Mass Infoobject reactivation timing out
hello all
my transports have been failing due to inactive infoobjects (huge number of iobj which are inactive) and i have used rsdg_iobj_activate program to reactivate all my infoobjects. But after the program ran for a while it timed out ..is there a work around for this ?
Your suggestions are appreciated.
Thanks
Kamal,
When we get any Timeout error, only option is we can schedule as Back ground Job or split the work into peices.
Regards,
Nagesh Ganisetti.
Similar Messages
-
Request timed out because there has been no reply from the server in 600000
Issue:
Request timed out because there has been no reply from the server in 600000
Scenario:
1. All the crystal reports are designed by using Crystal Report 2008 Version -- 12.3.0.601
2. All reports are uploaded to CMC (SAP Business Objects Enterprise XI, Product: 12.1.0)
3. using Front-End .net Winform
4. Crystal Report is binding is done using Business View Manager (since having more than one databases)
5. Business View Manager Connects to Oracle using "Oracle Server" connection
6. Loading reports as follows
string queryString = string.Empty;
SessionMgr sessionMgr = new SessionMgr();
EnterpriseSession enterpriseSession = sessionMgr.Logon(userName, userPassword, serverName, authType);
EnterpriseService enterpriseService = enterpriseSession.GetService("InfoStore");
InfoStore infoStore = new InfoStore(enterpriseService);
enterpriseService = enterpriseSession.GetService("PSReportFactory");
Object psrfObject = enterpriseService.Interface;
PSReportFactory psReportFactory = (PSReportFactory)psrfObject;
queryString = "Select SI_CUID, SI_ID, SI_NAME, SI_PARENTID From CI_INFOOBJECTS " + "Where SI_PROGID='CrystalEnterprise.Report' " + "And SI_ID=" + ReportId;
InfoObjects infoObjects = infoStore.Query(queryString);
InfoObject infoObject = infoObjects[1];
ReportDocument crDoc = new ReportDocument();
crDoc.Load(infoObject, enterpriseSession);
7. All the reports are getting loaded properly and i am able to dynamically set the report parameters
8. After executing report, some of the reports take more than 10 minutes, due to which shows following error
Request timed out because there has been no reply from the server in 600000
Note i have done following:
1. I have checked stored procedure running through oracle for more than 10 minutes (1 hr, 2 hrs)
2. Tried simply running crystal report without front-end running perfectly more than 10 minutes (1 hr, 2 hr)
3. When i run .net winform application for specific reports which takes long time, gives "Request timed out because there has been no reply from the server in 600000"
Also i have done lot much R&D and spent almost weeks to get resolution but not getting any solution out of it, please help me in this case
HKEY_LOCAL_MACHINESOFTWAREBusiness ObjectsSuite 12.0Report Application ServerClient SDKCorbaAdapterWaitReplyTimeout = 600000 and HKEY_LOCAL_MACHINESOFTWAREBusiness ObjectsSuite 12.0Report Application ServerInprocServerEnterpriseRequ
AS per following URL
Session timeout
1. Log into Central Management Console
2. Go to server,right click on Crystal report processing server and select properties,change the idle connection time out to 60 minutes
3. Also right click on crystal report cache server and select properties ,change the idle connection time out to 60 minutes
4. Restart Crystal Report Processing Server and Crystal Report Cache Server
5. Change the session time out to 60 minutes in web.xml of INfoviewApp,InfoViewAppAction,PlatformSerivces and CrystalReports.
