Material posting

Hi,
While doing goods movement in MB1C the system show the following error"Maintain tolerance limits for tolerance key VP (CoCode ZWEL)
Message no. M8215.
Regards,
Renuga.A

HI
SPRO--->MM-->IM>Goods Receipt--->Set Tolerance limit for VP
Tc-de -
OMR6
vIVEK
Edited by: Vivek N on Sep 30, 2008 12:34 PM

Similar Messages

  • Issue while doing material posting through Usage Decision

    Hi all,
    I have an issue while doing material posting through Usage Decision. Please find below the details.
    Inspection Lot  10000604689
    Material        1730PCPBS.0031
    Batch           QP611097      GQ02
    Out of total qty of 2100 we need to post the following
    To unrestricted use                     2,098
    To sample usage                         2
    Following error appears,
    Deficit of SL Stck.in qual.insp 1,638 NO : 1730PCPBS.0031 62GQ GQ02 QP611097
    Message no. M7021
    Diagnosis
    Shortfall below the specified stock level or quantity amounting to 1,638 NO.
    System Response
    If the message is an error message (E), the above is not allowed.
    If the message is a warning message (W), the system will allow your input, but the warning is intended to prevent you entering a wrong quantity.
    Procedure
    In the case of a warning message, check the quantity entered.
    In the case of an error message, change the quantity or terminate processing.
    I have checked that quantity 2100 of material 1730PCPBS.0031 is in QI stock. Kindly advice what is the issue and why we are getting the error?
    Regards,
    Brijesh

    Hi Brijesh,
    What is the status of inspection lot?
    One of the possibilities I think could be inconsistencies between MM and QM.
    Have a look on SAP note 48815- Checking possible inconsistencies between MM and QM.
    Regards,
    Anand Rao

  • HU items' material posting is inconsistent (Message no. HUGENERAL327)

    Hi,
    I am trying to pack a material in an Outbound Delivery (OBDLV),  into a container (Packing Material) and while trying to Post GI (PGI), system is throwing the error message:
    HU items' material posting is inconsistent (Message no. HUGENERAL327).
    In Details of the message it is as below:
    Diagnosis
    Handling unit 2001422 contains more than one item. The goods movement posts the items to storage locations with different HU-management strategies. The stock contained in one handling unit can be located either only in HU-managed storage locations or only in non-HU storage locations.
    Procedure
    You have the following options:
    Post all items to an HU-managed storage location
    Post all items to a non-HU storage location
    Repack the items in different handling units so that items that are to be posted to the same type of storage location are packed together.
    I am not sure what in configuration is missing opr what master data is not set up correctly.
    Please help.
    Regards,
    Kalyan

    Hi,
    different cases can cause the error message hugeneral327. In most cases this error message is shown  when stock determination is used together with handling unit management. This is not supported in standard.                                                                               
    Please check the attached notes 550289, 605629 and 952440, where it is described, that handling unit management and stock determination does not work together.          
    Regards,
    Ely

  • HU items' material posting is inconsistent

    Outbound delivery confirmations IDOCs are failing when the material has a stock determation rule and is assigned to a Handling Unit.
    I reviewed SAP notes 550289, 605629, 952440.
    The notes state HUM and Stock Determation are NOT comptabile. This is an issue as ALL deliveries which are PGId from High Jump contain materials which are packed in Handling Units.
    Stock Determination rules are set up for vendor consignment.
    IDOC Error Message:
    HU items' material posting is inconsistent
    Message no. HUGENERAL327
    Diagnosis
    Handling unit MDED8 contains more than one item. The goods movement posts the items to storage locations with different HU-management strategies. The stock contained in one handling unit can be located either only in HU-managed storage locations or only in non-HU storage locations.
    Procedure
    You have the following options:
    Post all items to an HU-managed storage location
    Post all items to a non-HU storage location
    Repack the items in different handling units so that items that are to be posted to the same type of storage location are packed together.
    In my case,
    We are posting all items to non-HU storaage location. Why is it still failing? All HU items are being posted to the same storage location and in a NON HU storage location.
    Logistics General>HUM>General>MM>IM-->HU Requirement for Storage Locations and Default Values for
    When I check for our DWMS plants and their associated storage locations, the HU requirment is UNCHECKED for all storage locations for all plants.
    Any ideas? Please explain why the issue still exists or how to over come this issue.

