MB26 pick list issue

Hi,
Against production order reservation number we are doing goods issue in MB26. We do GI for few components and the remaining later. I posted say 10 out of 25 components, when i try to post the remaining components (15) against the same reservation number, i am getting the error message " no goods movement can be selected".
Cross checked the production order. for the issued materials final issue is checked.
Still for the remaining components, the quantity are open. could anyone suggest how to approach for this issue?

The material with backflush tick does not comes in Picklist report. This material will get issue when you do the confirmation. Click on Goods movement screen in confirmation scree you will see all this 10 materials there. If you want to issue this material through Pick list you have to remove the Backflush Indicator. Remove it from Production Order & then check MB26

Similar Messages

Storage Type and storage bin in MB26 pick list

Hi,
We want to print a pick list using MB26. The pick list should contain the warehouse number , storage type and storage bin. I have found that in the layout of MB26 pick list, we can pull these fields. However, the values of these fields are not getting pulled in the list.
Can you please help me to understand if I need to do some setting/config so that warehouse number, storage type and storage bin can be pulled in the MB26 report.
Thanks,
Shekhar

if it is a standard output if you go to the output type you can see what are the standard fields included in the pick list but if it is a custom one please contact your functional consultant who designed or look at the spec to see the design/mapping of fields.
Please let me know if thhis helps.

Picking List / Material issue slip

Kindly let me know the process of printing a Picking list / Issue Slip for a material issue from a DBM Service order.

Dear Babudhar,
There are no standard actions delivered to print any picking lists along with DBM 6.0.
An event call be built in (to print the list) which could be linked to Confirm event as a subsequent event. So, as soon as the order if confirmed, the new event can print the list for you.
Hope this info helps.
Best regards,
Harsha

Picking list - MB26

What is the use of picking list ..T -code MB26. ? Can I print it automatically when the material is available ?

Hi,
The picking list is used for stores. We use it to issue goods from stores to production order. are stores person runs it, uses batch determination and prints the list out goes and picks the materials from stores and then issues it using this list.
Please award points if helpful
Kind Regards
Adeel

Good issue against pick list

Hi,
I have requirement to track the goods issued to production with reference to the order/pick list. The goods are moved from warehouse to production location using 313 mvt and received at production storage location using 315, Once the consumption recordings are completed and any stock remaining at the production storage location, we need to identify against which order this stock belongs to. WM is implemented for the main store but production store is not part of the WM.
Regards
Cheru

Hi Jatin,
The requirement is to move the stock from main warehouse to the production store. We want to issue the goods against the pick list from main warehouse to production store. The ware house will do the goods issue against the pick list and the production will receive the goods at their storage location. So we could track what goods issued against which pick list. Once the goods are at the production location, consumption will recording will be done against the production order. We do not want to do the goods issue against pick list from the warehouse using mvt 261.
Regards
Cheru

After EHP6 Upgarde Picking list print out is resulting format & overlapping issues

Hi All,
We have recently upgraded our system from ECC 6.0 to EHP6 .Now when user trying to print a Picking list document then Print out is overlapping with content .
But when we check the spool the Print Priview looks good but when trying to print the content is overlapping & observed the font size is chaned i.e. the content is displayed in Bold format .
But for those spools which were created before upgarde & when we give a print then Print out is fine. So some thing happend after upgrade that causing us the Print out problem .
we are using device type HPLJ4 & try to print Picking list output and it is causing problem.
Kindly provide your suggestions.
Thanks and regards,
Dilip

Hello Peng Wen,
Thanks for your reply and yes the issue got resolved . Actually we are using a custom device type ZHPLJ4 which is a copy of HPLJ4 . But as part of Upgrade ZHPLJ4 HELVE with scalablity is no longer supported. So we have removed the entry from SE73 as it even doesnt exist in HPLJ4 . Now it is working as expected.
Thanks a lot for your replay.
Thanks and regards,
Dilip

Picking list grouping issue.

