Material Movements issue in BEX report

Hi Friends
We have one report which shows the report on the production date, batch number, number of expired
products and non expired products etc. recently in R/3, people have changed the production date
for few batches and now the BW report is displaying 2 production dates for the batches whose production date changed. the report is based on 0IC_C03. I need to display the production date of a batch when they first entered into the system and any changes to the production date to any batch should be ignored and should not be pulled into the report. Hope to get quick help on this.
Thanks,
Prasasd

Hi,
Could you please tell me how do you know which production date is entered first for batch. I think this job is difficult or even it can do this will make impact the performance because system has to check again and again when you view report . I suggest that to make sure one batch only have one production date you should put production date as the attribute of batch and use it as navigation attribute in cube.
Hope this helps.
BRs
TRUC
Edited by: Hieu Truc Nguyen on Dec 4, 2008 8:43 AM

Similar Messages

Issues with BEx Reports in SAP Enterprise Portal

Hello Experts,
I am facing issues with BEx reports integrated in portal. Below are more details:
Scenario 1:
Execute a BEx report in the portal, save it in 'My Portfolio' using 'Save As' button. Now open the saved report from 'My Portfolio'. Below is the issue for this scenario:
When I open the saved report, I get 2 error messages and 1 info message at the top of the report. They are as follows:
The metadata of 'ITE' 'TEMPLATE_PARAMETERS' are incorrect for parameter 'COMMAND_PROCESSING'
The metadata of 'ITE' 'FILTER_PANE_ITEM' are incorrect for parameter 'TEXT_WRAPPING'
Variables for characteristic Fiscal year/period[0FISCPER] cannot be processed
Scenario 2:
Execute a BEx report in the portal, save it in 'BEx Portfolio' or 'Favourites' using 'Save As' button. Now open the saved report and click on 'Send' button. As expected, the BEx broadcaster wizard should appear but, it shows '400 BAD HTTP REQUEST'. While if I open the report (not the saved one) and click on 'Send' button, it works.
Helpful pointers appreciated.
Thanks
Vikash

HI Suman,
I am not adding the report to favourite using browser favourite. Below is the flow:
Run the report in portal.
There is a 'Save As' button at the top of the report. When I click that button, I get a pop-up with 3 tabs for saving the report.:
Favourite
BEx Portfolio
My Portfolio
save the report in the favorites or BEx portfolio tab and then open it and press 'Send' button
BEx Broadcaster Wizard should appear but instead of that, it shows '400 BAD HTTP REQUEST'.
If I press send for unsaved report, then BEx broadcaster Wizard is shown.
Thanks,
Vikash

Strange performance issue in bex report

Hello Experts,
I have a performance issue on my bex report.
I'm running the report with below selection criteria and getting 'too much data' error.
Country : equals EMEA
Category: not equlas 13
Date : 02/2010 to 12/2010.
But when I ran the report for smaller date ranges the number of records are not exceeding 13000.
02.2010 - 06.2010 - 6,555 rows
07.2010 - 09.2010 - 3,671 rows
10.2010 - 12.2010 - 2,780 rows
I know excel can't fit more than 65000 records, but I'm expecting 13000 records for my wide date range which excel can easily fit.
Any ideas on this one will be appreciated.
Regards,
Brahma Reddy

Hi,
For Question 1:
In query designer Go to the Query properties and select the tab "Variable Sequence", here you can set the order of variables as per you requirement.
For Question 2:
There will be a option "Hide Repeated Key values", if you uncheck this option then you will have the values for each row even though the material values are same.
Note; if you are viewing the report in web or WAD report you need to make the same changes in the Web template also because the settings in the query designer will be overridden when you run the query in web.
Hope this helps.
Regards,
Rk.

How to remove the '#'symbols for infoobject movement types in bex reporting

Hi All,
I have a problem in Bex reporting. The problem is when ever executing the report that time some of the characteristic values is shown in layout '#' Symbols. i want to remove the '#' valuse in report.
is it possible please give me step by step procedure for how to remove the '#' Symbols in reporing layout.
this is very urgent please help to me on this issue.
Thanks & Regards,
Guna.

