Maximum Number sapgui 710 install

Please let me know what is the maximum number of clients which can be deployed sapgui 710 , we have built Installation Server 710 on 4GB box. Please advise ..
Is phased approach of 50 at a time or should be go around 200 at a time , we are a very large client with more than 1000 box which needs to be on sapgui 710 very soon.

We are just now in a rollout phase.
We have an SAP installation server and use packages with CA software delivery (dont ask details)
My collegues do it department by department, i.e. some dozens per day
No problems with PCs sitting locally in 100mbit LAN, some problems with PCs sitting in WAN with bandwidths from 500 to 2000 kbit.
Some problems with users not willing to read the instructions...
So - it depends...
Watch if you get problems and do more and more...
HTH, Rudi

Similar Messages

  • CS3 master collection "maximum number of activations allowed...has been reached", previously installed on 2006 imac that has been disposed by managment, so no way to deactivate, any help?

    CS3 master collection "maximum number of activations allowed...has been reached", previously installed on 2006 imac that has been disposed by managment, so no way to deactivate, any help?
    my enduser id is 20037502 contract number 4400044113 invoice number 15267602

    Serial number and activation support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • Install HRCS9.0 and PT8.53 with Linux Issue: the files intiPT853.ora and initHRCS90.ora: maximum number of DB_FILES exceeded

    Folks,
    Hello. I have installed PeopleTools 8.53 with Oracle Linux 5.10 successfully. The entire PeopleTools  runs correctly in browser at the beginning.
    After I set up HCM and Campus Solution 9.0 Database Instance named HRCS90 in Linux successfully, PeopleTools 8.53 Database Instance PT853 cannot be mounted. Its error message is below:
    SQL> startup
    ORACLE instance started.
    Total System Global Area  538677248 bytes
    Fixed Size                  2146024 bytes
    Variable Size             528482584 bytes
    Database Buffers            4194304 bytes
    Redo Buffers                3854336 bytes
    ORA-00059: maximum number of DB_FILES exceeded
    In the file /home/user/OracleDB_Home/dbs/initPT853.ora, its parameter db_files has 3 values: small 400, medium 1021 and large 1500. The initial value is 1021 and it works correctly at the beginning.  But after set up another instance HRCS90, the above error message comes up and instance PT853 cannot mounted. I change the value of db_files from 1021 to 1500 in the file initPT853.ora and restart OS Linux. But get the same error as below:
    SQL> startup
    ORACLE instance started.
    Total System Global Area  538677248 bytes
    Fixed Size                  2146024 bytes
    Variable Size             528482584 bytes
    Database Buffers            4194304 bytes
    Redo Buffers                3854336 bytes
    ORA-00059: maximum number of DB_FILES exceeded
    In the file /home/user/OracleDB_Home/dbs/initHRCS90.ora, its parameter db_files has 3 values: small 80, medium 400 and large 1500. I use db_files=400 and it works correctly. I start up instance HRCS90 right after the above error message as below:
    SQL> shutdown immediate
    ORA-01507: database not mounted
    ORACLE instance shut down.
    SQL> exit
    Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    [user@userlinux bin]$ export ORACLE_SID=HRCS90
    [user@userlinux bin]$ ./sqlplus / as sysdba
    SQL*Plus: Release 11.1.0.6.0 - Production on Sat Nov 23 12:40:02 2013
    Copyright (c) 1982, 2007, Oracle.  All rights reserved.
    Connected to an idle instance.
    SQL> startup
    ORACLE instance started.
    Total System Global Area  538677248 bytes
    Fixed Size                  2146024 bytes
    Variable Size             528482584 bytes
    Database Buffers            4194304 bytes
    Redo Buffers                3854336 bytes
    Database mounted.
    Database opened.
    SQL> select * from psdbowner;
    DBNAME   OWNERID
    HRCS90     MYNAME
    SQL>
    As we see above, the instance HRCS90 works corretly and PT853 cannot start up. The parameter DB_FILES of the file initPT853.ora has an issue.
    My question is:
    Because 1021 and 1500 are not enough to startup instance PT853, what value should be used for DB_FILES of the file initPT853.ora  ?
    Thanks.