When we print a picking list for deliveries we get the list grouped by material. So for example, if the delivery item 10 and 40 both have the same material then item 10 and 40 will be printed one after the other. So far all is okay, except that when the materials are the same the material details are not printed for the second line item. I think this is controlled by the SAP print program that probably is not calling the 'MAT_LINE' process.
Now there is a sneaky way around this, by maybe adding the MAT_LINE details into the POS_LINE process so that when the process for POS_LINE is called, which it is in all events, then the material and pos details are printed. However, I should not have to do this.
I was wondering if there was anyway to control the grouping. I still want the materials to be grouped, as that makes sense for the pickers, but I want to see the material details on the list and not have them supressed because it's the same as the material above.
Jason

Moved element Item_line content into the POS_line element and remarked out the item_line element. All now works.

Delivery Notes Generation Via Pick List

Am trying to generate delivery notes off pick tickets and i can't find any code example. I now came up with the following code but am having issues when items are in multiple Bin Locations.
Public Sub Sales2Delivery() '(ByVal OrderID As String)
        Dim OrderID As String = ""
        Try
            Using connection As New SqlConnection(StaginConn)
                'Dim command As New SqlCommand("SELECT DocEntry from ORDR with (nolock) WHERE NumAtCard = '" & OrderID & "'", connection)
                Dim command As New SqlCommand("SET DATEFORMAT DMY; select distinct top 5 o.DocEntry, o.NumAtCard from ordr O with (nolock) join RDR1 R with (nolock) on R.DocEntry = O.DocEntry join OPKL P with (nolock) on P.AbsEntry = R.PickIdNo where u_shipstate = 'Delivered' and CAST(O.docdate as date) >= '30/04/2014' and P.Status = 'Y';", connection)
                connection.Open()
                Dim reader As SqlDataReader = command.ExecuteReader()
                ' Call Read before accessing data.
                While reader.Read()
                    Dim BusinessOrders As Documents = DirectCast(vCompany.GetBusinessObject(BoObjectTypes.oOrders), Documents)
                    Dim BusinessDelivery As Documents = DirectCast(vCompany.GetBusinessObject(BoObjectTypes.oDeliveryNotes), Documents)
                    Dim orders As Documents = BusinessOrders
                    orders.GetByKey(Convert.ToInt32(reader(0)))
                    OrderID = Convert.ToString(reader(1))
                    Dim Delivery As Documents = BusinessDelivery
                    Delivery.CardCode = orders.CardCode
                    Delivery.CardName = orders.CardName
                    Delivery.NumAtCard = orders.NumAtCard
                    'Delivery.DocNum = orders.DocNum
                    Delivery.HandWritten = BoYesNoEnum.tNO
                    Delivery.Series = 8
                    Delivery.DocDate = DateTime.Today
                    Delivery.DocDueDate = DateTime.Today
                    Delivery.TaxDate = DateTime.Today
                    Delivery.Address = orders.Address
                    Delivery.Address2 = orders.Address2
                    Delivery.Comments = "Based on Sales Order #" + orders.NumAtCard & "."
                    Delivery.DocCurrency = orders.DocCurrency
                    Delivery.DocDueDate = orders.DocDueDate
                    Delivery.DocObjectCode = SAPbobsCOM.BoObjectTypes.oDeliveryNotes
                    Delivery.ShipToCode = orders.ShipToCode
                    Dim lines As Document_Lines = orders.Lines
                    'If (count > 0) Then
                    '    lines.Add()
                    '    lines.SetCurrentLine((lines.Count - 1))
                    'End If
