MeetingPlace Express strange problem !

Environment:
MeetingPlace Express 1.1.1.11
CallManager 4.1(3)sr2
Voice Gateway 1: 2821 (c2800nm-advipservicesk9-mz.124-4.T.bin) + VIC2-4FXO
Voice Gateway 2: 2621XM (c2600-advipservicesk9-mz.123-14.T5.bin) + NM-2V + 2* VIC-2FXO
VG1 connect to CallManager using H.323, VG2 connect to CallManager using MGCP
MeetingPlace Express connect to CallManager using H.323.
Problem:
When dial-in from PSTN to VG1 and VG2, both are well; but when using "Find-Me" feature, MeetingPlace express dial to user, users via VG2 are can sent dtmf with MeetingPlace Express, but users via VG1 can not sent any dtmf digit to MeetingPlace Express. So users via VG1 can not enter the meeting.

For more information the following url would be useful,
http://www.cisco.com/en/US/products/ps6533/products_installation_guide_book09186a008057b547.html

Similar Messages

Disk space problem on MeetingPlace Express

I get the email below daily. I'm thinking it's ok to cat /dev/null the cma.log file?
I also think I might be able to do the same thing to stdout.old?
Anything else I should try other than the instructions?
* Directory listing
[mpxadmin@meeting ConfSchd]$ ls -la
total 3036516
drwxrwxr-x    2 mpxadmin mpx          4096 Aug 2 13:27 .
drwxrwxr-x   17 root     mpx          4096 Nov 4 2009 ..
-rw-rw-r--    1 mpxadmin mpx             0 Nov 4 2009 ActConf.lk
-rw-rw-r--    1 mpxadmin mpx             0 Nov 4 2009 Attach.lk
-rw-rw-r--    1 mpxadmin mpx             4 Dec 22 2012 confId
-rw-rw-rw-    1 mpxadmin mpx           391 Apr 5 2010 pegstats
-rw-rw-r--    1 mpxadmin mpx        255639 Aug 2 14:25 stderr
-rw-rw-r--    1 mpxadmin mpx       1152127 Dec 22 2012 stderr.old
-rw-rw-r--    1 mpxadmin mpx      516106727 Aug 2 16:50 stdout
-rw-rw-r--    1 mpxadmin mpx      2588797008 Dec 22 2012 stdout.old
-rw-rw-r--    1 mpxadmin mpx             0 Nov 4 2009 TCMap.lk
[mpxadmin@meeting ConfSchd]$
* EMAIL
This is an automated message from the MeetingPlace Express system with
hostname [meeting.afgrp.com] to inform you that disk space is low.
Details on where the problem is and how to resolve it are indicated below.
Low space in partition /. Percent used = [90].
The following files might cause trouble. However, inspect each one to make sure.
Look specifically for large files with old timestamps. Also, note that some of
the files indicated might have been previously mentioned. In this case, use the
prior instructions to handle these files rather than the instructions below.
If you are uncertain, contact Cisco TAC for confirmation/advice.
For the files below, use the following procedure to empty these files rather than
   delete them outright.
         1. For each file to be emptied do:
             cat /dev/null > <filename>
         2. After all files that you wish to empty have been emptied, do:
             su   // Enter 'root' password.
             mpx_sys restart
-rw-rw-r--   1 mpxadmin mpx     283120801 Apr 11 02:00 /var/mp/ConfSchd/stdout
-rw-r-----   1 root     root     127007041 Dec 22 05:30 /var/spool/compaq/cma.log
In general, to free up disk space where it is uncertain exactly what files are in question,
   do the following:
1. In general, go to places like /root, /mpxadmin, /tmp and do "ls -la" to look
     for large files. If a file is large, old, and seems like some kind of log or
     error file, it could be a candidate for deletion.
2. Generally files of type log (*.log), stderr, stdout, or txt (*.txt) are the
     best candidates to look for. A good command to look for these types of
     files with size of 10,000,000 bytes or larger is:
       find / -name "<file type>" -exec ls -la {} ; | awk '{if( >=10000000) {print} }'
     For example, to look for all log files 10,000,000 bytes or larger on
       the entire system:
         find / -name "*.log" -exec ls -la {} ; | awk '{if($5 >= 10000000) {print} }'
3. If you have a specific problem partition that you are trying to reduce size
     for, do the following:
     1. Find out the directory name of the top of the partition from "df".
     2. "cd" to that location.
     3. Then do: du -x -b --max-depth=1
     4. Look for the directories that are really large.
     5. Then "cd" into the worst subdirectory (or subdirectories).
     6. Get a list of all large files from current directory location and lower:
           (This example assumes 10,000,000 bytes and a check for .log files.
               Note the starting location of '.' (current location) rather
               than '/' (entire disk) ).
           find . -name "*.log" -exec ls -la {} ; | awk '{if($5 >= 10000000) {print} }'
Complete output of the 'df' command:
Filesystem           1K-blocks     Used Available Use% Mounted on
/dev/sda1             6048320   5111204   629876 90% /
/dev/sda6             4032092   767336   3059932 21% /common
/dev/sda2             8064304   6492268   1162380 85% /db
/dev/sda9               256667     8416   234999   4% /grub
/dev/sda7           122154520   110696 115838720   1% /mpx-record
/dev/sda5             5036284   3577128   1203324 75% /opt
/dev/sda3             6048352   109032   5632080   2% /partB
none                   1026932     22624   1004308   3% /dev/shm