Hi Guna,
To achieve this issue, we need to replace the value of #, we need to change the description while retrieving the data from tables. So we need to write some ABAP code in SE38. Go to RSA1 transaction and go to Info objects tab. Then go to context menu for cProject Key Figures as shown below. Click on the Object Overview to get the overview of all the info objects. Here you can see the field names which are used to know the table names.
In SE11, type the table name in Database Table field. Now press F4, then you will get the next screen to select one of the P/Q/S/T tables.
Now click on the button rounded in the below screen to view the data in the table.
Now click the execute button or press F8 to view the records.
Now go to Tcode: SE38. Create a source code and give some program name for that source code. To write code, you need access key. Contact your BASIS for this.
Now write the below code for that particular table in which you want to change the value # to description Blank. In the below source code, we are updating particular table, setting the field as Blank where it is null or no value. Here the field will automatically get updated to # if there is no value or null.
update /BIC/PXXXXX set /BIC/ZXXXX = 'Blank' where /BIC/ZXXXXX is null or /BIC/ZXXXX = ''.
if sy-subrc eq 0.
write 'successful'.
commit work.
else.
write 'unsuccessful'.
endif.
OR
If this # is because of the missing master data than,
right click that IO -> maintain master
you will see first row as a blank.
whatever value you maintain in this row that will come in the report for all Not assigned # values of the master data in the report.
maintain it according to your requirement, save and activate the master data
Hope this helps u...
Regards,
KK.

Issue with Bex report - key Figures not populating correctly.

Hi Experts,
I am facing an issue with a Bex report. There are three key figures of data type DATE having "Dec - Counter or amount field with comma and sign" datatype. After executing the query, in the report, for some sales documents the key figure fields are coming as 'X' and rest others are coming correctly in the date format as mm\dd\yyyy.
When i check in the cube, these key figures shows values in decimal format and not in date format. The conversion is happening during execution.
Pleas show me some light on how to identify the cause of getting 'X' for some Sales documents in the report eventhough some are coming correctly.
Thanks,
Anamika
Edited by: Anamika Soni on Mar 12, 2010 10:48 AM

Hi,
The infobject has been defined with datatype "DATE" only. It has also been mapped from datasource to infocube correctly as these key figures are populating correctly for some of the sales documents in the report. It is not like that for all the sales documents the key figures are not converting properly.
Some Sales documents are not converting into the date fields but for some conversion happens properly in the BEx report. This is the issue.
Please guide accordingly.
Many thanks,
Anamika

Issue in BEx Report

Hi All,
Question 1 ) I have an issue in the variable selection screen, because i need to change the Variable field from 3 to 1 for e.g
1 ) TESTVAR1 (Material)
2) TEST VAR2(Vendor)
3) TESTVAR3(Plant)
Now i want to display Variable popup screen as shown below
1 ) TESTVAR3(Plant)
2) TEST VAR2(Vendor)
3) TESTVAR1( Material)
Please let me know how to fix it?
Question 2) In BEx Query, Report output for MAterial should be displayed as shown below
for E.g
Material                  Plant                    Qty
MAT100                 2222                    25
MAT100                 3333                    34
MAT100                 4444                    45
MAT200                 8888                    78
MAT200                 5556                    67
But now , data is displayed for MAT100 only once under Material section ,for plant 3333 we are not able to see the material , Please let me know how to fix the issue.
Material                  Plant                    Qty
MAT100                 2222                    25
                              3333                    34
                              4444                    45
MAT200                 8888                    78
                              5556                    67
Thanks & Regards,
Nithi

Hi,
For Question 1:
In query designer Go to the Query properties and select the tab "Variable Sequence", here you can set the order of variables as per you requirement.
For Question 2:
There will be a option "Hide Repeated Key values", if you uncheck this option then you will have the values for each row even though the material values are same.
Note; if you are viewing the report in web or WAD report you need to make the same changes in the Web template also because the settings in the query designer will be overridden when you run the query in web.
Hope this helps.
Regards,
Rk.

Material Movements Issue

Dear Friends,
I have prob in Reporting total Stock o a given day.
the Pro is
We intialised the data using 2LIS_03_BX
and the movements through 2LIS_03_BF
and we are not using revaluations UM.
Now for Ex the query is asking for inputs
Material, Plant(Optional), Keydate for Data Selection.
based on the key date for user enters (Example 01.02.2009 to 16.02.2009) we need to get the closing stock on 16.02.2009 and opening stock on 01.02.2009.
We have field Zclosing in which we have closing stock for that material on the day of trasantion.
I have more than 1 STORAGE LOCATION for every plant. at the end i need to get plant wise subtotal for both the storage locations(eX
PLANT     STORAGE     POSTING DATE     OPENING         RECEIPTS      ISSUES       CLOSING
          LOCATION                   (CALCULATED AS
                                         C+I-R)
                                                                                A101    1111           01.01.2009       10               10           5              15
        1111           02.01.2009       15                5           11              9
HERE SUBTOTAL(req)                      10               15           16              9
BUT I GET                               15               15           16              9(i TOOK LAST VALUE HERE)
        9999           04.01.2009        5               20            0              25
                       06.01.2009       25                0           11              14
HERE su-total(Req)                       5               20           11              14
*Iget                                   25               20           11              14*
plant wise total(Req)                   15               35           27              23
*But I get                              25               20           11              14*
How to report this. Please help me.

