Mega PC - CD and MP3 issue in HiFi

I have recently put together a Mega 651 with an LG 4520B Combo drive.  In HiFi mode the drive is not recognized for either Audio CDs or MP3s, but all functions work great in PC mode.  
I also have a significant sound level difference when I switched to the 6 channel output from the basic 2 channel.  I am running an Altec Lansing 251 5.1 dolby set.  The speaker amp in 2 channel is near minimum and the 6 channel is near max and a significant noise increase is present.
Any comments or suggestions would be welcome.
T

Hello,
yes interesting problem. I recently brought FX 5600 Ultra which required extra power cable for normal function. I messed with cables and when i finnally put my Mega PC in working mode all was fine until i tryed to play audio and mp3 discs.
It just refused to recognize any disc i put inside. I was very angry beacuse everything worked excellent before. Then i opened it again, and noticed that i reversed power cords for DVD-Drive and HDD.
You cant miss it, power cord which must be plugged into cd-dvd drive has small wire(3 or 4 wire together) which must be connected to motherboard.  If you dont do that, than when you are in HiFi mode, drive cant be controlled by motherboard.
What connection between soundcard and speakers are you using?
Are you using onboard audio or you installed audio PCI card (like i did )?
Later
TrojanBarber

Similar Messages

  • Quick Time Take Over and MP3 Issues

    I recently downloaded Quick Time Pro for the purpose of watching online movies. I am no longer able to transfer or play mp3 podcasts except on Quick Time. I can no longer transfer them to my iRiver H300 either. Please let me know how I can tone down this programs aggressive nature?
    Thank you,
    Ports

    Open QT Preferences and go to the Browser Plug-in
    window. Click on MIME Settings and you should be
    able to change the application that is called up to
    play the various multimedia files you encounter.
    Make sure that the only file type checked for QT to
    open is .mov files.
    Thanks for your assistance but I'm still not able to download the MP3 files and have them saved to desktop. Any other thoughts would be appreciated. Note, I have removed the checked or green blocks and all boxes except the Quick Movie boxes which can't be unchecked.
    As soon as I click on the MP3 file it begins to play on Quick time.
    Ports

  • Mega 180 - Hifi mode and MP3 from DVD

    Is it possible to play MP3's in Hifi mode from a DVD? - I know you can from a CD-R but what about a DVD?
    Thanks..
    Neurobrain

    will check that one for you asap .. got dvds loaded with mp3s ... how do you want to hook up your speakers ? Analogue or Digital?

  • Mega 180: MSI DVD Writer DR-16B and other issues...

    I just get hand on a MSI DVD Writer DR-16B and installed it on my Mega PC unfortunatelly whenever i open the tray using the mega pc front panel button it will hang my mega pc badly and i have to reboot.
    However i found a trick: It will not hang if i open the DVD using the Drive button, it is not convenient but at last works...
    Other issue i have with my Mega PC:
    * If i connect my USB bluetooth dongle the mega PC will not boot
    * Sometimes after booting i loose the sound (nvmixer wont load complaining there is no nforce sound chipset on my mega pc !!) and i have to unplug the power for a while to get it back
    * The remote control is crappy unless you can stay 2 meter and aim exactly at the mega pc...anybody found a replacement ??
    * The last one was one of my RAM was corrupted and make my PC crash every days or so and corrupt some of my files on the HD :( :( it took me 3 months to find the problem....
    Do you know if MSI have any plan to fix these issues some days ??? i am getting tired and thinking of replace my Mega PC with some shuttles ....

    Thanks for the advice and here are my reply:
    For DVD i want a 16x DVD writer i already tried several devices out there and this one will be my latest try..i can accomodate to eject with the drive button for now...I was hopping that using a MSI model would make it compatible but this one is not... :(
    For missing sound devices i use the latest nforce drivers and i already found the root cause on this forum, it seems that if you start the PC when the HIFI mode is already open it will lock the sound device in HIFI and the PC mode cannot find it. The solution is to switch off HIFI mode BEFORE going PC mode...well weird
    For USB bluetooth well it would have been nice to leave it all the time because i use it to synch my sony erricson P900 anyway i heard that it is a bios firmware problem so i am back to sync with the phone craddle (USB craddle but this one will not freeze the boot) The USB bluetooth is a PCI GW-BH02U.

