Maximum Text Length of FS Item

Hi
I have recently noticed that when we Load From Stream to update FS Items in BCS from a BI infoobject, the Long Text value is truncated at 45 characters.
The infoobject being read has long text set to 60 characters, and the BCS infobject being written to has long text set to 60 characters, however the read from stream seems to have an embedded 45 character maximum.
The FS Items text can be updated manually up to 60 characters, however in the read from stream log, in the source data it is only reading 45 characters of the long text.
Is 45 characters a standard maximum permissable - or does this sound like a bug ?
Thanks

Thibaud - thanks for this. I foolishly searched OSS with "Long Text" and BCS, and this note didn't show up. I shoud have used Long Text and Datastream.

Similar Messages

  • PO Header Maximum Text Length

    Dear Friends,
    Can anybody tell me what is the maximum length of the PO header text.
    Tks
    Sujith

    I guess there is no specific restriction on that.

  • Maximum text length

    I have this code:
    JFormattedTextField jft=new JFormattedTextField(new MaskFormatter("###"));I thought that this will allow text to be maximum length 3 but this code actually demands that length must be exactly 3 numbers.
    How do I make that I can type maximum 3 numbers?

    did you try
    formatter.setPlaceholderCharacter(' ');on your formatter to set the unused space to blank?

  • Maximum Allowed Text Length for JTable Column

    Can you please help me with a JTable Doubt
    How do I set the Maximum Allowed Text Length for a Particular Column of a JTable?

    Thanks a lot mate. I used the following
         class MaximumLengthFilter extends DocumentFilter {
                   public void replace(DocumentFilter.FilterBypass fb, int offset, int length,
                             String text, AttributeSet attr) throws BadLocationException {
                        if ((fb.getDocument().getLength() + length) < 10)
                             fb.replace(offset, length, text, attr);
                        else
                             Toolkit.getDefaultToolkit().beep();
              }

  • How to increase maximum input length of a short text object in SE63

    Hi All,
    In se63 translation transport when a object name is provided for short text translation, fields like technical information, modified/ Decision Required and maximum input length are displayed, how can maximum input length of a text can be increased if we want to enter more characters than specified in the maximum input length field.
    Regards,
    Shruthi

    Increase the length of the source field, which you are translating..
    Cheers!
    Mishra

  • Issue with row/column text lengths in report painter

    Hi Gurus,
    I have created a report painter report with formatting of the row/column length text as medium, but for one FS item/GL Account the report when executed still picks up only the short text length. I am not sure how this can be resolved.
    Any ideas is appreciated.
    Regards
    Satish

    Applied OSS Note 360096 and it worked. Thanks for all your help.

  • Unity 7.02 maximum message length only 30 secs

    Unity 7.02 maximum message length is approx 30 secs regardless of the settings in sys admin.
    Has anyone encountered this issue?

    Hi Peter,
    It sounds like you may be running a Demo License;
    Limits on a Cisco Unity Demonstration System
    Depending on the type of license file you use-Default License File or Time-Limited License File-the Cisco Unity demonstration system will have the limits listed below.
    Default License File
    •10 languages
    •2 RealSpeak text-to-speech (TTS) sessions
    •10 mailboxes for one of the following subscriber types:
    -Unified Messaging (UM) subscribers
    -Voice Messaging (VM) subscribers
    •10 Cisco Unity Inbox subscribers
    •2 voice ports
    •2 voice-recognition sessions
    •30-second limit for messages
    •The ability to integrate with any supported phone system
    Time-Limited License File
    The time-limited license enables either Unified Messaging (UM) or Voice Messaging (VM) with the following limitations:
    •UM feature package
    -50 UM subscribers with 16 sessions
    -2 RealSpeak text-to-speech (TTS) sessions
    -2 languages
    -AMIS
    -16 voice ports
    -2 voice-recognition sessions
    •VM feature package
    -50 VM subscribers with 16 sessions
    -2 RealSpeak text-to-speech (TTS) sessions
    -2 languages
    -25 Cisco Unity Inbox users
    -16 voice ports
    -2 voice-recognition sessions
    The time-limited license includes the following additional limitations:
    •Time limit (after which Cisco Unity stops handling calls)
    -60 days
    -90 days
    •Only one license file on the Cisco Unity server is permitted
    •Non-renewable
    •Locked to the specific MAC address of the network interface card (NIC) on the Cisco Unity server
    •The ability to integrate with any supported phone system
    http://www.cisco.com/en/US/docs/voice_ip_comm/unity/7x/release/notes/702curelnotes.html#wp49973
    Hope this helps!
    Rob

