Max no of connections in the RFC receiver ?
Hi Guys,
when i increse the max no of connections from 1 to 5 , i am getting the following errors, i saw we can give up to 50. why it is not taking more than 1.
SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: resource error: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool RfcClient[cc_sap_recv]eb54a45a23bc3e3eabd929cc3f3b0688 is exhausted. The current pool size limit (max connections) is 1 connections.</SAP:AdditionalText>
any help would be appreciated
Thanks,
srini
In the Help it says 50!
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e80440a832e369e10000000a155106/frameset.htm
However, a fix for how to trace the exact Error is found here:
http://help.sap.com/saphelp_nw04s/helpdata/en/f6/daea401675752ae10000000a155106/frameset.htm
Similar Messages
-
The RFC Receiver adapter giving the proper response message
Hi Experts,
I done the one interface, that is Soap to RFC synchronous communication. I am passing the data from soap client and at the same time getting the response from sap system. but that is the wrong response. if i am testing the function module it giving proper response. at the calling interface level i am getting the wrong response. can you please help the this query.
Thanks & regards,
Veera.Hi Sathish,
As per ur post...
If the RFC working fine when testing and it's giving wrong response from Pi means...
1.there may be a chance of error in mapping.
I hope u may made the RFC as remote Enabled.
Also make sure that if u change the interface input and output parameters... u import the new RFC again and activate it.
before actually using it mapping.. u can test it once by using same RFC for both sender and receiver.
If it works fine.. then ur mapping should work.
If still problem occurs please do post.
Babu -
Cannot connect to the internet, receive or send emails.
Yesterday my phone was working perfectly, it turned off because the battery died. This morning I couldn't receive or send any emails, check my twitter or connect to the internet. My carrier is simple mobile, I called them and they said my phone had been locked by "itself" and there's nothing they could do.
Can someone help me please? I have a blackberry curve 9300
Thank youHi and Welcome to the Community!
insuzy wrote:
they said my phone had been locked by "itself" and there's nothing they could do.
I've never heard any agent use those words...and I cannot correlate them to anything I know about. Did they perhaps say anything more? Hopefully they did, but it's impossible to usefully guess from just that report from them. Did they indicate what kind of lock? There are just too many possibilities to know how to proceed here.
Further, did they just fob you off like that? Since you pay them for all of your services, they are responsible for supporting you in that regard, including escalating up to RIM if necessary. To just fob you off like that is incredibly poor customer service. Did you try a different agent? It's sad, but you often find that different agents have different levels of training...
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
RFC Receiver Adapter and RFC Destination -- Help
Hi,
I would like to configure the RFC Receiver Adapter for the invokation of a RFC on SAP System (Name: ALPHA) using a RFC destination provided by another system named BETA.
I have set External Server as server type.
My first question is: I have to quote an application server gateway and a gateway service. Is this information related to a service on ALPHA or BETA?
My second question is:
It is also necessary to provide a Programm-ID. The destination on BETA is a R/3 connection and doesn't have a programm id. Where do I get this from?
And my last question is:
Is at all possible to use the RFC destination on BETA?
Any help is really appreciated...
Kind regards,
HeikoHi Heiko,
I don't fully understand your need but:)
since both of your systems are SAP systems
why are you trying to use external server?
can't you just call RFC on BETA
and inside this RFC on beta call RFC on ALPHA?
in a sync or async way?
can you tell a little more about your requirement ?
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a> -
How to call the RFC from XI system
Dear Friends,
My requirement is RFC to RFC scenario i.e SAP to XI to Third party system.
I have the BAPI_EUQI_CREATE rfc, this RFC is available in ECCsystem, that RFC I imported in XI system, so third party system how to call this RFC.
please give me the suggestion it is very helpful.
Regards,
Shalini ShahHi Shalini,
You have create a RFC in the 3rd party system and import that RFC in XI System using 3rd party adapter.Do the necessary mapping and configure the sender RFC Adapter and at receiver side configure 3rd paty Adapter.
The 3rd party adapters must be installed via Deploy Tool or JSPM. But u should have a sda file with the adpater content.
see here for more details on JSPM
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5006901f-925c-2910-5f98-9ae26cc07eca
For more info:
If you still want to do it,
1. Import the RFCs of sender and of receiver.
2. Do the necessary mapping.
3. Configure sender and receiver RFC adapters.
Before that check if you have RFC destination for the RFC adapter. If not You should establish it. To establish an RFC destination for the RFC adapter.
1. Call the transaction Display and Maintain RFC Destinations (SM59).
2. Select an existing RFC destination of type ABAP Connections (for example, ABAP_Old) by double-clicking it.
3. Choose Destination ® Copy and copy the RFC destination using a new name (for example, ABAP_New).
4. Save the new RFC destination (ABAP_New) and delete the old RFC destination (ABAP_Old).
5. Create a new RFC destination (for example, RFC_Adapter) of type T (TCP/IP connection) as the RFC destination for the RFC adapter.
