MB5B showing diff data for diff users

Dear All,
At my client side in standard report MB5B for one user data for particular material is coming while for another user
it is showing no data.
I have checked authorization object in SU53 but it is having no problem.
Roles,parameters and profiles are correct in both.
Also i have checked all materials in MB5B for both users and found the materials which are having nil stock in current
date are not showing data for that user while for other user it is showing data.
What could be the reason and what changes are required in user profiles??
Thanks,
Naren

Thanks Ajit....in category it was not tick..
Naren

Similar Messages

How to show specific data for user on redirected page once they logged in

I and fairly new, but have a general understanding of Dreamweaver. Using CS3 or CS4, how do you get the redirected page after the user logges in to show only the data for that user? I have creater the login page and it works fine but i dont know what needs to be on the redirected page for it to show only the data for the user that just logged in.
I am not very good with the coding part so if it requires it any help with that would also be helpful.
thank all.

I should be able to get the understanding if explained.
As for scripting i believe its PHP. at lease thats the page i created the login page with.
As for user-specific information: basiclly there account information.
As for database i have dreamweaver linked to a MySQL database. it pulls from 2) tables
1st table has the following: ID - User Names - Password - account number
2nd table has the following: ID - account number - names - address - ect
So basiclly i want when a user loges in for it to redirect them to a page which then only shows the data for that users. if i can link the data the pulls up by the account number that would be ideal
Thank you Murry

SEM-BPS how to load additional data for special users at runtime?

Let´s assume you have a transactional info cube which contains SD Data from the source system.
If you want to show additional data, let´s say the attributes of the sold materials which can be read in the table MARA of the source system (provided you use R/3, etc.)
and you only want to show this data for a small amount of users, which need to see it, then i wonder how to do this.
am i right, that i can use the exit functions to init key figures, i.e. i could write some code which connects to the source system over RFC, downloads the data at runtime and presents it at the users excel sheet????
moreover, is it necessary to extend the existing cube, just to achieve this aim?
Message was edited by: Gideon Lenz

Hello Gideon,
there's no need to program anything. You can display any attribute in planning layouts. In your case you would extract the master data from material from SAP R/3 (MARA) into BW. The setup the layout to show the required attribute(s) in the layout in BPS.
If the attribute is relevant only for a specific user group, just give them access to this "special" layout (create a planning folder or web interface for this group).
Regards
Marc
SAP NetWeaver RIG

LastDataRefresh(ROLLUPTIME)-does not show correct date for multiprovider

Hi,
The Last data refresh (Rolluptime) shows incorrect date for multiprovider and we use lot of multiproviders.
Removing the last data refresh from the "Information" button of the Bex Web Analyzer which is using the "Information field web item", shows an empty space and a colon ":" and an empty box.
Please let me know if there is any other way to remove the last data fresh without showing the empty space.
We are on SPS 7 and FEP 7. Is this problem still exist in SPS 8/FEP 8?
Thankyou,
-Sini
Message was edited by: Sini Kumar

Depends on your definition of correct. Your initial question was that this time does not display. This time should display. For a multprovider, it uses this formula
first(last(<All InfoProviders under Multi - ROLLUPTIME>))
It uses the earliest rollup time from the last rolluptime of all the base providers.

How to set the filter on a report to show the data for the Current Month

Hi all,
I am working on a report, which currently has this filter: Date First Worked is greater than or equal to 10/01/2010. This reports show the data for the current month, so at the beginning of each month we have to remember to change the date on the filter.
Does anyone know what the criteria should say, so that it automatically changes and shows the information for the current month, without us having to go in and change anything?
Any help would be greatly appreciated!
Thanks,
AA

You need to add a session variable to date fir worked assuming that this is a date field.
To do this open up the filter on the field then at then press add Variable then "session" and enter the following CURRENT_MONTH into the Server Variable section.

Is there any object in labview that contains a list of data for the user to select (selection one at a time) or add a new data?

Is there any object in labview that contains a list of data for the user to select (selection one at a time) or add a new data?