Hi Josh,
It seems that the root partition of the MeetingPlace Express server is almost full. I have attached a document for your reference which can be used to minimize the disk space issues.
Once the steps mentioned in the attached document are completed, run the command "df" to check the disk space.
If you do not see much improvement in the root partition, then in that case some other files might need to be removed from the server to increase the root partition space.
If any of the partitions reach upto 90% or above, then the server might behave unexpectedly.
Feel free to revert if you have face any issues or have any queries.
Regards,
Rishabh

Strange Problem with Toshiba Express Media Player on Satellite M115-S3094

I'm experiencing a strange problem in my Toshiba M115-S3094, which was pre-installed with Windows XP Media Center edition and which also had the Toshiba Express Media Player.
I had previously done a clean Vista installation on it, and then I decided to revert back to XP with my recovery DVD. I did the same procedures of first installing Express Media Player from Backup (which I made when i purchased the laptop) and then installing XP from Windows XP recovery DVD from Toshiba.
The steps included:
1- Deleted partitions from Express media player recovery disk
2- Installed express media player
3- Recovered Xp from Recovery DVD, by selecting "Recover without changing Partitions" (there is no expert mode)
Everything went very well (i.e. the installation)......But now after shutting down my laptop as I press the Express Media Center button, the "Express Media Player" logo appears on the screen after loading for 5 seconds laptop shutdowns,
I tried to open it again and again but the logo appears for 5 seconds and then my laptop shutdown....
Laptop works fine when I logon to windows by pressing power button.
Can anyone help on this strange issue..?

Hi Jaba
Thnx for reply.
Now i would answer the questions asked by you and try to clear you confusion,
Yes, Express Media Player was previously installed on my machine, and I have used it, it was perfectly working.
About installation of Media Player, The whole story is that, firstly i wasnt known about how to make a Toshiba express media player recovery cd through windows, so downloaded an ISO of the media player from a forum and install media player by first deleting partitions.
After that I can again installed xp through recovery dvd and choose the option "out of box" state and then selected "install without changing partitions"
After a successfull recovery, I shutdown my pc and pressed the media player button, the media player logo appeared for 5 seconds and then my laptop shutsdown, this is happening all the time when i start my laptop by the Express media player button.
After this I read somewhere how to create a backup recovery cd for Express media player, So i run the recovery disk creater and made a backup of Toshiba Express media player.
After doing the above procedure I again formated my hard drive through recovery dvd and selecting the option "Delete partitions and overwrite sectors". When this was finished, i booted my laptop with the newly made recovery cd for express player, after selecting English as my language, This it what said:
"Installation Error" An error occured due to wrong system ID or unsufficient space on hard drive, press escape to quit.
THE ABOVE IS THE WHOLE PROCESS IN COMPLETE DETAIL.
AND JAMA,
About the link you provided, it says that on the Recovery dvd select the option for "Expert Mode", but in my recovery dvd (for Toshiba M115- S3094) there is no such option as expert mode, there are only two options
1- Restore laptop to "out of box" state
2- Format Hard Drive

