Measurement Computing USB-SSR24 error 42 Digital Port not configured correctly for requested operation

Using LV 2012 and ULx 2.02 LV driver:
LV is throwing an error 42 (Digital Port not configured correctly for requested operation) from the ULx write VI but only on PortCH. All my configurations are correct on the hardware and Instacal tests the ports OK. I've reinstalled everything and still see the same issue.
Since PortA is configured identical to PortCH, and PortA is functioning fine, I'm stumped. This is occuring on two different SSR24 DAQs so I don't think it's the hardware, plus I've already mentioned that the Instacal isn't having a problem with it.
I've attached my VI I'm using for debug.
Jeff
Attachments:
test of Wilmington.vi ‏19 KB

I worked with Measurement Computing and they agreed that there is a bug with certain DI/DO configurations. There are a possible 16 different DI/DO configurations with the hardware and apparently mine (PortA - DO, PortB- DI, PortCL-DI, and PortCH-DO will throw this error for PortCH. I'm currently using .net calls to work around the issue until the ULx driver is updated. I'll post that when I see it. Attached are the .net VI's that I'm using for simple static IO.
Attachments:
USB SSR DOT NET Write Bit.vi ‏20 KB
USB SSR DOT NET Read Bit.vi ‏21 KB

Similar Messages

Lookup Query error: "Lookup properties not configured correctly"

Hi!
I have come up with some problems on configuring lookup query.
I get this error: "Lookup properties not configured correctly" on admin console-->user-->manage-->selecting the user-->Resource profile-->edit the process form
I created a table called "test_lookup" with the following columns: Oraganization, division and position (all varchars) in the database.
For Lookup Query:
This were the steps done on design console -->form designer-->properties tab:
On " Grupo(lookupfied) " I set the following properties:
Column widths = 100
Lookup Query = select Organization from test_lookup
Lookup Column Name = Grupo_teste
Column Caption = Organization
Column Names = Grupo_teste
On design console for Lookup definiton I set the following:
code: Lookup.KON.Grupo_teste
field: Grupo_teste
Lookup type: checked
Required: uncheked
Code key | Decode Key
Organization Organization
Any idea why this is hapenning? Any suggestion is more than welcome!
Thank you.
Kind Regards,
Kon

Refer this:
User list lookup
Column Names = usr_key,usr_first_name,usr_last_name
Lookup Column Name = usr_key
Lookup Query = Select usr_key, usr_first_name, usr_last_name from usr //(where act_key=123)
Column Captions = User Key,First Name,Last Name
Column Widths = 10,100,100
Have you tried this:
b)Select ACT_KEY from USR where USR_LOGIN = '$Requester Information.User Login$'
In lookup coloumn name=act_key
In coloumn width =100
In coloumn names=act_key
in coloumn caption =Organization Key

Error: property is not set correctly for User Defined Fields.

Hi Gurus,
I am trying to define a new field Department of type Lookup. For this i have created a new field in user defined fields. But when i click on create user in web console it give me "property is not set correctly for User Defined Fields."
I created a lookup field for department , but looks like i have to some kind of mapping. How can it be done?
Thanks,
sat

Hi Kevin,
I couldnt get it done. This is what I had done so far.
Created Lookup.Users.Dept ( with code code=23 & decode=treasury)
Added two field in xlwebadmin.properties & xlwebadmin_en.properties
lookupfield.header.users.deptcode=Department code
lookupfield.header.users.deptname=Department name
In my lookfield properties in
column caption=Department code,Department name
Column query= Not sure what to give? here
Thanks,
sat

Error in FTXP -Calculation procedure not maintained correctly for level 000

Hi Guru
I am creating a new tax code A7 through trx. FTXP. It is a copy of another code A1 and only percentage needs to change for eg. from 60% to 25%.
After changing while saving i get error - 'Calculation procedure not maintained correctly for level 000 Message no. FS789'.
Could you please help me to understand why i get this error while i am only copying an existing tax code A1 and just changing the %.
Thanks
Reg
SAPasmita

Hi ,
Go to tcode OBYZ Then select procedure select the appropriate procedure defined for your company code and then select the control data in the control data tree there will be different step first step will be
step   description                              from to
100    base amont
110    rounding down output tax ,    100
120 round off input tax
then in the round down output tax in FROM column mentioned from which step the output tax be rounded an exampleis provided for better understanding.if the from is not mentioned the error will appear

DasyLab spurious crashing - Measurement Computing USB Pods ?