  • How set maximum character length in Fxml

    Hey can any body help me set Maximum character length in Fxml.
    thanx in advance

    I wrote my own TextField.
    I can't give you the code right now, but it's easy to create it by yourself.
    0 - create a private method that deletes any unwanted char/s: restoreRightLength();
    1 - Add a listener on the textProperty of your TextField/TextArea that calls restoreRightLength() method.
    2 - Override  the following methods:
    @Override
    public void replaceText(int start, int end, String text) {
    super.replaceText(start, end, text);
    restoreRightLength();
    @Override
    public void replaceSelection(String text) {
    super.replaceSelection(text);
    restoreRightLength();

  • Length of library item dragged into timeline

    Is there a way to control the length of an item insterted into the timeline in AE CS4? I have a number of images and text items that I am creating and insterting into a composition and everytime a new item is insrted or created it automatically makes it the length of the composition where I only want to be inserted at a specific point on the timeline.
    I'm having to manually change the start and end points everytime and its taking me ages, can anyone help??
    Thanks

    The duration for still images can be defined in the prefs' import and file handling section. For text the behavior is "as designed". I don't see it as a problem, though, that's what the various layer shortcuts as listed on this page are for. No need to use the mouse to trim layers at all once you get the hang of it...
    Mylenium

  • Text on path: How can I calculate the text length?

    Hi
    I have a text on path (spline item). Now I need the length of this text and the length of the spline item.
    I try to calculate the text length using IWaxLine::GetWidth(), but this is always 0.
    - How can I calculate the length of this text?
    - How can I calculate the length of the spline item?
    Thanks
    Hans

    It would be interesting if you could describe the purpose of your "length", but I don't have an answer anyway. Would the bounding box be sufficient?
    Considering that TOP may be combined with arbitrary spline paths, this could become an exercise in higher math. I haven't yet encountered a function that returns the mathematical length of such a spline.
    Otherwise it could be solved if you iterate and sum up the relevant points of the bounding box (ascender, descender, baseline?) of individual glyphs.
    Be warned that the whole TOP looks alien, as if it were a transplant from a different program. Experience also shows that documented and actually used interfaces / commands are completely different animals ...
    Dirk

  • Text in PO(text tab in header & item) is not shown in the Print Preview

    Hi Guys,
                I face a problem in ME23N.Text maintained in Purchase Orders (text tab in header & item)  is not shown in the Print Preview.
                Can you guys help.Do I need to write a subroutine pool for this.
                <<text removed by moderator>>
    Regards,
    Rajiv
    Edited by: Matt on Nov 12, 2008 1:20 PM

    Hi ,
    Use bapi bapi_po_getdetail .
    CALL FUNCTION 'BAPI_PO_GETDETAIL'
        EXPORTING
          purchaseorder   = is_ekko-ebeln
          item_texts      = c_x
          header_texts    = c_x
        TABLES
          po_header_texts = it_header_text
          po_item_texts   = it_item_text.
    Regards
    Neetesh

  • Getting Item Text  from sale order items

    Hi All,
    I am trying to get sale order item text using Include text in smartforms.
    my text object  is VBBP and my text id is 0004.
    What should I pass in Text Name  ?.---Order Number or Item Nunmber or Both.
    If both can you guys explain how to pass both ?.
    will be REVARDED.