MeetingPlace Express 1.1 NFR Installation Problems

Hi.
On the installation guide of meetingplace express shows the MCS 7825H-3.0-IPC1 as a supported server and the DVD should be capable of booting itself and install the Linux OS and then the Cisco Application.
I'm trying to install the NFR in an MCS-7825H-800 instead of the MCS 7825H-3.0-IPC1 but the DVD will not boot automatically. The MCS-7825H-800 comes with a CD ROM but I changed it to a DVD ROM. Any ideas? I don't have an MCS 7825H-3.0-IPC1 at the moment and I would like to install the MeetingPlace Express NFR to test it out.
Thanks in advanced,
-Jose

Installing Cisco MeetingPlace Express, refer to the
http://www.cisco.com/en/US/products/ps6533/products_installation_guide_chapter09186a00805a7988.html#wp1164664
http://www.cisco.com/en/US/products/ps6533/products_installation_guide_book09186a008057b547.html

MeetingPlace Express 2.1.1.2 Dial Out was not Successful

I'm configuring a MeetingPlace Express v.2.1.1.2 and I can't make the MPX do the call to the guests of a meeting.
I make the configuration test in: Services > Logs > Verify Configuration > Call configuration verification and show the following error:
==============================================================
==============================================================
Call-Config Report
Summary
WARNING:The H.323 ID should match the host name
Valid E.164 Address has been configured
H.323 gateway has been configured
Error: Dial Out was not Successful
Call-Config Report Details
H.323 Details
H.323 enabled : YES
E.164 address : 196
H.323 ID : mpxadmin
H.323 gateway 1 : 010.145.002.030
SIP enabled : YES
DialOut Session Summary
VUI Configuration: 250 Sessions, 250 Confs
*** VUI INTERNAL STATUS UTILITY ***
DebugMenu:
1) Quick Status of all Ports 4) Make Test Call
2) Verbose Status of Port Range 5) Show All Confs
3) Display complete Port Information 0) Quit
Enter the Command (0 -- 100) []: You entered 4.
Enter destination for your call: The Telephone Number is 196. Len is 3
Do you want specific ports? (t -- F): You entered f.
Placing Call .....Call was unsuccessful: Ring No Answer.
DebugMenu:
1) Quick Status of all Ports 4) Make Test Call
2) Verbose Status of Port Range 5) Show All Confs
3) Display complete Port Information 0) Quit
Enter the Command (0 -- 100) []: You entered 0.
==============================================================
==============================================================
That parameter could check?
Here I place information on the configuration of my network:
CUCM v.7.0 --> 10.145.2.10
Voice Gatweay --> 10.145.2.30
In CUCM > Device > Gateway --> Gateway: 10.145.2.20 | Description: Cisco MeetingPlace Express | Type: H.323 Gateway | IP: 10.145.2.20
Please expect your valuable help!
Thanks a lot!
ErnestoG

hi Ernesto,
As the problem you are facing is a dial out issue on MPE, go
through the checklist mentioned below in order to confirm the configuration
is intact.
Here is the checklist :
1.    Ensure that H323 GW is defined on CCM/CUCM.
Device > Gateway > find.
Look for a device name that equals either MPE's hostname, FQDN, or IP
Address.
2.    Ensure that h323 Gateways are configured on MPE.
MPE Administration Center > System Configuration > Call Configuration > H323
Configuration
Ensure that h323 is enabled.
Ensure that you have entered your CCM's IPs in h323 Gateway 1, 2
3.    Ensure that CCM's interface with MPE is up.
Ensure that MPE's IP Address is listed under the "IP Address" column.
Ensure that this IP Address is that of the FIRST NIC on MPE, not the second.
4.    Verify that MPE has the CSS required to call the destination.
FIRST, FIND MPE's CSS:
When MPE places a call, the CSS in question is Device > Gateway > MPE-GW >
Inbound
THEN the relevant config is under Device > "Call Routing Information -
Inbound Calls" > Calling Search Space
SECOND, FIND DESTINATION PATTERN's PARTITION:
If the destination is an IP Phone within the CCM/CUCM Cluster, then the
relevant config is under Device > Phone > click on Directory Number in CCM.
If the destination is a PSTN endpoint/phone, then the relevant config is
under Device > Route Pattern.
5.    Ensure that your user profile is set to allow outdials.
MPE Administration Center > User Configuration > User Profile Management >
Your User Profile > Can call out of meetings should be set to "Yes".
6.    When you place a call from from the CLI, the system applies permissions
from the "Guest" User profile since mpxadmin or root are not Users within
the MPX application. To allow this to work, you need to verify two
settings:
MPE Administration Center > User Configuration > User Profile Management >
Guest > Can call out of meetings should be set to "Yes".
Ensure that the Guest profile is not in a "locked" state.
MPE Administration Center > System Configuration > Usage Configuration >
Allow Guest outdials should be set to "Yes".
Hope this helps!
Thanks,
Karthik