                    Dim oPickList As PickLists = DirectCast(vCompany.GetBusinessObject(BoObjectTypes.oPickLists), PickLists)
                    oPickList.GetByKey(orders.Lines.PickListIdNumber)
                    For i As Int32 = 0 To (lines.Count - 1)
                        If i > 0 Then
                            Delivery.Lines.Add()
                            Delivery.Lines.SetCurrentLine(i)
                        End If
                        ' Set the Current Lines on the order
                        orders.Lines.SetCurrentLine(i)
                        Try
                            oPickList.Lines.SetCurrentLine(i)
                            Delivery.Lines.BaseEntry = oPickList.Lines.OrderEntry
                            Delivery.Lines.BaseLine = oPickList.Lines.OrderRowID
                            Delivery.Lines.Quantity = oPickList.Lines.PickedQuantity
                            Delivery.Lines.BaseType = DirectCast(SAPbobsCOM.BoObjectTypes.oOrders, Integer)
                            Delivery.Lines.BinAllocations.BinAbsEntry = oPickList.Lines.BinAllocations.BinAbsEntry
                            Dim rs As SAPbobsCOM.Recordset = vCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
                            rs.DoQuery("select itemcode, price, dscription from RDR1 R where R.LineNum = " & oPickList.Lines.OrderRowID & " and R.PickIdNo = " & oPickList.Lines.AbsoluteEntry)
                            While (rs.EoF <> True)
                                Delivery.Lines.ItemCode = rs.Fields.Item(0).Value.ToString 'orders.Lines.ItemCode
                                Delivery.Lines.UnitPrice = CType(rs.Fields.Item(1).Value.ToString, Double) 'orders.Lines.UnitPrice
                                Delivery.Lines.ItemDescription = rs.Fields.Item(2).Value.ToString 'orders.Lines.ItemDescription
                                rs.MoveNext()
                            End While
                            rs = Nothing
                        Catch ex As Exception
                            Continue For
                            My.Computer.FileSystem.WriteAllText(_LogPath, ErrDetails.ToString, True)
                        End Try
                    Next
                    If Delivery.Add() <> 0 Then
                        ErrDetails.AppendLine(" Unable to create Delivery note for Order: " & OrderID & " <br /> " & vCompany.GetLastErrorCode() & ":" & vCompany.GetLastErrorDescription())
                    Else
                        ErrDetails.AppendLine("Successfully created Delivery note for Order:" & OrderID) ' & " as requested by " & UserEmail & ".")
                    End If
                    orders = Nothing
                    Delivery = Nothing
                    BusinessOrders = Nothing
                    BusinessDelivery = Nothing
                    My.Computer.FileSystem.WriteAllText(_LogPath, ErrDetails.ToString, True)
                End While
                'orders = Nothing
                'BusinessOrders = Nothing
            End Using
        Catch ex As Exception
            ErrDetails.AppendLine(" Error generating Delivery note for Order: " & OrderID & " <br /> " & ex.ToString())
            My.Computer.FileSystem.WriteAllText(_LogPath, ErrDetails.ToString, True)
        Finally
            If Not String.IsNullOrWhiteSpace(ErrDetails.ToString) Then
                My.Computer.FileSystem.WriteAllText(_LogPath, (ChrW(13) & ChrW(10) & ChrW(13) & ChrW(10) & "Errors encountered while registering data on " & System.DateTime.Now.ToString("F") & ".Errors:" & ChrW(13) & ChrW(10) & Me.ErrDetails.ToString), True)
            Else
                My.Computer.FileSystem.WriteAllText(_LogPath, (ChrW(13) & ChrW(10) & ChrW(13) & ChrW(10) & "Application Ran successfully on " & System.DateTime.Now.ToString("F") & "."), True)
            End If
        End Try
    End Sub
The Error message am getting is 1470000368 - The quantity allocated to bin locations must be positive.