6. Navigate to the following location
<BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppWEB-INF
7. Edit the web.xml in notepad and search for the below lines.
<session-config>
<session-timeout>20</session-timeout> <!-- 20 minutes for session objects -->
</session-config>
8. Increase the Session-Timeout parameter to 20 to 60 minutes in web.xml . Save this file
9. Repeat the same for the web.xml file in the InfoViewAppActions folder in <BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppActionsWEB-INF
10. Repeat the same for the web.xml file in the PlatformSerivces folder in <BO Install Dir>Business ObjectsTomcat55webappsPlatformSerivcesWEB-INF
11. Repeat the same for the web.xml file in the CrystalReports folder in <BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppActionsWEB-INF
12. Restart the tomcat server
Still i am getting same error, please help me, if you have any idea, clue with respect to this error on winformThis error is specific to RAS. The default CORBA request timeout is 10 minute = 600000 ms. When the RAS SDK does not get the reponse back from RAS server in 600000 ms it throws this message. Why it works in InfoView\CMC what I believe you refer to as "Front End' application is because InfoView\ CMC don't use RAS.
1. First make sure that a smaller report wich runs pretty fast ( 1-2 min) works. This will confirm that there is no connectivitiy issues between RAS and RAS SDK.
2. If you get the efrror for every single report, even the smaller ones, make sure the box running RAS and RAS SDK code( in case they are 2 different) can ping each other with IP, shortname and FQDN. If there is a firewall between them, the RAS port needs to be opened for bidirectional communication. By default RAS chooses a random port for communication with SDK but within CMC you can configure it to use a specific port and open it.
3. If the issue is specific only to reports that are long running, typically more than 10 minutes, then you need to inclease the CORBA timeout to a value more than what the reports typically would take to process. This is done on client code side or IIS in this case.
Here are the steps:
Make the following changes on the application server/system.
Open RegEdit by going to Start > Run and typing in regedit.exe. Then click Ok.
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Report Application Server\Client SDK\CorbaAdapter
Change the value of SendRequestTimeout(ms) to 100000.
Change the value of WaitReplyTimeout(ms) to 6,000,000 ms. The default value is 600,000 ms and may not be long enough.
Restart IIS by going to Start > Run and typing in iisreset. Then click Ok.
Retry the failing application.
See note: 1296656
This error should be easy to fix
Edited by: Aasavari Bhave on Feb 2, 2012 11:20 AM -
Hi,
I am trying to run a report using BOXI sdk (11.0.3300.0) dlls VS 2003 NET application.
Using RASReportFactory and reportclientdocument.
I am able to create Enterprise session and also able to get InfoObjects from BOXI server.
When the code reaches to opendocument of rasreportfactory..I get following error
Request timed out because there has been no reply from the server in 600000 ms.
The report is not very simple and run fine and fast from Infoview/CMC
I tried different ways to run the report ReportDocument, ReportSource besides RAS but everytime when I try to openDocument I get the same error.
EnterpriseService svc = enterpriseSession.GetService("RASReportFactory");
ReportAppFactory rptFactory = (ReportAppFactory)svc.Interface;
ReportClientDocument rdc;
rdc = rptFactory.OpenDocument(myInfoObject.CUID, 0);
Any help is appreciated
ThanksHi,
Unfortunatley I couldn;t get hold of any packet sniffer tool. I need to get persmissions to install such software and its time consuming in our organization.
I followed the steps in the document for the firewalls you pointed me to. Tuened out that its a firewall issue.
1) Opened REGEDIT
2) went to HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\CER
3) Changed the following values
RequestPortLower from 0 to Decimal 1395 (5013)
RequestPortUPPER from 10000 to decimal 1395 (5013)
4) Went to Control panel/Windows Firewall
5) Created an exception Added name : "RAS test", Port no : 5013
6) The when I ran my test application from IIS (it started working
without timeout error)
Note:
Both my test applications (2005 and 2008) worked fine hosted from IIS of my local machine.
7) I still need to test my actual application. ( I think it will work too)
Now my question is:
The above things I performed on my local machine.
I will be deploying this application on our webservers in DEV
environment.
Our infrastructure guys are already installing BO XI R2 client on those
dev servers which will put all the BO XI R2 SDK related assemblies
(11.5 version )in GAC of those.
Do they have to open a specific port on those servers as I did above?
Are there specific ports we need to use?
At enterprise level the Infrastructure guys are never happy to open ports
and create firewall exception rules for them?