A very strange problem in netbeans

i debug a project in netbeans,a a very strange problem happens.
a member variable was different between wtk20 and wtk22.and the variable was changed many places so it's hard to trace!
but there hasn't the problem when i debug project in jbuilderx!

My problem is, even I've written the SQL in the correct syntax, in my java code, it just look like this
adc.SQL("insert into test(subject, content) values('" + sf.filter(subject.getText()) +"'"
                              + "," + "'"
                              + sf.filter(board.getText()) + "')" );
                              subject.setText("");
                              board.setText("");
where subject is a textfield and board is a JTextArea and sf is a string filter which use regular expression, I basically want to insert the string in these component into the database, Many strings work, but client for updates can't be inserted.
With my best,
Zike Huang

MeetingPlace Express Assistance

Hi All,
We have MeetingPlace Express version 2.1.1.2.
We need to configure it to accept any user to make a non-scheduled conference directly, without requesting the user to enter his profile ID and profile password, and without the need to add the data of the users into the MeetingPlace.
We just need it to act as an audio conference bridge, so we need the user to dial the MeetingPlace number, then he can enter a certain password (one password for all our staff) to enable our employees to log into the MeetingPlace, and then get the Meeting ID and Meeting password and start the meeting.

Sherif,
You are going to want to export using all of the headers and leaving them intact in the import file. You will want to follow the steps below for a successful import as the system is really sensitive that the data is formatted a certain way.
Create a test user profile in MPE manually so that you can get the file format of the import file with the headers.
Export User Profiles.
Export this test user profile to a file and include the header information.
This will create a User_Profiles.txt file that you will save and then open up in Excel. (Follow these steps below to ensure that the file is formatted correctly)
1. Within Excel, click on the Open tool on the toolbar. Excel displays the Open dialog box. (To display this dialog box in Excel 2007/2010, click the Office button and then click on Open.)
2. Using the Files of Type drop-down list at the bottom of the dialog box, indicate that you want to open Text Files (*.prn; *.txt; *.csv).
3. Select the saved export file.
4. Click on Open. Excel starts the Text Import Wizard, displaying the Step 1 of 3 dialog box.
5. Make sure the Delimited choice is selected, then click on Next. Excel displays the Step 2 of 3 dialog box.
6. Select Comma as a delimiter, then click on Next. Excel displays the Step 3 of 3 dialog box.
7. Click on Finish. Your file is imported.
8. Once the file is opened up in Excel, import your users into this spreadsheet so that they conform to the necessary format and the required headers.Next, find the "isLocalUser" field and set the parameter value for al user profiles from "No' to 'Yes'. Then find the EncryptedProfilePWD and EncryptedUserPWD fields. Remove the 'Encrypted' portion of the field name in the header so that they now read ProfilePWD and UserPWD. Make sure the value for the ProfilePWD for these user profiles is a standard alpha password. (cisco) Then make sure the value for the UserPWD for these user profiles is a standard numeric password. (12345). You may just be able to leave them as they are from your import.
9. Save the file with the changes.
10. Go to the Application MPE Web Page and then Maintenance-->Import Data-->Import User Profiles.
11. Select 'Add Profiles To System', select file to import, and set Overwrite field to 'Yes". (You should also set the log information to file option.)
12. Hit 'Execute' to import the user profiles to the system.
13. Once this is completed successfully, then go check the User Profile configuration to ensure that all users are imported correctly into MPE.
If you run into any problems with this procedure, please open an SR with TAC so that we can assist further.
Thank You,
Gerry

