Master data settings in Costing tab

HI
i have made settings in costing 1for SFG, FG , RM and packing packing material like this
i have selected with quanity structure and material origin tabs and profit center common and for sfg and fg variance key assign.
i have got a dout like as we are not doing costing for Raw material and packing material so if we dont select with quantity structure and do not cost tab in costing 1 what would be the effect in future.
i have tested in both scenario it is working fine, but which one is correct in order to avoid further correction in future as we are planning to upload master data.
thanks in advance
kareem

Hi Ajay thanks for reply,
But i have a dout
when i tick quantity structure tab when i do standard cost estimate for FG through CK40N all the raw materials are also get costed and the raw material are released with standrd price just like FG And SFG during costing run we can see the results of the costing run in costing 2 tab.
when we run standard cost it will take latest PO Price but when we issue the material to the process order does it consider any changes after costing run.
thanks
kareem

Similar Messages

Transporting Master data - New GLs,Cost Center and profit Center.

Dear Friends,
1. I have to create new GLs in Dev, Now i have to transport the new GL to Quality and Production. As per my knowledge, Master data has to created in DEV,Quality and Production.
please suggest, is there any t.code where i can transport GL from Dev to quality and production.
2. when Creation of the site, New Cost center,Profit center, Changes to standard hierarchy both in cost center and profit center hierarchy has to done in dev,quality and production manually.
Any suggestions where i can do only in dev and transport to quality and production.
3. After creating new cost center and profit center, i have to go to okb9, select the co.code,cost element and insert the new cost center and profit center in every cost element. This takes almost one hour.
Please suggest how to reduce this manually process.
All the help will be greatly appreciated.
Regards
Sridhar Reddy

Hi ,
Master data is to be created in diffrent clients as it is a non transportable object .
So in case of GL , cost centers you will have to again re run the LSMW which you had created for DEV .
Secondly OKB9 is a transportable object , so i dont feel there should be an issue in adding it to a transportable object .
In case of adding the values of tables in a request what you can do is create a request , go to SE01 open the request in change mode in the objects enter TABU and enter on the relevant entries that you want to transport .
But again one has to be very clear on what all table entries are to be transported , like SKA1 , SKB1 , SKAT etc. looking at the complexities and moving ahead with the standard way it is advisable to re run the LSMW in QUA and PRD .
Hope this helps .
Regards ,
Dewang T.

Equipment master data : address in "Location" tab

Hi experts,
Can someone tell me what the "address" data (in equipment master data, "Location" tab) are for?
What is an example of business case which will use that "address"?
Thanks,
P.

Hi,
It is the same address data that is available on equipment header (Ctrl+F5). It could be the address of where the equipment is located or where it operates. Alternatively it might be the contact details for the equipment owner or maintenance company.
It is similar to maintaining partners but you can use it as suits the business requirements.
-Paul

Master Data on Lot Size Tab

Hello Guru,
I need your help with regards to the master data set-up we have in APO. In tab Lot Size, the Procedure of our products is BY PERIOD, period type is W (weekly).
We are now having issues in the quantity recomended to received, as you can see we have 23 days as safety time, but the system is calculating to have around 100 days of coverage (days of supply)
if we compare inventory target in items on a weekly view, we should have around 150m items, and the system is calculating to have around 500m items
Does this set-up in master data is a factor? hope for your help.
FYI.
We check other code in the location that is ok, we see that in its master data Procedure = Lot by lot. And the other ok one is its Procedure = BY PERIOD, Period Type = D (daily)

It would be helpful if you explained which engine/heuristic you are using.
If you use lot for lot is the quantities exactly matching the demand?

Vendor Cash Discount Master Data Settings

Where is the proper area of the COA that a vendor discount account should be setup and what are its typical settings? Looking for specifics in the following areas:
Cost Element? Y/N
General Operating Expense Section of COA? Y/N
Auto-Posting? Y/N
Cash Relevant Flag? Y/N
Post w/o Tax? Y/N
Tax Category?
Any input would be greatly appreciated, thanks.

it will be set up in IMG tcode: OBXU (cash discount taken)
The set up for cash discount account in FS00:
Cost Element? Y/N >>> Yes, normally this is part of above GP in COPA (if you have COPA)
General Operating Expense Section of COA? Y/N > depends on your COA account grouping
Auto-Posting? Y/N > can be auto post or not, depending on the requirement if Finance won't allow any manual adjustment
Cash Relevant Flag? Y/N > No
Post w/o Tax? Y/N > Y in cases that the cash discount should not have tax
Tax Category? > just put "-" input tax

Master date maintenance for cost centers

Hi Experts
i want to create new variant in KS12, for mass change of department field in cost center . i want to add this field in variant but don't found how to add.
regards
MuR!

