Material attribute assigned to a DSO field

Hello All,
A Material attribute needs to be filled with a field from the DSO and should not consider the value which it actually holds in the InfoObject Material.
Is it possible to assign this attrbiute without adding a individual field in the Cube?
Regards,
NK

Hi,
Write a routine in Transformation of Info Object to read data from active table of DSO. To ignore the value from source, nothing to do except not to map.
Thanks
BVR

Similar Messages

Follow-up material being assigned to another follow-up material

Hi,
I am trying to assign a follow-up material A to material B but get the following message:
Material B is already a follow-up material in plant X.
This is not a warning or an error message but I still can't save the changes.
I have tried to search for any other material that has material B assigned as a follow-up material but can't find anything.
How can I get around this?
Thanks

Dear Deeksha,
If my understanding is correct then I guess already material B itself is acting/assigned as a followup material for some other
material(say For example for material C in the plant X) and in return you are trying to assign a material A as a followup material
for B.
Check in table MARC for the plant X and for field NFMAT = B,identify for which material this acts as a followup material in plant
X.
Check and revert
Regards
Mangalraj.S

Material attributes in separate dimension?

Hi BW experts,
As a new member I have been looking for a similar topic but unfortunately I can't find anything on it so I was hoping one of you could help me out.
I want to redesign our stock/movement cube due to performance issues. One step is to have the 0MAT_PLANT as a separate (line-item) dimension as opposed to a charateristic of 0MATERIAL. I assume this will help a great deal since 0MAT_PLANT has over 8.5 M entries which does not really help to speed up any queries. (fact table has about 40M records)
Another thing is that I would like to create a separate dimension with 0MAT_PLANT navigational attributes like service level, ABC indicator etc. These fields are now in the material dimension and I reckon these nav attr blow up the dimension massively since one material has multiple service levels and ABC indicators. Can I just drag in these field into a new dimension, say Material Attributes and still have them in there as master data?!
In other words, can I create a dimension with only 0MAT_PLANT navigational attributes and what are the consequences of this?
Thanks heaps!
Cheers,
Niels

Thanks Pizzaman.
I do not think it will be a good idea to physically put the master data in the cube in my case so I have to keep it as master data.
Can you explain to me what happens when I take the following steps:
I take out the 0MAT_PLANT characteristic (which has 8.5M records) and create a separate (line item) dimension for it and I leave the NA for 0MAT_PLANT (like service level and ABC indicator) in the Material dimension.
Would this have any impact on the number of records to be read when I run a query for plant, material and ABC indicator?
Doesn't the query still have to read the 8.5M records which are now in the 0MAT_PLANT dimension instead of the 0MATERIAL dimension?
So does creating a separate 0MAT_PLANT dimension have any impact on query performance?
I do understand you point about the indexes and that might work.
Hope you can help me with this
Thanks.
Cheers

Material Attributes - cFolder

Hi All,
I could access Material Attribute file through webDAV and make the changes for additional material types..
There are many fields maintained in Material Master in R3 as Class and Characteristic values..
Is there any way to export these values too to cFolders when we export Material, BOM from R3
Regards,
Aby

Hi Ulf,
What kind of classification data would you like to export?
I need to explain the scenario, and am not sure the approach is correct
We are trying to map Agile PLM functionality here.. Ultimate aim is to export BOM as PDX package. For this
1) We are exporting BOM from R3 to cFolders using CFE02
2) From cFolders , extracting as PDX
When I went though customizing we have "Specify Field Mapping Profile for PDX Package Import and Exp"
Inside 0SAP_CFX Profile for Master Data Item , there are many XML attributes like
- Code of Lifecycle phase
- Product line
-Unique Label of Item
-Make or buy decision and many more
Where can we map these attributes in cFolders?
As the BOM's are exported from R3, we thought we will put the above attributes as CHARS in Classification
Regards,
Aby