    user8860348 wrote:
    Folks,
    Hello. I have installed PeopleTools 8.53 with Oracle Linux 5.10 successfully. The entire PeopleTools  runs correctly in browser at the beginning.
    After I set up HCM and Campus Solution 9.0 Database Instance named HRCS90 in Linux successfully, PeopleTools 8.53 Database Instance PT853 cannot be mounted.... 
    I'm sorry, but I don't understand what does "Instance" mean here.
    >In the file /home/user/OracleDB_Home/dbs/initPT853.ora, its parameter db_files has 3 values: small 400, medium 1021 and large 1500.
    Are you not using a spfile ? Does the file contain really the 3 values ? What is the last ? Have you checked the value in the database side "show parameter db_files" ?
    >But after set up another instance HRCS90, the above error message comes up and instance PT853 cannot mounted
    Again, I have no idea what it means.
    >In the file /home/user/OracleDB_Home/dbs/initHRCS90.ora, its parameter db_files has 3 values: small 80, medium 400 and large 1500. I use db_files=400 and it works correctly.
    Again, 3 values ? What is the last ? Have you checked the value in the database side "show parameter db_files" ?
    >As we see above, the instance HRCS90 works corretly and PT853 cannot start up. The parameter DB_FILES of the file initPT853.ora has an issue.
    Again, I don't understand what are HRCS90 and PT853 exactly. Cannot help.
    >Because 1021 and 1500 are not enough to startup instance PT853, what value should be used for DB_FILES of the file initPT853.ora  ?
    I'm sure, you don't have an issue with this parameter, 1500 files in the database is quite huge number. I built a demo recently, the default value 1021 was ok for me. You should have done something wrong somewhere.
    Nicolas.

  • Installed SAPGUI 710

    I've installed SAPGUI 710 and by default two systems are showing in the logon pad, namely Cairo & Portal, which belongs to California State University, Chico. When I click login SAP login screen appears. My question is from where these SAP servers showing on the logon pad, if it is provided by SAP by default then what is the id & password for these?

    Check the System Folder C:\WINDOWS Inside One notepad name as SAPLOGON. It contains the SAP Logon pad entry details.
    If you delete or modify the file it will reflect to SAP Logon.
    Problem was may it not updated when you install SAPGUI 710 or Folder contains previous SAP user logon information.

  • Install SAPgui 710 on Windows 2000 SP4

    Hi,
    I try to install SAPgui 710 on Windows 2000 SP4. But when i launch SetupAll.exe, window "SAPgui install master" does not appear.
    Although, Install SAPgui 640 on Windows 2000 SP4 is success.

    Hello Sergey
    please be sure that the INTERNET EXPLORER 6  is installed on the W2k Clients!
    If not, then the new NWSapsetup can not start!
    Many of my messages in the OSS with same error description had under W2k the problem that the IE there was not in version 6.
    If you can not solve this problem by yourself, please open a message in "OSS" under BC-FES-INS !
    Best Regards
    Sven

  • SAPGUI 710 + BW3.x run-time error

    Hi all,
    I'm having a problem that is driving me completely crazy. I have a combination of systems available (Windows XP or Vista and Office 2003 or 2007) and they are all causing the same error for me.
    As I write this I am using Windows Vista with SAPGUI 710 and office 2003, however as mentioned before the same error occurs with SAPGUI 710 and XP for me (different machines)
    I have installed 710 with all the options from the files:
    50083078_2
    50083078_4
    50083078_5
    As instructed from the distribution center. I then installed support package 1 (gui710_1-10002995).
    When I run BEx Analyzer 3.x, create a new query, and try to restrict a characteristic using a variable (in this case a selection option) as i drag the variable from the available list to the selection i get several of these messages:
    Run-time error '-2147417848 (80010108)':
    Automation error
    The object invoked has disconnected from its clients.
    Followed by:
    Run-time error '440':
    Automation error
    Searches for these have yield me no results for 710 in combination with Vista or XP.
    Thanks in advance.
    Dez

    Vidya,
    Goto http;//service.sap.com click on SAP Support Portal, you are going to need an 'S' number to login. Once you have logged in goto 'Help & Support', 'Search for SAP Notes' and in the top right where it says 'Number' enter the note number.
    Cheers,
    Dez

  • Illustrator won't run: "unable to set maximum number of files to be opened"

    I have an intel macbook pro (core duo with 2GB ram) and a copy of purchased adobe creative suite 2. Other applications in the suite like photoshop, acrobat, etc can run on my mac without any problem. But when I try to run illustrator, it just shows an error message "Unable to set maximum number of files to be opened" and quits. I also installed a trial version of illustrator cs3 and got the same problem. Can anyone help? Thanks.
    CC

    Hi, I realize this is an old thread but it was unanswered and the issue has come up again in a newer thread:
    http://forums.adobe.com/message/2534652
    If the original poster sees this, can you reply tin the new thread and let us know if you were ever to solve this problem?
    Thanks!