List and table controls -> listbox..is that what you are thinking of?
The listbox presents the user with a list of options, and you can set it to only accept one selection at a time...Adding new data to the list can not be done directly by the user but if you make e.g. a text control and a button you can programatically insert new objects described in the text box when the button is pressed...(see example).
If you need more than one column you have the multicolumn listbox. If you want the users to write new entries directly yu can use a table and read selected cells using it's selection start property to read what cell has been selected.
MTO
Attachments:
Listbox_example.vi ‏34 KB

Time Series Graph Show Inappropriate Data for Continuous Analysis

Hi All,
I have marked Month as the Chronological Key in my BMM Layer but still I am unable to view the data correctly in my Time Series graph because it shows Inappropriate Data for Continuous Analysis at the time of creating the Graph. Can anybody help me out with the same.
Thanks

What data type is your key? The chronological key is required for the time series formulas (ago etc.).
The time series chart requires a date or datetime data type to work - perhaps a new column with the first of the month/period would help? Regards,
Robret

Save persistents data for all users

Hi
The persistent datas are save for one specified user, the user logged in into the system (e.g. Windows).
Is it possible to save persistent data for ALL users?
If yes how?
Thanks
Hans

Hi Hans
IMO it might be a bit tricky. As you know - Persistence objects are stored in databases. I presume you're not asking about document database. Second database is stored in SavedData file which is located in per user data directory. I.E. on mac in ~/Library/Caches/Adobe Indesign/Version 6.0/en_US/Indesign SavedData
Probably you need to create your own implementation of persistence or take a look on relations between file system and IDataBase interface.
Regards
Bartek

DW: Diff tools for Windows Users?

Hi,
I was making some changes to a few pages and saw the option to compare files. Then it said I needed a third-party diff tool in order to use this function. I went to preferences and saw where I could add this and started looking through the help files. It says to google diff or file comparison tools. I have been searching for an hour now and I only managed to find 3 programs for MAC users. Some of the sites I found said you need a third-party program/tool...same as Adobe's help info...a lot o help that is LOL. And a lot of this stuff is from 2003 and 2005...I am sure there are people in 2011 using these things?!
Are there some you know of that work on the Windows systems? I have Windows XP Pro 32-bit at this time.
Thanks for anyone's help.

I was looking this up with several different terms/orders and it was not giving me appropriate results. And yes, sometimes I swear these search engines are broken.
#1 I am a firm believer in, "If you don't know, look it up!" And that includes my old dictionary sitting right here next to me on my bookshelf.
#2 I will look high and low for answers and for whatever reason, a specific word combination made the entire difference between searches. I find this amusing,
    because sometimes one can type in the exact word search and still come up with other bologna.
#3 I am brand new to Adobe and from day 1 I had issues with known bugs, so after 2-3 months I am out of the gates and running and trying to learn
    as much as I can about this stuff before this fall. I am working on learning PHP, MySQL, and Apache before my fall classes and rather than just
    give up with something I came here, where Adobe assures me I can get answers on all my questions because everyone is so "friendly and helpful"?!
#4 As you can see, I have not flooded these forums with all my "stupid" questions...but I could certainly change that.
I hate asking others for help, and that first line of yours, including that quaint little video, is the very reason! [Personal comments deleted by moderator]
Well aside from your [deleted] tone, I went ahead and gave you a vote for your answer.
Thank you [deleted by moderator]

Hide/show a column for some users in SSAS tabular

Hi,
I have a requirement to show one of the columns in a table only to some of the users. I know SSAS tabular only supports row level security. The only solution I came up with yet is to create two different models. Unfortunately this wastes a lot
of expensive RAM in the server. Is there a better way? Some kind of work-around? ;)
Best Regards
Ulf

One other way is to embed the security level into the table. You can do this by adding a "security_ID" into your structure and join it with a security table and join this to a security table which has a junction of Tablecolumns/User or TableColumns/UserGroups.
The next step is to use a Case When in your sql query and make a decision to show null or real data for any column.
Business Intelligence Architect

IPad shows "No Data" for Videos when I have movies stored.

