Material Document 4916721050 does not inlcude an accounting doc. in MB03

Hi experts I encountered this warning message 'Material Document 4916721050 does not inlcude an accounting document' in tcode MB03 upon clicking Accounting Documents button. Here is what I did..
In transaction MB1B I entered the following values 976 for the movement type, IN3 for Plant, Storage Location is 5000 and then hit enter and then a new screen will appear and then I entered the next values...5005 for Iss. SLoc., 607431 Material, Quantity is 10, UnE is CAS, Batch is TEST2 and then I hit enter again but I encountered a warning message 'Batch TEST2 has already been posted in stock' and I attempted to hit enter and I encountered another warning message again 'For Batch TEST2 of material 607431 IN3, no class could be determined' and then I hit enter for the last time and then I was able to proceed successfully without encountering errors or warning anymore. Upon saving I was then able to generate material document 4916721050. When going to MB03 using the material document generated and mat.doc.year which is 2009 and then entered, an overview of the material document created will appear and then when I click 'Accounting Documents...' button then that's the time that I encountered warning message as stated above..'Material Document 4916721050 does not inlcude an accounting document' . I really need your help on this Please let me know if what went wrong and what should I need to do with this.
Thanks in advance,
Junne Ray

Hello ,
Materials valuation is done at Plant level or at company code level , generally its defined at Plant level
so if the goods movement is done between the storage locations of the same plant there will not be any valuation involved and hence no accounting will be created.
This query should be posted in Forum: ERP - Logistics Materials Management (MM) , this will help you
further.
Thanks and Regards
Shashank

Similar Messages

Material document 4900000006 does not include an accounting document

Hi guys
I created normal sales order, delivery and and released it thr VF01.
Then I created the RE document without order reference and PGR. But while checking the accounting documents in VL02N it gives the error as follows
Material document 4900000006 does not include an accounting document
Diagnosis
The system cannot find an accounting document for the material document 4900000006.
Possible reasons for this are:
The goods movement has no relevance to accounting. Therefore, the system did not generate an accounting document for the material document.
The material document is a document that was posted before Release 2.1. Such documents must be converted so that the system can find the relevant accounting document.
The procedure for the subsequent calculation of value is not active in your system. For further information, refer to the documentation on the program for valuating goods movements: RM07MWBU.
Procedure
Choose Continue and then choose another function.
Find out when the material document was created. If the document was created prior to the Release changeover, ask your system administrator to carry out the conversion of the documents. The individual steps required for document conversion are described in the Release Notes for Release 2.1B
Please give me the solution
Thanks in advance
Rahul

Hi Rahul,
Can you tell me how did you resolve this error indetail or step by step? I have a same error in test client. I am doing returns with stock catergory of E while PGI and then it throws error message.
Material document 4900000006 does not include an accounting document
Diagnosis
The system cannot find an accounting document for the material document 4900000006.
Possible reasons for this are:
The goods movement has no relevance to accounting. Therefore, the system did not generate an accounting document for the material document.
The material document is a document that was posted before Release 2.1. Such documents must be converted so that the system can find the relevant accounting document.
The procedure for the subsequent calculation of value is not active in your system. For further information, refer to the documentation on the program for valuating goods movements: RM07MWBU.
Procedure
Choose Continue and then choose another function.
Find out when the material document was created. If the document was created prior to the Release changeover, ask your system administrator to carry out the conversion of the documents. The individual steps required for document conversion are described in the Release Notes for Release 2.1B
regards
rc gopi

Loans document error Document header does not have a reconciliation key

Hi All,
I am trying to post a loans document through EK25 and while saving the document following erros is coming
Formal error: Document header does not have a reconciliation key
Message no. >0037
Diagnosis
You tried to post a document but a reconciliation key is missing from the document header. Since mass processing does not apply here (where the reconciliation key is automatically created) you must enter a reconciliation key.
System Response
Error message. Processing is terminated.
Procedure
Contact your system administrator.
Procedure for System Administration
If the program error occurred in an
SAP standard program, enter a problem message
Own program, correct the program
Any input appreciated.
Thanks,
VR