Any guidelines will be helpful
We are getting there..I really appreciate your help
Thanks -
Hi gurus
I am trying to run a profitability report in production if the range is for one month it is working but if the range is for 1 year the report is timing out
can anyone suggest me what would be the problem please.Hi
It is performance related issue. Try out this
Using less and complex cell definitions if possible.
1. Avoid using too many nav. attr
2. Avoid RKF and CKF
3. Many chars in row.
By using T-codes ST03 or ST03N
Go to transaction ST03 > switch to expert mode > from left side menu > and there in system load history and distribution for a particular day > check query execution time.
/people/andreas.vogel/blog/2007/04/08/statistical-records-part-4-how-to-read-st03n-datasets-from-db-in-nw2004
/people/andreas.vogel/blog/2007/03/16/how-to-read-st03n-datasets-from-db
Try table rsddstats to get the statistics
Using cache memory will decrease the loading time of the report.
Run reporting agent at night and sending results to email. This will ensure use of OLAP cache. So later report execution will retrieve the result faster from the OLAP cache.
Also try
1. Use different parameters in ST03 to see the two important parameters aggregation ratio and records transferred to F/E to DB selected.
2. Use the program SAP_INFOCUBE_DESIGNS (Performance of BW infocubes) to see the aggregation ratio for the cube. If the cube does not appear in the list of this report, try to run RSRV checks on the cube and aggregates.
Go to SE38 > Run the program SAP_INFOCUBE_DESIGNS
It will shown dimension Vs Fact tables Size in percent.If you mean speed of queries on a cube as performance metric of cube,measure query runtime.
3. To check the performance of the aggregates,see the columns valuation and usage in aggregates.
Open the Aggregates...and observe VALUATION and USAGE columns.
"---" sign is the valuation of the aggregate. You can say -3 is the valuation of the aggregate design and usage. ++ means that its compression is good and access is also more (in effect, performance is good). If you check its compression ratio, it must be good. -- means the compression ratio is not so good and access is also not so good (performance is not so good).The more is the positives...more is useful the aggregate and more it satisfies the number of queries. The greater the number of minus signs, the worse the evaluation of the aggregate. The larger the number of plus signs, the better the evaluation of the aggregate.
if "-----" then it means it just an overhead. Aggregate can potentially be deleted and "+++++" means Aggregate is potentially very useful.
In valuation column,if there are more positive sign it means that the aggregate performance is good and it is useful to have this aggregate.But if it has more negative sign it means we need not better use that aggregate.
In usage column,we will come to know how far the aggregate has been used in query.
Thus we can check the performance of the aggregate.
Refer.
http://help.sap.com/saphelp_nw70/helpdata/en/b8/23813b310c4a0ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/60/f0fb411e255f24e10000000a1550b0/frameset.htm
performance ISSUE related to AGGREGATE
Note 356732 - Performance Tuning for Queries with Aggregates
Note 166433 - Options for finding aggregates (find optimal aggregates for an InfoCube)
4. Run your query in RSRT and run the query in the debug mode. Select "Display Aggregates Found" and "Do not use cache" in the debug mode. This will tell you if it hit any aggregates while running. If it does not show any aggregates, you might want to redesign your aggregates for the query.
Also your query performance can depend upon criteria and since you have given selection only on one infoprovider...just check if you are selecting huge amount of data in the report
Check for the query read mode in RSRT.(whether its A,X or H)..advisable read mode is X.
5. In BI 7 statistics need to be activated for ST03 and BI admin cockpit to work.
By implementing BW Statistics Business Content - you need to install, feed data and through ready made reports which for analysis.
http://help.sap.com/saphelp_nw70/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
/people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
http://help.sap.com/saphelp_nw04/helpdata/en/c1/0dbf65e04311d286d6006008b32e84/frameset.htm
You can go to T-Code DB20 which gives you all the performance related information like
Partitions
Databases
Schemas
Buffer Pools
Tablespaces etc
use tool RSDDK_CHECK_AGGREGATE in se38 to check for the corrupt aggregates
If aggregates contain incorrect data, you must regenerate them.
