Material movements with serial no.- Report

Experts,
Is there a standard SAP report that lists all movements with serial numbers associated with the movements? Similar to MB51 but with serial no.
I understand an ABAP report could be written but would like to avoid it. Any help will be rewarded with points.
Thanks
UV

Go to SA38 and Execute Program "RIOBJK00"
Also you can write an ABAP Query using Table SER03 and MSEG instead of going for ABAP Report.

Similar Messages

  • BAPI to change material assignment with serial number (IQ02)

    Hi Experts,
    Please let me know the BAPI to change material assignment with serial number in IQ02. I am using BAPI_EQUI_CHANGE, but this does not work. Waiting for Your valuable inputs...
    Thanks in advance,
    Birendra

    Hello Birendra,
    Honestly, I do not have good experience with the BAPI for serialnumber change...
    would suggest to explore function module:
    SERIALNUMBER_LIST_UPDATE
    or
    SERIALNUMBER_LIST_SAVE
    Also run ST05 to trace what kind of data it passed to these function modules by running IQ02!
    Cheers
    Krish

  • Link of material movement with inspection type

    Hello Masters,
    I have scenario where component at shop floor will be segregated for inspection. The requirement is to do result/defect recording for those parts and if required then those parts need to be scrapped. So one way of doing that can be to move those parts to either blocked stock or QI stock (ideal option) or to specific storage location so that planning can be taken care of (if material are still in unrestricted then planning will consider those part as OK part and planning may fail). And to record result/defect we require inspection lot, which can be created by using above mentioned material movement.
    But problem is how to create inspection lot so that we can do result/defect recording for those materials and scrap those material.
    Please note that material master will have QM setup active (inspection type 01 - Goods Receipt Insp. for Purchase Order) and hence we can move material from unrestricted stock to QI stock only through QM.
    I am not sure if we should use inspection type 08 - Stock transfer inspection, as there can be many instances of material transfer within plant. And with inspection type 08 active, system will create inspection lot every time there is any material transfer.
    One way can be to create new goods movement only for this kind of transfer and new inspection type and link both together. So that when ever material is transferred using that particular goods movement, system creates inspection lot as well as material will be in QI stock. But I am not sure how this is possible or not and if yes then how this can be done.
    I know query was too long to read and I think I was clear enough to explain what the requirement is.
    It would be great if I can get some guidance from you masters at the earliest convenience as it is bit of importance.
    Thanks and regards,
    Devang

    Hi Devang,
    I guess this is Line rejection scenario. Correct me if understanding goes wrong. You have okayed the material against 01 inspection lot and UD has been given. Now you find this material defective on shop floor.
    I think the 2nd option suggested by marwadi sounds better. I suggest one more possibility, just check whether feasible.
    1.     Create quality notification Q2 type through QM01. While creating you can give references of original PO and material document, which fetch vendor name and material code automatically.
    2.     Record defects and all other required information in notification.
    3.     After this, you find an option in action box, transfer post unrestricted - >block . Click there. This will transfer the stock from unrestricted to block.
    4.     If you want planning persons should not consider this stock as OK, remove block stock from MRP stock availability check. As a result of which stock lying in block will not be considered as available stock.
    5.     From block stock you can send this material back to vendor through MIGO. Otherwise you can create return delivery from notification through action box also. Check what is feasible in your case.
    Here you need not create inspection lot, no need to use any user exit.
    Regards,
    Anand Rao

  • Material Movements with erdat

    Hi ,
    I am using 'BAPI_GOODSMVT_GETITEMS' to take all material movements.
    call function 'BAPI_GOODSMVT_GETITEMS'
        tables
          material_ra     = material
          plant_ra        = plant
          pstng_date_ra   = budat
          goodsmvt_header = header
          goodsmvt_items  = items
          return          = return.
    How can i use erdat instead of budat or is there any function to use erdat ?

    Hi,
    I dont think there is any BAPI which takes the ERDAT. You would have to filter the records after this BAPI reutrns the results.
    Other way is to Get the data from the database tables directly. The tables are MKPF and MSEG
    regards,
    Advait

  • Goods movement with serial numbers

    Hi,
    1. Is there any report or table where I can see goods movement of material with their serial numbers?
    2. Also in MMBE i can see 'On order stock'. I know this is PO open PO quantity.
    Now this open PO qty will not be there against any storage location. I got some stock on this status in some storage location.
    How I can move to 'unrestricted stock' status?
    Please advice.

