Not to allow material movements with qty in decimals

Hi All,
A material X is having the Basic UoM as PC(piece) and alternate Uoms as kg & EA .
conversion factor is : 1 PC=1EA  &  1PC=1 kg
I want to restrict the system from allowing the Goods Receipt / Goods Issue in decimals. eg: 0.6 PC
Also, in production order if possible.

Hi
In Tcode CUNI, ensure no decimal places are maintained for all the PC, KG and EA
Regards,
Raman

Similar Messages

  • Link of material movement with inspection type

    Hello Masters,
    I have scenario where component at shop floor will be segregated for inspection. The requirement is to do result/defect recording for those parts and if required then those parts need to be scrapped. So one way of doing that can be to move those parts to either blocked stock or QI stock (ideal option) or to specific storage location so that planning can be taken care of (if material are still in unrestricted then planning will consider those part as OK part and planning may fail). And to record result/defect we require inspection lot, which can be created by using above mentioned material movement.
    But problem is how to create inspection lot so that we can do result/defect recording for those materials and scrap those material.
    Please note that material master will have QM setup active (inspection type 01 - Goods Receipt Insp. for Purchase Order) and hence we can move material from unrestricted stock to QI stock only through QM.
    I am not sure if we should use inspection type 08 - Stock transfer inspection, as there can be many instances of material transfer within plant. And with inspection type 08 active, system will create inspection lot every time there is any material transfer.
    One way can be to create new goods movement only for this kind of transfer and new inspection type and link both together. So that when ever material is transferred using that particular goods movement, system creates inspection lot as well as material will be in QI stock. But I am not sure how this is possible or not and if yes then how this can be done.
    I know query was too long to read and I think I was clear enough to explain what the requirement is.
    It would be great if I can get some guidance from you masters at the earliest convenience as it is bit of importance.
    Thanks and regards,
    Devang

    Hi Devang,
    I guess this is Line rejection scenario. Correct me if understanding goes wrong. You have okayed the material against 01 inspection lot and UD has been given. Now you find this material defective on shop floor.
    I think the 2nd option suggested by marwadi sounds better. I suggest one more possibility, just check whether feasible.
    1.     Create quality notification Q2 type through QM01. While creating you can give references of original PO and material document, which fetch vendor name and material code automatically.
    2.     Record defects and all other required information in notification.
    3.     After this, you find an option in action box, transfer post unrestricted - >block . Click there. This will transfer the stock from unrestricted to block.
    4.     If you want planning persons should not consider this stock as OK, remove block stock from MRP stock availability check. As a result of which stock lying in block will not be considered as available stock.
    5.     From block stock you can send this material back to vendor through MIGO. Otherwise you can create return delivery from notification through action box also. Check what is feasible in your case.
    Here you need not create inspection lot, no need to use any user exit.
    Regards,
    Anand Rao

  • Material Movements with erdat

    Hi ,
    I am using 'BAPI_GOODSMVT_GETITEMS' to take all material movements.
    call function 'BAPI_GOODSMVT_GETITEMS'
        tables
          material_ra     = material
          plant_ra        = plant
          pstng_date_ra   = budat
          goodsmvt_header = header
          goodsmvt_items  = items
          return          = return.
    How can i use erdat instead of budat or is there any function to use erdat ?

    Hi,
    I dont think there is any BAPI which takes the ERDAT. You would have to filter the records after this BAPI reutrns the results.
    Other way is to Get the data from the database tables directly. The tables are MKPF and MSEG
    regards,
    Advait

  • Material movements with serial no.- Report

    Experts,
    Is there a standard SAP report that lists all movements with serial numbers associated with the movements? Similar to MB51 but with serial no.
    I understand an ABAP report could be written but would like to avoid it. Any help will be rewarded with points.
    Thanks
    UV

    Go to SA38 and Execute Program "RIOBJK00"
    Also you can write an ABAP Query using Table SER03 and MSEG instead of going for ABAP Report.

  • WITHOUT STO RELEASE,SYSTEM WILLN'T ALLOW MATERIAL ISSUE WITH STO,IN SUP.PLA

    Hai Expert,
    I have one issue. please let me share..
    I have created one STO. Then i am going for issue in suppling plant with reference to STO, With out sto release also system is accepting to release...
    System should not allow to issue.. before STO RELEASE
    PLEASE GUIDE ME HOW TO CONTROL

    Sub-Contracting PO is subjected to release strategy..
    Without Sub-Contracting PO release, system is accepting to issue material to subcontract vendor...
    where as GRN is not accepting with reference to  this po...
    system has stop material issue also..
    to control this.. what i have to do ??