    Hello,
    I am having the same problem when I want to use stock determination and HUM in the delivery GI.  The add-on solution that SAP wants to get paid does not apply to the US country yet.  So I am not sure if SAP has solution available.
    My workaround is to user mvt 411K to move from consignment to own stock at the time of delivery picking out of warehouse.  Then, proceed with normal packing and GI.
    Let me know if you have other better solution.
    Thanks,

  • Document flow not showing material posted details in maint order

    Dear Frnds,
         In the refurbishment order document flow is not showing material posting documents. Plz guide me to correct the issue. Thanks for all your cooperation.
    Guruprasad KS

    Dear Thygarajan,
    Thx for ur reply. Goods issue button is been ticked in "Define Documentation for Goods Movements for the Order". Still same issue. It is working in different client so i hope not an IMG issues.Plz give ur valuable feedback.
    Guru

  • Pop up error message while material posting

    Hia,
    how can i pop up error message while material posting based on user .
    thank u in advance

    Hi Ram
    Nobody is getting your requirement. Please explain your question.
    Thanks & Regards
    Kapil Nanda

  • Material posting to GL

    I don't know much about FICO or Accounting, but if I want to set to which GL account a specific material must post to, where do I do that. The process starts with a Sales Order, then a Billing document, and the Billing Doc automatically generates an Accounting Document. this specific material post to the wrong GL, wheredo I change it and direct the posting to the correct GL.

    As explained above, for a combination of condition typesales organisationCustomer account assingnment group+Material account assingmnent group and Account key,  GL account is assigned in T Code: VKOA. Please find the relevant material group in material master (MM03) for the material. Then check your settings in VKOA. Please post if you have further questions.
    Thanks,
    Kalyan

  • View/Check financial and material posting periods

    Hi,
    How can I check the financial and material posting periods for next year (or a given period)?
    Alternatively, what is the table name to view the above?
    Thanks
    Keeley

    Dear,
    Check the table T001B for financial posting periods and table MARV for material posting periods.

  • Changing an asset during  material post.

    Hi i have a such task:
    MIGO, operation Good issue. I need to change asset card in time of posting material.
    I find a badi mb_migo_badi, method post_document and try to change asset here by using BAPI_FIXEDASSET_CHANGE.
    but after my changes SAP changes an asset itself and my changes are canceled.
    Have anybody a good idea about this?

    Hi, Erwan. Yes, I use BAPI_TRANSACTION_COMMIT, and see my changes are exist in ANLA but then SAP finished its work and my changes are canceled.
    i need to post changes after sap but how ...
    Message was edited by:
            Evgeniy SEMENIKHIN

  • Account determination Error during material posting

    hi
    when i try to post the stock through MB1C, it shows an error that Account determination for omb1 (company Code)GBP_BSA not possible.
    please help me out and where i exactly i missed the configuaration
    thanks

    Hi Friend,
    Goto Transaction code OMS2 and click on the Qantity update for your plant and material combination.
    This will help
    regards,
    santosh

  • Is there any list / report to see the material posted to COST Center

    Hi ...
    I have created a Purchase Order for raw material with Account category "K" cost center and prepared a goods receipts for that.
    As I was expecting this GR doesn't increase the stock of Plant mentioned in Purchase Order
    But I was expecting that there will be two enteries in MATERIAL MOVEMENT with + and - qty. But there is only one entry with + qty.Can anyone explain the reason for that.
    Also pls help to search a report where i can see Stock which have been consumed by a COST Center.
    REGARDS
    SANDEEP

    Hi Sandeep,
    When you Receipt the material for Consumption (Cost center ), There two entries are posted with PO amount .
    i.e
    Debited to G/L account assigned to Material valuation class with Transaction GBB-VBR.This G/L account was used as a Cost elements for Cost center.
    Creadited to GR/IR Account.
    Reports:-
    Go for transaction code MB51
    select Materia , Plant,...
    Select Movement type -201
    Execute report.
    Go for Current display varient and select cost center as aPosition/line 1and continue.
    You will get report by cost center.
    Rewards if helpful..
    Regards
    sanjayL

  • Purchase Order Allowed to Modify After Material Posting and Invoice

    Hi Experts,
    Why do SAP allows the scenario to change the Purchase Order once Material Document is posted and Invoice is Created unlik Sales Order? Do we have any business scenarios reagarding allowing the PO change?
    Thanks for the Clarification. Hopefully I will be enlightened by SAP's behavior in the Purchasing Process.

