Maximum DHCP reached, but why?

I have a BEFW11S4 and a network that consists of 8 devices. I have my Maximum # of DHCP users set to 50, so should have lots of IP Addresses, but I'm reaching the max -- when 192.168.1.149 gets assigned, I can't connect another PC to the network, even though there are lots of "empty" addresses available.
Does anyone know what I have to do to get the router to use the IP unassigned addresses, rather than just issuing ever-increasing numbers?
I tried resetting the router, but nothing changed -- do I need to drop all the existing DHCP entries and reset the router again, to get the IP addresses to start being issued from 192.168.1.100 again?

As a temporary measure you can go to the "DHCP Client Table" (located on the Status - Local Network tab) and delete all the entries. This will at least give you a clean slate. This will also kick everybody off your system until they reconnect.
Is your "Client Lease Time" set to 0 (which means 1 day) ? If not, try 0.

Similar Messages

Maximum number of authorisations reached, but why?

I have only one machine running Vista but every time I upgrade iTunes (like today when I upgraded to 7.3) it complains that this machine is not authorised to play the tunes. So I dutifully authorise again only to be greeted this time by the message that I have exceeded the maximum number of 5.
Why is this happening?
How do I fix the situation?
And loving it,
-Q
[email protected]
(Replace the "SixFour" with numbers to email me)

I am having a similar problem. See my posted thread.---Did Bill Gates buy apple?

USB endpoint hardware limit reached, but why?

I was playing with a few FTDI RS232 serial converter cables. Plugging them in and out. After doing this several times, I noticed that the device is not recognized anymore. I dug into the system logs and found the reason:
30/10/14 13:54:59,000 kernel[0]: The USB device at USB Address 0 might not work correctly because the controller driver has reached a hardware limit on the number of endpoints
Sure, sounds logical that there is a hardware limit to the number of connected USB devices. The thing is, I have only a single one connected. So it looks like something is not quite cleaned up when I pull the converter out of the USB socket.
Is there some way to clean the endpoints without rebooting my Mac?

sebman2112 wrote:
It's two completely different days, and time between calls was over over 12 hours.
You are located in Maine - EST.
Skype timings are based on UTC/GMT.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

ISA 2006 slow response, connections timeout, maximum limit reached?

Hey guys,
I've been having an issue with a client's ISA Server for the past couple of weeks and haven't been able to understand why this is happening.
They have a couple of ISA Servers Enterprise Edition in an array. This ISA Servers give Internet access to the entire company. They have significant amount of traffic through a Cisco Iron Port that all the users proxy settings are configured to this device
and the Iron Port forwards the requests to the ISA Servers.
This implementation have been working fine for months, until a few weeks back that started to have slow response problems from the ISA Servers. Analyzing the reports from the ISA Servers, I've noticed an increased amount of traffic a few times this
has happened and mostly from the Iron Port. The Cisco people says this increase amount is due to the fact that the ISA Server stops responding and new requests are made at the moment from the device. We have configured the Iron port IP in the exceptions of
the Flood Mitigation Settings of the ISA Server, and configure it to take more than 20,000 connections.
Still after this configuration, the same problem raised a couple of days back. The ISA Servers stops responding and they need to be forced shut down and restarted to get them back to work.
There are also some errors from some other internal IPs that it reaches maximum connection limits, but these are about 10 errors like this only. I was thinking maybe there are some infected computers or something but they said that they scanned the ones
that show the errors and nothing is detected.
From the ISA reports of the time of the incident, I saw that it reached more than 15,000 concurrent connections. More than double of what it usually handles throughout the day.
I don't know if there is like a connection limit that the ISA can handle before it hangs of something?
Is there any ideas on what can be happening with this?
Thanks for any replies!
Eduardo Rojas

Hi,
Have you check the Event logs on the ISA Server? Any error?
You could use ISABPA to do some basic troubleshootings.
http://www.microsoft.com/en-hk/download/details.aspx?id=811
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

ELearning Suite is falsely telling me maximum licenses reached, disabling software.

I could not get chat to work...nice job, Adobe. So: My eLearning Suite is telling me I have reached the maximum activated licenses, but one of the licenses is for an old computer that has been wiped of hardware. How do I get my software activated?

It sounds like the software is reporting correctly based on what you just described. Removing software does not change the activation count. You must use the deactivation function provided in the software or have Adobe support perform a reset. At this stage the latter is what you need to do. YOu will need to contact Adobe support thru chat and have them perform the reset. You can try to get phone support as well, though they normally only support Cloud products lately - still you might get lucky.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html
800-833-6687 (US daytime only 5AM-7PM PST, Monday-Friday).

HT201317 I had my photo stream on and my icloud all set up, i just had the screen replaced and they somehow lost all the photos off my phone, but why wont the photo's reload back on to my iphone now that im connected to wifi again, where are all my photos

I had my photo stream on and my icloud all set up, i just had the screen replaced and they somehow lost all the photos off my phone, but why wont the photo's reload back on to my iphone now that im connected to wifi again, where are all my photos???

When photos are added to the photo stream album on a device (either due to a new photo having been taken or having been synced from another device using the stream) they remain in the album. However, the syncing process involves copying the photos to the photo stream server where they are kept for a maximum of 30 days, up to 1000 photos. If a device is reset or the stream is turned off or turned back on again (or in your case, the device was repaired), the photos that were on the device's photo stream album are gone and the only ones to appear are those that are currently on the servers (recall the 30 day limit).
If some of your photos are older than 30 days, then they are no longer stored on the cloud and hence are not synced down to the iphone.
Recall, photo stream is just a syncing service, it is not designed as a storage service for photos. Always sync photos to a computer for archiving.