No material group assigned to this value

Hello, I am trying to add new value to a purchasing organization in extended attributes about product categories.
When I add new value system throws an error message: "No material group assigned to this value", this material group is created in R/3 backend but not in SRM. How can I transport this value to SRM? Only 3 values not all data about material groups.
Thanks in advance
Rosa Rodríguez

Hello, I have this in the transactions that you mentioned:
r3ar2
Request Name: ESN
Adapter Object: DNL_CUST_PROD1
RequestType: Request: Objects could be loaded from R/3 backend / CRM DB
Use One with mark
Table: T023T
FieldName: MATKL
I/E: I Inlusive defined set/array
Opt: BT
Low and High: range of material groups that I want to replicate.
I put in transaction R3ar4 the request name and when I check on transaction r3ar3 this transaction is running and take long time .... I think there is a problem because are only 3 product categories
What can I do to check if the system failed or something similar?
Thanks
Rosa Rodríguez

Populating marketing attribute of bp in new field created by eew in crm

Hi all,
    I have created new field in transaction types(lead opp, quotation and order) through eew.
    how do i populate a value of a marketing attribute that i have maintained for a business partner(TABLE for marketing attribute:- AUSP) in the new fields created in all the transaction types.
    Can anyone help me in how to achieve this as it is an high priority issue for me?
    I have tried doing by writing a code in pbo of the screen in which fields are created but it gives me a dump at item level if item is maintained otherwise it works but item is compulsary.
Regards,
Rahul

Hi Rahul,
Check the BADI 'CRM_CUSTOMER_H_BADI'
Implement the method 'CRM_CUSTOMER_H_MERGE'
First of all select the data from the table.
Fill in the appropriate corresponding field in the structure 'CS_CUSTOMER_H_BADI',of the method, with the data extacted. Finally(very important), In the table 'IT_INPUT_FIELD_NAMES', of the method, append a line with the field FIELDNAME containing the name of the field in the Customer_h structure and field CHANGEABLE containing space.
I think this should solve your problem.

Message No F5808 Field Assign. is a required field for G/L Account.

Hi Guys,
I have a problem when releasing a cancel credit memo billing document.
It shows the following error message:
Field Assign. is a required field for G/L Account.
Message No. F5808
Diagnosis,
The value field "Assign." in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L Account XXXX in company code XXXX linked to the field selection for posting key "50".
System Response
Error
Procedure
It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Assign.". If this is the case, contact the consultant responsible for the application.

Hi,
The Assignment Number BSEG-ZUONR (I suppose "Assign." means it here.) field status for posting key and GL is optional and mandatory.
I think the GL Account SORT KEY in FS00 is the assignment selection for Billing to FI doc. Say if the SORT KEY is Posting Date, the assignment from Billing to FI Doc would be the date of posting.
But if the SORT KEY is blank ( This is case for my G/L account), the system will select the assignment written in Billing document header (VBRK-ZUONR).
I checked other billing documents, which are not in the same billing type as the one with error, and found it follow the above logic.
So how come this time it shows the above error? Really confused.
Emma
Edited by: qun yang on Sep 22, 2011 9:12 AM

Material Attribute value display based on cost center value

Hi,
Is it possible to display the material attribute value based on cost center value. I mean for some cost centers I would like to display the value of other characteristic in place of material attribute. I am trying to create a query on MP.
Any info in this regard will be appreciated.
Thank you.
Harshan

Hi Adi,
In Rows, Create a struture. Using New Selection, You can restrict the New Value to the cost center (Restrict again on those some cost centers) and material. And for this New Characteristic, you can have a attribute.

