Material staging indicator not populating in prod order WM pick list item

Hello,
I have an issue with material staging in an prod order
1) PP-WM interface is activated
2) Control cycle for material is created
3) Production storage location is created for material
4) storage type is 100 for production
5) There is one discontinued material and also the follow up material
6) stock of discontinued material is zero and requirement are passed to follow up material
When we confirm the order the stagging indicator for both follow up material as well as discontinued material automatically populates zero (Non relevence to pick list items) where as it should be one (1 - for pick list items).
One more issue user has manually inserted discontinued material as well as follow up material in production order change mode.
In the BOM of a main material both discontinued as well as follow up material is there with some quantity as a component.
For the same work center, control cycle , production storage location the indicator is populating.
These two material (discontinued as well as follow up) are appearing twice in the WM pick list screen where first two line items are OK and populating indicator "1". But in line item last and second last indicator is not there.
My question is why the stagging indicator is not automatically populating in the production order WM pick list screen in front of components.

Unfortunately, WM material staging via production orders is not possible
from the pull list. Please see the long text of message RMPU 311
(WM material staging for production order reservation not possible):
"You cannot carry out a WM material provision for pick parts from
production order reservations in the pull list". The reasons for this
are cleary explained in the SAP on-line documentation via the
following path :
Logistics -> Logistics Execution -> Warehouse Management Guide ->
Goods Issue -> Goods Issue for Production Supply ->
Material Staging for Repetitive Manufacturing
See the following under the Selection heading :
The choice of the selection type influences which types of WM material
staging are supported in the pull list. However, the pick parts can be
staged via RS headers/planned orders but not with the current BOM
explosion. The release order parts, on the other hand, can also be
staged if the current BOM is used for calculating the dependent
requirements.
WM material staging via production orders is not possible from the pull
list.
I think you may try in CO02 or COR2 for production order or process order.

Similar Messages

Qty withdrawn is not updating in prod order.

Hi gurus,
Qty wihdrawn is not updating in prod order , when i issuing
raw material through tcode mb1a 261 movement type.
What could be the possible reasons.Pls suggest.
Thanks in adv.
Sudarshan

Dear
you are issuing the materials in MB1a w/o reference to the reservaton.
You need to do as below
In MB1a ---follow the menu path -Goos issue -->create w.referenec to order.
Enter the order number. execute the report
system will default matrerial no and qty/storage loc from order. Here you enter the qty requuired and post. This qty you posted in this way will refect/update the withdrawl qty in the production order.
You are not entering the order the way I suggested, hence it is going as a unplanned issue...hence the problem.
come back if required

Material number is not populating in PO in tcode ME23N

Hi,
The material number is not populating in PO in transaction ME23N. The coloumns is displaying as blank and supressed(Gray).
This problem occured during the upgradation from 4.6C to ECC6.0.
We have checked the SPRO configuration for field selections and these are not having any problem.
Data is updated in database tabes but it is not displayed in ME23N screen.
Please advice.
Thanks,
Rakesh

check OSS Note 492757 - ME21N/ME52N: You cannot set field selection for material
maybe it helps to solve your issue

Unit Cost is not Populating in Sales Order Line Level for OPM Enabled Org

Dear All,
This is to inform you that Unit Cost is not populating in Sales Order Lines. Ideally it should pick from OPM financials, but whenever i am running Cost Update it is throwing error. We need to pull out Unit Cost for Sales Analysis Report. Please suggest on the same ASAP. What are the steps needs be followed to populate the Unit Cost. Please suggest.
Thanks & Regards,
Patrick

Hi
I think it will pick from PRICE list. Why don't to you try by keeping this item in the mentioned Price list.
Regards
Raj

Sales Order and Pick List reports will not attach to Email message

My client wants to email both the Sales Order and Pick List that is created from the Sales Order in the same email message. It appears that SAP B1 will not do this. Is this a bug or just the way B1 works. My client is running version 8.8 PL 19. Thank you for your help.
Bill Turek

Hi Bill,
Pick List is associated with delivery, not sales order. If you need Pick List be emailed, you have to email delivery.
Thanks,
Gordon

Requestors end users will not acces a site directly and add list items

Hi
i created a site for IT services and this site includes some lists for various services
http://Intranet.com/Units/IT services
main site is http://Intranet.com
and also workflow are configured for these lists for create new item
and only 3 type of users will work on these lists
1)Requestors (Create,View rights)
2)Contributers (Contribute permissions)
3)Approvers
Scenario:
-- Requestors will create list items and approvers will Open this list item and edit list item like
approve and add a Contribute userid in AssignedTO field
---Contribute user also will recieve email and he also Open item and edit ans save this list
so basically its backend , data inserted by requestors will save in lists
so here i need all Requestors end users will not acces IT services site and add list item directly in list.
is any other option availabe that i will provide a diffrent front end page for Requestors at root level site (which is Intranet.com )
and they will add and view only their data, and Contributers also view and edit all users data.
adil

