MCBE report-drilldown variance in values

Hi All,
When i am running report MCBG, I enter plant value as SP* and the MRP controller say; MR2, and i get "Valuated stock value". The problem is when i run the same report with values SP* and M*, and check the values for MRP controller MR2, the "Valuated Stock Value" shows different value. Not sure how this happens. I am using SAP 4.6. Please let me know how this difference comes. Thanks.
Regards
'Alex

you may be having some MRP controller in the chosen plants who start with M but not MR2. drill down using MRP controller and you can get the data for other MRP controller

Similar Messages

Variance analysis report doesnt have any values

Hi Gurus,
For following reports I am not getting any values .Is I am missing any configuration.My client needs to be resolved on top priority.
S_ALR_87013139 - Target/Actual/Production Varainace - Cumulative
S_ALR_87013140 - Target/Actual/Production Varainace - Periodic
S_ALR_87013142 - Target/Actual Comparison - Cumulative
S_ALR_87013143 - Target/Actual Comparison - Periodic
S_ALR_87013145 - Plan/Actual Comparison - Cumulative
S_ALR_87013146 - Plan/Actual Comparison - Periodic
S_ALR_87013148- Variance Catergories Cumulative
S_ALR_87013149- Variance Catergories Periodic
Regards,
Nitin Amritkar

These reports run on summarized values. Please run KKRV for summarization by plant for the given periods.

How to get parameter value from report in event of value-request?

Hi everyone,
The customer want to use particular F4 help on report, but some input value before press enter key are not used in event of "at selection-screen on value-request for xxx", How to get parameter value in this event?
many thanks!
Jack

You probably want to look at function module DYNP_VALUES_READ to allow you to read the values of the other screen fields during the F4 event... below is a simple demo of this - when you press F4 the value from the p_field is read and returned in the p_desc field.
Jonathan
report zlocal_jc_sdn_f4_value_read.
parameters:
p_field(10)           type c obligatory, "field with F4
p_desc(40)            type c lower case.
at selection-screen output.
perform lock_p_desc_field.
at selection-screen on value-request for p_field.
perform f4_field.
*&      Form f4_field
form f4_field.
*" Quick demo custom pick list...
data:
    l_desc             like p_desc,
    l_dyname           like d020s-prog,
    l_dynumb           like d020s-dnum,
    ls_dynpfields      like dynpread,
    lt_dynpfields      like dynpread occurs 10.
l_dynumb = sy-dynnr.
l_dyname = sy-repid.
*" Read screen value of P_FIELD
ls_dynpfields-fieldname = 'P_FIELD'.
append ls_dynpfields to lt_dynpfields.
call function 'DYNP_VALUES_READ'
    exporting
      dyname     = l_dyname
      dynumb     = l_dynumb
    tables
      dynpfields = lt_dynpfields
    exceptions
      others     = 1.
check sy-subrc is initial.
*" See what user typed in P_FIELD:
read table lt_dynpfields into ls_dynpfields
    with key fieldname = 'P_FIELD'.
*" normally you would then build your own search list
*" based on value of P_FIELD and call F4IF_INT_TABLE_VALUE_REQUEST
*" but this is just a demo of writing back to the screen...
*" so just put the value from p_field into P_DESC plus some text...
concatenate 'This is a description for' ls_dynpfields-fieldvalue
    into l_desc separated by space.
*" Pop a variable value back into screen
clear: ls_dynpfields.
ls_dynpfields-fieldname = 'P_DESC'.
ls_dynpfields-fieldvalue = l_desc.
append ls_dynpfields to lt_dynpfields.
call function 'DYNP_VALUES_UPDATE'
    exporting
      dyname     = l_dyname
      dynumb     = l_dynumb
    tables
      dynpfields = lt_dynpfields
    exceptions
      others     = 0.
endform.                                                    "f4_field
*&      Form lock_p_desc_field
form lock_p_desc_field.
*" Make P_DESC into a display field
loop at screen.
    if screen-name = 'P_DESC'.
      screen-input = '0'.
      modify screen.
      exit.
    endif.
endloop.
endform.                    "lock_p_desc_field

Report for total IR value total GR value and Total P.O value

Is there is any report to get IR value GR value and P.O value as well............?
i don't need balance i want completed P.O and GR IR value with quantity.......
Please help me to get this kind of report in SAP
Thanks
Neha

Hi,
You can find change view option in ME80FN by executing the report and its available near by print and change layout button.
Click on the change view > select purchase order history.
You will get the required report then.
Also you can make the Z enhancement with the help of abapor.
Thanks & Regards,
Sandesh Sawant

Daily Production Report with Variance or receipt of Production

Hi All..
my one of the clients want the Daily Production Report with Variance or receipt of Product?
Please let me know what does it mean and how can I fetch this report
Thanks
Rahul

