MASS  Maintenance  of cost element

Hi,
What is the TC for mass maintenace of  cost element like TC :fs15 for gl
With regards,
vk

Hi krishna,
there is no mass maintaiance of the Cost element. only automatic creation of cost element.
this automatic creation is also one time job. after that only very few cost element will be created.
and also to be noted is the data under the cost element is alos very less : only thing are assigned. and there is no
that ia cost element cat, defult account assigment only.
every time u create a few G/L u can go for the automatic cost elements.
hope this is clear.
give me some points.
With Regards
Krishna Sinagreddy

Similar Messages

  • Mass update of cost element description - edit a table

    Hi Folks,
    i would like to know wich is the best way to update thousand of description of cost element!
    this is due to the fact that i have 4 differents languages to manage....so every time it's necessary to enter them in 4 languages, but the problem was that nobody have done like this, so now i have discrepancy at description level and i want to update...quickly.
    i was thinking about table editing in CSKA i know it's not the right way to procede but it's only description and i don't want to spent time in making catt....
    In any case i would know wich is the command to edit  a table, for my knowledge.
    Thanks

    Hi,
    To edit a table type &sap_edit in the transaction window, while being in SE16N and entering the table. However, the right table for texts is CSKU and not CSKA.
    Alternatively, you can do mass creation of cost elements 4 times while log-on in different table (OKB2 and OKB3 transactions).
    Regards,
    Eli

  • Mass creation of Cost elements

    Hello SAPians,
    I am having a issue related to cost elements.
    please find the detials below.
    I need to add new cost elements(may be something like 100 accounts) in cost element groups(KAH2)
    I tried with LSMW session but there is no use of it.
    can anyone please let me know if there is any other way in changing the cost element group for adding these new cost elements.
    I appreciate oyur quick response.
    Thanks in advance
    Regards

    Hello All,
    @ Eli:Can you please let me know how can we proceed further in SE16N,I am confused with that screen.
    please let me know the fields like table and the fields which need to be taken care.Thanks for your support
    @ Divraj:Accounts are not in a particular order and they are very huge in number like few 100's-800's
    @Sangram:can you please let me know if it is accepted in SAP terms for updating using the Program for these 800 accounts or so.
    please let me know if there is any other option in doing.
    Thanks for your valuable time.
    Regards

  • Planning on Cost Element group

    Hi Guys,
    I have a PLAN Query with costelement in the rows and i am extracting costelement group hierarchy from R/3 and using the hierarchy on the costement in the rows.
    Now i have a requirement users want to enter the PLAN data at the costelement Group level but NOT at the costelement level BUT the problem is COSTELEMENT GROUP is a TEXT Node.
    How do i handle this situation.
    Shashi

    Hi Shashi,
    Create 2 Char - 1) Cost Element Group & 2) Cost Elements.  Using External Hierarchy button in the char IO maintenance, select Cost Element Char as an external Hierarchy in the Cost Element Group char.   And then create a separate Hierarchy on the main basic char Cost Element Group.
    Before you build the hierarchy maintain master data for both char..
    Hope this helps.
    Jason

  • G/L accounts or cost elements for maintenance order

    Hi,
    Can anybody explain the following.
    1- What are the applications of inventory and consumption cost element / GL accounts, while posting goods issuance, good receipt and maintain service entry sheet with reference of maintenance orders' reservations and purchase requisitions? I want to know which cost element or GL account is debit and credit during every posting. And What are their impacts on maintenance order?
    2- What is the purpose of "source" (cost element group) and "settlement cost element assignment" in allocation structure when we want settle maintenance order on cost center?
    3- On which accounting term, the maintenance order should be settled, cost center or GL account? what is the best practices?
    Regards,

    Goods Issue & Goods Receipt:
    In OBYC, G/L account for Inventory posting & Offset account for that Inventory posting will be maintained. Inventory posting will be BSX & Offset will be GBB.
    In Material Master, valuation class will be assigned. Based on this valuation class, this entry will be taken.
    Service Entry Sheet:
    Problem with Service Entry Sheet creation through ML81N
    service entry sheet

  • Taking wrong cost element in Preventive maintenance.

