folder but are not in the library. iTunes can only add one folder at a time to the library, a time consuming, user hostile restriction. Is there a way to mass add all of the folders to the library using either iTunes or another program?

    Will iTunes ignore the non-music folders and files?
    Yes, it will only import the files it can import.
    I've read posts about files disappearing seemingly caused by iTunes.)
    It shouldn't but you do have an up-to-date back of all your files, correct?

  • Is it possible to add 16GB (2x8GB) of ram to the stock 8GB (2x4GB)  that is already in the iMac?   A total of 24GB (2x4GB, and 2x8GB)

    Purchasing the new 27" iMac
    Is it possible to add 16GB (2x8GB) of ram to the stock 8GB (2x4GB)  that is already in the iMac?
    A total of 24GB (2x4GB, and 2x8GB)
    upgrading memory on the new iMac 27"3.4GHz Quad-core Intel Core i7,
    8GB 1600MHz DDR3 SDRAM - 2x4GB
    3TB Fusion drive

    You can do it without any problem, but make sure you put the memory horizontally, so you will get the advantages of the Dual Channel. You can buy the memory in OWC or Crucial to make sure you have a compatible memory

Maybe you are looking for