Mavericks not running after install

After more than an hour install, and restart, Mavericks is cycling through all the screen saver photos, sometimes with he message LOADING PHOTOS.
Should I force Shutdown ?
Mike

Or at least a restart.  menu/About This Mac - what OS shows?

Similar Messages

  • Premiere Elements 12 will not run after installing on my HP laptop with Windows 7.

    Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
    I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

    Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
    I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

  • WSUS 3.0 SP2 will not run after installing update 2720211

    http://support.microsoft.com/kb/2720211
    The update was installed and server rebooted.  Now the WSUS console on Server 2008 SP2 will not run.  "Error: Connection Error.  An error occurred trying to connect to WSUS server."
    The update service and IIS are both running.
    When checking for updates from clients, they  show a message saying their update software needs to be upgraded, but they fail updating.
    I was going to uninstall the update, but there is no option to uninstall the update from the WSUS server.
    What are options to fix this?

    This page helped alot. Let me recap for others on the interwebs.
    Cause:
    - Applied KB2720211 to a WSUS 3.0 SP2 server thats running on Windows 2008 64 bit server with local SQL db.
    What happened:
    - I could no longer sync my WSUS server with the interwebs.
    - clients could still connect to WSUS and I could still open the WSUS console.
    - Uninstalled WSUS, left DB and downloads and reinstalled WSUS in attempt to fix broken syncing.
    - Clients could now no longer sync with WSUS server. (They got Windows Update error code 800B0001).
    Solution:
    - Googled, found this page.
    - Followed just these last few steps that Chucker2 posted.
    Extract necessary files from 2720211 installer
    Download the KB2720211 installer for your architecture from Microsoft (http://support.microsoft.com/kb/2720211)
    Extract WUSSetup.msp from the installer by running the installer with the /extract parameter (example: "WSUS-KB2720211-x64.exe /extract")
    With 7-zip, open WUSSetup.msp and extract "PCW_CAB_SUS".
    With 7-zip, open "PCW_CAB_SUS" and extract "DbCert", "DbCertDll", and "DbCertSql".
    Rename those files to "WSUSSignDb.cer", "WSUSSignDb.dll", and "WSUSSignDb.sql", respectively.
    On your WSUS server, navigate to "C:\Windows\SYSMSI\SSEE\MSSQL.2005\MSSQL\SchemaSig" and copy the extracted "WSUSSignDb.cer" and "WSUSSignDb.dll" to it. Make a backup copy of the two existing versions, just in case.
    On your WSUS server, navigate to "C:\Program Files\Update Services\Database" and copy the extracted "WSUSSignDb.sql" to it. Make a backup copy of any existing versions of the file.
    Reinstalled 2720211
    PROBLEM FIXED AND CLIENTS COULD ALL SYNCH AGAIN.
    Thanks Chucker 2.
    ps. Susan Bradley stop polluting every WSUS post on the interwebs with your constant links to WSUS KB2720211 : Common issues
    encountered and how to fix them
    this is the best solution. after reboot the problem is solved .
    kailash

  • Premiere Elements 12 will not run after install

    Long time Premire and Premiere Elements user.  Had been using PE 9 earlier this week.  Yesterday purchased PE 12.  Before even downloading, to avoid any potential conflicts, I uninstalled PE 9, then installed PE12.  After reboot, I attempted to launch the application.  it fails.
    Based on http://forums.adobe.com/message/6329465#6329465 I did not find any prefs files, but removed (both) 12.0 directories in an attempt to help things along.  Nothing.
    When I attempt to launch PE 12, "create new project" it just hangs.  This is the dump from Windows in the "stopped working" dialog box:
    Problem signature:
      Problem Event Name:          APPCRASH
      Application Name:          ADOBE PREMIERE ELEMENTS.EXE
      Application Version:          12.0.0.0
      Application Timestamp:          523cd4d5
      Fault Module Name:          dvamarshal.dll
      Fault Module Version:          11.0.0.0
      Fault Module Timestamp:          523cc62d
      Exception Code:          c0000005
      Exception Offset:          0000000000034961
      OS Version:          6.1.7601.2.1.0.768.3
      Locale ID:          1033
      Additional Information 1:          5a5c
      Additional Information 2:          5a5c7f2099c49d46ef167594373b054c
      Additional Information 3:          e2a1
      Additional Information 4:          e2a18ccc946fae77ae70bd7ffb1dd642
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt
    Help is greatly appreciated.  I have a project I need to edit and post today if possible.  Would like to get this working ASAP. 
    WIn 7 Home Premium, 64-bit, 8 GB RAM.  Nothing else actively running save Chrome at time of repeated failures.
    Thanks in advance