Hi,
Use Valuated stock qty - 0VALSTCKQTY Key ffigure and restrict with 0CALDAY and give constant value
31.01.2009, for opening stock, because 31 Jan 09 closing stock is oprning stock for Feb 09.
And then for Closing stock Valuated stock qty - 0VALSTCKQTY and restrict it 0CALDAY and give Variable entry by user or for testing gibe constant value 16.02.2009 and check it.
Check the values with ECC in MB5B and becasreful while executing it i ECC. Select Storage Location/Batch Stock and give storage loaction and dates and execute it. And check it with BW report Opening and closing stock in MB5B give Date from 01.02.2009 to 16.02.2009
Thanks
Reddy

Date Format Issue IN BEX REPORT

Hi Experts,
we are working on BW 3.5.
we have a ODS where data is uploaded through flat file and there are 5 to 7 date field all made of Z infoobjects.
So now the user is putting the data for these Date fields as 20110901 = 1st sep2011. but in report its coming as 09/01/2011
when i checked all the Z fields that are created for this date fields have reference character as Date
only one field is character so it is coming correct as given by the user
but rest all are appearing in different format . In ODS also the date is coming as 09/01/2011
now the user want all the data to be in the same format as given by HIM.
I cant even change the properties of these Z info object removing the reference info object 0Date and make them character string.
so now please suggest how to upload the date given by the user as it is without changing the format and also how to change the format for the back data as its flat file so No data can be deleted.
thankkkkkkkks

hello
Bex analyzer is an excel add-in. Date formats are based on your regional settings.
If you want to have a different date format in the sap gui then you have to change your user profile in sap system.
Flat file upload needs the date format in a database format (YYYYMMDD).
You can transform the date in the transformation step with rules or with a routine( abap coding).
Thank you
Yiannis

Material movements with serial no.- Report

Experts,
Is there a standard SAP report that lists all movements with serial numbers associated with the movements? Similar to MB51 but with serial no.
I understand an ABAP report could be written but would like to avoid it. Any help will be rewarded with points.
Thanks
UV

Go to SA38 and Execute Program "RIOBJK00"
Also you can write an ABAP Query using Table SER03 and MSEG instead of going for ABAP Report.

Display issue in Bex Report

Hi all,
I have a requirment in my report where in i would not like to display the -ve values as negative in the columns. I do not have the option to use NODIM() at the query level, because i am simultaneously switching between the column displaying actual values as well as being input ready. How can we eliminate the -ve sign from the values being displayed, so that the report display just the absolute numbers.
Kindly help.

Hey
Create Calculate KeyFigure where (YOURKF<0)(YORKF*-1)+(YOURKF>0)(YORKF).
I think in this way your will get absolute value
Aharon

BEx report : Time diff HH:MM average Issue

Hello Guys
below is my Issue with BEx report.
I have a table with has d1 and d2 and t1 and t2.
I want the diff between them in only HH:MM, using any of the function modules.
I have got the HH:HH value into my DSO.
Then I converted the HH:HH into HH:MM in the BEx.
Now my report requirement.
I want to display the report with yearly , monthly and daily information -
let say my boss wants to compare Average time ( HH:MM) between June and July of 2007.
the report should be
year ++++++++ month ++++++ daily ++++++++ rec#++++++++ diff
2007++++++++ June++++++++ 01++++++++ 123++++++++ 31.36
2007++++++++ June++++++++ 01++++++++ 124++++++++ 11.23
2007++++++++ June ++++++++ 03 ++++++++ 152 ++++++++ 18.21
2007++++++++ July ++++++++ 01++++++++ 157 ++++++++ 12.27
2007++++++++ July++++++++ 08 ++++++++ 124 ++++++++ 15.33
now when you look at the above report layout.....what i want is to display the average time ( diff) for month of june and july.
so the average time diff of the month of june will be ( total time / record count ). same for july.
so the result should be for
JUNE - (32.36 + 11.23 + 18.21) / 3
JULY - (12.27+15.33) / 2
also it should convert the decimals (MM) into hours after 60.
I am getting the sub total for month June as ((32.36 + 11.23 + 18.21) / 3).
Its not converting the MM in HH even after 60 Min. say for example its showning 40:67. but the correct value should be 41:07
hope you got my issue.could you please suggest the solution as to how can i get the correct value under the month sub- total.
thanks,
pratap.

Hello venku chittidi ,
Thanks for the reply.
But the User wants to display the values in HH:MM instead of MM.
would it be possible to calcuate HH:MM from HH:HH in the transformation.
thanks
pratap.