Hi,
You need to assign the reconcilation group to the SAP user ID you are using to post the loan document.
The reconciliation group is required if user-specific reconciliation keys are to be proposed automatically.
The reconciliation group is freely selectable.
Go to the following path in IMG-
IMG->Financial Accounting->Contract Accounts Receivable and Payable->Basic Functions->Postings and Documents->Document-.Define Default Values->Maintain Rules for Reconciliation Key Default Values->Maintain Reconciliation Groups for Default Values
Maintain the SAP User ID that you are using along with a reconciliation group.
After, you maintained the user ID and saved it, try to post the loan document again.
Hope it helps..
Thanks,
Amlan

Currency conversion - Line item total does not tally with account balance

hi guys!
we are currently going through currency conversion in Zimbabwe and we are at preparation stage. i have got 3 issues:
1. while trying to run program RFSEPA02 the following error is appearing-
   -Line item total does not tally with account balance
2. i might need to retrieve some FI documents whic were archived. how do i retrieve archived documents
3. i might also be required to delete(if its an option) some records so tha line item total will tally with account balance

put a break-point @
if t_balance_items_hw[] <> t_balance_account_hw[] or
     t_balance_items_tw[] <> t_balance_account_tw[].
    perform dequeue_account.
    message e099.
*   Summe der Einzelposten stimmt nicht mit Kontensaldo überein. ->
endif.
endform.                               " CHECK_ACCOUNT_BALANCE_2
and debug y it is getting the error.
Short text
Switch On Open Item Management by Changing Master Record
Description
This program activates open item (OI) management for a G/L account and makes the necessary changes to documents already posted. These are then displayed afterwards as open items. It does not process the open items any further. In reversed documents especially, it does not reenter clearing data in the document.
Requirements
No items can already be archived from this account.
Caution: Company policy must be in place to ensure that this does not happen.
Some G/L accounts cannot be managed on an open item basis, especially G/L accounts that are used in account determination for automatic transactions (for example, accounts set up for transactions MVA or VVA, or accounts which are posted to using posting keys set up for account type M).
Caution: Before making any changes, check that the G/L account can really be managed on an open item basis. If necessary, contact your SAP consultant.
The account must be blocked from posting since any new documents posted at the same time as converting documents and postings for this account would not be entered.
Output
When using the list log, each document that was changed is listed. In addition, the total of the changed BSIS/BSAS entries and the total of the changed documents is listed.
Regards
Prabhu
Message was edited by: Prabhu Peram

Category for material type MAT_KMAT does not exist for configurable product

Hi,
Trying to download Confihurable product from ECC to CRM,for this I am getting the below error.
"Category for material type MAT_KMAT does not exist"
For this , i have successfully downloaded the object DNL_CUST_PROD1, but still the material type MAT_KMAT does not exist under R3PRODSTYP in COMM_Hierarchy transaction.
kindly let me know how to get the material type MAT_KMAT under R3PRODSTYP .
Regards,
PV

Hi
Please go through the below pdf document. This will be useful.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9076a9a4-923c-2c10-7483-d997a9eae976?quicklink=index&overridelayout=true
Regards

HP Laserjet 1536dnf MFP document feeder does not work

HP Laserjet 1536dnf MFP document feeder does not work. I tried the suggested unplugged/plug and wait the required time but still no luck. Any suggestions? It does not even recognize that there is paper in the document feeder. Prior to this occuring, it used to say "document loaded"...now it says nothing. I do not even get an error message. It just does not work.

Hi @jdm328 ,
I see that you are having issues with the ADF not recognizing the paper loaded. I would like to help you out today.
It might be a hardware or paper sensor issue with the printer, not detecting the paper being loaded.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
I have provided a document with steps for cleaning the ADF rollers and the separator pad, to see if that will help.
'Document feeder mispick' Message Displays on the Control Panel and the ADF Does Not Pick Up Paper o...
Disregard the title.
Try to make a copy again.
If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

The document type does not match any of the given schemas

Hi,
I have created an envelope schema.To precisely process inbound envelope documents,in the xml disassembler component i have used the Documentspec and envelopespec properties.
in the properties i have the the schema name,Assemblyname
but i have got the error like The document type does not match any of the given schemas.
I have verified the schemas have deployed properly.
can you help me on this?