    Hi,
    When you see the texts in the line item of va03..
    Double click on the text..
    Then in the menu..Goto -> Header..
    There you can find the Text name..
    Generally if it is Item text..Then the text name will be
    order number + line item
    Thanks
    Naren

  • "Maximum Session Length in Seconds" Not Working In Apex 3.2

    Hello.
    I am using Apex 3.2 and have noticed that pages are session timing out after just 10 minutes of inactivity. I am aware of the new security attributes "Maximum Session Length in Seconds" and "Maximum Session Idle Time in Seconds".
    I asked our Apex admin and he reported that these attributes are set to 8 hours on the instance level. Within my own Apex application, these two attributes are not set at all. According to the popup help window associated
    with these attributes, if they are not set, then there is no timeout at all that is enforced.
    So, does anyone know why my application pages are session timing out after just 10 minutes of inactivity and users are forced to login again?
    Thank you.
    Elie

    Scott,
    Thank you for your help on this.
    I've uploaded my Apex app called "Online Model", App ID 62063 in my workspace EEG on the Oracle hosted site apex.oracle.com.
    Workspace = EEG
    Username = [email protected]
    Password = galaxy (I'll change the password after you're done helping me)
    Orginally, this app had "Database Authentication" set. I changed this to "DAD Authentication" so that you can simply run it without having to login.
    If I open up the app in developer mode and simply leave it alone for, say, 30 minutes and then click on the "developer bar" to see the definition of one of the pages, Apex instead prompts me to re-login again into Apex. I've not placed any values in any of the "Session Timeout" fields on any of the pages in this app.
    When the same app is run as a user (that is, no "developer bar" appears at bottom of pages), again the page will time out after about 30 minutes of in-activity.
    And as mentioned in my original posting, our Apex Admin has the "Administrator Timeout Session" field set to 8 hours.
    The Apex 3.2 docs say that if no value is placed in these Timeout Session fields, then there is no timeout imposed.
    Thank you for your help. It's much appreciated.
    Elie

  • Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust one and then have to copy and paste this length.

    Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust a text clip and then have to copy and paste this each time. Ideally, there should be something in User Preferences but there is not. Thanks.

    Maybe some one else can pipe up with a solution, but this would literally take 2 seconds to do for a new project.  And you can create a "template project" that includes this "text" clip.  Save this project and then to a get info and check "stationary pad."  When you double click on this file, fcp will open with a copy of this project and you just need to do a save as. 
    I've been working with computer editing systems for longer than i can remember and at a certain point you just have to adapt your workflow to the limitations of the software.  

  • How to load long text in BOM line item

    Hello Experts
    How do i load Long text in BOM Line item using LSMW
    Thanks
    S
    Edited by: Alvaro Tejada Galindo on Jan 31, 2008 5:11 PM

    Use Read_text function module.
    you need to pass
    ID
    LANGUAGE
    NAME
    OBJECT   to the function moduel
    To find the Text id name language and object these are the following steps. Example: FB02
    1. goto FB02, Enter Document number
    2. from menuselect Goto>Header-->header Text..... New window will be displayed 
    3. select the Header Text. here you can see all the text. 
    4. click on the TEXT (which you want to know the Text id) , then press log ICON (you can find in bottom right of the text window) it looks like a rolled paper. 
    5. in the Next window you will find Text Name. Text ID, Language. etc...
    Regards,
    Lalit Mohan Gupta.

Maybe you are looking for

  • Can you program a Slave's Node ID or Zone ID using the USB-8476 as the LIN Master?

    I am planning on using the USB-8476 LIN interface as the LIN bus Master in an application.  The application would require the USB-8476 (Master) to program a Node ID and Zone ID into a slave device that is on the LIN bus.  The slave device is a PIC12F

  • Help needed regarding illegal start of expression

    Hi all, i'm new to java programming and this forum, i tried to compile the code but the compiler keeps getting illegal start of expressionpublic int getX() { the following is my code: import java.awt.*; import javax.swing.*; class Swatches {      pub

  • Moving a drive from a NAS200 Question

    Im thinking of moving from a NAS200 to one of the newer models with Gigabit. Can I move the drives from the NAS200 to the newer models without having to reformat? Jorge Solved! Go to Solution.

  • Table for Vendor Master Email ID

    Hello, Can you please tell me the table where Vendor Email ID is stored and also how to connect it from LFA1-ADRNR in ECC 6.0? Thanks, Venu

  • Where is "Import Data" in v3?

    Question: I can't seem to locate the V2 "Import Data" section in V3 UI. Can someone tell me where it is? Answer: V3 will not have a centralized page for imports. Instead, the import functions/screens will be distributed to their corresponding areas (