6. Select the registration type Registered Server Program and in the Program ID field enter the corresponding program ID from the configuration of the sender RFC adapter.
7. In the Gateway host and Gateway service fields, enter the gateway host and gateway service from the configuration of the sender RFC adapter.
8. If the sender system is a Unicode system, define the RFC destination as Unicode.
9. Using the name of the old ABAP connection (ABAP_Old), create a new RFC destination of type L (logical destination with reference entry).
10. In the Reference Entry field enter the RFC destination (RFC_Adapter) for the RFC adapter.
For more details take a look at this link. http://help.sap.com/saphelp_nw70/helpdata/en/25/76cd3bae738826e10000000a11402f/content.htm
Dont forget to Reward points if this helps
Regards
Pragathi.
Edited by: Pragathi on May 24, 2008 7:21 AM -
RFC Receiver Adapter Problem- Sending Blank XML Node
Hi,
I'm using the RFC receiver adapter to call a RFC in R/3 from XI 3.0
In the payload XML one node is blank as I want to pass a blank parameter to the RFC. But in R/3 the blank node is getting converted to #
Can anyone suggest how can I pass a blank node while calling the RFC using RFC receiver adapter in XI 3.0?
Thanks in advance,
DipankarHey
Please check the outbound payload in sxmb_moni and RWB,if the field is blank there,then it means that PI is passing correct value to ECC.its possible that RFC has been coded in such a way that it converts blank spaces to #.Please look at RFC documentation in that case and see if it helps more.
If the outbound payload itself in PI is showing as # instead of blank,then check the message mapping in PI.
Thanx
Aamir -
RFC receiver channel, message not reflecting in Receiver ECC system
Hi All,
We are using Receiver RFC adapter to call a custom RFC (ASynchronous call). It was working fine, But now after we made a few changes in the mapping. The message is successful in PI, but it is not visible in ECC. When I check in RWB, I think the payload is not going correctly to ECC. I have re-imported the RFC and tried as well. It still does not work.
Kindlhy let me know what to do.
Rgds,
MithunHi Rajhan,
My abaper is doing that, By that time, i just saw the payload in the message display tool(MDT) in RWB...
it looks like some junk data
"QT00010101000120120119201201202012012020121231USD38130511T-F399000110000010001585030512T-F299000110000010001210SP0000001002"
where as in sxmb_moni of PI system the payload after mapping is
"<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:BAPI_QUOTATION_CREATEFROMDATA2 xmlns:ns1="urn:sap-com:document:sap:rfc:functions">
- <QUOTATION_HEADER_IN>
<DOC_TYPE>QT</DOC_TYPE>
<SALES_ORG>0001</SALES_ORG>
<DISTR_CHAN>01</DISTR_CHAN>
<DIVISION>01</DIVISION>
<PMNTTRMS>0001</PMNTTRMS>
<QT_VALID_F>20120119</QT_VALID_F>
<QT_VALID_T>20120120</QT_VALID_T>
<CT_VALID_F>20120120</CT_VALID_F>
<CT_VALID_T>20121231</CT_VALID_T>
<CURRENCY>USD</CURRENCY>
</QUOTATION_HEADER_IN>
<SALESDOCUMENTIN>381</SALESDOCUMENTIN>
- <QUOTATION_ITEMS_IN>
- <item>
<ITM_NUMBER>30511</ITM_NUMBER>
<MATERIAL>T-F399</MATERIAL>
<PLANT>0001</PLANT>
<TARGET_QTY>100</TARGET_QTY>
<SHORT_TEXT />
<MATL_GROUP />
<CUST_GROUP />
<PMNTTRMS>0001</PMNTTRMS>
<PRICE_DATE />
<SHIP_POINT>0001</SHIP_POINT>
<TARGET_VAL>5850</TARGET_VAL>
</item>
- <item>
<ITM_NUMBER>30512</ITM_NUMBER>
<MATERIAL>T-F299</MATERIAL>
<PLANT>0001</PLANT>
<TARGET_QTY>100</TARGET_QTY>
<SHORT_TEXT />
<MATL_GROUP />
<CUST_GROUP />
<PMNTTRMS>0001</PMNTTRMS>
<PRICE_DATE />
<SHIP_POINT>0001</SHIP_POINT>
<TARGET_VAL>210</TARGET_VAL>
</item>
</QUOTATION_ITEMS_IN>
- <QUOTATION_PARTNERS>
- <item>
<PARTN_ROLE>SP</PARTN_ROLE>
<PARTN_NUMB>0000001002</PARTN_NUMB>
<NAME />
<REGION />
</item>
</QUOTATION_PARTNERS>
</ns1:BAPI_QUOTATION_CREATEFROMDATA2>"
ANY SUGGESTIONS... This is PI 7.1 so its auto commit for the RFC receiver adapter rite. should i tick some option or what else can we do
Rgds,
Mithun -
Hi, ive got a problem with an Asynchronous message. The operation goes from an FTP to a RFC. The file adapter converts a flat file into a XML, and the XML is sent to a Remote RFC.