Hi adilahmed,
You can use two web parts to show the list items for different group.
In the List view page, add another list view web part, set the first web part list view to filter Created By field with Me, second list with all list items.
Then set the first web part with audience Requested group, and second web part with audience Contributers group.
Thanks,
Qiao Wei
TechNet Community Support

Plant not populating in internal order

Hi All,
When we release a serivce order in CRM-Service, system is creating internal order. But it is not populating plant field in internal order. We have done the customizing of linking service organization to plant in CRM. Could you please let me know if there are some other configurations/enhancements to be done to derive plant field for internal order in ECC?
Regards
Suresh

If plant is maintained in Customer-Material Info Master & Customer Master, it will be defaulted in Sales Order.
But incase of Plant being maintained in Material Master, it is a common practice that it requires to be maintained in Sales Otder. If before entering the Material, Plant is maintained at Header level in sales Order, it will default in Line items, else it is required to be maintained for all Line Item.
This is Stansdard SAP.
Regards,
Rajesh Banka
Reward points if helpful.

Requirement Type not populated in Sale Order

Hi,
In our sales order a requirment type 041 is not getting populated into the sales order for one particular item category.
Regards,
Jagan

Requirement type determination in standard SAP is performed using a six-level hierarchical
sequence:
1. First, SAP tries to determine the requirement type using the strategy group from
the material master record.
2. If the strategy group is not maintained, SAP determines the requirement type
using the MRP group from the material master record.
3. If this is not maintained either, the SAP system determines the requirement type
using the material type from the material master record.
4. If this also fails, the SAP system determines the requirement type using a combination
of the item category and MRP type.
5. If this rule is not maintained, the SAP system at last tries to determine the
requirement type using the item category itself.
6. If no requirement type is found at this level, the system treats the transaction
as not relevant for the transfer of requirements or availability check.
Regards
Deb

Material staging indicator

hi friends,
i just want to know if the material staging indictor for production supply field was left blank,what will the system do to the material posting any movement.thanks and God Bless You!

Hey, Allan
If you are working with WM you should check the following:
- the workcenter in the routing or recipe has a Supply Area defined at header. (CR02)
- component should have WM view defined in material master (MM03 or MM01)
- Component has a control cycle: LPK1 or LPK2, where you state the storage type, supply area and indicator.
- According to the Issue SLoc in MRPViews (MM02) components can be supplied from MM or WM. If they are coming from MM, they are not going to arise in Picklist.
Let me know how is your actual situation.
Dario

Sales order Schedule line not showing in prod. order

Hi
I am using Make-to-order production. In my production order i can able to see the sales order number, item number but not able to see the schedule line number. It is showing zero. But in table VBEP table when i checked, system gives the sales order number (eg.1511632), item number (10) and schedule line number (0001).
Why in production order screen and AFPO table i am not getting schedule line number(field name-KDEIN).
Regards
Ganesh M

Hi,
When an item has more than one schedule line, the system automatically assigns a unique number to each line. The number is displayed in the details screens for schedule lines. The schedule line number serves internal purposes and does not, for
example, determine the sequence of schedule lines in the overview screen. The schedule lines on the overview screen are sorted by date.
Please go to Sale order view from MD04, Click on Item no. and go to schedule line tab page, now you can see the line items and if you want to see in detail click each line item, it will show line item number clearly.
Regards,
Santhamoorthy

WM BIN to BIN transfer order and picking list

Hi Guys
I have a scenario where I need to print BIN to BIN transfers details
After completing the transfer to destination BIN Ineed to print
Which Interim storage type(Like 9 sereis 901----999) I need to link print code and printer
what config settings required for this
and also another similar scenario
Picking list from warehouse against the sales order
which interim storage type we need to link the printer
we have already satnadalone storage types availble(100,120,1....)
Kindly suggest a solution ,thanks in advance

Dear Friend,
Print determination is WM is done in transaction OMLV. Major steps include
1. Define spool request.--> Here you define spools and how it should be configured like new spool request, delete after spool out put.
2.Definition of Print code--> Here you assign form to each print code
3. Assign Print code to movement type--> For each mvt type assign print code. In automatic determination of printer, system checks whether any print code is assigned to each mvt type in a warehouse.
4.Assign Printer to Warehouse--> Once form and other information is determined in above steps, system checks for printer for a warehouse in this configuration.If no printer is assigned, then it will proceed to next step that is step 5 here below
5.Assign printer to picking area--> Assignment of printer to picking area.If this paramter is not maintained then it will go to next step. That is step 6 here
6.Assign printer to Storage type--> It will fetch printer if nothing is mentioned in step 4 & 5 above.
7.Print Report--> Assign print program to ware house. This the last step in config.
I hope this helps.