    Hi
    Check these tables,
    SER00 General Header Table for Serial Number Management
    SER01 Document Header for Serial Numbers for Delivery
    SER02 Document Header for Serial Nos for Maint.Contract (SD Order)
    SER03 Document Header for Serial Numbers for Goods Movements
    SER04 Document Header for Serial Numbers for Inspection Lot
    SER05 Document Header for Serial Numbers for PP Order
    SER06 Document Header for Serial Numbers for Handling Unit-Content
    SER07 Document Header for Serial Numbers in Physical Inventory
    And in order to move On Order stock to Unrestricted you need to close those POs by doing GR.
    Hope it helps
    Rgds
    ramesh

  • Material Movements issue in BEX report

    Hi Friends
    We have one report which shows the report on the production date, batch number, number of expired
    products and non expired products etc. recently in R/3, people have changed the production date
    for few batches and now the BW report is displaying 2 production dates for the batches whose production date changed. the report is based on 0IC_C03. I need to display the production date of a batch when they first entered into the system and any changes to the production date to any batch should be ignored and should  not be pulled into the report. Hope to get quick help on this.
    Thanks,
    Prasasd

    Hi,
    Could you please tell me how do you know which production date is entered first for batch. I think this job is difficult or even it can do this will make impact the performance because system has to check again and again when you view report . I suggest that to make sure one batch only have one production date you should put production date as the attribute of batch and use it as navigation attribute in cube.
    Hope this helps.
    BRs
    TRUC
    Edited by: Hieu Truc Nguyen on Dec 4, 2008 8:43 AM

  • Not to allow material movements with qty in decimals

    Hi All,
    A material X is having the Basic UoM as PC(piece) and alternate Uoms as kg & EA .
    conversion factor is : 1 PC=1EA  &  1PC=1 kg
    I want to restrict the system from allowing the Goods Receipt / Goods Issue in decimals. eg: 0.6 PC
    Also, in production order if possible.

    Hi
    In Tcode CUNI, ensure no decimal places are maintained for all the PC, KG and EA
    Regards,
    Raman

  • Problem with serial Number in Inspection Lot

    Dear All,
    I have a typical problem that material is there in quality inspection lot and serial numbers are aslo assigned during 101 mvt. but when I am posting it to unrestricted stock system is not determine serial number and giving an error
    *Stock data of serial number XXXXXX not suitable for movement
    Message no. IO231*
    All configuration setting are also OK as this problem comes for the first time and previously we were able to clear inspection lots of that material easily with serial number.
    Any Idea to rectify that problem?
    Thanks
    Edited by: Ashu on Aug 9, 2010 5:54 PM

    Hello,
    Check with your serializing Procedure check the assignment in Work scheduling View for this material also check in Quality view
    for inspection type 4 for GR of Production order.
    Regards,
    JayaVimal

  • Display material Number with Serialization Number

    Hi,
    I have a materai with serialization and spilt valuation.
    If i wish to display particular material number with serial numbers under oner valuation type, which T code I need to use?
    Suppose under one valuation type C1 there are 10 materials, numbered with serial numbers, E.g. Material P1 with serial numbers 1 to 10 under Valuation type C1.
    I wish to display this list of serial numbers under that valuation type.
    Thnaks & Regards,
    Kedar

    Check IQ 09
    <i><b>U have to develop report for the details u want</i>
    Material -env.sr no -. Check

  • Stock transfer with serial number assignement. 309

    We need to make a transfer from Material to Material using the class movement 309 in IM, the problem is that one material is with serial number assignment and the other is not, both materials work with lot. When we try to make the transfer we get the error M7 174, the message is an error, and we change it to a warning, however, we still get the same error.
    In the process we really need to make this transfer because we sold this material in fractions and the serial number function don't let us move a material with decimals.
    Any one has seen the problem?
    Thanks

    Alex thanks for your answer, I tell you that as a first option we created two new classes of movement similar to the class of movement 561/562, but imputing to a different accounts, but we have activate the material ledger, the local currency is transferred without any problem , but the other currencies of the material ledger is transferred with the current exchange rate. We need transfer exactly all de currencies
    Our solution is make the 309 movement without the validation.
    Thanks
    Edited by: Luis Martinez on Feb 15, 2011 3:50 PM