Hi Rahul,
Try This
Daily Receipt From Production report
SELECT T1.[BaseRef] as 'Production Order No', T0.[DocNum] as 'Receipt No', T0.[DocDate] as 'Receipt Date', T0.[CardCode] as'Customer/Vendore Code', T0.[CardName], T2.[ItemCode], T2.[ItemName], T1.[Quantity] as 'Receipt Qty', T1.[OpenQty] as 'Open Qty against Pro Order' FROM OIGN T0 INNER JOIN IGN1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T1.ItemCode = T2.ItemCode WHERE T0.[DocDate] >=[%0] and T0.[DocDate] <=[%1] and
T1.[BaseRef] IS NOT NULL
Summary Report For Production Order
SELECT T0.[DocNum] as 'Production Order No', T0.[PostDate], T0.[DueDate], T0.[RlsDate], T0.[CloseDate], T2.[ItemCode], T2.[ItemName], T3.[CardCode], T3.[CardName], T0.[PlannedQty], T0.[CmpltQty], T0.[RjctQty] , (T0.[PlannedQty]-T0.[CmpltQty]-T0.[RjctQty] ) as 'Open Qty' FROM OWOR T0 INNER JOIN WOR1 T1 ON T0.DocEntry = T1.DocEntry LEFT OUTER JOIN OITM T2 ON T1.ItemCode = T2.ItemCode LEFT OUTER JOIN OCRD T3 ON T0.CardCode = T3.CardCode WHERE T0.[PostDate] >=[%0] and T0.[PostDate] <=[%1]
Thanks,
Srujal Patel

How can I run the report for different input values at the same time?

Reports version: Report Builder 6.0.8.13.1
Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
How can I run the report at the same time for all the input values and save the time?
Thanks in advance.
Kishore.

Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
and then atleast 4 or 6 reports will run simultaneously.
For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
Thanks
Subodh

Refreshing sql report region based on values from another region - 4.0

Greetings All,
I have a page with two regions, say region 1 and region 2. I have a before header process that fetches values from db based on criteria entered from another page. Region 2 is a sql report region with bind variables from region 1. When this page is rendered region 1 renders properly however sql report region always returns no records. What am i missing here?
I would like to have the region 2 render a report based on the values from region 1. Region 2 has a sql query that looks something like
select
colum 1,
column 2,
column 3
from table t1
where t1.c1 = :p10_item1
and t1.c2 = :p10_item2Using apex 4.0
thanks
Seetharaman

If these items hidden, try making them display only .
Also what happens when you move the items from region 1 to region 2.
From my experience items do not have much of a dependency on the region they are attached to other than cases when the region is not rendered(when its condition fails) and then the item values become null(bcoz they themselves are not rendered).

FSG report not printing column values on same line but sequentially

FSG report problem:
We have defined 2 FSG reports 'Balance Sheet - Total' and 'Balance Sheet - Detail'. Both reports have 3 column values, namely the value in Euro (our Functional Currency), the value in MUR - Mauritian rupees (our reporting currency) and the rate of exchange.
The report 'Balance Sheet - Total' displays these values for assets e.g.:-
EURO MUR Rate of exchange
Non-current assets
1. Intangible assets ? ? ?
2. Other investments ? ? ?
(note: ? represents a certain value)
The report 'Balance Sheet - Detail' displays values as follows :-
Account EURO MUR Rate of exchange
1. Property & Equipment
A10101 Building Cost ? 0.00 0.0000
A20105 Motor Veh Accum Dep ? 0.00 0.0000
TOTAL ? 0.00 0.0000
A10101 Building Cost 0.00 ? n/m
A20105 Motor Veh Accum Dep 0.00 ? n/m
(note: ? represents a certain value)
What we don't understand s why the 'Balance Sheet - Detail' report repeats the display of column values in MUR FOLLOWING the display in EURO, instead of displaying column values for EURO and MUR on the same line, just like in the case for 'Balance Sheet - Total'.
Is there anything in the definition of column set, row set or report set should I change?
Can anybody help. Thanks.
null

The problem is related to defining the column set properly. It is OK with the first report and needs modification for the second. Formatting is also important so that they appear in the same line(row). The columns need to be linked to the fileds and assignment to set of books is also important as mentioned by Rajsekhar

Standard Report to check consumption values for multiple materials

Hi,
Is there any standard report to check "consumption" values for multiple materials? The user needs to check the consumption values over a period of time for multiple materials (VERP, ROH) before deciding the re-order and safety stock values for them. Any help on this will be greatly appreciated.
Thanks,
Swapnil

Dear Swapnil,
Report MCRE is widely used for the material cosnumption than checking in COOIS.
Also these reports can help you.
MCPF                 Material analysis: Dates
MCPO                 Material analysis: Quantities
MCPW                 Material analysis: Lead time
Regards
Mangalraj.S

BO Webi report hierarchy with measure values showing more(almost double value) compare to BW Bex report

Hi,
In our BO Webi report hierarchy with measure values showing more(almost double value) compare to BW Bex report. Can any one please help on this.
Is it BW problem or BO problem?
I checked in some other threads but it's not given solution.
Thanks,
Manjunatha

Hi,
Is it BW problem or BO problem? : BO
is it causing problem with hierarchly data only ? without hierarchies data is matching or not?
Post same in SAP BusinessObjects Web Intelligence .
Thanks.