Hi Sujith,
As pointed out by Johns lot's of thing can cause this. You have to analyze lot of things, but this kind of error indicates that the message type that you are debatching is not deployed. For Example :
If you are debatching on Order than Order schema should be deployed in the admin console.
One more point that you need not to specifiy Documentspec and envelopespec properties until and unless there are multiple schema's of same message type deployed in different assembly. The dissasembler component will automaticaly disassemble the messages
just looking after the body XPATH.
Regards,
Rahul Madaan

Getting Error message ""This set top box does not match the account settings"

Just ordered a new wireless receiver for the bedroom. Installed it and now getting the following error "This set top box does not match the account settings". Service was suppose to be enabled on Monday the 4th, but I recieved the hardware early and turned it on. I've since rebooted and unplugged and tried everything to no avail. Any thoughts on how I might get this to work? Regards, Rick

your wireless receiver is misconfigured (dirty) and need to be scrubbed clean.
A tech (service visit) or tier 2 rep (phone or chat) can do this. The receiver needs to be unplugged, on the bottom of receiver is a GUI (long number) that will be needed to identify receiver, when instructed plug just the receiver in that gave number for, when that one is connected.
Your choice 4 hour appointment window, or time on phone , or chat.
If these have not been activated yet.... When screen comes up, depress OK on receiver, depress button on WAP, when the screen at receiver says try again, Depress OK button (remote or on stb) another screen for update, depress OK give about 10 minutes to load, reboot when checking depress menu to verify recordings, if no recordings menu not finished booting.
Set aspect ratio MENU, OPTIONS, etc.
should take about 20 minutes per receiver.

When I try to send photos over the internet now, it says it does not recognize my account or pssword. I have never had this problem before, so what can I do to fix it?

When I try to email photos from iphoto, I get a message that says it does not recognize my account or user name. I have not had a problem with this before, so why now? How do I fix this?

iPhoto Menu ->
Preferences ->
Accounts ->
Delete and recreate your email settings.
Alternatively, use Apple's Mail for the job. It has Templates too - and more of them.

HS.EXP does not take into account the Value member and the source

Hello,
The formula is put in the "Entity Curr Adjs" part of the Sub Calculate.
The expression is the following and apply for one entity (Holding method) I filtered previously and the ICP Entity has proportionnal method with 50% rate:
HS.Exp "A#5420.I#[ICP None].C1#REC.C2#[None].C3#[None].C4#Recla_IAS_Aut_RetS_5=
A#5340.V#[Contribution].E#Logista_E_TBCO.I#UTE_O.C1#CLO.C2#TotC2.C3#TotC3.C4#TotC4"
The data I would like to retrieve is the one in Contribution Value as I put on the source part of the expression.
And yet, the data I get is the one of the Entity Currency and Proportion Value, which is different because the ICP has proportionnal method (50%) and the Contribution value is the result of Proportion - Elimination values.
To sum up: I obtain a data of 50 instead of 25.
I checked that the data I see in my form corresponds to the source parameters but it seems that it does not take into account the Value parameter.
Could it be that it is not possible to use a Contribution Value source for an Entity Currency Adjs destination?
Thanks in advance.
Regards,
Julien

Hi,
I see another problem in what you're trying to do. First, let me state what you're trying to establish: you are trying to get a value from one entity (say A) to another entity (say B), be it at [Proportion], [Elimination], [Contribution], ...
My question is: how can you know that during the consolidation process, by the time your code runs on B, A has already been processed and [Proportion], [Elimination] are not empty (or contain values from a previous consolidation run)?
The answer is "You don't". Theoretically, you have no control as per the order in which entities are calculated/consolidated during the process. Even more complex is the thing that if you have a multi-core machine, more than one entities may run in parallel, but still you cannot force A to run before B. I have done some tests and I've seen that in a one processor setting the order that entities enter in the process of consolidation matches the order you have placed them in the consolidation tree in metadata. Still this thing is not documented as far as I know and therefore you cannot rely on this.
Finally, I have also seen that in a simple case (B pulls from A), if you run consolidation twice, then you definitely get correct values. By the time you make a change in A, you have to run consolidation twice again to make sure that you get the correct data. I believe that you see that what I'm describing is good for experimenting but not for releasing to a client.
I tend to think of such a design, as a practice to avoid.
--Kostas

How to ensure for material POs, TDS does not get deducted.