Short version:
I've had lots of issues with downloading movies to my iPad from iTunes. When it works, the "videos" section under Settings > General > Usage shows "No data" as if it's not reading the storage. I'll have 6 movies but it shows nothing stored on the iPad.
Detailed version:
I'm on my 3rd or 4th try of "Erase all settings and content" without using an iCloud back up. My 3rd gen iPad will work fine for a month or more after that then start having tons of problems with downloading movies and performace. I'll set a movie to download from iTunes, go do something else and my iPad will become so slow its unusable. The downloads will fail but not alert me, they just restart and loop repeatedly. As of now it's working fine but my third party warranty is running out and I need to decide if somethings really wrong with it or is this an issue with iOS 7. I've taken it to the genius bar, the guy suggested I plug it into iTunes, download a fresh OS and start over again. Since then, its been largely fine. Only one movie failed and tried again then worked. The performance has been fine but I've been burned by this before...its fine for a while then goes to complete crap. I've also had the WIFI showing as connected but will not recieve any data until I simply restart and its fine. This has happened every time I've reset so its not isolated to one glitchy install.
I've asked for help before but no one has ever replied, if someone can give me a suggestion whether to tough it out or make a claim and pay $50 for a refurbished iPad that would be very helpful. If you need more details just ask, I've done all I can think of.

Bump - Can someone please help?

Search Item drop-down does not show any data for Advanced Search.

Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, Suresh

Hi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu

Regd : How to find Validity date for a user in central user system

Hi Experts;
I want to get the list of users with profile SAP_ALL with following details like validity ,user type ,user name ,user id..
I can get through SUIM for each individual systems.Its very difficult to login to each system ,generate the report.So I prefered to go for Central system
But if I use central user system I have no option to find validity and user type for the system ( SUIM - > Cross system application )
I have also tried to the table USRO2 ( which gives only the list of users in the central system )
So is there any possible ways to find the Users with profile SAP _ALL with validity date in the central user system. So that I can easily generate it as one report instead of logging to each and every system
Regards
Sanjeev.S

Hi Ruchit
Thanks for your reply. I want to find the validity date of all users having SAP_ALL
profile of all child system connected through central user system .So it is possible
to do that in Centrals System by executing the report?
If I execute that report in Central user system will it give the details of all child
system connected to central system
I think it will give only the result of Central system and not the child system connected to Central system.Please clarify me.
I can execute the report by logging to each child system ,but it takes very long hours for me since there are many system in my landscape.
Awaiting for your reply.'
Thanks
Sanjeev.S

Configure "Always hide forms document message bar" and "Do not show edit warnings" for all users?

We need to do a mass deployment of Adobe Reader XI 11.0.3 with "Always hide forms document message bar" preference setting automatically set for every user so they do not have to go through the menu and set it manually.
Is there a way to configure this for all users with the customization wizard or another method?
We also need to do the same for "Do not show edit warnings"
If these are registry keys, which registry keys set these options?

Try http://www.adobe.com/devnet-docs/acrobatetk/tools/PrefRef/Windows/DocumentStatus.html?zoom _highlight=message#idkeyname_1_5647.
If that doesn't work and there's a configuration item in the preferences UI, do this:
Get regshot.
Close everything but Acrobat/Reader.
Take a reg shot.
Configure the setting via the UI.
Tak another reg shot.
Compare the two.
That process will give you your answer.
If there is no corresponding pref in the UI, then you probably can't do it.
Ben

Layout shows different data depending on user-language (German or English)

Hello best of the best,
we are using layouts to enter data into BCS. In one of our layouts different numbers are shown depending on the user-language (German or English).
This is despite the same layout is used.
Have you got any idea what could cause this problem?
Is there a setting somewhere that I didn´t know up to now (to distinguish in different languages)?
Better to ask SAP using an OSS-message?
Many thanks in advance,
Thomas
If you need more information about that case, pls tell me.

The numbers are volumes (KWh, to, l).
There are several positions with different "Breatdown Categories". In the english version of the layout only the KWh-volumes are shown. "to" and "l" (Diesel) are missing.
To describe the problem more clearly, in the german version the layout seems to show correct data:
Position                KWh         to         l
Diesel (l)                   -            -       5.000
Coal (to)                    -        3.000      -
Electricity (KWh)   200.000      -         -
The "-" shows fields that are grey --> no data can be inserted
The english version looks like this:
Position                KWh         to         l
Diesel (l)                   -             -          -
Coal (to)                    -            -           -
Electricity (KWh)   200.000 200.000 200.000
Here the white fields at Diesel (l) and coal (t) are empty, but the grey fields in the col´s "to" and "l" show the value of "KWh" in electricity as well.
Does this answer your question?
br,
Thomas

MB5B showing diff data for diff users

Similar Messages

Maybe you are looking for