  • I can not watch a rented movie with iTunes

    I found the movie in the store (The Emperor (1080p HD)) and rented it thhrough my mini's (a 2.3 Ghz i5 w/ 16Gb Ram running Mac OS 10.8.4) iTunes app (version 11.0.5). I waited for the movie to download completely. I selected the "Rented" tab from my "Movies" Library and clicked on the movie icon (it had a strange appearance which was a generic light grey box with a fim frame in the middle). iTunes responded with: "This movie requires Quicktime, which is not supported by this version of iTunes.). I admit I was dumbfounded for a moment since I associate Quicktime with Apple media more closely than iTunes. I went to the file via Finder, and looked at the extension: m4v and tried to open it with Quicktime. Quicktime responded: "This application cannot be used to play "Emperor (1080p HD).m4v" In order to play this content, please open it with iTunes."
    OK, I mumbled, I've seen nonsense like this before and it could be permissions based. My iTunes Library is on an external network drive because of its size. I'll copy the file to the local volume and see what happens. A few minutes later, the copy was complete. I added the file to my Library in iTunes, and this time the movie's icon image was correct. I launched to film. It opened and audio can be heard, but the video is absent. In its place is a field of alternating grey and white squares. I can watch any other video file at 1080p. The mini is connected via HDMI to a Yamaha AV receiver which outputs video to an Epson 5010 projector. Screenshots of the iTunes window appear the same when opened in Preview. I've changed the screen resolution from 1080p to 720 and 1080i and get the same result.
    This evening's experiment is over since the rental ends in 24 hours now that I've -listened- to the audio.
    Can anyone tell me why I had this experience and (outside of not renting another movie from iTunes) how I might successfully view an movie in the future?
    Thanks

    Hi Mikey1220,
    Thanks for visiting Apple Support Communities.
    If you have not been able to play the rented movie, I'd recommend starting with the troubleshooting steps in this article:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Troubleshoot issues on an iPhone, iPad, or iPod touch
    If you haven't been able to connect to the iTunes Store:
    Make sure your date, time, and time zone are correct in Settings > General> Date & Time.
    Note: Time Zone may list another city in your time zone.
    Make sure that your iOS software is up to date by tapping Settings >General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
    Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
    Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
    Make sure that you have an active Internet connection. You can check theuser guide for your device for help with connecting to the Internet.
    Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
    Try resetting (turning off and then on again) your Wi-Fi router.
    If the issue persists, try troubleshooting your Wi-Fi networks and connections.
    Next, try to download the movie again using the steps in this article:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    If your rental expired before you could view the movie, or if the behavior persists, you may want to report an issue with your purchase:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933
    Best Regards,
    Jeremy

  • Can I size-crop (not time-crop) a movie with QT Pro?

    There are black bars around a movie. Can I crop them away (like I would if black bars were in a Photoshop image -- select and crop), so that the movie ends up without the bars?

    Thanks for the suggestions. I'll try Stream Clip, but I've decided to also try exporting the movie to +Image Sequence+ (it's only a short movie), then batching the entire lot in Photoshop. That will allow me to crop, resample, colour correct, sharpen and whatever else I decide to experiment with. Is that a sensible way to improve the quality of a movie?
    That brings up three more questions (these are related to a recent post of mine, but no one has answered that one):
    *QUES 1*
    Can QT PRO tell me which frames in a movie are Key Frames?
    *QUES 2*
    Will a Key Frame appear to be an obviously better image than those surrounding it? That doesn't appear to be the case, as I manually went through the first 200 frames and couldn't see any obvious Key Frame. Maybe the frames that surround them are so close in quality that you can't tell.
    *QUES 3*
    When exporting, and I select Automatic for the Key Frame option, does that lock in the original Key Frames, or are Key Frames inserted only where QT PRO thinks they are needed? Or does it do both -- keep the original, plus extras where needed?

  • 2005 Apple Cinema displays not able to show movies with new iTunes

    ITunes is giving me the following error when trying to watch movies on my 2005 Apple Cinema display(s).
    The selected movie won’t play on one of your connected displays.
    This movie can be played only on displays that support HDCP (High-bandwidth Digital Content Protection).
    Try moving the iTunes window to a different display. Make sure the entire window is on the supported display.
    I called the Apple support, they said my displays can not support HDCP. Can anyone else comment on this?
    Is this true to the best of your knowledge?
    Is there anything I can do to make my movies play again? Other than buy new monitors of course.
    Thanks...