  • Mega 865 Pro and Nlite - SCM Issues

    Hello, I have just got a Mega 865 Pro and have installed Windows XP on the system using nlite http://www.nliteos.com to strip windows down to the bare minimum, the boot times are great and it goes in to and out of hibernation is seconds, the problem is that I have stripped out one component that allows the System Control Manager to perform properly, my front LED display stays blank, even if I fire up the Intervideo Hometheatre it does nothing and all the front buttons do not respond. Everything else runs fine though
    Has anyone tried out nlite and does anyone know which component of windows I've removed that I should have left in?
    Thanks
    Niblet

    I'll try installing the new SCM program tonight, though the original ones that came on the disc didn't work (they did on a standard install of XP that I did)
    I'll post my findings later.

  • CBR MP3 and AAC issue for audioqueue

    We are exporting MP3 and AAC files from Logic Pro / Itunes with a constant bit rate - however when we look at these in the terminal they are showing as having a 0 value for the bytes/packet - therefore the SDK is seeing them as VBR files... Here's an example in the terminal:
    File: introduction.mp3
    File type ID: MPG3
    Data format: 2 ch, 44100 Hz, '.mp3' (0x00000000) 0 bits/channel, 0 bytes/packet, 1152 frames/packet, 0 bytes/frame
    no channel layout.
    estimated duration: 246.000 sec
    audio bytes: 4938188
    audio packets: 9452
    bit rate: 160 bits per second
    packet size upper bound: 1052
    maximum packet size: 523
    audio data file offset: 4096
    optimized
    Tried exporting them as AAC and MP3 using both Logic Pro and iTunes but all output files are showing a bytes/packet value.
    Does anyone know how we can ensure that the CBR files have non 0 values for both bytes/packet and frames/packet?

    Here's some more details on the file: Looks like there's a lot of different bit rates in there:
    FO:
    MPEG1 layer 3
    9452 frames
    44100 Hz
    38.281250 frames per second
    246.909388 seconds
    4942284 bytes in file (160.132721 kbps)
    4938188 bytes in MP3 frames (160.000008 kbps) = current bitrate
    36500250 bits of payload data (147.828523 kbps)
    4566717 bytes of payload data (147.964143 kbps)
    33486 bits wasted from partially-full bytes (0.135621 kbps)
    4906989 bytes of MP3 data (158.989143 kbps) = minimum bitrate possible
    31199 bytes of padding (1.010865 kbps)
    4096 bytes outside MP3 frames (0.132713 kbps)
    0 sync errors
    Bitrate distribution:
    160: 5208,4244
    Largest frame uses 6427 bits = 804 bytes = 246.033594 kbps
    Smallest bitrate for CBR is 160

  • Help with mega 865 pro and maxtor sata 6L300S0

    i have a mega 865 pro i just install a new HDD model maxtor sata 6L300S0 300 GB and it is very slow on the mega i contact maxtor and they say i have to verify if i have correct SATA driver installed. but everything looks ok on the system. where i can download that driver again? any one can help me?
    What im doing wrong?