Hi Team.
Am running a DasyLab (V12) program which accesses a pair of Measurement Computing USB Pods.
The intention is to run a research lab instrument continuously - 24/7 so to speak.
The system is essentially fine, and can run perfectly for as long as say 24 hours, but then halts with a" Sampling Error " stock message
referring to loss of visibility of one of our USB pods.
We are using a sensible and conservative timebase.
Now I do realise that we may be experiencing inductive interference in our control pathways.
The machine is ultimately a high voltage and high current distributed lab assembly.
We are paying good attention to good engineering practice and managing ground and earth returns as best we can.
The USB pods are quite some distance from the PC but we are using active drive USB cabling certified to the distance ( appx 15 m )
The PC is clean and not overburdened.
Any insight or similar experiences would be welcomed.
Thanks
Jack Sprat

You have provided insufficient information to diagnose a problem.
There is an updated MCC-DRV 12.1 on the Measurement Computing web site.
You should also be running the DASYLab 12.0.1 service pack update.
You should also be running a recent version of instaCal and the Universal Library (V6.23 or later, 6.25 is the current release).
For a 24x7 application, you have to agressively turn off power management. Microsoft does not configure your Windows computer for 24x7 operation.
You have to determine which USB hub your device is connected to (not that easy for the ones that use the HID driver), and disable power management. With the exception of allowing the screen to blank, you should not have any power management enabled... don't let the hard drive sleep, don't let the CPU sleep, and whatever else, don't let Windows put the USB hub to sleep!
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

Measurement computing USB-QUAD08

Hi,
Does anyone out there have any experience with Measurement Computing USB-QUAD08 board? I normally stick with NI DAQ only, but I was looking for a USB DAQ with 8 timer/counter channels and that's the only one I could find.
I'm trying to measure the period of a digital PWM signal. Specifically I want to capture 50-500 consecutive pulse periods into an array (measure period between falling edges) which are 100-10000us in duration.
At any rate, the example from their website (attached) utilizes .net references, which I am not familiar with, does not seem to do what I need.
If anyone out there has worked with this device and would like to modify the attached VI to accomplish what's needed, I would greatly appreciate your help.
-martin
Attachments:
Period Mode Scan Mode_v1.vi ‏33 KB

I don't have any experience with the module you listed, but I do use USB-1208 quite a bit. Have you tried using the labview vi's that come with the device?
Reese, (former CLAD, future CLD)
Some people call me the Space Cowboy!
Some call me the gangster of love.
Some people call me MoReese!
...I'm right here baby, right here, right here, right here at home

PI MDM Adapter Error - MDM port not found

We are working on an R/3 - PI - MDM scenario using the PI MDM Adapter. We are currently encountering the following errors.
In RWB - Communication Channel Monitoring
MDM Adapter listener could not start due to: Can not create repository session '<server=XXXXXXXX serverUser=Admin repository=Product user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server 'XXXXXXXX' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer
In RWB - Message Monitoring
2009-09-08 15:31:22 Error Message could not be forwarded permantely to the JCA adapter. Reason: System error: MDM port not found
2009-09-08 15:31:22 Error Message could not be forwarded to the JCA adapter. Reason: Permanent error: Adapter call failed. Reason: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: MDM port not found
2009-09-08 15:31:22 Error Adapter Framework caught exception: System error: MDM port not found
2009-09-08 15:31:22 Error Delivering the message to the application using connection MDM_http://sap.com/xi/MDMAdapter failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: MDM port not found.
Is there an issue with our receiver communication channel and the MDM Access Parameters? We are using the Port code and Remote System code provided by the MDM team.
Anyone experience this same issue?