    Caleb
    Thanks for letting us know of the outcome of your contact with Adobe.
    I do not work for Adobe nor am I affliated with it in any way. Just a user in a user to user forum.
    In my troubleshooting of various Premiere Elements has have not yet run into a connection between the  dvamarshal.dll and the computer's video card/graphics card. But, video card/graphics card compatibility issues can cause the type of problems that you see in the program.
    What video card/graphics card does your computer use? Under Device Manager/Display Adapters/, do you see only one card listed or two? Assuming that the card(s) are up to date, then please try the following. We are going to delete the BadDrivers.txt file for Premiere Elements 12. In Windows 7, 8, or 8.1 64 bit, it can be found
    Local Disk C
    Program Data
    Adobe
    Premiere Elements
    and in the Premiere Elements Folder is the BadDrivers.txt file that you delete. In this Premiere Elements Folder are folders besides this BadDrivers.txt file. You do not want anything in the folders in the Premiere Elements Folder, only the file named BadDrivers.txt file. (When you open a new project, the program will generate a new BadDrivers.txt file and hopefully all will be resolved.) Be sure to be working with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
    The rationale behind the above approach is explained in the following older thread (post 10). BadDrivers.txt deletion has proven to be a life saver for those with display issues in 9 as well as later versions.
    http://forums.adobe.com/thread/732067
    About reverting to Premiere Elements 9.0/9.0.1....
    We can get tryout files for 9 from the following web site, and you can insert your purchased serial number in them....
    http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-direct-download-links.h tml
    You have to read the instructions very carefully so that you do not get hit with an Access Denied message.
    But, we need to get your purchased serial number. If you registered Premiere Elements 9 with Adobe, you should be able to see it at http://www.adobe.com under "My Products".
    Please review and consider the above and then we can decide what troubleshooting strategy needs to be developed.
    Thanks.
    ATR

  • Fix for Photoshop not running after install

    Hi all,
    I recently purchased Photoshop CC and tried to install it on my home built computer that has an SSD for the OS and an HDD for my installed programs.  When I went to run Photoshop after I installed it, it gave me an error message saying that it could not find a good version of Adobe Application Manager, saying it was damaged or broken.  After numerous attempts to fix the problem, an Adobe technical support team member named Arul copied the Adobe folder C:\Program Files (x86)\Common Files to my HDD E:\Program Files (x86)\Common Files.  Following this Photoshop and Lightroom booted up without a hitch.
    Hope this helps anyone with the same issue!@

    Or at least a restart.  menu/About This Mac - what OS shows?

  • Key Apple software programs not running after install

    Hola
    I have an Intel Mac Book Pro that has recently had a hard disk failure( 3rd in 5 years) and subsequent replacement. Before the failure I had , rather stupidly , upgraded to 10.8 (bought from Apple online) which caused my machine to run at an almost constant beach-ball status. Anyway it fell over, drive replaced and today i reinstalled 10.6 from my original upgrade disks. I also tried to reinstall ILife and IWork. However I'm informed that I'm unable to do so unless i upgrade to 10.7 or 10.8. This is useless. My machine falls over when you use 10.8. I have paid foe and own 10.6 original disks, however I'm unable to install the Life and Work programs. In addition I'm unable to re-install my contacts, notes, calendar.
    Does anyone have any ideas as to how i can continue to run the 10.6 associated programs.
    Rather ironically the Microsoft programs re-installed perfectly!
    Help please....

