Material creation having 3 Dimesions in SAP

Dear All,
My client has ECC 5.0 and has a small apparel business associated with his main stream business. Client wants to have a mateial skew with all dimensions of the product..
Product: Bags. 
They have different sizes, Colors and Schemes in each color. All finished products.
How to create Material for such products..
Thanks in advance
Ravi

Ravi,
You can do this by material classification. Create class as Size, Color, etc.
Then while crating materials in classification view select class and give characteristics.
You only have to create one matrial.
Please take further help of MM consultant on this regard.
hope this info will help.
Thanks,
Raja

Similar Messages

  • Any component for article/material creation

    Hi All
    Is there any standard component for UI of articles/material creation in Webdynpro ABAP or SAP Floor Plan Manager?
    Regards
    Sunit

    Hi Aditya,
    There is a standard component for Sales order maintenance : LORD_MAINTAIN_COMP
    Note: It is also used to create / change /display the quotation/inquiry as well
    Regards,
    Rama
    Message was edited by: Ramakrishnappa Gangappa

  • Process flow of material creation

    hi sap gurus,myself rekha
    i want to know the process flow  of material creation-FERT

    Check below link .You have to use transaction MM01 to create material.
    https://www.google.com.au/search?q=process+flow+for+material+creation&oq=process+flow+for+material+creation&aqs=chrome..69i57.9710j0j8&sourceid=chrome&espv=210&es_sm=122&ie=UTF-8#q=process+flow+for+material+creation%2Bsap

  • EDI FOR MATERIAL CREATION AND CHANGE

    Hello all,
    I have a requirement that when a material is created it whole detial about that material is saved at a given location as idoc.
    ie EDI configration.
    How know to configure EDI process order. How can we do for material creation.

    Since we are not using any message control, we don't need to setup the process code in WE41.  
    The function module has already been assigned to the message type in WE57.          
    Step1: Create a logical system - BD54.
    Step2: Create a distribution model - BD64.
                     Create a model view and add the Sender (SAP ECC)  and Receiver (Logical System you created).
                     Then add the message type MATMAS.
    Step3: Create a RFC Destination - SM59
    Step4: Create a port and assign it to the RFC Destination created above. - WE21.
    Step5: Create Partner profiles - WE20
                       Partner type - LS
                      Message type - MATMAS
                      Basic type - MATMAS05
    Step6: Trigger the material material through BD10.
    Hope it helps.

  • Adobe interactive form for material creation

    Hi experts,
    I f an adobe interactive form for material creation was created using JAVA... what part is involved in the ABAP pgm.
    Thanks in advance

    Hi,
    Pleaes find the sample codes for WD Java...
    https://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d
    Regards,
    <i><b>Raja Sekhar</b></i>

  • Error on Material Creation.. XK01

    Hi Gurus... Am new to SAP Logistics & MM
    When i create Material master (XK01).. I get the following Error msg..
    E:0:001 Material shud start with zsan
    Pls help to solve this Error

    Dear All,
    For Material creation there are 2 option one is internal & exteranl No. range defined hope you syste mis comfigured with "ZSAN"
    External No. Range for Creation of Material So use the "ZSAN0001" for Creation of material.
    Else
    You can define the Material Master Number Range in transaction MMNR.
    Click the button Groups to Maintain the Material Type Grouping.
    Below are those material type that have no number range groups. 
    To assign a group, in the not assigned group, select the Material Type you want to group.
    Then tick the Group you want to assign and click the menu path Edit -> Assign Element Group.
    From the same screen, if you want a new number range intervals, click Group -> Insert Group.
    If you decided to used an external number range, goto transaction OMS2 and 
    tick the field External no. assignment w/o check.
    pherasath

  • PP-PI How can i generate two material creation(101) in a single operation.

    i am creating a process order for material fert material A having 2 operation in the recipe i want to carry out consumption of roh material b1,b2,b3 (261 mvmt) when i confirm order & i also need halb product generation C (101 MVMT) when i create GR.that is mb31. for first operation.the second operation has to consume material C.(which is produced from operation one) & consume d1,d2,d3 roh material & mb31 should generate halb material E & order header material A.
    HOW CAN U DO THIS?
    when i confirm first operation i can consume b1,b2,b3 & when i do mb31 for gr gainst then system generates both material,  A  & C & further possibility is not possible?
    can any one help me in this?
    pl. help asap
    thanks
    kareena