We are no longer seeing the MDM Port Not found error, but we are still seeing the UnknownServer error. Looking at RWB Message Monitoring it appears that the message is successfully sent to the MDM server, but nothing is coming into the Ready folder. Any ideas on where the message is going, and why it is not showing up in the Ready folder?
In RWB - Communication Channel Monitoring
MDM Adapter listener could not start due to: Can not create repository session '<server=XXXXXXXX serverUser=Admin repository=Product user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server 'XXXXXXXX' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer
In RWB - Message Monitoring
2009-09-11 14:04:15 Information The message was successfully received by the messaging system. Protocol: XI URL: http: //XXXXXXXX/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
2009-09-11 14:04:15 Information Using connection MDM_http ://sap.com/xi/MDMAdapter. Trying to put the message into the receive queue.
2009-09-11 14:04:15 Information Message successfully put into the queue.
2009-09-11 14:04:15 Information The message was successfully retrieved from the receive queue.
2009-09-11 14:04:15 Information The message status was set to DLNG.
2009-09-11 14:04:15 Information Delivering to channel: MDS_TEST_CC
2009-09-11 14:04:15 Information The message was successfully delivered to the application using connection MDM_http ://sap.com/xi/MDMAdapter.
2009-09-11 14:04:15 Information The message status was set to DLVD.
I thought the implementation of the MDM Adapter was suppose to be straightforward and simple
Edited by: Chris Williar on Sep 11, 2009 9:56 PM

CS4 won't start up on my new computer. The error message I get is "Licensing for this product has stopped working."

CS4 won't start up on my new computer. The error message I get is "Licensing for this product has stopped working." Both the old and new computer are MACs and the error code I get is 150:30. It says to restart the computer or open another application in the suite, but neither helps. It says if nothing helps to contact Adobe support, but this is the only way I'm given to contact adobe support. Can I really not use my purchased software on my new computer? What do I do to activate the license on the new computer?

"Licensing For This Product Has Stopped Working" - Help

"Error: PLL is not configured on Oracle server." appears on some computers

Hello,
We configured the custom.pll file so that we can capture UPK with context IDs.
We can capture UPKs just fine and it records all available context IDs on MOST computers. However, we have a couple of people that get the custom.pll error (Error: PLL is not configured on Oracle server.), and obviously, their UPK captures do not capture the context IDs.
We all use the same version (UPK Client 3.6.1) and we all are capturing in the same instance where custom.pll has been configured.
Why are some computers getting the error?? How can we resolve this error?
Can somebody help?
Here are some of our specs:
UPK: Client 3.6.1
EBS: 12.1.2
Computer: Windows XP Professional SP3
Thank you.

Hello,
You are correct that the document describes configuring the PLL for help menu integration, but it is necessary that this configuration be done before recording, which is why you're seeing the messages. We do not want customers to record content and later find out that the PLL was not configured properly for deploying via the help menu.
If you follow the steps in this document, the error messages should go away.
I hope this is helpful.
Best regards,
Marc

Audition CS6 - "An error was encountered: Not enough memory to perform operation"

When I try to export my entire session using the "Multitrack Mixdown" I get this error message: "An error was encountered: Not enough memory to perform operation"
To give context:
• Audition CS6
• All other applications are closed
• 26 audio tracks
• Approx. 22 seconds long in total
• Average of 2 effects per track
• I've reinstalled the program twice now
My computer:
• iMac (2010)
• 3.4GHz Intel Core i7
• 16 GB 1333 MHz DDr3
• Flash and HDD storage (which are not full)
• OSX 10.8.2
If anyone can offer any advice, that would be great!
I have to get this done by this Monday (May 6, 2013).
So I really hope Audition won't fail me, since it has always been successul until now (which is why I'm stumped).

'Not enough memory' hasn't got anything to do with your HD, but the amount of RAM available to Audition at the time it needs it. All DAWs, to work efficiently and successfully, need most of the machine to be free from running other apps. The reason for this is simple; If another app trys to hog a machine that's running a process in real time, it inevitably hiccups the machine. And if this other app has reserved RAM addresses for its own use, they aren't available until it's stopped.
Typical nasties involve anti-virus software, and the machine doing things like repeatedly polling a wireless connection, but there are plenty more, and this applies equally to Macs and PCs.
So the 'update' you need to rectify most of these problems is one you have to carry out yourself. Audio editing is a bit of an oddball from this POV - you invariably need a very lightly loaded machine for it to be reliably successful. The machine I use as a DAW doesn't do anything else at all; all unnecessary services are stopped whilst it's in this mode, and the physical spec of it is similar to yours - except it's a PC running W7-64Pro.

SPICE Netlist error, element 'that4301:':Not enough terminals for device type 'Tranline'

Hi as anyone come across the following or a similar error and found a solution?
SPICE Netlist error, element 'that4301:':Not enough terminals for device type 'Tranline'
The element that4301 is a vca I imported a model for.