  • Subcontracting child material issue with SO ref

    Hi all,
    As per the client business scenario we are using MTO for all production/purchase process, In between the production process the material also going to subcontract for some process and coming back as new material. As i mentioned earlier all material movement with ref to sale order only.
    So, the child material in SO stock, created the subcontract PO through MRP by using Item cat - L and Account Assignment - M, with child material, system is recoganising the subcontract consumption with ref to SO in 543 mvt type. but while sending the material from plant through 541 system is not able to recoganise (since there is no special stock assigned in value string OMJJ).
    How to make the Sale order reference as manditory while GI (541/542) and GR (101/102/543/544/545/546) of subcontracting.
    Request your valuable suggestions
    Regards
    Sridharan

    Hi,
    Please refer below link...
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a04ec1a0-c39b-2c10-6889-f6f69625f3f3?quicklink=index&overridelayout=true
    Kuber

  • Material Movement using BAPI with serial number.

    Hello,
    I am currently doing material movement using BAPI with serial number management, however in some case it works fine and in some cases it given and error message E213(IO). Unable to find the reason, when simulated the same it works fine for 200 serial numbers and gives error when going above 200 serial number.  The confusion is some times it works fine for 3000 serial number as well.
    Tried finding the reasion on every possible site. No results.
    Thanks in advance for some solution.

    Hello,
    I am currently doing material movement using BAPI with serial number management, however in some case it works fine and in some cases it given and error message E213(IO). Unable to find the reason, when simulated the same it works fine for 200 serial numbers and gives error when going above 200 serial number.  The confusion is some times it works fine for 3000 serial number as well.
    Tried finding the reasion on every possible site. No results.
    Thanks in advance for some solution.

  • Move of material with serial number in MB1B

    Hi
    I discovered something in our system. I wanted to transfer materials with serial numbers from one plant (one stock), into another (another stock) in MB1B. I wrote down the material number and the quantity then a window comes up where I could write the serial number. Or there was also a button saying u201Ccreate new serial numberu201D in this window. If I pressed this button and saved the material document, I was able to move the material in MM with a serial number which does not exist in reality. I look at MMBE and IQ03 to control this. Do you know how to prevent this?
    Thanks in advance,
    Esra

    Hi,
    In the serial number profile in customizing (Logistics Execution/shipping/Basic Functions/Serial numbers), you can set for each profile whether a serial number must first be created through IQ01 or whether a serial may be created in other transactions, like MB1B, VL31N or MIGO etc).
    MdZ

  • Movements of a material which maintains serial numbers

    Hi experts,
    Need to track the movements of a material which maintains serial numbers. Need to get data such as PO number, PO line item,  Material code, GR number, GRN date, serial number of the item, Goods Issue note, issue date and the text feild.
    pls note that the requirement is need to fulfill in a single report,
    eg: For the material XYZ we have raised a po namely ABC123
    the most important thing in this report is to get the GRN, Serial number and the goods issue note
    with the use of ITOB table i can get the serial number and with the use of MSEG can get the GRN
    problem is with the issue note
    ichecked with IQ 09 T code and using the history tab i can get the movement of that serial number
    but when you check the table which maintain data for the movement of serial number, they are maintained in structure and not in a table,
    therefore how can i get the required information
    pls assist to solve this, thanks in advance
    Sasika

    Check IQ09 Tcode.

  • Report For list of material Master with PO text

    Hi all,
    I need a report whether it is available in Standard SAP or a customized, for List of Material Master with their PO text.
    If any one can help, please reply to this theard.
    Regards,
    Kapil Kulkarni

    To get the material number combined with the PO text you will need the help of an ABAP programmer.  The programmer can create a report for you using the function module READ_TEXT in the function group STXD.  The tables to use are:
    STXH - STXD SAPscript text file header
    STXL - STXD SAPscript text file lines
    The selection screen should have at least the following:
    OBJECT - STXH-TDOBJECT
    NAME - STXH-TDNAME
    LANGUAGE - STXH-TDSPRAS
    TEXTID - STXH-TDID
    You find the information for these fields by going to the PO text entry screen and displaying the header information under Goto -> Header.  For materials, the object is MATERIAL, the name is "material number", the language is "EN", and the text ID is BEST.  You can use this program to get long text in lots of places like information records, purchase order texts, etc.
    Hope this helps.

Maybe you are looking for