MeetingPlace Express User ID Change

I am running MeetingPlace Express 2.1.1.2 and it is AD/CCM Integrated. We in the process of changing our AD User login ID and I may have run into a problem. From Call Manager perspective I just perform a full sync and it is good when a change is made.
However I cannot modify the user ID in Meeting Place Express.In reading the on line help, it says "Deleting a user profile also results in the removal of all meetings scheduled by that user from the end-user web interface; however, any meetings scheduled by that user still exist in the system" Does that not contradict itself?
When I add the user back with the same profile ID, will it re-associate the scheduled meetings? Also, is there a way to manually modify/sync the user id rather than deleting and re-adding?
Thanks, in advance.
Doug

I still don't understand how and when you are encountering that obstacle, but nevertheless if you cannot surmount it you will have to solicit Apple's help.
Apple can reset your iPhone if you present them its original, dated sales receipt. I believe you will have to do that in person at an Apple Store or an Apple Authorised Service Provider.

MeetingPlace Express callout feature not working

Hello ,
we have Cisco Unified MeetingPlace Express 2.1.1.2 .
I am able to make audio/web confrence .
But call out facility is not working .
Please let me know what configuration need to be done for getting call out facility on CUMP
Below call out features are not working .
1-Call -alram
2-operator assistence while dialing 0
3-dialing from webconf
4- dialing from phone view
CUCM version 7.1
Meeting place i have confifured as h.323 h/w in CUCM
Thanks ,
Shaijal

Hello,
After restarting CUMP server my problem got resolved .
I gave below command to restart the system from the root .
/sbin/shutdown/ -r now
Thanks,
Shaijal

Strange problem with CachedXPathAPI

Hi,
I have a strange problem when using CachedXPathAPI.selectNodeList(node, nodeName);
If the nodename is replace with a string literal e.g
nodelist = cachedXPathAPI.selectNodeList(node,"//ROW");or with a variable name that uses a literal e.g
String nodeName = "//ROW";
nodelist = cachedXPathAPI.selectNodeList(node,nodeName);Then the nodelist is retured perfectly fine.
However, if the nodeName comes from a hashMap e.g.
String nodeName = (String)hashMap.get("NODENAME");
nodelist = cachedXPathAPI.selectNodeList(node,nodeName);then I get the following exception:
org.apache.xpath.XPathException: Can not convert #STRING to a NodeList!Has anyone got any ideas why this is happening or how I can get around it?
Thanks
Jag

A String is a String. The program doesn't know it came from a hashmap. So the difference must be related to the contents of the String. Which you haven't showed us. Perhaps you don't even know what it is yourself... in which case you should find out. My bet is that it's an XPath expression that yields a result tree fragment, but I really don't know enough about that API for that to be more than a guess.

MeetingPlace Express 2.1 Record Meeting issue

Hi,
I have a problem when I try to record a meeting. The error message is:
"MeetingPlace Express failed to start recording, internal error."
Any idea what's wrong?

You can enable or disable an automatic backup.
If the automatic backup is enabled, an L0 backup happens twice a week, every Monday and Thursday
at 11:00PM, local server time. The L1 backup is run each day at 1:00AM,local server time, while the L2 backups are done daily at 4:00AM,
8:00AM, 12:00PM, 4:00PM, and 8:00PM, local server time. The schedule is stored in the crontab file.

Cisco MeetingPlace Express Web Conferencing Stops Working

My MeetingPlace Express Version is 1.1.2.1001,but not 1.1.1.The error message received when attempting to join a Cisco MeetingPlace Express web meeting room is shown below:
Your Account Has Expired.
You are getting this error message because:
You were trying to login to your account and it has expired.
You were trying to access a content, course or meeting and your
account has expired.
I thought it is not the MPE FN - 62447:
http://www.cisco.com/en/US/products/ps6533/products_field_notice09186a00806b3379.shtml
I have reinstalled the MPE,but the problem still appeared.I have modified the machine's nic mac and upload a different license,too.But the error information is still shown?Why?What shall I do?