Am getting this error now is
"1470000341 - Fully allocate item "1017494" to bin locations in warehouse "Isolo". Issue is we have items in multiple Bin locations and the items have been picked via the pick ticket. Is it also possible to generate the delivery note off the Pick List.
The new code am using is
    Public Sub Sales2Delivery() '(ByVal OrderID As String)
        Dim OrderID As String = ""
        Try
            Using connection As New SqlConnection(StaginConn)
                'Dim command As New SqlCommand("SELECT DocEntry from ORDR with (nolock) WHERE NumAtCard = '" & OrderID & "'", connection)
                Dim command As New SqlCommand("SET DATEFORMAT DMY; select distinct top 5 o.DocEntry, o.NumAtCard from ordr O with (nolock) join RDR1 R with (nolock) on R.DocEntry = O.DocEntry join OPKL P with (nolock) on P.AbsEntry = R.PickIdNo where u_shipstate = 'Delivered' and CAST(O.docdate as date) >= '30/04/2014' and P.Status = 'Y' and o.DocStatus = 'O';", connection)
                connection.Open()
                Dim reader As SqlDataReader = command.ExecuteReader()
                ' Call Read before accessing data.
                While reader.Read()
                    Dim BusinessOrders As Documents = DirectCast(vCompany.GetBusinessObject(BoObjectTypes.oOrders), Documents)
                    Dim BusinessDelivery As Documents = DirectCast(vCompany.GetBusinessObject(BoObjectTypes.oDeliveryNotes), Documents)
                    Dim orders As Documents = BusinessOrders
                    orders.GetByKey(Convert.ToInt32(reader(0)))
                    OrderID = Convert.ToString(reader(1))
                    Dim Delivery As Documents = BusinessDelivery
                    Delivery.CardCode = orders.CardCode
                    Delivery.CardName = orders.CardName
                    Delivery.NumAtCard = orders.NumAtCard
                    'Delivery.DocNum = orders.DocNum
                    Delivery.HandWritten = BoYesNoEnum.tNO
                    'Delivery.Series = 8
                    Delivery.DocDate = DateTime.Today
                    Delivery.DocDueDate = DateTime.Today
                    Delivery.TaxDate = DateTime.Today
                    Delivery.Address = orders.Address
                    Delivery.Address2 = orders.Address2
                    Delivery.Comments = "Based on Sales Order #" + orders.NumAtCard & "."
                    Delivery.DocCurrency = orders.DocCurrency
                    Delivery.DocDueDate = orders.DocDueDate
                    Delivery.DocObjectCode = SAPbobsCOM.BoObjectTypes.oDeliveryNotes
                    Delivery.ShipToCode = orders.ShipToCode
                    Dim lines As Document_Lines = orders.Lines
                    'If (count > 0) Then
                    '    lines.Add()
                    '    lines.SetCurrentLine((lines.Count - 1))
                    'End If
                    Dim oPickList As PickLists = DirectCast(vCompany.GetBusinessObject(BoObjectTypes.oPickLists), PickLists)
                    oPickList.GetByKey(orders.Lines.PickListIdNumber)
                    For i As Int32 = 0 To (lines.Count - 1)
                        If i > 0 Then
                            Delivery.Lines.Add()
                            Delivery.Lines.SetCurrentLine(i)
                        End If
                        ' Set the Current Lines on the order
                        orders.Lines.SetCurrentLine(i)
                        Try
                            oPickList.Lines.SetCurrentLine(i)
                            Delivery.Lines.BaseEntry = oPickList.Lines.OrderEntry
                            Delivery.Lines.BaseLine = oPickList.Lines.OrderRowID
                            Delivery.Lines.Quantity = oPickList.Lines.PickedQuantity
                            Delivery.Lines.BaseType = DirectCast(SAPbobsCOM.BoObjectTypes.oOrders, Integer)
                            'Dim rs As SAPbobsCOM.Recordset = vCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
                            'rs.DoQuery("select itemcode, price, dscription from RDR1 R where R.LineNum = " & oPickList.Lines.OrderRowID & " and R.PickIdNo = " & oPickList.Lines.AbsoluteEntry)
                            'While (rs.EoF <> True)
                            Delivery.Lines.ItemCode = orders.Lines.ItemCode
                            Delivery.Lines.UnitPrice = orders.Lines.UnitPrice
                            Delivery.Lines.ItemDescription = orders.Lines.ItemDescription
                            '            rs.MoveNext()
                            '            End While
                            'rs = Nothing
                        Catch ex As Exception
            Continue For
            My.Computer.FileSystem.WriteAllText(_LogPath, ErrDetails.ToString, True)
        End Try
                    Next
                    If Delivery.Add() <> 0 Then
                        ErrDetails.AppendLine(" Unable to create Delivery note for Order: " & OrderID & " <br /> " & vCompany.GetLastErrorCode() & ":" & vCompany.GetLastErrorDescription())
                    Else
                        ErrDetails.AppendLine("Successfully created Delivery note for Order:" & OrderID) ' & " as requested by " & UserEmail & ".")
                    End If
                    orders = Nothing
                    Delivery = Nothing
                    BusinessOrders = Nothing
                    BusinessDelivery = Nothing
                    My.Computer.FileSystem.WriteAllText(_LogPath, ErrDetails.ToString, True)
                End While
                'orders = Nothing
                'BusinessOrders = Nothing
            End Using
        Catch ex As Exception
            ErrDetails.AppendLine(" Error generating Delivery note for Order: " & OrderID & " <br /> " & ex.ToString())
            My.Computer.FileSystem.WriteAllText(_LogPath, ErrDetails.ToString, True)
        Finally
            If Not String.IsNullOrWhiteSpace(ErrDetails.ToString) Then
                My.Computer.FileSystem.WriteAllText(_LogPath, (ChrW(13) & ChrW(10) & ChrW(13) & ChrW(10) & "Errors encountered while registering data on " & System.DateTime.Now.ToString("F") & ".Errors:" & ChrW(13) & ChrW(10) & Me.ErrDetails.ToString), True)
            Else
                My.Computer.FileSystem.WriteAllText(_LogPath, (ChrW(13) & ChrW(10) & ChrW(13) & ChrW(10) & "Application Ran successfully on " & System.DateTime.Now.ToString("F") & "."), True)
            End If
        End Try
    End Sub