In Report formula, IF no values then It is showing "0" (Zero)

Hi,
I have created a formula in Report. If the values are there then it is showing correct value. If no values for eg: blank + blank = 0, I want blank is required "SPACE" or " #" not the ZERO in the report .
Regards,
Satish
Edited by: Satish Dora on Sep 9, 2010 8:05 PM

Hi,
I am not sure whether "display zero as" and "display blank as" is the same thing.
I thought "display zero as" only controls the zero values and doesn't control the blank.
Actually I think the author wants to distinguish zero and blank.
If display both zero and blank as blank, I am not sure whether it's what he wants.
Now that I check it in my system, it seems that blanks are still shown as blank though "Does not exist" setting is something else.
This "Does not exist" seems to still be different than blank.
Blank means there is no record in Infoprovider for certain restriction in my sample.
What is the blank in your case, Satish?
Regards,
Patricia

Need to supress main report based on shared value comes from subreport

Hi,
I have a database that is used in both main report and subreport. On main report I have column a,b ,c, d,e,f to display in detail section, the subreport (column c, g,h etc) is also displayed on detail section, the link between main report and subreport is column a,b and a formula based on the value of c. So the link is within one database, some records link with other records and display both matching records on one line(especially column c shows one value in main report and another value in subreport). That's why I need subreport and I can display the report correctly.
Here is my question: if one record in main report couldn't find a match in subreport (subreport is blank), then I would like to show this record; if one record in main report does find a match in subreport, I don't want it to show(need to be supressed). I can define a shared variable to flag whether the subreport is blank or not, but this shared variable has to be placed under the section of subreport in main report and I don't know how to supress the upper detail section with subreport in it.
Any help would be appreciated!
Helen

Hi
In this case you need to insert the same sub report twise.
Example :
Detail a--Insert the sub report and go in sub report suppress all sections and using shared variables bring the value to main report.
Detail b -- based on detail a sub report suppress the main report records
Detail c-- Your actual sub report will display the values.
Note : use the same links for your detail 'a' sub report which you are using for detail 'c' sub report.
Thanks,
Sastry

Report with goods receipt value and invoice posting value

Is there any standard report with goods receipt value and invoice value (the value with which invoice is posted.

Hi
Please check MC$4 transaction, mey be helpful.
regards
Srinivas

How to hide edit link for some rows in report? (according to value of col)

Helo,
How to hide edit link for some rows in report? (according to value of column)
regards
siyavuş

Hi siyavuş
You can do this by taking the edit link off the report and putting it into your report SQL.
Use something like Select CASE WHEN (condition) THEN
'Put your edit link in here as an html Anchor like<a href="(target)">Edit</a>'
ELSE
tt.value
END edit_link
FROM test_table tthope it helps,
Gus..
You can reward this reply (and those of other helpers) by marking it as either Helpful or Correct.
This allows forum users to quickly find the correct answer.
;-)

Any SAP standard report on Asset scrap values?

Dear All,
Do you know of any Standard SAP report for asset scrap values? A customer needs to have the scrap values reported and would like the same in summary (asset class level) and detail (individual asset level).
Help appreciated.
Thanks and Regards,
Sameer Aroskar

Hi Sameer,
I am sending you the list of all standard reports in SAP for Asset accounting
Menu Path                                                                  Report
Asset Balances -> Balance Lists -> Asset                       Balance List
Balances
Asset Balances -> Inventory Lists -> Physical                  Inventory List
Inventory List
Notes to Financial Statements -> International                 Asset History Sheet
Explanations for P&L -> International                              Total Depreciation, Ordinary Depreciation,
                                                                                Special Depreciation, Unplanned Depreciation,
                                                                                Transfer of Reserves
DepreciationExplanations for P&L -> International            Write-Ups, Depreciation Comparison, Manual
                                                                                Depreciation
Cost Accounting                                                         Depreciation and Interest
Depreciation Forecast                                                   Depreciation on Capitalized Assets (Depreciation
                                                                                Simulation)
Preparations for Closing -> International                         Gain for Transfer of Reserves, Changes to Asset
                                                                                Master Records
Day-to-Day Activities -> International                             Asset Transactions, Asset Acquisitions, Asset
                                                                                Retirements, Intracompany Asset Transfers,
                                                                                Directory of Unposted Assets , List of Origins Of                                                                              Asset Debits, List of origin of cost elements
I Hope this will help.
Award points if of any use.

MCBE report-drilldown variance in values

Similar Messages

Maybe you are looking for