  • I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel rec

    I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel receive the same message.Some one can tel what to do please? Thanks

    Hi Memalyn
    Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
    My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
    If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
    Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
    Let us know what you find out, and if you manage to get your space back.
    Matt

  • Which is the maximum number of simultaneous IP sessions on 7600 with/out SAMI?

    Please I need help from someone who has ever wondered and get to know the maximum number of simultaneous IP sessions on 7600.
    On the documentation, this is the applicable information that we find regarding the number of sessions:
    http://www9.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_acess_sub_sessns_ps6922_TSD_Products_Configuration_Guide_Chapter.html
    Beginning in Cisco IOS Release 12.2(33)SRE, the Cisco 7600 router supports IP subscriber sessions only on the SIP400 and ES+ line cards
    The Cisco 7600 router enforces limits on the number of IP subscriber sessions per line card and router chassis. If the number of active sessions exceeds the following limits, an error message displays:
    - Cisco 7600 chassis—32,000 subscriber sessions (supported in Cisco IOS Release 12.2(33)SRE1 and later releases)
    - ES+ line card—4000 subscriber sessions per port group; 16,000 sessions per line card (supported in Cisco IOS Release 12.2(33)SRE and later releases)
    - SIP400 line card—8000 subscriber sessions (supported in Cisco IOS Release 12.2(33)SRD4 and later releases)
    Let us suppose that we use the SIP400 line card, since ES+ is far from our networking requirements.
    Please confirm/answer the following:
    No special license is required to use ISG with SIP400.
    Is the 8000 session limitation per SIP400 module or per SPA attached to it?
    I read in the documentation, that the SAMI card enhances the maximum number of ISG sessions:
    http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_sup_sami_blade.html
    The ISG Support for SAMI Blade feature combines the subscriber management features and functions of the Cisco Intelligent Services Gateway (ISG) with the processing power of the Cisco Service Application Module for IP (SAMI). The Cisco SAMI blade has six PowerPC (PPC) processors and occupies just one slot in the Cisco 7600 series router. This means that you can support many ISG features for up to 600,000 subscribers on a single router. 
    We then assume that the SAMI blade overcomes the limitations noted above: 32,000 session/chassis and 8,000 sessions/SIP400. Correct?
    No extra license is required to use ISG with SAMI.

    How I can load a license in a home agent (modulo SAMI), which is installed in a 7606-S router?.

  • SAPGUI 710 Graphical Layout Editor not available in LAN

    Hi,
    I recently installed sneakpreview NW04s for ABAP at home and the SAPGUI 710 software. The graphical layout editor doesn't work. I have checked all requirements such as, required dll and exe files. They are all available. The problem occurs only when I try to start the graphical editor from another pc in my LAN. If I start it on the application server where I have installed NW04s and the SAPGUI, it works fine. Only when I access to the application server from other pc in my home network, it fails to start the graphical editor. I've read that there must be a problem with firewall / port somewhere. I don't know where I can check whether this is the cause. I am using D-Link wireless for my home network.
    Can anybody help me with this?
    Thanks in advance,
    Shahram

    I tried SM59 and ran a connection test for EU_SCRP_WN32. It started gnetx.exe, the window appeared shortly. But, the connection failed with the following error message:
    ERROR                timeout during allocate                        
    LOCATION             SAP-Gateway on host OFFICE / sapgw00           
    DETAIL               no connect of TP gnetx.exe from host %%SAPGUI%%
    COMPONENT            SAP-Gateway                                    
    COUNTER              5824                                           
    MODULE               gwr3cpic.c ;                                    
    It seems that my laptop cannot establish an RFC connection to the application server. the service file on my laptop has the right entry for the application server.
    Any ideas?

  • Syncing & maximum number of devices for one app?