BW Hierarchies sometimes not showing as pick list

Hi,
we have created a Crystal Report that uses a parameter that should be picked from a BW hierarchy (a cost center group). We created the report and published it via the BW publisher to BO and then included it with an iView in the BW Portal.
Now when I log on to the portal and call the report, I'm presented with the static pick list (top 200 values) most of the time instead of the hierarchy view (as described in http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsandBWquery+elements in the lower part of the article)
When I then log on to the CMC and call the report there, I first get the flat list, too, but when I call the report 2 or 3 times, I get the hierarchy view. When I now go back to the BW Portal, I get thet hierarchy view there as well...
any idea what causes this issue? How can I influence which selection screen is being displayed? (particularly as I don't want everyone to have to log on to CMC first...)
Thanks...

Hi Duncan,
thank you for your reply. It's really sort of tricky.
After the pick list is up and ready once, It'll be shown fine from that point on until, I assume, my CMC login expires.
So maybe it's some permission problem?
I just tested the following:
<ul>
<li>log into portal, call report -> flat list
<li>log into CMC -> call report (does not have to be the same, just has to have a hierarchy pick list, a simple report does not do the trick) -> check that it has the hierarchy pick list
<li>go back to the portal, call the report again -> hierarchy pick list comes up ok
<li>log off from CMC
<li>go back to the portal, call the report again -> flat list again...
</ul>
the whole thing works the same when I replace CMC by InfoView. The strange thing is that I have to log in to Infoview the first time I call the report from the portal (even though we have SAP credentials in BO), but this does not seem to be sufficient. I have to call one of the reports in Infoview or CMC first to make it work from the portal.
Concerning the trace, I'll have to look into this together with our sysadmins, but I'll see what I can get.
Thanks again for your ideas,
cheers
MU