202469 - Using aggregate check tool
Note 646402 - Programs for checking aggregates (as of BW 3.0B SP15)
You can find out whether an aggregate is usefull or useless you can find out through a proccess of checking the tables RSDDSTATAGGRDEF*
Run the query in RSRT with statistics execute and come back you will get STATUID... copy this and check in the table...
This gives you exactly which infoobjects it's hitting, if any one of the object is missing it's useless aggregate.
6
Check SE11 > table RSDDAGGRDIR . You can find the last callup in the table.
Generate Report in RSRT
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4c0ab590-0201-0010-bd9a-8332d8b4f09c
Business Intelligence Journal Improving Query Performance in Data Warehouses
http://www.tdwi.org/Publications/BIJournal/display.aspx?ID=7891
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
Assign points if t helps
Cheers
SM -
Troubleshooting help needed: My iMac keeps crashing and restarting with a notice: "Spinlock application timed out" What can I do?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports. -
Request timed out.- Error while opening a item in Blog
Hi,
We have a blog in our share point portal which was running properly before few days.
We get Request Timed out error while opening an item in the blog. The list contains about
3500 items
[HttpException (0x80004005): Request timed out.]
We were able to create a new item but not able to view the item.
When we check the server SQLSERVR.EXE takes more than 90% of the CPU Usage.
Please let me know how to resolve this issue.
Thanks,
VanithaHi,
According to your description, Please check the RAM allocated to your SQL server. MOSS server needs 2GB RAM
to preform well. SQL requires 2GB RAM for optimum performance.
Messages like this are mainly due to lack of RAM Allocation.
Best Regards
David Hu -
Hi
I am working on IBM AIX, Oracle 10.2.0.4 version.
Here I got the TNS-12535 error while running a report at particular time. (i.e 8:30 PM to 10:00 PM PST). But aftter this particular time it runs good.
There is no errors found in alert log file. The below is the error found in the sqlnet.log file.
Please help me to resolve this...
Time: 18-FEB-2011 17:05:53
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 78
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=host_name)(PORT=1521))
nt OS err code: 0
ThanksHi,
Nothing to investigate at the application side, there is everything to investigate at the network side.
Check the below points.
- is there any firewall in play
- is there any Network Address Translation into play
- have the correct ports been opened in the firewall
- is Oracle using random return ports (by default Oracle always uses 2 tcp/ip ports, the first one fixed, and configured in tnsnames.ora, the actual communication takes place on a radom port. If that is a problem at your site you need to fix that)
- You need to run netstat -r to identify which ports are actually used.
- Pavan kumar N -
I purchased 2 new email, adresses a few weeks ago. Both were fine but a few days ago I was stopped sending and stopped receiving emails on the one. The message comes up on my screen "connection to SMTP server (followed by my email adress) timed out. That does not mean a thing to me. What should I do please?
Thankyou.
I had been asked by ICANN some days ago to do something but I thought it was a scam so ignored it. Most other users I have spoken to have never heard of ICANN or been asked to 'register' with them or whatever. Anyway, post writing to you I have now 'registered' with them . When I now click on my incoming email adress it just says "failed to connect to server" but why it fails I do not know. -
As of yesterday, I am receiving e-mails fine; however, unable to send. Everytime I try to send an e-mail, I get "Sending of message failed. The message could not be sent because the connection to SMTP server (my mail address) timed out. Try again or contact your network administrator.
I received help from lunarpages (they host my domain); however, they were unable to resolve the issue. They suggested something is blocking IP, or need to update Thunderbird, or there's a firewall there...
Help!!!
My clients are waiting for responses to e-mails!
Thank you.To diagnose problems with Thunderbird, try one of the following:
*Restart Thunderbird with add-ons disabled (Thunderbird Safe Mode). On the Help menu, click on "Restart with Add-ons Disabled". If Thunderbird works like normal, there is an Add-on or Theme interfering with normal operations. You will need to re-enable add-ons one at a time until you locate the offender.
*Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates. -
I get the message" Your time has timed out" when i try to log on my apple id. Can you please help me?
I get the message" Your time has timed out" when i try to log on my apple id. Can you please help me?
-
Trying to update ipad2 software. Keep getting message that network connection timed out. Don't know how to cancel the firewall
Im getting the same thing...
-
Cannot login to Facebook on my iPhone 5 iOS 8.1 - Connection timed out - Error signing in
The other day, I had logged out of Facebook on my iPhone, and when I tried logging back in, it wouldn't let me. When I try to log in through the settings page, it stays on verifying for a while and says "Error signing in" and tells me there is no internet connection and when I try logging in through the facebook app, it says "Connection timed out" and asks me to make sure i have an active internet connection. The fact is my internet is working, and I can log in to facebook through safari, but not my app.
And one more thing. I have tried most of the methods mentioned in the forums. I have spent the last 2 days trying all of them from trying to create a new account using the old details, remove the phone number from facebook and try again, hard reboot by pressing the home and power buttons, resetting network and privacy settings, and reinstalling the app about 3-4 times. None of these work.
I'd be grateful if somebody can help me out with this .
Phone specs: iPhone 5, 16GB memory, iOS 8.1Dear Sir,
I did some research about your subject and I found these, please check it out
iPhone stuck on Apple logo!!! PLEASE HELP!
It may help you
<Link Edited By Host> -
When i try to update my iphone with the new software, it will give me a message that says connection time timed out, and then it says some other little things about a network not having a connection. i checked all of that and it is all fine. Im not sure why it is not working. i even restarted my laptop, all of my stuff is up to date. Does any one have any sollutions or any advice? Please and thank you!
This is asked and answered mnay times every day. The forum search abr is on the right side of this page.
Disable your firewall/security software. -
I am using iPhone 3GS. It is currently updated to IOS4.3. I am trying to update the OS to IOS5 on iTunes. It downloads the software, but it gives an error - network timed out. I have tried this multiple times. But, the end result is same.
Please help & advise as how I can upgrade the iPhone to IOS5.Temporarily turn off or disable your firewall and anti-virus software and try the download again.
Stedman -
How to download iOS 6 on iPhone 4??. Keeps saying "verification fAiled. Request has timed out"
Try try again. Thre server are heavily loaded. The connection dropped becasue the computer thinks it waited to long. Disabling your security software on the computer can help resolve this too.
Maybe you are looking for
-
Best Option (if any) for Load Balancing Distribution Point(s) on Same LAN
Hey Guys - I've got a simple question this time. We use SCCM 2012 R2, manage ~800 systems at 3 locations, but perform most work at our main office where this scenario takes place. Here, we have a single DP on-site which is a separate VM than our P
-
Deleting pictures uploaded from my camera
I used my iPod camera connector and uploaded pictures to my iPod while on vacation and now I have them in iPhoto, my problem is deleting them from my iPod now. When my iPod is connected to iTunes the only option available is to add/delete photos that
-
No Responsible Agent filled? workflow goes to all
Hi All, I am new to workflow. I am trying to fix a leave workflow issue. Issue is when ever the leave applied it goes to more then one manager. Even thou employee got manager in organisation. When I checked the workflow log, I found no Responsible A
-
Trouble on buying an iphone 4s online. please help!
Today i was going to buy an iphone 4s, unlocked, from the webpage, everything was alright, i was putting my information and so, but when i click order now, (or something like that) it said that my information wasn't valid, it mentioned something abou
-
System 9.3 Solaris 10-64 bit Vs 32Bit
<p>Hi All<br><br>For a same Essbase configuration and server/job setup, is their anybench mark that one could provide for 32bit Vs 64bit? We areplanning to upgrade to System 9.3 starting next month and wouldappreciate if somebody could help us in rec