    I am setting up five iPads for a small business.  They are supposed to be identical -- same Apple ID for all of them, same apps, files, settings, &c.  I am still working out some of the syncing and access restriction settings.  However the business posed a question to me, and I haven't been able to find an answer online:
    If an app is purchased once, on how many devices may it be installed?
    That is, if an app is purchased for this business on one iPad, can it be downloaded onto the other iPads without further payment?  Is there a maximum number of iPads onto which an app can be installed, with additional devices incurring extra fees?  Would this number vary by app, and if so, is there a way to find out the maximum before purchasing and installing the app?

    http://support.apple.com/kb/ht4627

  • Error:- ORA-01795: maximum number of expression in a list is 1000

    Hi All,
    we are using database 11g.
    Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
    i am getting one error while selecting the data from table.
    SELECT interco_type, entity, chapter_entity, tran_currency, source_id_entity,
    tran_id_entity, mirror_id, gaap_type, counterpart
    FROM t_gri_reconid_dtl_agg_gcr;
    or
    select * from t_gri_reconid_dtl_agg_gcr where rownum = 1 ;
    Error:- ORA-01795: maximum number of expression in a list is 1000 ( error is same in both the case )
    Please help me if any body got to this situaltion.
    regards
    shyam~

    Hi,
    thanks for your response.
    i dont have VPD and FGAC installed in my desktop.
    select * from all_objects where object_name=upper('t_gri_reconid_dtl_agg_gcr');
    here is the few rows from the above query as there are lot of rows. Please let me know if you need more rows.
    PUBLIC     T_GRI_RECONID_DTL_AGG_GCR          10114957          SYNONYM     26-NOV-12     26-NOV-12     2012-11-26:22:09:41     VALID     N     N     N     1     
    GCRGRIT$OWNER     T_GRI_RECONID_DTL_AGG_GCR     GRI_1     10114668     10320109     TABLE PARTITION     26-NOV-12     28-JAN-13     2012-11-26:22:02:14     VALID     N     N     N     1     
    GCRGRIT$OWNER     T_GRI_RECONID_DTL_AGG_GCR     GRI_10     10159558     10320125     TABLE PARTITION     12-DEC-12     28-JAN-13     2012-12-12:16:51:49     VALID     N     N     N     1     
    GCRGRIT$OWNER     T_GRI_RECONID_DTL_AGG_GCR     GRI_1003     10255173     10322000     TABLE PARTITION     15-JAN-13     28-JAN-13     2013-01-15:00:02:58     VALID     N     N     N     1     
    GCRGRIT$OWNER     T_GRI_RECONID_DTL_AGG_GCR     GRI_1004     10255219     10322002     TABLE PARTITION     15-JAN-13     28-JAN-13     2013-01-15:00:05:29     VALID     N     N     N     1     
    GCRGRIT$OWNER     T_GRI_RECONID_DTL_AGG_GCR     GRI_1005     10255263     10322004     TABLE PARTITION     15-JAN-13     28-JAN-13     2013-01-15:00:09:36     VALID     N     N     N     1     
    GCRGRIT$OWNER     T_GRI_RECONID_DTL_AGG_GCR     GRI_1006     10255311     10322006     TABLE PARTITION     15-JAN-13     28-JAN-13     2013-01-15:00:12:40     VALID     N     N     N     1     
    GCRGRIT$OWNER     T_GRI_RECONID_DTL_AGG_GCR     GRI_1007     10256040     10322008     TABLE PARTITION     15-JAN-13     28-JAN-13     2013-01-15:06:41:32     VALID     N     N     N     1     
    GCRGRIT$OWNER     T_GRI_RECONID_DTL_AGG_GCR     GRI_1008     10256200     10322010     TABLE PARTITION     15-JAN-13     28-JAN-13     2013-01-15:08:03:39     VALID     N     N     N     1     
    GCRGRIT$OWNER     T_GRI_RECONID_DTL_AGG_GCR     GRI_1009     10256241     10322012     TABLE PARTITION     15-JAN-13     28-JAN-13     2013-01-15:08:08:42     VALID     N     N     N     1     
    GCRGRIT$OWNER     T_GRI_RECONID_DTL_AGG_GCR     GRI_1010     10256294     10322014     TABLE PARTITION     15-JAN-13     28-JAN-13     2013-01-15:08:17:15     VALID     N     N     N     1     
    GCRGRIT$OWNER     T_GRI_RECONID_DTL_AGG_GCR     GRI_1011     10256337     10322016     TABLE PARTITION     15-JAN-13     28-JAN-13     2013-01-15:08:20:12     VALID     N     N     N     1     
    GCRGRIT$OWNER     T_GRI_RECONID_DTL_AGG_GCR     GRI_1012     10256393     10322018     TABLE PARTITION     15-JAN-13     28-JAN-13     2013-01-15:08:25:29     VALID     N     N     N     1     
    GCRGRIT$OWNER     T_GRI_RECONID_DTL_AGG_GCR     GRI_1013     10256434     10322020     TABLE PARTITION     15-JAN-13     28-JAN-13     2013-01-15:08:28:25     VALID     N     N     N     1     
    GCRGRIT$OWNER     T_GRI_RECONID_DTL_AGG_GCR     GRI_1014     10256475     10322022     TABLE PARTITION     15-JAN-13     28-JAN-13     2013-01-15:08:32:11     VALID     N     N     N     1     
    GCRGRIT$OWNER     T_GRI_RECONID_DTL_AGG_GCR     GRI_1015     10256516     10322024     TABLE PARTITION     15-JAN-13     28-JAN-13     2013-01-15:08:37:25     VALID     N     N     N     1     
    GCRGRIT$OWNER     T_GRI_RECONID_DTL_AGG_GCR     GRI_1016     10256557     10322026     TABLE PARTITION     15-JAN-13     28-JAN-13     2013-01-15:08:39:29     VALID     N     N     N     1     
    GCRGRIT$OWNER     T_GRI_RECONID_DTL_AGG_GCR     GRI_1017     10256607     10322028     TABLE PARTITION     15-JAN-13     28-JAN-13     2013-01-15:08:43:24     VALID     N     N     N     1     
    regards
    shyam~