    Hi,
    Highlight one of the applications that cannot be updated and click File> Get Info. Make sure you are signing-in to the iTunes Store with that Account Name shown in the Get Info window.
    Then sign-in to the iTunes store and verify the account information as described here: http://support.apple.com/kb/HT1918
    If the issue persists, try to reconfigure the security software or remove the SC Info folder as others have in this related discussion: http://discussions.apple.com/thread.jspa?threadID=1939036
    Message was edited by: Jason L

  • I do not ear speaking in movies with earbud, just the music from the movie. With the speakers everthing is fine.

    Good day,
    It's strange, I can use earbuds for music (with voice) but it's almost impossible to ear actor voices in movies, just the movies music and with the Ipod touch speake everthing is fine. Can you hel me please ?

    Hi Thomas, 
    Thanks for your reply.
    Fortunatel  I've found meanwhile a solution.
    I  think the mismatch was related to the ios5 update, which I downloaded on the weekend on all me devies. At the same time, my wife was downloading the music on the ipad. Maybe that was too much updates/ downloads at the same time.
    I did a backup and tried once again and it worked properly, without any problems.
    Anyway tks for replay and I cross my fingers for a succesful license deal in Switzerland.
    Best (from Italy, Rome)
    Sven

  • Subcontracting child material issue with SO ref

    Hi all,
    As per the client business scenario we are using MTO for all production/purchase process, In between the production process the material also going to subcontract for some process and coming back as new material. As i mentioned earlier all material movement with ref to sale order only.
    So, the child material in SO stock, created the subcontract PO through MRP by using Item cat - L and Account Assignment - M, with child material, system is recoganising the subcontract consumption with ref to SO in 543 mvt type. but while sending the material from plant through 541 system is not able to recoganise (since there is no special stock assigned in value string OMJJ).
    How to make the Sale order reference as manditory while GI (541/542) and GR (101/102/543/544/545/546) of subcontracting.
    Request your valuable suggestions
    Regards
    Sridharan

    Hi,
    Please refer below link...
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a04ec1a0-c39b-2c10-6889-f6f69625f3f3?quicklink=index&overridelayout=true
    Kuber

  • Materialized View with Joins

    Dear Dev/DBAs,
    I have the following scenario:
    SQL> CREATE TABLE T1 (ID NUMBER(3),NAME VARCHAR2(10));
    SQL> CREATE TABLE T2 (ID NUMBER(3),NAME VARCHAR2(10));
    The T1 contains records having the ID num from 10 to 80 and the T2 having the ID from 90 to 170
    SQL> SELECT * FROM T1 JOIN ALL SELECT * FROM T2
    It give all records in the 2 tables.
    I'm planning to create a materialized view (like CREATE MATERIALIZED VIEW V_TAB REFRESH ON COMMIT AS SELECT * FROM T1 JOIN ALL SELECT * FROM T2) and it seems i can't do with the error ORA-12054, further the oracle documentation says that materialized view can only be used with a simple join.
    Do you have another solution??
    Note that the materialized views can be used to improve queries.
    Thank you in advance

    Straight from the link I posted:
    *Restrictions on Fast Refresh on Materialized Views with UNION ALL*Materialized views with the UNION ALL set operator support the REFRESH FAST option if the following conditions are satisfied:
    * The defining query must have the UNION ALL operator at the top level.
    The UNION ALL operator cannot be embedded inside a subquery, with one exception: The UNION ALL can be in a subquery in the FROM clause provided the defining query is of the form SELECT * FROM (view or subquery with UNION ALL) as in the following example:
    CREATE VIEW view_with_unionall AS
    (SELECT c.rowid crid, c.cust_id, 2 umarker
    FROM customers c WHERE c.cust_last_name = 'Smith'
    UNION ALL
    SELECT c.rowid crid, c.cust_id, 3 umarker
    FROM customers c WHERE c.cust_last_name = 'Jones');
    CREATE MATERIALIZED VIEW unionall_inside_view_mv
    REFRESH FAST ON DEMAND AS
    SELECT * FROM view_with_unionall;
    Note that the view view_with_unionall satisfies the requirements for fast refresh.
    * Each query block in the UNION ALL query must satisfy the requirements of a fast refreshable materialized view with aggregates or a fast refreshable materialized view with joins.
    The appropriate materialized view logs must be created on the tables as required for the corresponding type of fast refreshable materialized view.
    Note that the Oracle Database also allows the special case of a single table materialized view with joins only provided the ROWID column has been included in the SELECT list and in the materialized view log. This is shown in the defining query of the view view_with_unionall.
    * The SELECT list of each query must include a maintenance column, called a UNION ALL marker. The UNION ALL column must have a distinct constant numeric or string value in each UNION ALL branch. Further, the marker column must appear in the same ordinal position in the SELECT list of each query block.
    * Some features such as outer joins, insert-only aggregate materialized view queries and remote tables are not supported for materialized views with UNION ALL.
    * Partiton Change Tracking (PCT)-based refresh is not supported for UNION ALL materialized views.
    * The compatibility initialization parameter must be set to 9.2.0 or higher to create a fast refreshable materialized view with UNION ALL.