Hi,
If you wants to new field to the variant in KS12 Goto Envirnoment and Maintain list of variants there you can standard variants.. In those variants Department field is not available save as existing one and add department feild to the new variant and activate.
Under select variant from dropdown list and execute and there is an option f8 other list variant from that list select new variant and you can insert or change department field.
Thanks and Regards,
padmaja

Updating Standard Cost for an Item in Item Master Data

How do you change the Item Cost field under the Inventory Data tab in Item Master Data if Standard Cost is selected as Valuation Method. This field is greyed out.

Hi ,
If you have an inventory in the warehouse , you cannot change the item price of the standard cost .
So it is greyed out .Once you donot have inventory ,this field becomes active and you can enter the price .
Second option is from Item Revaluation .
Please test it in test environment
Thank you
Bishal

Creation of asset master data

hi sap gurus,
i have a problem regarding saving of asset master data.
while creating asset master data,-in time dependent tab the cost center it is comming correctly.but when i am saving it is giving ,the following error:
you cannot save the asset(correct depreciation error)
Diagnosis: you have choosen the function save.the system found an
internal problem when calculating depreciation for a check document.
sys responce:The asset cannot be created
procedure:1 check the error from depreciation calculation by
performing the function "Test doc.'again.
2 if you cannot correct the error ,contact your sys specialist.you
must then cancel your current processing.
please help me regarding the problem......

hi
check your depreciation area settings for the asset class

What is the use of factoring indicator in Business partners master data

Hi All,
I am the biginner to SAP B1.please help me.I am creating the businee partners master data in that general tab factioring indicatior is there.what is need for that?

Hi,
Please refer to Note No. [593657|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=593657]
Symptom
What is the factoring indicator?
Other terms
factoring indicator, factoring, indicator, business partner, master
data,
Reason and Prerequisites
Solution
Factoring indicator
The factoring indicator is used in Reporting => Accounting Reports => General Ledger.
If a factoring indicator has been defined for a Business Partner, it
will be entered automatically into each Journal Entry that will be
posted for this BP.
In Reporting => Accounting Reports => General Ledger, you can
click on the "Expanded" pushbutton, check the "Indicator" button, select "From" and "To" and the system will only display the transactions which include the selected indicator.
This field is for the so-called subrogation, which means
demands to BPs are sold to the bank.
Through this field you can allocate an assignment code to
a Business Partner, this code can be used in an accounting reports.
This functionality is only intended for Austria.
Also, following information from the Online Help (F1)
Factoring Indicator
Assign a factoring indicator for the business partner. Note that both code and name are displayed.
This indicator is automatically inserted as default value in the invoice. The factoring indicator may be displayed in the account statements.
Choose to open a Choose From List window displaying the indicators that have been defined. Choose New to define new ones.
The indicator is only displayed after activating the field Indicator in Personal Settings.
Regards,
Jitin
SAP Business One Forum Team

Factors in Item Master Data

Hi all,
Can any one Please let me know,what is the Usage of Factor-1,2,3,4 Fields in Item Master Data (Purchasing and Sales Tabs).
I just want to know in which scenarios we can use them?
If anyone could explain the same with practical example,it would be helpful.
Thanks & Regards,
Ravi Patil