Unable to Open Bex report from SAP APO User Menu

Hi All,
I am an SAP APO consultant, and have not miuch expereice in BEx reporting. As APO uses Build in BI for reporting and pulling history from either external BW or R/3.
Now my issue all BEx reports we use are assigned ot my user menu and when I select a report, I would expect report to open but an excel sheet opens and closes and nothing happens. However I am able to open this reports from my desktop menu selecting Business explorer and Analyzer and linking my SAP system. I use Excel 2007 , Is this some compactibilty issue or is there anything I need to do?

Hi KV,
There's a couple of possible root cause why you dont see properly the Bex Report.
Can you share to me the APO version and the BW software component being used?
In case this is still in the 3.x, 4.x APO, I think, a separate BW add on is needed for you to run your BEx report properly. You can ask your basis team for this separate installation.
Btw, is this report working before, meaning was it pulled successfully already in the past?
Can you try doing this again in a separate workstation, as the BW add on is installed separately per workstation.
Its possible that this is also an auth issue that the user you are using is not capable enough to run BEx.
As of now, I have not encountered any Bex issue that is related with the Excel version, I have tried running Bex in Excel 2007 no issue also. I think it maybe more related with the OS you are using, if its in Vista already what I know is you need to add your excel as a trusted document before you can run bex fro Vista.
Let me think of other possibilities.
Hope this helps.
- Jeff

BW Macros for Advanced Formatting of BEX Reports

Hi BW Gurus,
Would like to bring to ur attention for a small solution which i have proposed for SAP Tech Ed. As a BW consultant, you would have come across a situation where you had to decide a reporting tool that was flexible, reliable, user friendly, less expensive and that can be used with less training but still have all the features of Excel.
Topic : BW Macros for Advanced Formatting of BEX Reports
Abstract : The workshop will help you to provide advanced formatting with Bex Reports. You will also learn how to add and retain Formats in Bex reports with BW Macros. Advanced formatting includes retaining of formats with excel shawdow boxes, automatic print settings, comments, hiding rows or columns, adding calculations, changing color, maintaining report titles. etc. The solution will help the business users/ power users to maintain different formats of a report without going for any 3rd party tools like Crystal or Business objects. As most of the business users are familiar with Excel, it would be easy for them to maintain or change the reports rather depending on IT for each change.
For additional details please have a look at this
http://www.netsaptech.com/sdn/BWMacrosforFormatting.pdf
If you feel that this presentation is going to help you dont forget to vote the presentation at sdn.sap.com for SAPTech Ed 2006 - Las Vegas.
For details on how to vote click the below link.
http://www.netsaptech.com/sdn/sdn.htm
Bio of the Author.
http://www.netsaptech.com/resume/MMDinesh_Org.doc
Regards,
Dinesh Mukundu

HI ,
Can you please send me the link where I can see the material for formatting of BEX reports...
I tried opening the link which u had sent i your post but it is not opening....
thanks,
Nip

Inventory Material Movement Report in R12.1.1

Dear All,
I am currently working in a implementation project. My client needs a Inventory Material Movement Report on Periodical Basis
Report Should show : Item Name, Item Desc, Sub Inventory, UOM, Opening Stock of that period, Receipts for that Period, Adjustments and Closing Balance.
Please suggest me how to go about this on the same. Please someone share the code if someone have any. What logic do i need to follow and where to pick the data.
It is show stopper for us now as we do not have any standard report.
Thanks,
Addy

Hi Aditya,
You can find all the information you need in mtl_material_transactions table. If you need code combination id too, you can make use of a standard view CST_INV_DISTRIBUTION_V. Other than these, you can join these tables for other info..
MTL_SYSTEM_ITEMS_B MTL,GL_CODE_COMBINATIONS GCC.
In MMT, use qty <, > 0 for receipts and issues. use group by to get opening and closing balances.
Regards,
Siva Kumar.

BEx Report Display - Transformation Rule Issue - Urgent

I have 2 fields one Key Figure : "Amount (Datatype-CURR / length-13)" and one Characteristics : "Indicator (Datatype-CHAR / length-1)" in the source system.
I need to display the Amount field with +/- depending on the Indicator field which has only 2 values S(Credit) and H(Debit) in the BEx Report.
How can I handle this issue. Please provide your suggestions.
Thanks,
Shekar

Create 2 Key Figures.
One restricted with S(Credit) and another restricted with H(Debit).
Create another canculated Key Figure and multiply with -1 for the u want to do.
Then add the 2 filed if you want to and display and keep the others in No Display.
Regards, Siva

Material Movements issue in BEX report

Similar Messages

Maybe you are looking for