Dear Seniors,
Single vendor is supplying material and doing some service also. How do we ensure that for material POs, TDS does not get deducted.
Regards
KVKR

Hi kkvr,
As i see your requirement is to execute MRRL alongwith the performing a proper TDS deduction and also using single vendor.
There is no Standard SAP solution for this, as a workaround you will have two options for doing the same
Option 1 : Create a different vendor code then you can run mrrl for the vendor code one for service and another for material
The demerits of this solution is duplication of vendor code, which results in not having proper information for the SCM personnel for the purpose of vendor evaluation and vendor reconcilation
Option2:
you need to enahce the Purchase order at line item level with the a custom fields for the WHT tax code to be selected at the time of PO creation. For this you need to do a screen enahcement in PO and also at the time of providing the popup for selection it should only dipslay the wht codes available in the vendor master so that proper control on the tax code selection will happen.
The practical issues here is the po creation person should have the knowledge of the tds code which you need to see whether it is possible or not or you can also suggest that finance controller should be part of po release startegy to check these po's to ensure the correct tds code populated.
Further to this you need to also perform additional enahcement changes for the selected tds codes in the po it should be replaced at the time of mrrl transaction making other tds tax codes base as 0 or removal of tds codes not applicable in the exit.
This exit with the help of the abaper you will be able to find hte standard enhacements available for mrrl and code the same over there so that at the time of posting this will happen.
Further, to this while writing the logic you can also further stream line it as for material po's the tds not to be deducted at all so that user input for the material po's can be avoided and it is required only for service po's this disticntion you can do with the item category.
With this you can perform the enahncement with a minimal changement to achieve your purpose.
Do let me know if you have any quereies,
Regards,
Bharathi

Target does not currently support account discovery

What does the message "Target does not currently support account discovery" means?
I am getting it while using OPAM REST API to get the accounts from a given resource.
How can I make it support it?
TIA
Leo

I would suggest waiting a day or two. YouTube has their standard flash format that will play on a web browser, but they also have an h.264 format that will play on the iPhone. It may take some time before they create the iPhone version. Similarly, it may take some time for YouTube to post a high def version.

Sales document 187000001 does not exist

Sales document 187000001 does not exist
Message no. VB001
Can you please advice why this error occurs? I am creating sales order (RE) type with reference to actual sales order, during reversal process all the docuemnt generating but still not showing document deleted Archive
1. Sales order created
2. Delivery Generated
3. PGR Done
PGI Docuemnt not showing and
4. Billing Docuemnt Generated
Regards,
Vijay Sanguri
09324905500

I am creating sales order (RE) type with reference to actual sales order
First of all, this itself is wrong. Why you were creating return order with reference to original sale order. You should always create a return order with reference to billing document.
1. Sales order created
2. Delivery Generated
3. PGR Done
PGI Docuemnt not showing and
Again, I dont know why once you have done PGI, why you have created a return delivery ??
thanks
G. Lakshmipathi

Hello I have a problem with the iPhone 5 does not know the account activation lock

Hello I have a problem with the iPhone 5 does not know the account activation lock

You will not be able to access the device without the account activate lock password. IF you have the receipt and other proof of purchase you may have sucess with contacting apple and asking them for assistance. Depending gretaly on how much proof of purchase you have.
Good luck Friend.

Copy of Application does not show " My accounts" in search show

Hi
I am using CRM 4.0
I have copied the application CRMM_ACCOUNTS through blueprint application builder using save as
The new application does not show "My accounts" in search show
It is just showing "My favorites"
Can somebody please tell me the reason for it or how to bring "My accounts" in search show
TIA
Asad

May be while copying the application "My Accounts" is not copied.
But you can create one by saving the Query.
Seelct "My Account" in the Find DDLB while in adv search and save the query as "My accounts".
It will be added to the SHOW DDLB.
Cheers, Raj

Material Document 4916721050 does not inlcude an accounting doc. in MB03

Similar Messages

Maybe you are looking for