Crystal Parameter Hierarchy Pick List not showing in Infoview

Hello,
We are having an issue with crystal reports not showing the hierarchy pick list in infoview.
We have 3 environments, Dev, QA, Prod.
Business Objects environments consist of 3 separate servers
Dev
Windows Server 2003 64bit
BOXI 3.1 with Service Pack 2
Integration Kit 3.1 with SP2
Crystal Reports V1 SP2
QA
Windows Server 2003 64bit
BOXI 3.1 with Service Pack 2
Integration Kit 3.1 with SP2
Crystal Reports V1 SP2
Prod
Windows Server 2003 64bit
BOXI 3.1 with Service Pack 2
Integration Kit 3.1 with SP2
Crystal Reports V1 SP2
SAP BW Environments consist of 2 server landscapes, with DEV / QA sitting on 1 and production on its own.
ServerA
Dev and QA
ServerB
Prod
We create a crystal report in Dev BOBJ, and publish to DEV SAP BW system sitting on ServerA.
The picklist shows hierarchy properly in Dev Infoview.
We then LCM the report to QA BOBJ, and Do Not publish to QA SAP BW system sitting on ServerA.
We transport the role that the report was published to, from Dev SAP BW to QA SAP BW
The picklist shows hierarchy properly in QA Infoview.
We then LCM the report to PROD BOBJ, and Do Not publish to PROD SAP BW system sitting on ServerB.
We transport the role from QA SAP BW to Prod SAP BW
The picklist does NOT show hierarchy properly in Prod Infoview.
We are a bit confused on why the picklist works properly on QA Infoview without publishing, but will not work on Production Infoview.
Is it because the repository objects for the picklist contain some server paths? (Since DEV and QA sit on the same server "ServerA")
Do we need to publish in production SAP BW for the hierarchy pick list to function?
Any help would be appreciated,
Thanks!
Nick

Hi Nick,
Did you get this resolved? We are encountering the same issue. We have migrated our report from QA to Prod using BW Transport and then used BW Publisher to publish to BOE. The parameter list shows in InfoView for Dev and QA, but not Prod.
We're using BOE SP2 FP 2.8

Material staging indicator not populating in prod order WM pick list item

Hello,
I have an issue with material staging in an prod order
1) PP-WM interface is activated
2) Control cycle for material is created
3) Production storage location is created for material
4) storage type is 100 for production
5) There is one discontinued material and also the follow up material
6) stock of discontinued material is zero and requirement are passed to follow up material
When we confirm the order the stagging indicator for both follow up material as well as discontinued material automatically populates zero (Non relevence to pick list items) where as it should be one (1 - for pick list items).
One more issue user has manually inserted discontinued material as well as follow up material in production order change mode.
In the BOM of a main material both discontinued as well as follow up material is there with some quantity as a component.
For the same work center, control cycle , production storage location the indicator is populating.
These two material (discontinued as well as follow up) are appearing twice in the WM pick list screen where first two line items are OK and populating indicator "1". But in line item last and second last indicator is not there.
My question is why the stagging indicator is not automatically populating in the production order WM pick list screen in front of components.

Unfortunately, WM material staging via production orders is not possible
from the pull list. Please see the long text of message RMPU 311
(WM material staging for production order reservation not possible):
"You cannot carry out a WM material provision for pick parts from
production order reservations in the pull list". The reasons for this
are cleary explained in the SAP on-line documentation via the
following path :
Logistics -> Logistics Execution -> Warehouse Management Guide ->
Goods Issue -> Goods Issue for Production Supply ->
Material Staging for Repetitive Manufacturing
See the following under the Selection heading :
The choice of the selection type influences which types of WM material
staging are supported in the pull list. However, the pick parts can be
staged via RS headers/planned orders but not with the current BOM
explosion. The release order parts, on the other hand, can also be
staged if the current BOM is used for calculating the dependent
requirements.
WM material staging via production orders is not possible from the pull
list.
I think you may try in CO02 or COR2 for production order or process order.