    I'm having the same problem with my Mega 865 pro and my Maxtor 6l200mo (200gb).
    Seems to boot up fine, dosn't take any longer to load up startup items than my old system. Though using pretty much any program results in the system pausing and stuttering for a few seconds. I have noticed it most recenltly when watching video files (mpeg/divx). While i'm watching a video, it will keep pausing at random times.....sometimes every 5 seconds....sometimes every 5 mintues. It does the same when i'm not connected to the internet too, and does the same if I am simply playing mp3s or just on the internet! When it seems to do it most is like now! I have an mpeg playing (300mb) in a window, and while I am browsing the internet and even typing this post, it is pausing for a few seconds which is really frustrating! My old system was pretty similar spec to my current Msi system, though it wasn't a barebones system and was slighty lower spec. That worked flawlessly doing the same tasks so my guess is it must be an Ata problem. Another Mega865 gripe that is bugging me!
    Any help will be much appreciated. Cheers!
    P.s My hd Tach results were pretty much the same as centarlrocks

  • Mega pc 180 and spdif output

    Hallo,
    I have a mega pc 180 and i also have a Logitech® Z-5500 Digital speaker set. There a 2 ways to attach the speakers to the pc.
    1   with 3 cables (front, rear, center and sub)
    2   with spdif.
    I think option 2 with spdif is the best, but I weet it not certain. Who has experience with spdif?
    And does spdif als works in hifi modes?
    And what are the "know" bugs of spdif on the mega pc 180?
    Thanks in advance

    I have a mega 180 and use the optical spdif (also called TOSLINK)  connection for all audio out of my mega. I have it attached to a digitial receiver.  I use it with base windows xp,  MCE 2005, winamp, wmp, 1by 1, windvd, power  dvd, and zoom player. You do have to configure it from several places. The base nvidia sound utility, win dvd, power dvd, and zoom player. 
    I had it set to use the on board soundstorm dolby encoding.. but after a while decided I actually liked it better with just sending digital info directly out in  lpcm format and let the receiver figure out how to decode it. This set up works for me sending dolby sound from dvds and it also works for CD or radio in hifi mode and in fact the dial on the mega does adiust the volume. I actually wish  I could force all audio to be maximum all the time from the meag  and then just control it from my receiver. There are several programs that for some reason want to set the audio level master to around 80 %.