    Hi,
    Please check this link about co-products (co-product and by-product):
    http://help.sap.com/saphelp_46c/helpdata/en/89/a433e6461e11d182b50000e829fbfe/frameset.htm
    1. You have to write in your BOM both with negative sign.
    2. In case of co-product scenario you have to mark the co-product indicator in material masters of both BOM-header material and co-product (co-product is the material in the header's material BOM with negative sign) (co-product checkbox is on one of the MRP views...maybe on MRP2...)
    3. You have to mark the co-product checkbox for the co-product in BOM (select co-product BOM item in CS02 > menu > Goto > item...I don't know by heart but you can find on general data tab of the BOM item in CS02)
    4. Please define a proportion rate for BOM-header material and the co-product (it is in material master of header material > check the link)
    (in case of by-product step1 is enough)
    a) you can confirm BOM-header (mvt 101), by-product (mvt 531) and components (consumption, mvt 261) in CO15 / CO11N.
    b) co-product and BOM-header can be confirmed only in MB31 (mvt 101), components can be confirmed in usual way. No automatic confirmation is possible for co-product.
    Please use the search function of the forum in this issue to get more details.
    BR
    Csaba

  • Screen Exit for MM01 Material Creation

    Hi,
    The requirement is to add 2 new field in the Material Creation transaction (MM01) in the General Plant / Storage Location View.
    I was trying to find the Screen exit in the MGA Package but there was no screen exit for material. So, i tried by SPRO- IMG, iam able to attach my designed screen and its viewable in MM01 but the data is not being updated in the relevant table for the custom fields (The custom fields are appended in the MARC table).
    So, can you please help me about the coding part for the updation of the custom field data.
    Thanx

    Hi,
      Check these:
    MGA00001 - Material Master (Industry): Checks
    and Enhancements
    MGA00002 - Material Master (Industry): Number
    Assignment
    MGA00003 - Material Master (Industry and
    Retail): Number Display
    Check with 'BADI_MATERIAL_REF'
    Refer
    http://www.****************/Tutorials/ExitsBADIs/MM/MM01.htm
    https://forums.sdn.sap.com/click.jspa?searchID=7217830&messageID=3313524
    Regards
    Kiran

  • Material creation process in SRM-MDM

    Dear All,
    I am new to SRM. Please correct me about material creation procedure in SRM if I am wrong:
    Normally in classic/extended classic scenario, material first created in MM and then it replicated to SRM. Base on configuration setting for number range, system either create the product ID same as material number number in SRM when it replicated into SRM. In final steps, the product information will upload into MDM either XI integration or manually via excel upload.
    My question:
    + Is it possible to automatic create product without XI via T.Code - MDMGX in MDM.
    + If the replicated product ID of SRM is different then MM material number, which number we should consider for creating product
       MDM.
    Thanks in advance.
    BR
    Jennifer

    Hi Jennifer,
    Answer1) You can only replicate Product Groups, Currencies and Unit of Measures through t-code MDMGX. XI/PI is required for Contract and Product Catalogs.
    Answer 2) If the replicated product ID of SRM is different then MM material number, you should enter MM material number and in External Web Service Configuration for that internal catalog, uncheck  "Do not check Product" indicator so that SRM will not check the Product ID and when item goes to backend system, it will have correct MM material number.
    Thanks,
    Anshuk Saxena

  • Material Creation Using BDCs.

    Hi all,
    I have developed a program for Material Creation using BDC.
    Material is Being created and that is working well and good.Here i have a Requirement to update the Newly creted material in Ztable.So when i use call transaction mathod,i have written code for updation under the line CALL TRANSACTION.where in iam getting newly creatde material from MARA table,and so it is working perfectly fine..
    But our requirement should be sessions method,so when i use sessions method and exeute the program..we face the problem of updation.
    the piece of code for updation is updating previously created material.
    Literally speaking only the sessions are created ,when the program is executed,material is not created when program is run.Material is only created when the sessions are processed using SM35,
    So how should i do here,where should be the updation code written and where will we get the newly created material in sessions method..
    Pls Help me in solving this problem

    hai priyanaka it might be due to configuration problem
    bcos manulay also ur gettign this , so just consult ur MM consultant for soem setting
    regards
    afzal

  • Material Creation Date and Time

    Hi,
    Is there any place which stores the material creation date and time. We have checked table MARA, but that only has the creation date of the material, but does not give the material creation time. We have checked table CDHDR, but that only seems to have the material change date and time.
    From where can we retrieve the material creation date and time.
    Thanks and Regards,
    John

    Actually, CDHDR and CDPOS will have the value.  The CDHDR record will be marked as a 'U" record but look at the corresponding CDPOS record for MARA and it will be marked as an 'I' record.