    The problem is actually that Leopard's VNC server only supports 32 bit color. If your client tries to request a lower resolution the connection will fail. It doesn't work on my pocket pc VNC client either.
    Chicken of the VNC still works if you enable 'let server decide' on the resolution. I agree though, this seems like a downgrade to me.
    Via
    http://www.macosxhints.com/article.php?story=20071109130303999

  • VNC software not running after install of Leopard

    After I installed Leopard last week Chicken of VNC is not connecting to remoter site. any other people having this problem? Chicken says it is trying to use port 5901. I know before it was using 5900. Is there a place I can change this?

    The problem is actually that Leopard's VNC server only supports 32 bit color. If your client tries to request a lower resolution the connection will fail. It doesn't work on my pocket pc VNC client either.
    Chicken of the VNC still works if you enable 'let server decide' on the resolution. I agree though, this seems like a downgrade to me.
    Via
    http://www.macosxhints.com/article.php?story=20071109130303999

  • Crystal Report XI developer kit not running after install

    Hi, I am new in Crystal Report. We just purchased Crystal Report XI developer kit, and I installed it on a windows 2003 server with sp II. But when I go to program file-> BusinessObjects XI->Crystal Reports->Crystal Reports XI to try to launch Crystal Report, nothing show up, not even an error message. I did unistall and reinstall the software again once, but still the same. On the server, there is .NET framework 2.0.
    Anybody please help how to make Crystal Report XI up running.
    Thanks,
    Qiaomei

    Ludek,
    I am quite confused too. I could not find about | help anywhere related to Cyrstal Report. I wish I could attach an image to show you if I can. Here is what it looks like if I go to programs
    from start->programs ->
    BusinessObjects XI -> Crystal Reports----
    >Crystal Reports for .Net Samples
    Crystal Reports XI  -
    Business Objects License Manager -
    Crystal Reports XI
    Registration Wizard
    Report Designer Component Samples
    If I go to Business Objects License Manager, the first line of the window is
    Product: Crystal Reports Developer
    I am not sure if this can help you understand what I have.
    Thanks.
    Edited by: fqmchy on Mar 30, 2009 7:19 PM
    Edited by: fqmchy on Mar 30, 2009 7:20 PM

  • Fans CONSTANTLY running after installing Mavericks

    So yeah - Fan constantly running after installing Mavericks.
    NOT HARDWARE... tell me it is and ill lose my mind... I used  to be an Apple Tech.
    Erased and REINSTALLED Mountain Lion = RESOLVED
    Reinstalled Mavericks = PERSISTS
    REINSTALLED Mountain Lion = RESOLVED
    --AWAITING OS FIX---
    MACBOOK PRO 2009, 750GB HD, 8GB RAM

    So yeah - Fan constantly running after installing Mavericks.
    NOT HARDWARE... tell me it is and ill lose my mind... I used  to be an Apple Tech.
    Erased and REINSTALLED Mountain Lion = RESOLVED
    Reinstalled Mavericks = PERSISTS
    REINSTALLED Mountain Lion = RESOLVED
    --AWAITING OS FIX---
    MACBOOK PRO 2009, 750GB HD, 8GB RAM

  • My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

    My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

    Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
    Have you tried deletting the plists for MAS?
    This page might help you out...
    http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
    Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
    Let me know how you get on?
    Thanks.

  • Mp600r does not work after installing mavericks 10.9 what do I do now ?

    Canon Mp 600r does not work after installing Mavericks 10.9 What do I do now ?

    This thread should help:
    https://discussions.apple.com/message/19407500#19407500?ac_cid=tw123456#19407500

  • Premier elements 12 will not run after re-install

    Premier elements 12 will not run after re-install - it is legal and registered with adobe under my ID. WTF! The reason I re-installed it was because it could not find the internet - which is working. And premier 12 was working for a while then quit - that is why as a last ditch effort - i re-installed it. Any ideas?

    scottg
    Please review the following for possible solutions to your Premiere Elements 12 issue.
    http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
    http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
    Looking forward to learning of your results when your schedule permits.
    Thank you.
    ATR