Order Records by List Item description

Can someone please give me some tips on how to solve the following issue?
I have a List Item that is populated using the following record group query:
SELECT DOC_TYPE_DESC, TO_CHAR(DOC_TYPE_INFO_ID) FROM DOC_TYPE_INFO WHERE ACTIVE = 'Y' ORDER BY DOC_TYPE_DESC
The DOC_TYPE_INFO_ID is stored with the actual record (foreign key relationship) but the user will see the description values in order to make a selection.
I'd like to give the user the option of ordering the records by this description value.

the function has to be on the database to be used in sql.
the sql sent by forms to the database when it queries the block has to be something like this
select ...
from documents
where...
order by my_database_function(doc_type_info_id)
the function returns the doc_type_desc from the doc_type_info table for the specified doc_type_info_id.
put "my_database_function(doc_type_info_id)" in the block's order by property.
there might be a more efficient method. try this out:
select * from documents
order by (select doc_type_desc from doc_type_info where doc_type_info_id = documents.doc_type_info_id)
if that works, put the bold bit in the order by property instead of using the function.

Sales Order in Pick List

Hi all
How to display the Sales Order Document Number in Pick List to show in a Pick List User Defined Title field?
Kedalene

Hi Kedalene,
If i understand u correctly then Sales Order no is already in Pick List form.
If that Column is not visible then activate from Form Setting of Pic List. Column Name is Doc No which will show Sales Order no of Pick List.
If i am not understanding then Please explain more.
Thanks
Regards::::
Atul Chakraborty

Unlimited Indicator not copying to Purchase Order

Hello experts,
I'm running ECC 6.0 and am unable to solve this. I have subcontracting info-records for materials that specify a material to a vendor, pricing, tolerances, etc.
In the Purch. Org 1 screen of info-record view, I can see the tolerances are maintained (5% under and unlimited over-delivery for example). The 5% under is copying when a purchase order is created for the material in question, but the unlimited over-delivery indicator is not copying. If I clear out the indicator and maintain an actual over-delivery tolerance, it copies just fine. Only the indicator is failing to copy from the info-record.
Any familiarity with how to solve this issue?
Kind Regards,
Kelby

Hello Kelby,
Even if nothing is maintained in the material master plant(purchasing view) the unlimited tick should default from the PIR. PIR always has a higher priority than master as it is specific to material+vendor. The help for the 'unlimited' tick in the PIR mentions this.
You can have a look at this note. It is very old and probably not valid for your release. However this is the only note I could find. You should probably raise an OSS message.
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361…

Final Issue Indicator not set in maitnenance order after ECC 6.0 upgrade

Hi,
We encounter this problem after upgrading to ECC6.0 from SAP R/3 4.6C
Final issue indicator (RESBD-KZEAR) is not being set in maintenance order (IW33) for sub-component non-stock items in General Data page
Would be great if anyone could guide in this regard
Detailed Scenario:
1) Maintenance Order is created (IW31) is created in plant A
2) For non-stock items, reservation created by maintenance order creates a purchase requisition
3) Account Assigned STO (against maintenance order) is created from purchase requisition
4) Transfer Posting done from Plant B (351 movement) for complete qty
5) GR at Plant A done (101 movement) for complete qty.
6) Final Issue Indicator is not set in General Data page eventhough the complete quantity is delivered.
Thanks
Edited by: muthukumarv on Apr 2, 2010 8:59 PM
Edited by: muthukumarv on Apr 2, 2010 9:00 PM
Edited by: muthukumarv on Apr 2, 2010 9:03 PM

Hi,
Please check in the STO if the "Delivery completed" indicator is checked or not?
If Yes, then search some correction notes of SAP and get it implemented or raise OSS message with SAP to get the Final Issue indicator to be set in maintenance order.
If No, then ask your MM consultants to investigate that. They can check the config of "Goods Receipt" Or check if the total quantity GR has been done Or some Under delivery/ Over delivery tolerance has been maintained.
Thanx.
Nilmoni.

Material staging indicator not populating in prod order WM pick list item

Similar Messages

Maybe you are looking for