Everything is ok in XI. In the SXMB_MONI and in the RFC adapter monitor we see that the message is correctly sent to the RFC, but the RFC receive nothing.
We have written a short routine in the RFC that just insert an X in a testing table, but nothing happen.
Thanks.Hi Eduardo,
look as well to XI: SM58 and R/3: ST22 to find out the reason.
Regards,
Udo -
RFC receiver config withload balancing ?
Hi Guys,
I have configured the RFC receiver with load balancing. I have given the sap receiver system details and the name of the message server as sapms+SID.
I am getting the following error in PI, which says message server is unknown and i tested in the receiver system and the message server with this name exists.
what could be the problem, any helkp would be appreciated
Thanks,
sriniHi Srini,
I dont have access to system now.
<i>You dont need to create the logon group.</i>
For logon group ask your BASIS team. Alternatively if you have access to SLD then go to technical system details for the SAP system.
You will find all the logon groups mentioned there.
If you dont see there, then check in the SAP logon pad. Check detail entry for the SAP system. You will find the logon group mentioned there.
For paramter details see SAP help for RFC adapter.
Regards,
Sumit<a href="http://help.sap.com/saphelp_nw70/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm">RFC Receiver Adapter</a> -
Hello,
I have trouble with the following scenario:
Data from an R3 system is obtained by an RFC call and then send via SOAP to a 3rd party system.
On the R3 system the data is encoded in different codepages which need to be converted to UTF-8 before sending them via SOAP.
So I want to use an adapter module in the RFC receiver channel to make this conversion.
Unfortunatelly it seems like the data I am receiving in the adapter module is already converted to UTF-8, but from the wrong codepage.
For example I am expecting data to be sent to me in ISO-8859-9 and there should be the letter I with a dot above it in the payload which equals hex "c4 b0" in UTF-8. But instead I am finding "c3 9d" which is is the letter Y with acute. When I now look into the ISO-8859-9 code table, I find that my c4 b0 letter has the code DD. The letter I am getting instead is not in the ISO-8859-9 table, but it is in the ISO-8859-1 table.. and guess where, it also has code DD. The same goes for other letters.
So it seems the payload I am getting is already in UTF-8, but got converted to UTF-8 from the wrong codepage (In this case it seems like it was converted to UTF-8 from ISO-8859-1 instead of ISO-8859-9).
What can I do to receive the payload in the right encoding?> When its unicode, you should receive it in UTF-8.
Unicode or not, the RFC adapter always converts the payload into UTF-8, so there is nothing left to do here.
Regards
Stefan -
How to bring the RFC table values to front end
All
I want to display a table in front end
For that I connect to the RFC .Get into the table .
Here pl tell me how to get the values from the table
I did the following
JCO.Function func = getDefaultJCoConnection().getJCoFunction("Z_TestRFC");
getDefaultJCoConnection().execute(func);
JCO.Table records=func.getTableParameterList().getTable("ET_TestTable");
ArrayList list=new ArrayList();
for (int i = 0; i < records.getNumRows(); i++, records.nextRow()) {
list.add(records.getString("Name"));
return list;
But the table contains 4 columns Name,Address,age,remarks
In the above code I'm able to take just one column which is "Name" which works fine
I want to take all the values to front end
Please suggest
Muralisateesh
If I iterate all other fields where do I store them to take it to my jsp
If u see I added that column value in one ArrayList
So you want me to create 4 ArrayList and add populate them inside that for loop.
could you please elaborate on the same.or could you please improve that code and post
Thanks in advance
Murali -
Connection mba to av receiver pioneer VSX-322
Hi,
I'm trying to connect my mac book air (late 2011) to my av receiver pioneer VSX-322 trough a LMP "minidisplayport to hdmi converter" and hdmi cord
My av receiver will be later connected to a projector with hdmi connection. (my actual one has only a VGA connection and cannot be connected to the pioneer receiver
I want to transfer the image and audio signal from the MBA to av receiver (with sound played on the connected speakers) and the image from there to a hdmi connected projector
But the sound keep to be played on my mac book air...
Could somebody help me?
Thanks a lotOk,
I get the answer
(hummm...)
I only had to go into "preferences" -> "sound" -> "out" and choose hdmi instead of the mba speakers....
that was it! -
RFC Receiver adpater Connection problem , Help us to solve ?
Hi Friends ,
Our scenarilo is Mail to RFC. It was running fine. In RFC Receiver adapter i have given <b>Maximium connection property to 1</b> .