  • Camera (Skype, FaceTime, iChat) not working after installing Maverick OS

    camera (Skype, FaceTime, iChat) not working after installing Maverick OS

    kwmaclean wrote:... same problem...
    If How to Troubleshoot iSight doesn't help, Reinstall OS X.
    Message was edited by: EZ Jim
    Mac OSX 10.9

  • Internet not working after installing "StarTech Thunderbolt Docking Station" driver

    My Internet is not working after installing "StarTech Thunderbolt Docking Station" driver although "Ethernet" and "wireless" say they're connected, still there is no internet.
    I have bought a "StarTech Thunderbolt Docking Station" as I need to use 2 thunderbolt based pieces of equipment on my "MacBook Pro"; which are a 2nd monitor as well as a Thunderbolt driven Audio Interface.
    When I first plugged all my equipment to the "StarTech Thunderbolt Docking Station" everything was working fine, all pieces of equipment worked as well as Ethernet from both the computer and the docking station were working perfectly.
    However, when I inserted the "StarTech Thunderbolt Docking Station driver CD" and installed the drivers, the internet on my computer has stopped working. Although the Ethernet says it is "connected" (same goes for "Thunderbolt Ethernet" when cable is connected to it) still the internet does not work. Even my wireless internet is not working anymore. Furthermore, also after installing the Docking Station drivers, my iTunes is crashing whenever started.
    Please help, this is really urgent.
    I've been looking for answers all around but can't seem to find any.
    I'm using OSX Mavericks 10.9.2
    I've tried fixing stuff with Network preferences, like changing IP address, renewing DHCP leace.
    I also tried typing IP address, Subnet Mask, Router and DNS Sever manually... Nothing seems to be working.
    Note: I know someone could suggest to "uninstall" the Thunderbolt Station driver, however, I can't find an "uninstallation file", even the CD that came with the docking station does not have it.

    I had exactly the same problem today, and I was lucky enough to solve it.
    Here's what helped me:
    First, I found a hint to Suspicious Package in this thread.
    With Suspicious Package installed, I was able to identify the script in StarTech's installer pkg. It' called "postflight".
    Amongst other things, postflight runs this command:
    sudo mv usr/share/sandbox/mDNSResponder.sb usr/share/sandbox/_mDNSResponder.sb
    A quick check in Apple's knowledge base revealed, that the mDNSResponder is essential to use DNS (i.e. to resolve server names like www.apple.com) and bonjour.
    I moved th mDNSResponder back to where it belongs:
    sudo mv usr/share/sandbox/_mDNSResponder.sb usr/share/sandbox/mDNSResponder.sb
    After a reboot, everything worked fine again.
    I have no idea, why StarTeck disables an essential tool. Let's assume it's an error ...
    But after this experience, I didn't want the StarTech ethernet driver on my machine (I had installed it just for curiosity, anyway - yes, I know, I shouldn't have ...), so I removed the kext the installer had copied to my system:
    sudo mv /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleIntel8 2580.kext /Users/myusername
    (You see I didn't delete the kext directly, I just moved it away and tried another reboot. Now everything works fine, so I'm going to delete the kext entirely and paint a big red cross on StarTech's installer disk.
    Hope this helps.

  • Unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1

    I am unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1. Log message is as follows:
    Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
    Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\xplog70.dll'.
    Error: 17750, Severity: 16, State: 0.
    Could not load the DLL xplog70.dll, or one of the DLLs it references. Reason: (null).

    Hi JFriedley,
    According to your error message, there might three reasons for this issue.
    xplog70.dll is corrupt, you need to check if you have any SQL Server running on same file version and same production
     edition. If xplog70.dll is corrupt, you can copy it from the new server where agent is running fine to your problematic server.
    Native client not installed properly. If you try applying any latest Service Pack or Cumulative Update then check if the SQL Server Agent can start, if that also doesn’t solve issue then try to reinstalling SQL Server Native client from SQL Server setup
    files.
    There is a similar issue about error 17750, you can review the following article.
    http://blogs.lostincreativity.com/sqldba/sqlserver-error-17750-could-not-load-the-dll-xpstar90-dll/
    Regards,
    Sofiya Li
    If you have any feedback on our support, please click here.
    Sofiya Li
    TechNet Community Support

Maybe you are looking for