    Hi Cecilio,
    PO is changable even after GR and IR has been completed. If the invoice has been received or the goods have been paid for, and your intended change affects the price, the change will be ineffective.
    Please refer to the Online documentation, MM Purchasing -> Purchase Orders -> Changing, Cancelling, and Blocking Purchase Orders.
    Also if you want to delete the PO, when all the procurement process is finished, it must be possible to delete the PO item for archiving purpose for example.
    You can see the on-line help on that matter:
    "You cancel items in a purchase order by deleting them. Please note that an item may only be deleted if it is closed (that is
    to say , there is no outstanding quantity to be delivered or invoiced). Items are regarded as closed if, for example:
    · the ordered quantity (or more) has already been delivered
    · the ordered quantity has been invoiced in full
    · no related follow-on processes (such as reservations) are active
      in the stystem."
    Hope this can help
    Regards,
    Mauro

  • Material Posting Date & Usage

    Hi Gurus,
    My requirement is to desing a new sales and usage of Materials for a Paticular plant.
    In this report i need to show Posting Date in selection screen,
    And please let me know how we will find out the usage of the Materials.
    Thankyou in advance.

    You can get the Posting date from table MKPF for material documents.
    That is for a material in sales order whenever u do a Post Goods Issue then the Tables MKPF and MSEG are updated.
    U can find the material number in table MSEG( Line item table for material document)
    and the Posting date corresponding to that mat. doc no. in MKPF ( Header table)
    Similarly usage of material u can get by the stock available in MSEG table for that material. U can see these tables u will get a fair idea.

  • Material posting block

    Hi friends,
        when i am posting a material system shows error message
    i.e G/L account 399999 does not exist in company code 8888
    then i used FS00 for assign G/L account 399999 to company code
    8888.then i got one error i.e Account 399999 blocked for creation of chart of accounts INT.Then what i can do for solve this error.
    Any body post the correct answer it will more help to me.
    Thanks & Regards
    Karunakar

    Hi karunakar,
    In T-code FS00, clcik on field BLOCK, in that untick the field block for creation.
    Regards
    Velu Mudaliar

  • Material Posting for Refurbishment order

    Hii MM Gurus,
    I am going to take external service for making repair of the pump. For repair i am going to send pump & some bearing out for repair of the pump. I am following the process as follows which is out of SAP (Not yet configured). The process is as
    1. I make refurbishment order for pump & also assign other material.
    2. I make goods issue from store  on order & then sends goods to supplier.
    3. I am making issue to order but the next operation that is sending material to vendor after goods issue is out of sytsem as for doing 541 material should be in stock & i have already posted it on order.
    So what should i follows or how i should post the material sothat it will get issue to order & also post the movements sothat it will allow me to send it out to vendor?
    What process i should follow sothat i can show the material is received from vendor & then Repaired pump is available in store for use?
    Regards
    Makarand

    I am using IW81 for creation of refurbishment order.
    IW32 to change order for updating other material & external service so that PR should get generated.
    Then I am using MIGO for issue of goods to order sothat i can show consumption of material for the order.
    We are making PO from PR generated.
    Then i am sending material out for repair to supplier on some mannual challan no SAP movement is posted after above MIGO.
    Then we receive the material from supplier this is also manual process.
    then we do IW8W to return the Pump to store with some other Valuation type say C2.
    But when we are sending material out to supplier for repair we cannot having accountability of material through SAP as it is not having any posting through SAP.
    Pl guide I want to show that the material is first issued to order then it sent out against the PM order out to vendor for repair.
    By PM module it is possible with User status to show the equipment or serial number is at vendor but how to show it through MM.
    Regards

  • Error at material posting [MB1C]

    Hi guys!
    i am getting a problem while posting material, saying
    account 473000 for tras/event key BSX, postable directly.
    before this problem i maintained
    0001 valuation class as 7920 and G/L account as 473000 in BSX/INT
    Thanks and regards
    KV

    Dear Krishna,
    T. Code: FS00
    Key-in A/C - 473000 and Company Code.
    Go to Tab: Create/bank/interest
    and Check Box: Post Automatically only. Mark this Box, as "Ticked".
    Best Regards,
    Amit
    Note: Reference -
    [A/C Postable Directly|Acct. 145301 for trans./event key BSX, postable directly.]

Maybe you are looking for