While multiple set data passed to rfc will connection problem will come ?
Most data not uploaded . I am getting the following error.
<b> If i set max connection to 5 . It is 5 times or more than that it is pusing the data .</b>
i am getting the following error <b>while i set the Max connection to 1 .</b> . <b>Any other place i need to change configuration ?</b>
<i><b> - Error: 2007-09-24 10:51:22 GMT-05:30: Message processed for interface YRFC_EXT_WARR: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: resource error: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool RfcClient[CC_EXTE_WAREN_2W_RFC_RECEIVER]e7fa21f86ec535e883636c0beffc0f0c is exhausted. The current pool size limit (max connections) is 1 connections.</b></i>
Please give the description . I have referred many likns . Help us to solve this problem .
Regards.,
V.Rangarajan<b></b>
Message was edited by:
ranga rajanHi,
Have a look at this.This will help you.
1.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f3f93ee7-0c01-0010-2593-d7c28b5377c2
2. https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3103eb90-0201-0010-71af-be6f4a6f61d1
Regards,
Akshay Jamgaonkar.
Reward points if find useful.
Message was edited by:
Akshay Jamgaonkar -
Kill the RFC connection as soon as the call is completed in Web Dynpro JAVA
Hi Experts,
Please guide us how to kill the RFC Connection from web dynpro java as soon as the execution is completed.The FM connection (Adaptive RFC) isnt getting closed in IS-U side. Please guide us how to close them explicitly.
We are getting the following error
(102) RFC_ERROR_COMMUNICATION max number of cpic clients exceeded (300)hi suvankar ,
wdContext.current<Modelname>_InputElement().modelObject().modelInstance().disconnectIfAlive();
use this option after executing your rfc, it will remove the connection to the r/3.
adn this
(102) RFC_ERROR_COMMUNICATION max number of cpic clients exceeded (300) -- is occuring because the pool size defined the jco destination is not sufficient, ask your basis team to increase the pool size.
Regards
Govardan -
TDMS RFC Connections Being Changed in Receiver Client
When using TDMS to refresh a test client, what settings should be change to not have the RFC and partner profiles changed in the receiver system? When using TDMS to refresh a test client, it is copying over the RFC connections and partner profiles. As a result, the test client has RFC connections and partner profiles pointing to external production apps. A minimum of an hour of work is needed to adjust the connections and there a potential of test data being sent to a production system before changes are made.
I spoke with my system integrator who had initially informed me of the issue. After further review, we believe TDMS may only have changed the ports and partner profiles but not the RFC connections. We have ports and partner profiles referring to RFC connections that do not exist. I did some research and was recommended I exclude the tables listed below from copy/delete. In an attempt to test, I have removed them from the copy/reduction and from the deletion. I am now receiving errors defining the conversion objects. "DDIC activation failed for one of the structures listed below" on conversion objects Z_T399X_00A, Z_X_AUFK_00A and Z_X_AUFPL_00A. From the troubleshooting options, I have attempted the Automatic Repair and Force Redefinition without success.
I am going to apply SAP OSS Notes 1362351 and 1363551 to resolve the issue.
Partner Profile/Port tables excluded from Copy/Reduction and Deletion:
EDILOGADR
EDIPHONE
EDIPOA
EDIPOACODPAG
EDIPOD
EDIPORT
EDIPOX
EDP12
EDP13
EDP21
EDPP1
EDPPV
TBD00
TBD002
TBD05
TBD06
EDADM
EDE5T
EDE6T
EDPST
EDPVW
Edited by: Chris McCabe on May 11, 2010 12:40 AM
Maybe you are looking for
-
My trusty Mac LC no longer boots from the HD
I purchased a new Mac LC many years ago and it has served me well until recently when it would no longer boot from the hard drive. When I boot from a Disk Tools floppy, I get some limited success but do not ever hear the HD spin up. The startup chime
-
Once I open a page as a PDF, all my layer info is lost. I've tried opening it on two machines and the dialog box continues to appear. Again, it's not a PDF extension. Thanks for the help!
-
Ideas about viewing/displaying XMP metadata from Reader ?
Hi, We are using Acrobat 9 to add XMP metadata to PDF documents. These documents are viewed by the others employees with Acrobat Reader. Since "File->Properties->Advanced Metadata" and "Custom Info Panels" are not available in Reader, how can we disp
-
'Delete' operation with CMIS connector
I was told in one of the post I made at - http://forums.adobe.com/thread/879186?tstart=0 that Drive uses 'Delete' option from the context menu of OS (no such option exists in the Drive menu). When I was testing my deleteObject method and tried to do
-
DeadBand-Sets the percent of change within a range that a value from the OPC server must change before the OPC server communicates the value to the Shared Variable Engine. I can't understand how OPC Server relize data range for different OPC items, w