Copying one material attributes to another material thro' FM or BAPI

Hi,
My requirement is :
To copy a material attributes from one material(old) to an another material(new). Can anybody suggest a FM or BAPI for this?
Thanks,
Kaarthick

Hi,
These answers never helped me. I can reformat my quesion : Pls. suggest a BAPI/RFC/FM used to create a new material with reference to an old material.
Hope this is understandable one.
Thanks,
Kaarthick

The material account assignment group is missing in sales Order creation

Hi Gurus,
When creating the sales order the material account assignment group is not copied in the sales order line item.
For eg: when the sales order has 5 line item for one of the line item the material account assignment group is not getting copied.
I checked the material master - A/C assignment group was maintained.
I checked the revenue account determination every entry is maintained with respect to GL account.
But even though while creating the sales order the line item does not have account assignment group. Due to this i could not able to release the billing doc to accounting.
Please if any one can help in this regard to solve why the account assignment group is not copying in the sales order line item while creating.
Thanks in advance.
Jack

Hi,
May be the system is not updating the data. Try creating a new sales order to check. Also check the division of the product for which the acct *** grp is not showing.
Check whether the acct assgt group which you have maintained in the matl master and that in the acct determination (VKOA) is the same.
Reward points if solution helps.
Regards,
Allabaqsh G. Patil

Problem in assigning date valje to field

Hi,
I have a problem in assignning date value to field.
i am retriving date from a table and assigning it to a field which is date type in the form.. but it is not reflecting..
Error: form Bad Value..
how to assign the date values in the form..
Mahi

Hi mahendra,
I think the Bad Value Error Occurs only if the databound datasource in the form must have different data type...
oForm.DataSources.UserDataSources.Add("eDate", SAPbouiCOM.BoDataType.dt_DATE, 10);
SAPbouiCOM.EditText oEdit;
oEdit = oForm.Items.Item("1").Specific;
oEdit.DataBind.SetBound(true, "", eDate);
with Regards,
MadhuSudhana Rao.G

Custom Attribute not available in Available Fields section of Configuration

Hi Experts,
My requirement is to add a custom search field in contact search screen. For that i tried various options
Option1
Added a model attribute in component/view BP_CONT SEARCH/Search. The attribute got successfully added. But when i opened the Configuration tab, i could not see the attribute in the available fields.
Option 2
In the view CRMVC_SDESIGN, i created a new entry for my attribute in object type: BP_CONTACT and design object . But doing so, i got an error and was not able to add my attribute
Option3
Since the View context node 'Search' is bound to the Component Controller Context node 'Search'. I created my custom attribute in compoennt controller also. But this also did not help.
Option 4
I deleted the enhancement of the view and created a new enhancement. I created a value node in Search context node. But still the attribute is not available in the Availble Fields in the Configuration of component/view BP_CONT_SEARCH/SEARCH.
Kindly provide your valuable suggestions to resolve this issue.
Regards,
Radhika
Edited by: Radhika Chuttani on Jan 6, 2012 7:28 AM

Hi Radhika,
You need to enhance the search query structure as well in order to get the field in the configuration.
You can find the BOL structure for the corresponding context node bol model.
In your case, the BOL model is the search object 'BuilContactAdvancedSearch'.
The corresponding structure can be found at the BOL Model Browser, under Dynamic Query Objects
for the search object 'BuilContactAdvancedSearch'. The corresponding structure 'CRMT_BUPA_IL_CONP_SEARCH'
has to be enhanced with the new custom attribute. Only then, this field would be available in the configuration
when the following htm code gets executed when you open the configuration tab.
<thtmlb:advancedSearch id                = "advs0"
                                 fieldMetadata     = "<%= controller->GET_DQUERY_DEFINITIONS( ) %>"
                                 header            = "<%= SEARCH->get_param_struct_name( ) %>"
                                 fieldNames        = "<%= controller->GET_POSSIBLE_FIELDS( ) %>"
                                 values            = "//SEARCH/PARAMETERS"
                                 maxHits           = "//SEARCH/MAX_HITS"
                                 ajaxDeltaHandling = "false"
                                 onEnter           = "search" />
Here you can see that, it reads the parameter structure using the method SEARCH->get_param_struct_name( ) of
the context node.This is used for configuration as well.
Also if you have an F4 help for your custom attribute, you have to add it in the GET_DQUERY_DEFINITIONS( ) of the
view controller. These additional information will help you to understand better.
Regards
Leon
[SAP Community Network Forums on mobile|https://cw.sdn.sap.com/cw/ideas/7910]

