Mass Extension of cost center and cost element validity dates

Hi SAP Gurus,
We have around 5000 cost centers and 6000 cost elements for which "Valid to" date is 09/27/2008. We need to extend this date for another 5 years.
Can you please suggest any pointers as how we can do the mass update.
We have already tried KS12 which is not of any help.
Thanks,
Sreeni.
1-408-307-7965
CA, USA.

Hi,
Run the LSMW.
Or Use the fuction automatic creation of Primary/Secondary cost elements in the SPRO.
Or You can write a program which replaces the valid to date directly in the database table.
For this you require ABAPER help.
Regards,
Edited by: Jagadeesh Sornapudi on Sep 13, 2008 8:25 AM

Similar Messages

  • Report Painter Request - Cost Center and WBS Element

    Hi Everyone,
    Currently, my company settles all project related expenses through to a cost center by way of an internal settlement cost element (category 21).  The issue with this is that when the expense gets to the cost center, they lose all visability as to where the expense originated, such as salaries or travel expense (category 1 cost elements).  We can't switch the settlements to the originating cost element from wbs to cost center just because of the additional data/volume that will cause.  My thought was to create a report painter that can run by cost center but also show the wbs's that settle to that cost center and group the expenses by primary cost element (cat 1).  I'm assuming that there is a way to marry a cost center and wbs element by way of the wbs settlement rule but how would that be done for reporting purposes?  I've seen it done before by way of a nightly job that created sets based on the combination of cost center and wbs but I'm not sure how that was done.  Any advise and examples?
    Example:
    Cost Center:  IT
    WBS: A.0017.01.01 (settles to cost center IT)
    Postings made:
    1.  CC IT and CE 552000 "salaries"..............................$20,000
    2.  WBS A.0017.01.01 and CE 552000 "salaries"........... $5,000
    3.  Settlement of WBS to CC (expenses flow through to CC IT by way of CE 985000)
    I want to run CC IT and see that the account 552000 really shows $25,000 and can be broken down by cost object (CC and WBS by the amounts above)
    Thanks,
    Pete

    Hi Peter,
    I had a similar requirement and used report painter report group 1SHK-002 (in library 1VK).
    I took a copy of the standard and ameneded it slightly, I switched the explode so it occured on the cost center not cost element.
    The report runs so that direct costs on the cost center are shown at primary cost level. And values settled to the cost center are shown on the partner object. In your case i guess WBS Elements (Partner ObjType WBS).
    Now in my case I didnt need cost element breakdown on partner level, just on cost center so effectively I have(sorry for text alignment but I hope you get the idea):
    GL1   .............  100
    GL2   .............  250
    + Cost center1 total ....350
    GL3 .............   50
    GL4 ............. 100
    + Cost center2 total.... 150
    Primary Cost Total ..... 500
    X-YZ-1.200 .............   50
    X-YZ-1.400 ............. 100
    + WBS total ............. 150
    IO 1............. 100
    IO 2  ............. 100
    +IO total  ............. 200
    Partner Total............. 350
    Overall total .............  850.
    Its not exactly like your requirement but it might be a good report for you to work with to get what you need.
    Elaine

  • Mass update of cost element description - edit a table

    Hi Folks,
    i would like to know wich is the best way to update thousand of description of cost element!
    this is due to the fact that i have 4 differents languages to manage....so every time it's necessary to enter them in 4 languages, but the problem was that nobody have done like this, so now i have discrepancy at description level and i want to update...quickly.
    i was thinking about table editing in CSKA i know it's not the right way to procede but it's only description and i don't want to spent time in making catt....
    In any case i would know wich is the command to edit  a table, for my knowledge.
    Thanks

    Hi,
    To edit a table type &sap_edit in the transaction window, while being in SE16N and entering the table. However, the right table for texts is CSKU and not CSKA.
    Alternatively, you can do mass creation of cost elements 4 times while log-on in different table (OKB2 and OKB3 transactions).
    Regards,
    Eli

  • MASS  Maintenance  of cost element

    Hi,
    What is the TC for mass maintenace of  cost element like TC :fs15 for gl
    With regards,
    vk

    Hi krishna,
    there is no mass maintaiance of the Cost element. only automatic creation of cost element.
    this automatic creation is also one time job. after that only very few cost element will be created.
    and also to be noted is the data under the cost element is alos very less : only thing are assigned. and there is no
    that ia cost element cat, defult account assigment only.
    every time u create a few G/L u can go for the automatic cost elements.
    hope this is clear.
    give me some points.
    With Regards
    Krishna Sinagreddy

  • Derivation of Cost Center from WBS element MAster data at the time of invc.

    dear all,
    during invoice postings with wbs element account assignment system do not derive assigned cost center from wbs element master data.
    how can the system derive the cost center automatically??
    Is there any BADI available to this issue.
    regards
    saqib

    Dear,
    WBS is Real and cost center in the master data is for statistical postings i.e. responsible cost center in WBS.
    How to make substitution (OKC9) deriving the cost center in document line items / invoice posting etc.
    Kindly give detail process for its configuration steps and is there any BADI available which can be useful in this regards?
    Regards,
    Saqib Usman

  • Cost element validation

    Hi Guru's
    first i created a cost element valid from 1.10.2006 to 31.3.2009 but my client needs the validity period from 1.4.06 to 31.3.2009.for this i entered in Ka02 but  the validity period cant be in changeble mode.
    for this what can i do ,,,
    Thanks in advance

    hi
    Check with this
    go to OKEON choose the cost center. in the second half you will find a tab  of validity period.  Ther go and change the validity period.
    I think it will work out
    Cheers
    Muralidhar

  • How to Add new fields in Cost element Master data transaction: KA01/02/03?