    Hi Pm Gurus,
    I am running Preventive maintenance scenario. I have created T/L with External service as control key (PM03) and given description of external service (no service no), entered material group, cost element, price, Purchase group etc. when the call object is generated from the mainteance plan which is assigned with the above task list, i am not able to see the cost element in Maintenance Order external services view, the purchase Requestion is getting generated automatically in the maint order, when opening the PR the account assignment differs from what i given in the T/L. so at the time of settelment it causing error.
    Kindly let me know what settings i have to check.
    I have already created default profiles for external services, material procurement and assigned to the order type.
    Thanks in advance
    R. Loganathan

    As mentioned in above threads, you can check for cost element in OBYC.
    Cost element for External Service will be derived in following ways.
    1. Create Default Value profiles for External Procurement
    2. If you have maintained material group & valuation class in service master, it will check in OBYC for GBB. Double click that. In the next screen, search for VBR with the valuation class mentioned in service master. Cost element should have been maintained, that will be filled up.
    3. If you have not maintained any valuation class in service master & you maintained material group in service master, it will check for valuation class in IMG => Material Management => Purchasing => Material Master => Entry aids for Items without Material Master. In that screen, search for material group which has been in service master. Take that valuation class. Do the same step as in step 2.
    4. Neither Material group nor valuation class in service master, do the same as step 2 & for the VBR without valuation class would have been maintained. Cost element will be taken from there.
    5. If no data is maintained in above settings, then the cost element will be picked up from task list.

  • How to create cost element in mass

    Hi All
    I want to create cost element in mass. i created to new GLs . and now i want to create there cost elements in more than 60 company codes . is there any way to create it in mass . please suggest with t.code
    Thanks in Advance
    Nikhil

    Yes you can create cost elements in a batch session automatically.
    Please use tcode OKB2 for default settings. 
    Define batch input session - OKb3
    Execute batch session : SM35
    Regards

  • Mass Extension of cost center and cost element validity dates

    Hi SAP Gurus,
    We have around 5000 cost centers and 6000 cost elements for which "Valid to" date is 09/27/2008. We need to extend this date for another 5 years.
    Can you please suggest any pointers as how we can do the mass update.
    We have already tried KS12 which is not of any help.
    Thanks,
    Sreeni.
    1-408-307-7965
    CA, USA.

    Hi,
    Run the LSMW.
    Or Use the fuction automatic creation of Primary/Secondary cost elements in the SPRO.
    Or You can write a program which replaces the valid to date directly in the database table.
    For this you require ABAPER help.
    Regards,
    Edited by: Jagadeesh Sornapudi on Sep 13, 2008 8:25 AM

  • KB15N_No adjustment account found for cost element Message no. K5112

    When I am trying to post Manual Cost Allocation through TC KB15N with the following input data I am getting the following error message and the same could not be posted.  Kindly advise.
    Screen Variant used: 01 SAP Cost Center
    Input Type: List Entry
    Item No.1
    Sender Cost Center : 3402100942
    Cost Element: 6200001
    Amount : 62,201.56
    Receiving Cost Center: 3405100945
    First four digits represent profit center code.  If first four digits are equal the above error is not coming. But posting is needed with different profit centers.
    No adjustment account found for cost element
    Message no. K5112
    Diagnosis
    Neither standard account determination nor the enhanced function found an adjustment account for the reconciliation posting.
    System Response
    No adjustment account could be determined for cost element  in company code SCCL.
    Procedure
    Maintain the standard or enhanced account determination for transaction KAMV. Information on maintenance can be found in the program documentation.
    Execute

    Hi all,
    I face the issue like this but with transaction KOAP - Plan settlement
    But, the problem is that, I do not active reconciliation ledger, so I do not maintain any thing relate to reconciation ledger or adjustment posting? I can do transaction "actual settlement"  without error
    So, How this error come to me?
    And how I can fix it?
    Thanks all!