Hi,
Here is the output of the df -h command. I beleave we have enough space.
ade # df -h
Filesystem            Size Used Avail Use% Mounted on
/dev/mapper/smosvg-rootvol
                      1.9G 316M 1.5G 18% /
/dev/mapper/smosvg-tmpvol
                      1.9G   36M 1.8G   2% /tmp
/dev/sda3             965M   18M 898M   2% /storedconfig
/dev/mapper/smosvg-recvol
                       93M 5.6M   83M   7% /recovery
/dev/mapper/smosvg-home
                       93M 5.6M   83M   7% /home
/dev/mapper/smosvg-optvol
                      141G   62G   72G 47% /opt
/dev/mapper/smosvg-usrvol
                      5.7G 1.2G 4.3G 22% /usr
/dev/mapper/smosvg-varvol
                      1.9G 101M 1.7G   6% /var
/dev/mapper/smosvg-storeddatavol
                      3.8G 146M 3.5G   4% /storeddata
/dev/mapper/smosvg-altrootvol
                       93M 5.6M   83M   7% /altroot
/dev/mapper/smosvg-localdiskvol
                       29G 6.9G   20G 26% /localdisk
/dev/sda1              99M   13M   82M 14% /boot
tmpfs                 3.9G 2.0G 1.9G 51% /dev/shm
Thanks
Jelena

Strange problem with Database LInk

Hi Everyone,
I have strange problem with Database Link in Oracle 11g Express Edition;
There are two computers: computer-server and computer-client. Tnsnames.ora are the same on both computers ie.
CT =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof)(PORT = 1521))
(CONNECT_DATA = (SERVICE_NAME = XE)
I created database link :
Create database link zdalny
Connect to <user_id> identified by <password>
using ‘CT’;
Client can’t connect with server when I am using above command. But when I change “using” for using ‘krzysztof:1521’ or using ‘krzysztof’ or using ‘server IP:1521’ – everything is ok.
Why I am asking. Because in all materials which I am reading about Oracle command with using ‘CT’ should be working correct. But there is not. Do you know, why?
Thanks in advance and apologize for my English.
Rgds
Krzysztof

Krzysztof Szymaniak wrote:
Thanks for all replies.
Below is server's tnsnames.ora
CT =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
SQL Error: ORA-12154: TNS:could not resolve the connect identifier specified
12154. 00000 - "TNS:could not resolve the connect identifier specifie
Rgds
Krzysztof
PS. I tried with using 'XE' - not working.Assuming that is the correct tnsnames, of course XE is not working. You don't have a tnsnames entry for 'XE'.
You need to be aware that when using a dblink, the client is the db in which the link is defined, not the desktop from which you connect to that database.
I think you need to start here:
http://edstevensdba.wordpress.com/2011/02/26/ora-12154tns-03505/
http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/ (Help! I can’t connect to my database )
http://edstevensdba.wordpress.com/2011/02/16/sqlnet_client_cfg/ (Help! I can’t connect to my database (part duex) )
The fact that your client (db link) is a database doesn't change anything taught in the above.

Strange problem with In-line If-Else block

Hi!
I've discovered a very strange problem with the following code:
enum Enum {
        A, B, C
    public static void main(String[] args) {
        Enum e = Enum.C;
        Object o = e == Enum.A ? 1 : e == Enum.B ? 2 : null; // Throws NullPointerException because of the null. Why???
    }I'm using Java 6
Thanks in advance!

Instead of guessing what the problem is, how about we go to [the source|http://java.sun.com/docs/books/jls/third_edition/html/expressions.html#15.25] and see what's actually happening.
Our line is
expr ? <int> : (expr ? <int> : <null>)Let's look at the inner conditional first. By JLS 5.1.8, we have two different types, neither of which is a reference type. The null is convertible to int, so we have two types convertible to numerics and we apply unboxing to the null, which is where your error is coming from.
Your fix works because Object is not convertible to int, so we fall through to the last case and use boxing on the ints instead of unboxing on the null.
Another way to fix this is to use Integers instead of ints. Since Integer is a reference type, we hit the third case and never try to unbox.
Object o = (e == A ? Integer.valueOf(1) : (e == B ? Integer.valueOf(2) : null))

I am facing a strange problem on new iphone 5 that I bought last week. The maps app and the places in photo gallery shows the pin and my location, however there is no information of locations. Tried to close the apps, phone restart, reset etc. Please help

I am facing a strange problem on new iphone 5 that I bought last week. The maps app and the places in photo gallery shows the pin and my location, however there is no information of locations. Tried to close the apps, phone restart, reset etc. I am accessing it via strong wireless connection and it works fine on other devices. Please help.

zapgrap wrote:
there is no information of locations.
Then no information exists. Use the Report a Problem button within the app to report it.

MeetingPlace Express strange problem !

Similar Messages

Maybe you are looking for