Attribute Assignation in Rules File

Hi!
I am using a Rules File to automatic attributes assignation. The particular thing of this cube, is that the cube acept duplicated members.
The structure of the dimension is as follow:
- CC
-> CC1
----> E1
--------> C1
--------> C2
- Eje [Attribute Dimension]
-> Eje 1
-> Eje 2
The Rules File is as follow:
Level0,CC; Level1,CC; Eje1,CC
C1; E1; Eje1
The result of the execution of the Rules Files is as follow:
- CC
-> CC1
----> E1
--------> C1
--------> C2
-> E1 [Attribute: Eje1]
----> C1
I don't know what is the problem here, because the rules file don't search if the member exists in the structure and only create a new member with the attribute association.
Do you know what is happen here?

By attribute we are passing some extra information (like resourceBundle, unique etc) about property/item-descriptor etc.
you can refer below url:
http://docs.oracle.com/cd/E23507_01/Platform.20073/RepositoryGuide/html/s1605samplecompositerepositorydefinit01.html
-RMishra

One material type assign with multiple valuation class

Dear All,
One material type assign with the multiple valuation class.it is possible.what is defuclty for that.
pls, explan.
Regards,
Ranjeet

Hi,
ABC 3040 - spare mach BSX ( G/ L )- Goto OBYC and double click on the transaction key BSX and enter your chart of account proceed
val modifier(0001)-val class 3040--G/L account
XYZ 3041 - spare mach BSX ( G/ L )-Goto OBYC and double click on the transaction key BSX and enter your chart of account proceed
val modifier(0001)-val class 3041--G/L account
ABC 3040 - store consumable GBB ( G/ L )-Goto OBYC and double click on the transaction key GBB nter your chart of account proceed
val modifier(0001)-Account modifier VBR-Valuaiton class 3040-G/L Account(cr)-G/L Account (Dr)
ABC 3040 - repair and maintanance GBB ( G/ L )-Goto OBYC and double click on the transaction key GBB nter your chart of account proceed
val modifier(0001)-Account modifier VBR-Valuaiton class 3041-G/L Account(cr)-G/L Account (Dr)
Regards,
Deepak.

Import screen field value into search help assigned to a different field

Hi,
I have created an elementary search help based on a custom DDIC table ZSH_SHHLDR. Dialog Type: Dialog depends on set of values, search help parameters:
Parameter                       Import     Export   LPos SPos SDis
FOLIO                                X                       1       1         X
CERTN                                             X         2       2
where FOLIO and CERTN are fields in my table.
There are two fields in my program defined as like FOLIO and CERTN respectively. These fields are screen fields in a custom dynpro created using Screen Painter. The search help is assigned to the CERTN field. In the screen, I want that the contents of the FOLIO field should be imported into the search help, i.e. on the screen:
FOLIO: 21353
CERTN: <F4>
When I click on F4 help for CERTN, I want that the FOLIO parameter in the search help should contain the value for FOLIO that I entered in the text box on the screen. Is there a way to do this, through an exit for instance? Help is appreciated, thanks.
Regards

Hi,
You need to use the below statement.
process on value-request.
field zcom_doa_users-zzjob_role module sub_tes_module.
Here I declared three fields in the screen fields from structure zcom_doa_users. Try to name the fields with table name-field name. So inside the module in structure zcom_doa_users you will get given value for the other fields also.
Now you can do your own processing for f4 help.
Thanks
Subhankar

Material attribute assigned to a DSO field

Similar Messages

Maybe you are looking for