Dear ,
Factor 1, Factor 2, Factor 3 and Factor 4 Fields for Purchase and Sales
The quantities of certain items must be calculated by multiplying
several factors. In the factor fields, you enter the multiplication
variables. For example, a 1.20 m high fence, which is sold in meters, is
in stock. The price for the sold quantity is, however, based on square
meters. To calculate the quantity (that is, the surface area) on which
the price is based, the system must multiply the sold length by the
height of the fence.
In this case, the length of the fence is determined with factor 1 and
the height (in the example here: 1.20 m) with factor 2.
The system automatically sets all the factors to 1. You can enter any
number of factors, or none at all. The entries you make here are copied
to the business transaction documents in Purchasing and Sales. You can
overwrite the factors in the row information.
Note: If you use the factors for a large number of your items, you can
use the settings for the transactions in Purchasing or Sales to display
the fields directly when you enter the document. In this case, you do
not need to call up the row information to change the factors.
You could also find some information from online help.
Regards
Apple

Master Data(texts) not displayed in Query/Analyser

Hi ALL,
I hv master Data's like Cost center,Cost element,vendor,Customer, for which the data is displayed only as key and no text is displayed,even though i hv selected key and text option,,also i hv checked their corresponding master datas,,i c that all the data has been loaded respectively.
Please advice on how to solve this...asap
Thanks

Goto RSA1 and double click on the infoobject.
Goto the Business Explorer Tab and make the Display Option as Key and Text.

How to use Master Data Attribute of in Update Rule's Formula

Hi experts.
In update rule, there is an option to use Master Data Attribute of. However, due to user requirement, I need to use that in Formula instead.
Field to update:
Profit Center
Logic:
If Cost Center is empty
Then Profit Center
Else
Master Data Attribute of Cost Center
I use the following formula at the moment but it is not 100% correct.
IF( Cost Center = '', Profit Center, Cost Center )
Appreciate if anyone could help me out.
Thanks!

Hi,
The easier thing to do will be to use a Update Routine.
Logic will be as follows :-
If Cost center iss initial.
Result = Profit Center
else.
result = Cost center.
endif.
Regards
SM

Issue with Master data change workflow in GRC PC 10.1

Hi,
I have configured the work flow for master data changes in GRC PC 10.1, however approver is not able to view the request in inbox where are the organization owner is able to see the review for change request in inbox.
Please let me know if there is any config where we need to set the approvers for workflow, so that the system creates a request for approver.
Regards,
Giridhar

Dear Giridhar,
Please, check the following configuration:
1. Activate the workflow (Path: SPRO -> GRC -> Shared Master Data Settings -> Activate Master Data Changes)
2. See whether Checkbox "Approval" is ticked for the selected entity
3. If you activate master data changes, please check whether the correct roles are indicated in the Maintain Custom Agent Determination Rules in the Workflow settings.
Business Event: 0FN_MDCHG_APPR
Role: Select the role you gave to the approver
After performing this configuration, a task must appear in the work inbox.
Best Regards,
Fernando

FI Master Data list

Hi,
Can anyone provide me with a list of Master Datas required to be prepared in the FI and CO modules? Any link for this kind of information?
(Will award points)

hi,
master data in fi i
gl accounts
bank
fixed assets
Also we have to give to mm wht codes for vendors plus fi-costing views for material
For sd we have to give terms of pay for vendor master data
If mm and sd is not implimented that is if only fi is implimented we have to gather customer and vendor master data.
In costing following is the master data
cost centre
Cost element
internal order
profit centre
I hope u r question is solved.
warm regards

Outbound IDOC not getting triggered while new master data is created

Hi Experts,
I am trying to trigger an outbound idoc for Cost Center master data when ever cost center is being created or cost center is being changed. (Usinf COSMAS)
I have successfully made use of change pointers and now able to trigger the idoc when ever Cost Center is getting changed. But while creating new Cost center, IDOC is not getting triggered.
I used the function module MASTERIDOC_CREATE_SMD_COSMAS for triggering the idoc.
Could one of you please let me what would have gone wrong? Since IDOC is getting triggered while changing the master data but not getting triggered while creating new master data.
Thanks in Advance,
Vinoth

Hello,
when you activate BD21 for a message type, it creates a entry in the SAP tables. that these Cost Centers have been sent already and any susequent changes to this will trigger a IDoc.
As for BD16, scheduling it wont help as, you need to specify the selection criteria, and i do not see how you will be able to dynamically get the selection criteria.
Try BD95, and BD59 to create a change pointer for a field, so when ever this fields is modified (new/updated) an idoc will be triggered.
regards,
Abhishek

Master data settings in Costing tab

Similar Messages

Maybe you are looking for