  • Error in pipeline material creation

    hi,
    we want to create one pipeline material as per our new requirement for showing gas consumption.during material creation with mat type PIPE, it's showing an error:The field Profit Center is defined as a required field; it does not contain
    an entry.
    Procedure
        If the field is the material group or unit of weight, and the field is not ready for input, check whether the material is locked. If it is locked, you cannot extend the Purchasing view or the Sales view. If either of these views needs to be extended, the material must first be unlocked. This can be done only by a user with special authorization.
    thanx,
    sheetal

    Hi
    In your client if Profit center accounting(PCA) is activated ,then you need to maintain the Profit center for the material.
    Option 1: goto OMS2, got details of pipleine material & select the Costing View of the material.
    Now goto MM01 in creation of pipeline material & maintain the profit center in Cotsing 1 View.
    Deactivating the field from mandatory to optional will not serve your purpose as PCA will get affected.
    Thanks & Regards
    Kishore

  • Material creation date for perticular plant

    Hello Experts,
    I have four plant have a same material,so i want to see the material creation date by plantwise.Please suggest me where can i see the material creation date by plantwise? Bcz. I want to develop report for this.
    Thanks & Regards,
    Vinay

    Hi,
    Go to T.Code: MM60,Then enter your required plant and execute.
    Now you can see the material with created date or last change date  and who created.
    If helpful then reward.
    Regards,
    Biju K
    Message was edited by:
            Bijay Kumar Barik

  • Fast refersh materialized view having group by in it's select query

    Hi,
    Can any one please tell me from which version of Oracle we can create a fast refresh materialized materialized view having group by in it's select query.
    Regards,
    Koushik

    i dont know from which version this feature is started but I know that
    in 9i it works and we implemented for DWH projects

  • How to list material without having purchasing view ?

    hi, guru
    Is it possible to list all material without having purchasing view in material master ?
    Any recommend standard transaction to be useful except mm50?
    Is it possible to list in any table through transacation se16 ?

    Dear,
    There are 2 solutions for your query...
    1. Check table MARA , for the material maintenance status are present each alphabet depicts the views maintained
    A Work scheduling
    B Accounting
    C Classification
    D MRP
    E Purchasing
    F Production resources/tools
    G Costing
    K Basic data
    L Storage
    P Forecasting
    Q Quality management
    S Warehouse management
    V Sales
    X Plant stocks
    Z Storage location stocks
    2.Check table MSTA. There you will not only find the maintained views (PSTAT), but also the related org level (plant, storage loc, sales channel etc.)
    Regards,
    Syed Hussain.

Maybe you are looking for

  • Books in iTunes do not show up in iBooks

    I recently had to restore my iPad because I was having problems with my wifi. When I restored it, about 70% of my books/pdf's did not transfer over onto my iPad. I checked "sync all books" and nothing. Oh, and my wifi is still acting up and keeps los

  • Very slow broadband in Greenwich area

    Hi, My broadband speeds fell off a cliff recently. Been noticing disconnects in recent weeks, now getting speeds of about 350k upload on a line capable of 6.5mb. Help line is useless - tried to diagnose my wifi despite my explaining I was looking at

  • Error 1305: Data1.cab

    When I was updating my Adobe Reader to 9.3, it got to 99.9 then I got a message saying that I had to "Verify that the file exists and that you can access it." Well, it was in a folder on my desktop where it was supposed to be, I opened the cabinet fi

  • Start a call with a list with one click

    Hello. Don't know whether this is the right place, but: i've just created a list in Skype. What i hoped to do, is start a call with all the people in that list with one click. I'm using Skype on Mac/OSX, and can't find such an option (right clicking

  • How do I film singing with guitar?

    I have a Vixia HFR300 Canon camcorder. I use Adobe Premiere Elements to edit my videos. Next week I'd like to make a video of someone singing and playing the electric guitar. I have a lapel mic with a cord that attaches into the mic jack on the camer