  • No Adjustment account found for cost element

    Dear Gurus,
    I am getting Three errors  msg "No Adjustment account found for cost element" when i try to run the conformation of production order create  ( T Code : C015 )"  and I am not able to save the record . like
    1 ).No adjustment account found for cost element
    Message no. K5112
    Diagnosis
    Neither standard account determination nor the enhanced function found an adjustment account for the reconciliation posting.
    System Response
    No adjustment account could be determined for cost element  in company code XXXX
    Procedure
    Maintain the standard or enhanced account determination. Information on maintenance can be found in the program documentation.
    Execute
    2) . No adjustment account found for cost element XXXXXXXX
    Message no. K5112
    Diagnosis
    Neither standard account determination nor the enhanced function found an adjustment account for the reconciliation posting.
    System Response
    No adjustment account could be determined for cost element XXXXXXX in company code XXXX.
    Procedure
    Maintain the standard or enhanced account determination. Information on maintenance can be found in the program documentation.
    Execute
    3 ) No account is specified in item 0000000002
    Message no. F5670
    Diagnosis
    No account was specified for account type "S" in item "0000000002" of the FI/CO document.
    System Response
    The Financial Accounting program cannot process the document.
    Procedure
    A system error has probably occurred in the application you called up. Check the data transferred to item "0000000002" of the FI/CO document.
    Could anyone please help me with this.
    Regards
    SAP CO

    Hi,
    iam not able to understand of this  SAP Notes: 531606 and 1027645
    Could you pl give me full details for come out this problem.
    Regards
    SAP CO

  • Cost element creation

    Hi all,
    I'm exploring ways to create cost elements with batch input.
    In fact I need to generate cost element with category 90.
    Standard CO-settings (OKB2) are made to define a range of cost elements, but it doesn't let me define a range for statistical balance sheet account cost elements, the systems only accepts individual values. OSS note 890228 seems to confirm that OKB2 is not recommended to create cost elements of category 90.
    Because I need to generate a mass of cost elements of this category, I'm looking for another transaction.
    Thanks for your reply.
    Pascal

    Hye
    Upload the data using LSMW

  • How do I migrate Cost Element Groups in a batch ?

    I want to migrate Cost Element Groups from 4.7 to ECC6. We've been exporting/importing them individually, but is there a faster way to grab multiple groups and move them to the new environment ?
    One thing of note is that the Chart of Accounts is changing between 4.7 and ECC6 and named differently.
    Edited by: Joe Malloy on Feb 19, 2008 9:35 PM

    Hi ,
    You can go on createing the
    Controlling -Cost Element AccountingCost Elements--
    Automatic Creation of Primary and Secondary Cost Elements--Make Default Settings
    Create Batch Input Session
    Execute Batch Input Session
    BY do this activite u can do the mass process of creating the cost elements.
    Hope this is clear know assign points
    With Regards
    Krishna Singareddy

  • Capitalization of an investment order/project - Original cost elements

    Hi all,
    I do have a question concerning the capitalization of an investment order/investment project onto an asset under construction (AuC).
    I have configured the system in a way, using capitalization key and capitalization versions, that I can capitalize 100 % of the costs within the IFRS depreciation area to the AuC and 0 % of the costs within my local gaap depreciation area to the AuC.
    Instead of capitalizing the costs within the local gaap depreciation area, the cost are booked to the u201CAccount for capitalization differences/nonoperating expensesu201D.
    With the settlement of the investment order/investment project to the AuC the original cost accounts/cost elements (shared between IFRS and local gaap) are credited and the AuC is debited for the IFRS deprecation area and the u201CAccount for capitalization differences/nonoperating expensesu201D is debited for the local gaap depreciation area.
    My problem is, that I do not want to have the costs for my local gaap P&L on the u201CAccount for capitalization differences/nonoperating expensesu201D, I do want to have them instead on the corresponding local gaap cost accounts/cost elements to  the original shared cost accounts/cost elements within FI and CO. 
    Is there any possibility to do this within SAP Standard?
    (If possible the solution should also work within New GL, using multiple ledgers for parallel accounting instead of different account)
    Thank you!
    Regards