  • Captivate will not record ALL screen movements

    I have been using Camtashia and recently move to another
    company where they want to start using Captivate. I just bought
    Captiveate and I am getting very aggrevated! Captivate will not
    record all my movements with the mouse or when a screen changes. It
    appears that everything is driven by an actual mouse click. Only
    when I move my mouse around and then click will it actuall record
    the "action".
    Please tell me there is a way for Captivate to record all
    mouse movements, keystrokes, changes in applications just as I see
    it when I am actually doing the recording.
    I dont need all this fancy highlighting and project wizards,
    I just simply want Captivate to record EXACTLY what I do and see
    while I am recording.
    PLEASE HELP!

    Hi Tmy8ster and welcome to our community
    No doubt you are frustrated if you are expecting Captivate to
    behave like Camtasia. Yes, both create similar output, but both
    accomplish it in entirely different ways.
    Perhaps the following link to a thread where I attempted to
    explain it will help:
    Click
    here to read the thread
    Cheers... Rick

  • I'm not techinal so please bear with me. I don't have the bar that allows me to type in a website. I did have a few minutes ago. When I make the page full screen and move my cursor to the top of the page, the bar drops down and I can use it.  help

    I'm not techinal so please bear with me. I don't have the bar that allows me to type in a website. I did have a few minutes ago. When I make the page full screen and move my cursor to the top of the page, the bar drops down and I can use it. I've tried restarting my computer, didn't work. Help!

    Well I figured it out, right click the arrow that makes the screen bigger and unclick the Hide Toolbar. I knew it couldn't be that hard.

  • Not able to create a material document with movement type 103

    I am not able to create a material document with movement type 103,
    The system is populating the value as 101 .
    How do I create a matdoc with movement type 103?

    What is the error you receive? Please specify with message number.
    On MIGO, you need to change the default value mvmt type value to 103 before you enter the PO number to be able to do 103.
    Once this defualt value is set, you can enter the PO and item number in the document number fields and proceed with 103.
    But you cannot change the mvmt type for already entered items from 101-103 or vice versa.
    I think the 101-103 and 103-101 mvmt type conversion message is standard error message

  • Error: LK047 Material movement could not be posted in the system via IDOC

    I am trying to create an article document (goods movement doc) for an already created purchase order.
    but this is via an IDOC (WMMBXY). after filling the data in WE19, i shoot the idoc in to the system. in we02 i get the following error message: LK047 Material movement could not be posted in the system . Can someone please help.
    the following fields are filled:
    Segment: E1MBXYH
    Document date        20091124
    Posting date         20091124
    Reference            9999999999
    Doc.Header Text      POS/1110
    Transaction code     MB01
    USNAM                user12
    Segment: E1MBXYI
    Processing ind.      1
    Material             832924
    Plant                1110
    Movement Type        101
    Debit/Credit     +
    Currency             EUR
    Qty in un.entry      250
    Unit of Entry        PAK
    Qty OPUn             90
    OrdPriceUnit         KG
    Purchasing Doc.      9100000141
    Item                 1
    Profit Center        11090
    G/L Account          22706
    Movement Type        101
    SLED/BBD             20091231

    Hello Shankar,
    Glad to hear from you!
    In your question, please make sure you use leading zeros for the MATNR field.  In header segment field E1MBXYH-BKTXT, we use header text. Hope you are using inbound posting function L_IDOC_INPUT_WMMBXY.
    Please try with this and it works for us.
    Thanks a lot,
    Venu

Maybe you are looking for