Here's the model for the VCA:-
*THAT4301 VCA MACROMODEL
*CONNECTIONS:
* Iin - Current Input
* | Ec+ - Positive Control Port
* | | Ec- - Negative Control Port
* | | | Sym - Symmetry Adjust Terminal
* | | | | Vcc - Positive Supply Voltage
* | | | | | Vee - Negative Supply Voltage
* | | | | | | Iout - Current Output
* | | | | | | | GND
* | | | | | | | |
.SUBCKT 4301VCA_THAT P17 P15 P16 P14 P11 P10 P13 P9
J1 3 P17 1 FET 4
J2 4 P9 2 FET 4
CIN P17 P10 50pF
RS1 1 7 2.4K
RS2 2 7 2.4K
I1 P11 7 120uA
C2 3 4 20pF
RD1 3 P10 1K
RD2 4 P10 1K
GA P11 8 4 3 .001
RC1 8 0 12.6MEG
CC 8 5 55pF
RC2 5 P10 3K
EA P11 9 8 0 1
RA 9 10 820
CZ 9 10 300pF
Q1 10 10 11 QNPN
Q2 10 10 12 QNPN
RE1 11 13 1
RE2 12 14 0.9
Q3 P17 P15 13 QPNP
Q4 P13 P16 14 QPNP
Q5 P17 P16 15 QNPN
Q6 P13 P14 16 QNPN
RE3 15 17 1
RE4 16 18 0.9
Q7 19 19 17 QPNP
Q8 19 19 18 QPNP
COUT P13 0 35pF
I2 19 P10 6mA
IBIAS 0 6 30uA
Q9 6 6 20 QNPN
Q10 0 0 20 QPNP
EBIAS 10 19 6 0 2
.MODEL FET PJF(VTO=-1.46 BETA=1.67E-4 IS=10E-14)
.MODEL QNPN NPN(IS=6E-15 BF=250 VAF=95 CJE=7.5pF CJC=2.7pF)
.MODEL QPNP PNP(IS=4.7E-14 BF=125 VAF=50 CJE=20pF CJC=33pF)
.ENDS

Error "codepage could not be determined for the receiver-system"

Hi,
we use the idoc-adapter to send message from mySAP ERP to PI.
All worked fine.
So, this morning I have changed the datatype of the messageId from "char" to "int" in mySAP ERP in the customizing menue (install param). So, no message received in SAP PI.
When I start transction "we05" in mySAPERP" I get the following error:
"codepage could not be determined for the receiver-system" status 02.
I have changed the datatyp to "char" but the same probleme
Can anybody help me please?
Regards
Stefan

This error shouldn't occur unless there is some modification at the OS level codepages.
Please check the entried in the RFC destination for connecting to the XI system. Unicode settings.
Regards,
Prateek

Getting " Not enough memory for the operation error " in BOE

Hi,
We are using BOE 11.0.
we try to schedule a new report with multiple database logins for testing in BOE. When we run the report we are getting error like "Not enough memory for the operation error"
The same report has been executed successfully when we run using Crystal reports developer. The report is fectching less than 10K records from all the databases together.
Please let me know which is causing the issue and also let me know is there any limit in the number of databases connecting for a single report.
many thanks in advance for all your help.
Cheers,
Suri ;-)

Hi Sarthan,
Sorry. I'm new to BOE. We know only scheduling the reports creating folders etc. :-)
I've seen one parameter "Maximum Cache Size Allowed (KBytes)" and the value for this parameter is 5000.
If we change it to a big number whether we can solve the issue ? Please suggest.
Cheers,
Suri ;-)

Error has occured during install before the requested operation for i tunes could not be completed your system has not been modified

error has occured during install before the requested operation for I tunes could be completed Your system has not been modified to complete the install run the installer again and I have it still won't work

See:
Trouble installing iTunes or QuickTime for Windows

TS3694 Trying to install new version of I tunes. Get the following error msgs:Itunes not installed correctly reinstall (Windows error 126), and missing file MSVCR80.DLL?

Trying to upgrade Itunes get the following error msgs: Itunes not installed correctly reinstall (Windows error 126) and missing file MSVCR80.DLL?

Click here and follow the instructions. If they don't work, perform a complete reinstallation (Windows XP, Windows Vista and newer).
(98972)

Measurement Computing USB-SSR24 error 42 Digital Port not configured correctly for requested operation

Similar Messages

Maybe you are looking for