    Hi Prad,
    I am on 4.6C/D.
    Please check on your settings for Capitalization of AUCs created through Investment Support Measures: -
    1. Go to the IMG, Asset Accounting under Special Valuation and determine the Depreciation Areas you would like your Investment Support Measures to post to.
    2. Still in Special Valuation, define an Investment Support Key and assign it to the relevant depreciation area
    3. Also, define the relevant account determination for such posting under the Special Valuation
    4. Proceed in the same area to define the Transaction type for the Investment Support Measure by changing any of the Standard ones in there in line with your requirements
    5. Now move back to IMG, Asset Accounting then Master Data. Here you go to the screen layout and pick the relevant asset class for AUCs. Get this logical feild group and pick on the item Investment Support. Proceed to define its feild group rule as optional at the required asset maintenance level (Main Asset and/or Sub Level)
    6. Leave the IMG and access the relevant AUC's Master Data from the User Menu. Click the tab Investment Support and insert the Investment Support Key you created in note 2 above
    7. Now capitalise the AUC. Should work

  • Default GL account (cost element) for external service contracts

    Hi everybody,
    question about GL being defaulted from contract for external services
    The requirement is to have GL (cost element) being defined per service sub item defaulting to work order. Account assignment is unknown,  because the costs might be settled later to cost center or AFE or else.
    You could default cost element either through material group (which doesn't enable cost element to contract) or with account assignment category 'K' or 'F'  which do not suit, cause the former requires cost center, that is unknown yet, whereas the latter requires assignment to order which doesn't make sense at all.  Theoretically, it could be done with acc assignment cat 'U' , but cost element is not enabled with that category..
    I was assuming that cost center which you are required to enter along with cost element while creating service sub item referring to some sort of internal accounting. The system also requires service sub item acc assignment category being aligned with requisition (which is 'F') and would in fact create PR referrencing actual work order number. But still, doesn't it make sense having contract referencing another order.. Also, we don't use default values for PM ext operation data.
    So, the question is how to accomplish the requirement with Unknown assignment category? what is the point of defining cost center in the contract in given circumstances? Is there any work around exists?
    Thanks in advance
    Sergey

    Hi,
    Try this: IMG -> Plant Maintenance and Customer Service -> Maintenance and Service Processing -> Maintenance and Service Orders -> Functions and Settings for Order Types -> Create Default Value Profiles for External Procurement.
    After that assign it to order type: Default Values for Task List Data and Profile Assignments.
    Regards,
    Rogério Reis

  • Finance Postings with incorrect cost elements assigned

    Hello,
    I am implementing the SAP Plant Maintenance Module (PM) at my Company and Iu2019m running into issues with the finance team regarding the finance (FI) postings during the material goods issue (GI) to the order (MIGO) and financial settlement (KO88) of all order costs.
    When a material is issued to the order via MIGO a material document is created with two financial GL postings; credit the inventory account and debit the material expense account. The posting made to the parts expense account contains a reference to a profit center and the PM Order. However my FI Group is saying the posting to the parts expense account must be accompanied by a Cost Center. My understanding of this is that the PM Order itself is an interim cost collector which is why itu2019s referenced in the posting and not a cost center. Knowing that once the settlement run is executed for the PM Order the costs collected in the order will be settled to the appropriate cost elements. Once settlement occurs the FI postings are generated for the materials and the costs are moved to the cost center of the equipment/PM Order. The two material postings generated are; credit to the material expense account (offsets the G.I. posting above) and a debit to the expense account along with the cost center of the equipment. The debit posting to the expense account is the posting that carries the cost center assignment and the one which I believe my finance team is looking however as I said above they expect the cost center assignment in all postings to the parts expense account.
    Can anyone tell me what the SAP Standard approach is for CO postings during a Goods Issue to a PM Order and the CO postings for materials during settlement? Is it possible to post to a cost center and PM Order at the same and for what business reason would this be done?
    Thank you,
    Mike

    Hi,
    Spare parts or components are the company assets. So while issuing those components for consumption, asset account for materials would get value reduced & expense account for the material would get value added. Here no picture for Cost Center.
    Only while doing the settlement, cost center will come into picture by getting the value from order to the Cost center.
    Regards,
    Maheswaran.

Maybe you are looking for