I verified my account but why icloud saying i haven't?

i verified my account but why icloud saying i haven't?

Hello there, Cort262.
The following Knowledge Base article offers up some great information on how to troubleshoot when you are repeatedly prompted by iTunes to authorize your computer:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
https://support.apple.com/kb/TS1389
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Whats the maximum length array and why?

Whats the maximum length array and why?
I tryed to search the forum but most people was wondering about the maximun length of a String..

for(int i =20;i<=32;i++) {
     try {
          int[] p = new int[(int)Math.pow(2,i)];
          pause(2000); // So that gc doesn't clean away the array before
                          // The OS memory manager gets to update.
          System.out.println("Paused! i: " + i);
     } catch(OutOfMemoryError e) {
          System.out.println("Ex!!");
          pause(10000); // Same sa before.
void pause(int p) {
     try {
          Thread.sleep(p);
     } catch (Exception e) {}
}I worte this little code to test this.
It runs to 2^23 for me.
I am running
AMD Athlon, 512 DDR, Windows 2000 SP4
java version "1.5.0-beta2"
Java was using 42116 Kb RAM and 54632 Kb Swap when its at 2^23

How can i fix my iphone i can't update or download apps, when i try it tells me toput my credit card info and i do but when i push done it tells me my payment has been declined, but why do i have to pay to update or download free apps. How can i fix this?

how can i fix my iphone i can't update or download apps, when i try it tells me toput my credit card info and i do but when i push done it tells me my payment has been declined, but why do i have to pay to update or download free apps. How can i fix this?

You must contact iTunes support to get the problem resolved.
http://www.apple.com/support/itunes/contact/
If there is a problem with your account or payment info, you cannot
download anything (including free apps or updates) until the matter
is resolved.
In countries where the iTunes Store only sells apps, the accepted payment methods are Visa, MasterCard, and American Express. Other payment types such as gift cards, store credit, monthly allowances, ClickandBuy, and PayPal are not accepted. Depending on your App Store country, prices may be listed in your local currency, US Dollars, or Euros. http://support.apple.com/kb/HT5552

My ipod touch is stuck on the apple logo and after a while a white screen comes up and it restarts and the same thing all over agan. this happened to me before and after a while it turns on but why does it keep on doing this?

my ipod touch is stuck on the apple logo and after a while a white screen comes up and it restarts and the same thing all over agan. this happened to me before and after a while it turns on but why does it keep on doing this?

Try connecting the iPod Touch to your computer and restore it. http://support.apple.com/kb/HT1414

Keynote and pages are now free, but why do i need to pay for them still when there now free?!?

keynote and pages are now free, but why do i need to pay for them still when there now free?!?

Users can obtain the iWorks and iLife applications free, if they purchased a Mac after the beginning of October 2013.
Older Mac purchases require a paid purchase of these applications.

I am from Bangladesh. I can't log in with my gmail Apple ID. When I put in the mail and password, and press sign in, it says it has to review on iTunes. Then I am directed to opening a new account. But why should I , since I have one. Plz help :(

I am from Bangladesh. I can't log in with my gmail Apple ID. When I put in the mail and password, and press sign in, it says it has to review on iTunes. Then I am directed to opening a new account. But why should I , since I have one. Plz help

Hi Ishrak,
I apologize, I'm a bit unclear on exactly what you are trying to log into with your Apple ID, or what exactly you are seeing (alert message, directions, etc) when you try to do so. If you continue to have issues with your Apple ID, you may find one or more of the articles linked from the following page helpful:
Apple ID - Apple Support
Regards,
- Brenden

I just brought Macbook pro(without retina display) on 15 june 2013 and since then put it on 6-7 hours of charging but still my macbook pro is not 100% charged. but why? (green light is displayed on the adapter pin)

i just brought Macbook pro(without retina display) on 15 june 2013 and when i switched it on the battery was 72 % charged and now the battery is charged to 62%, i used the charger that came with it and kept it for 6-7 hours on charging but it is not charged to 100% but why? also the green light is always on when i plug the charger with my mac book pro.Please tell me the meaning of Green light on power cord lid (mac book pro not charging or charging?) and also the other light if there like amber or any other colour.

Hello Shailendras33,
Congratulations on your new MacBook Pro! Thank you for providing all the information about what is going on with the charging issue.
Firstly, I found some information on page 11 of the MacBook Pro User Guide about what each color of the LED means on the Power Adapter:
When you first connect your power adapter to your MacBook Pro, an indicator light on the
MagSafe connector starts to glow. An amber light indicates the battery is charging. A green light indicates that the battery is fully charged.
You can find the MacBook Pro User Guide here (this is not for the latest MacBook Pro, but the information about the MagSafe adapter is true for the newest model):
MacBook Pro User Guide
http://manuals.info.apple.com/en_US/macbook_pro_15inch_late_2011.pdf
It sounds like you are not getting the amber light indicating your computer is charging, and you are noticing that the battery level is depleting. I recommend resetting your System Management Controller when something like this is occurring:
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
You can find the full article here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

I can no longer down load on iTunes said I need a new payment method but why does my bank card no longer work how do I fix this

Hey everyone I can no longer down load or up date my games videos so on on iTunes
It's telling me I need a new payment method but why would my bank card no longer work how can I fix it so my bank card works again

how do i fix this

HT201272 I can see my previously purchase music, it says downloaded but why can't i download the music? The were accidentally deleted from the itune folder?

I can see my previously purchase music, it says downloaded but why can't i download the music? The were accidentally deleted from the itune folder?

Do I have to have icloud to download previously purchased music?

Maximum DHCP reached, but why?

Similar Messages

Maybe you are looking for