  • Maximum number of dialog work process

    Hello gurus,
    Could you please let me know what is the maximum number of dialog work process that you can configure in an Netweaver system with ABAP 7.0 before considering to install a new application server to distribute the load?
    Thaks for your help,
    Best regards

    > Just one question, according to the following statement, can I think that I should estimate a usage of 1/4 CPU core by every dialog WP?
    No, this was just an example to make clear what I mean.
    > Do you know any SAP note that could help me to estimate the number of WP according to the load of the system?
    There is no such note and there can't be.
    You could have a system with e. g. 100 users where 10 of them do really produce load, the other 90 may just run a few transactions or do just nothing - so 50 WPs is too much. You could also have a system with 20 users where ALL are entering data all data and doing reporting and stuff so 20 WPs is too less. There may also be processes like ATP that use one background worprocess and spawn a number of dialog WPs you configure in the application. If you configure too few of them, the ATP run will run very log, if you configure too much, the system will be overloaded and slowing down. I can imagine dozens of other examples what may cause load or not.
    Because of that it's not possible to give a formular how many WPs to be configured for how many users.
    This is a tuning thing and needs to be estimated in the first weeks after a GoLive; watch the system, reconfigure, watch. Check ST03N and SM50/SM66 or book an early watch after some time, they have rough estimates and give usually good advises. Out of theory it's almost impossible to predict something.
    Markus

  • Maximum number of developer application on my phone reached

    Hi , i am developing an app in c# for windows phone , i run my code in my phone , after two app that i run in my phone , it shows me error :
     Unable to install application. The maximum number of developer applications on this phone has been reached. Please uninstall a developer application and try again.
    how can i uninstall a developer app in my phone ??
    tnx

    Hi,you can uninstall
    a developer or any app from your phone do following steps,
    1)Go In the App
    list, tap and hold an app or game, then  you tap Uninstall.
    2)When asked for confirmation,tap
    Yes,to uninstall app.
    Don't
    forget to mark the right answer and vote up if helps you.
     

  • [Project Server 2010] Maximum Number of Job processor Threads in the queue settings

    Hello,
    I have a farm with SharePoint 2010 and Project Server 2010 installed. The farm contains:
    2 web front end servers
    3 application servers
    Each servers has 4 processors
    The SQL databases are installed on our database servers.
    The Microsoft Project Server Queue Service 2010 is started on the 2 web front end servers and on 1 applicative server.
    We have two instances of PWA are installed on this farm.
    I have calculated that the number of availabe processors we could have on this farm is : 4 processors X 3 application servers (the ones where the project queue is started) = 12. Is that correct? I'm not sure of the definition of the applicaton
    server that is used in
    this article )
    If I set the Maximum Number of Job Processor Threads (in the queue setting) to 2 per queue and per instance. We could have 2 Job processor X 3 application servers X 2 pwa instance = 12 threads to operate at the same time, is it correct?
    If yes, do you think this is a too high number of threads?
    Thanks for your help
    Aline

    Hi Aline,
    These settings are for fine tuning the servers, and are only one of many performance parameters.  If you notice the response from the server is slow, regarding Queues, then I would think about amending these upwards, but also with a careful eye on processor
    utilisation.  If you up the thread count and the system isn't any more performant, then I would look elsewhere for perf improvements.  Before you do anything of course, baseline the performance of the system.
    Ben Howard [MVP] | web |
    blog |
    book | P2O

Maybe you are looking for