    New fields ZORGUNIT(CHAR 4) is needed to be added in a separate tab. The data should be updated in cost element master data trx.

    >
    Sr!^^ wrote:
    > Hi
    >
    > try with PM01
    Is there any relevancy in your answer?
    Have you read the question?

  • How to extend secondary cost element validity period?

    Hi guyz,
    Is there any way to extend assessment cost element validity period ?
    Need your answers asap..Thanking you

    Hi,
    Let me give you one ex., Suppose you have created sec. cost Element through KA06 for validity peirod 10.02.2009 to 31.12.2009. So, when you are extending the validity period for the same, you need to create this sec. cost Element again with validity from 01.01.2010 to the date you require (say 31.12.2010 or 31.12.9999).
    Hope it will clear to you. Pls get back for further query.
    Thanks & Regards,
    Taral Patel

  • Table for Cost Center and WBS Element.

    Hi Experts,
    i done the creation of Servcie Contract with account assignment category as Cost Centre "K"  & Project "P". Now i'm trying to take the report for this document.
    Plz help me, in which table the Cost center data and WBS Element data is stored.
    Regards,
    sudhakar

    hi!
    check the table T163K and the field is KNTTP.
    Reward if useful.
    Yuvi.

  • Mass creation of Cost elements

    Hello SAPians,
    I am having a issue related to cost elements.
    please find the detials below.
    I need to add new cost elements(may be something like 100 accounts) in cost element groups(KAH2)
    I tried with LSMW session but there is no use of it.
    can anyone please let me know if there is any other way in changing the cost element group for adding these new cost elements.
    I appreciate oyur quick response.
    Thanks in advance
    Regards

    Hello All,
    @ Eli:Can you please let me know how can we proceed further in SE16N,I am confused with that screen.
    please let me know the fields like table and the fields which need to be taken care.Thanks for your support
    @ Divraj:Accounts are not in a particular order and they are very huge in number like few 100's-800's
    @Sangram:can you please let me know if it is accepted in SAP terms for updating using the Program for these 800 accounts or so.
    please let me know if there is any other option in doing.
    Thanks for your valuable time.
    Regards

  • Error while uploading cost element planning data into KP06 transaction

    Hi,
    I am facing the below error while uploading the Cost Element Planning excel file in KP06 transaction code. Please help me in fix this issue.
    We are trying to enter a budget upload using Transaction code: KP06. We get the following message errors  when we do this. It seems revenue accounts cannot be entered using cost centers. Question, how should these accounts be added? Kindly help me how to add Revenue cost elements to this planning?
    Error accured when generating data for the planning processor
    Messange no.K9400
    Revenue element 451000 can not be planned on cost center 9720
    Thanks
    Kishore

    The cost element which have  category 01 only can be planned in the Kp06.
    Regards
    Ranjan

  • Secondary cost element actual data not posted

    Hi Gurus,
    Actually we are posting the actual cost elements data into particular cost cenetr through batch job.upto 12/31/2009 the actual data is showing for the particular secondary cost element(overheads).Only after 01/01/2010 the actual data is not posted for this particular cost element inthat particular cost center.For the remining cost elements into that particular cost cnetr the actual data is posted thru batch job.We checked that particularsecondary cost element,the validity period is upto 31/12/9999.Suggest on this one.
    Thanks in advance
    Jana

    Hi,
    Did you execute overhead allocation processes as from 01/01?
    Regards,
    Eli

  • Inventory statistical cost element old data recovery

    Hell experts,
    For material process recently we have created one inventory GL without statistical cost element category 90, now the user asking for the report at controlling side to show the old cost.
    If I activated statistical cost element for the inventory GL i can not get the old cost data in CJI3 & CJI5, is there any way to get  the old cost data. ?

    Hello Muhammad Danish Rizwan,
    You can try to repost the FI document to CO via T-code:OKBA. Please first test un OKBA, if anything
    is OK , then you can real run it.
    Best regards,
    Ronghua Fan

  • Mass extention of service entry sheet condition record validity date

    Hi all,
          I have immediate requirement. i need to extend the validity date for condition record related to the Service entry sheet. This has to done mass sheet changes.
         I am looking for Any bapi or Standard function module or any config changes.
    I am looking forward for your valuable inputs.
    Regards,
    Sreenivasa Sarma K

    Arun,
    This doesn't suprise me...
    I'm not sure if there is a standard solution, but you could do this via user-exit/BADI (see [here|http://www.sapfans.com/forums/viewtopic.php?p=648307] under maintenance plans )
    PeteA
    [www.pjas.com]

  • Cost centre and cost element related tables

    Hi,
    Could any help me in knowing whre the cost centre goup and cost element groups are maintained.
    Could you help in proving the link tables between Cost centre, Cost centre Group, Cost element and Cost element group.
    Regards,
    Krishna

    Hi,
    Please refer to Table SETLEAF for cost element group and cost center group. This table is based on set class and 0101 is for Cost Center Group and 0102 is for Cost Element Group.
    Cost Center Master data table is CSKS and Cost element Master data table is CSKB. To the bse of my knowledge you cannot directly join these two tables with SETLEAF table as key figure fields are not common. In case you are getting any ABAP report developed, you can ask the developer to write a code saying Controlling Area is equal to Organizational Unit as Set Subclass.
    Hope this helps.
    Regards,
    Harish

Maybe you are looking for