Clarifications in pick list output type EK00

Hello ,
Have any one of you used the pick list output EK00 . I have
tried this and I do have some issues with
We are using SAP R/3 4.7 x 200 version .
Output type EK00 is not available in the application V2 (
Shipping ) . Its available in application V4 (Shipping special
case).
1. I have assigned the shipping points through T code VOK2 as I
am not able to find the output EK00 through customization menu.
2. I have maintained the printers details through VP01SHP ( correct me if I am wrong) . I am using the standard program RVADEK01 and form
SD_PICK_SINGLE in the output EK00.
After doing the above setting when I am creating delivery in
VL01N , the output type EK00 is not assigned automatically and
when I try to assign it manually , it gives an error message
"Processing program missing for output EK00 (medium 1)in
application V2" . I dont know why the system is looking for
application V2 when it is not available in V2 and only available
in V4 .
Am I missing anything in my process . Can some one help me in this .
With regards,
Joseph Anand.B

Dear Joseph,
Have you done the following setting in transaction v/38:
1.On the Display View "Output Types": Overview screen, in the Output type group box, select EK00. (Application V4)
2.In the left frame, under Dialog Structure, double-click on the Processing routines folder.
3.On the Change View "Processing Routines": Overview screen, choose .
4.In the first medium, for Print output, enter the Smart Form print program /SMB40/RVADEK01 under Program and Smart Form /SMB40/SDPIK_L under SmartForm.
Document Types        Picking List
Output Types          EK00
Transaction Code      v/38
Smart Form Program    /SMB40/RVADEK01
Smart Form            /SMB40/SDPIK_L
                      /SMB40/SDPIK_A
5. Save the changes.
Regards,
Naveen.

Printing problem for picking list

Hi friends,
Whenever we print the picking list of material with batch number. the printing job will bring a extra page with basic form information . it's kind of wasting the paper since the extra page doen not contain any specific picking informations. This issue only happen to picking list with batch number applied material . The extra page won't be printed out once the material is not subjected to batch management.The form style should be script form.
Please kindly advise if you have any suggestions.
Thanks,
LG

Hi,
Assuming printing job is batch job. Normally batch job executes a program (you assign program to the batch job when you configure it) while you create batch jobwhile it is running. If you want the system to check the particular information (take the information if the so and so prerequisits matches if not ignore kind of) during the program execution you can do it with the hlep of a deverloper.
If you want to avoid unnecessary basic ifnormation it can very well be done with the layout changes in SAP script form and the program if necessary. Make sure you dont need those information as some times it is like a legal information like we see in the company signatures which seems like basic information.

Pick list configuration

Hi friends
There is critical issue that i need to configure the picklist out put. Please explain me step by step configuration, assignment, out put type used,condition record and from where we have to generate the pick list out put? whether in delivery? here they have configured delivery out put as packing list out put and it is assigned to LF. PLEASE NOT THERE IS NO LEAN OR WEAR HOUSE MANAGEMENT.
Regards
KRN

HI nkr
TRy to print pick list using tcode VL10B.
Form name : LVSKOMMIL1
Print program : RLKOMM40
Configurations are done in tcode OMLV. Form is maintained under Print Code and print program under Multiple processing of OMLV.
VL10B is able to create delivery note in background
check the settings in NACE for this picking Output type, Print program and Script form Whether this output type is triggering the form or not?
You can also use the Smartform for picking
/SMB40/SDPIK_L
try with transaction OPK8
Reward if useful to u

*configure the Picking list(PL) output type,a smart form for PL.

Hello SIR,
I want to configure the Picking list(PL) output type,a smart form for PL but there should be an output type to print*.
i have assign the out type to shipping point in t.code ovlt .i have created picking list in t.code nact. i created sales order and delivery. i have check my picking list in ovl2n change mode picking out put is available in extra-picking output. i have checked my picking out put for smart form in systems-service-output control if i execute it show like no data to list. no spool request number has generated there.
so were i have to check picking list preview for smart form . is spool request number is necessary.plz help me to view preview of picking list.or plz say the steps to configure this to preview.
thanks,
agilarasan

Hi,
Go to Nace .The application for Goods Issues is
ME - Inventory Management -> select and click on output types ->select wa03 output type and click on processing routines here you can find the form name and the driver program name.So while printing select wa03 as the output type.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Regards,
Harini.S
Edited by: Alvaro Tejada Galindo on Dec 23, 2008 3:46 PM

MB26 pick list issue

Similar Messages

Maybe you are looking for