  • Failed Hardware Scan and other issues E440

    Hi all,
    This is probably more rant than anything, but I wanted to give a heads up to others too.
    I have a ThinkPad E440 that is a year old. From the very first time I turned it on, there have been issues. The first hardware scan (via Lenovo Solution Center - LSC) showed a warning for the Intel Dual Band Wireless-AC 7260 Local Connection Test. There were also tons of System Events that always show up in the "Configuration History" part of the LSC. You can look at the calendar and tell exactly which days I used the computer because there will be System Events generated each day. Things like app crashes and failed drivers.
    In July 2014, I got the first warning for the 16 GB SSD - the SMART Short Self-Test. By February this year it showed as failed for each hardware scan (these were initially set up to run monthly).
    Also the whole time I've had it the touch screen would just stop working at some point and I would have to reboot to get it working again.
    I finally called Lenovo on March 30th, before my warranty expired. When I called that time, I didn't realize the hard drive failure was the SSD. So they sent me a new 500 GB drive. I also added the other things into the case when I talked to them. For the wireless issue they suggested making sure the driver was up to date. I did this and let them know when I called back that it was up to date and still having the warning. So I called them to tell them to tell them about the wireless and also that I realized it was the SSD having the failure, not the main drive. The first case had already been closed even though none of the other items were addressed.
    So they opened another case (this is #2). They said to mail them the laptop since the wireless issue would probably be on the board and it wasn't something I could fix myself. They sent a box with a prepaid overnight shipping label. I was very sick for a few days so I sent it back to them on April 10th (a Friday). Via UPS I saw it was delivered on Saturday. Work was performed on it Monday, April 13th and sent back to me that very day. I received it on April 14th. This part of the service has been excellent - very fast response.
    Being in IT, I included a letter with the laptop that outlined the issues that should have been in the case. I also printed the hardware scans and what the system events looked like.
    When I got the laptop back, the sheet inside said they had replaced the Speaker because of Distorted Sound. This was not even on the list even though I had noticed it. I didn't even power up the laptop before calling them again - yes, I was furious! Plus our power was out...
    So this was noon on the 14th. They opened case #3 and sent me ANOTHER BOX so I could send it back.
    After our power came back on the 15th, I powered up my laptop. I opened the browser (I have it set to restore the previous session) and there was a sexually explicit video on YouTube. I opened the other browser and there was a different video on YouTube. So this person was watching YouTube instead of fixing my laptop. I looked through both browser histories and there was quite a bit of activity while my laptop was at the repair center... I ran the hardware scan - still failed and a warning for the wireless. They really hadn't done anything.
    I also found two pictures of the repair person in the recycle bin...
    So I called back. I was LIVID! They opened another case (this is #4). And sent me ANOTHER BOX. I finally learned the other day that once a case is opened, it cannot be edited or added to at all. Instead, they close the other case and open a new one. I guess their turnaround time for closing cases is excellent! I've never seen a system like that - and I've used a lot of them.
    I got a really nice, patient fellow on the line. He took all my info (again). I emailed him the pictures, screen captures of the YouTube videos, the letter I had sent - everything. He entered as much into the new case as he could - he talked to one of the supervisors to make sure he did it right. Somehow he flagged it so that the laptop would get more attention (time) at the repair facility. He also opened a separate case (an escalation ticket?) for a supervisor to call me regarding the person's conduct at the repair facility. He said they would call me that day. (It's now the 25th and I've never heard from anyone)
    So, he sent me ANOTHER BOX. I've built up quite a stack of them.
    Our power was out AGAIN from the 17th through the 19th (don't get me started).
    I noticed a hardware scan had now gotten a failure on the main hard drive. So I called them on the 21st to add this to the case before sending the laptop back. The girl said they can't add anything to an existing case or edit it at all once it's opened. She would have to open a new case and SEND ME ANOTHER BOX. I told her to forget it because I was ready to send it in and didn't want to wait for another box. I also asked for a status on that "escalation case" where the supervisor was supposed to call me. In order to do this she, yes, wait for it, had to open ANOTHER CASE!! So they would know I wanted a status. I'm completely dumbfounded.
    So I sent it back on the 21st. This time I practically wiped it. I had already removed all my files the last time, but I had left my bookmarks and browser history intact.  I set up a guest logon with admin privileges. I updated my letter and printed off more stuff to include with the box. On one sheet I had only the case number, the serial number and machine type. On another sheet I had "DO NOT SEPARATE THIS PAPERWORK FROM THE LAPTOP" and the case number. I put this sheet on top (The guy on the 15th said my letter and stuff may have gotten separated from the laptop once it was delivered to the repair facility). I used a ton of staples so it would all stay together. I included in my letter the failure on the main hard drive and asked if they could look at it. I wrote about having to open a new case if I wanted to include it.
    They received it on the 22nd. A nice gentleman from the repair facility called me that day asking about the password. that. was. written. on the sheet they have you fill out. I told him what happened last time and also mentioned the hard drive failure and asked if he could look into it. He said they would.
    I received my laptop back yesterday morning.The sheet that came with it said they had "replaced the following parts to complete the repair of your laptop."
    Part Description                                           Symptom
    IMAGE                                                             Replaced due to engineering change
    System board                                                 Network card error
    Hard disk drive                                                Network card error
    ECA-WIRELESS                                            <no symptom listed>
    There was also a sheet saying they had installed a factory preload of software and I needed to install Lenovo and Windows updates.
    When I booted it up, the first thing I noticed, in the lower right corner was:
    Windows 8.1
    SecureBoot isn’t configured correctly
    Build 9600
    I ran a hardware scan. Well, I tried. It stopped part way through and said it finished successfully but most of the tasks showed up as cancelled. I tried to run it again - issues - rebooting ensued. It said the LSC wasn’t available and that I should try again or reboot.
    Tried several times. Then got what I guess is the new BSOD - kinder, gentler:
    Your PC ran into a problem and needs to restart. We're just
    collecting some error info, and then we'll restart for you. (xx% complete)
    If you'd like to know more, you can search online later for this error: DRIVER_CORRUPTED_EXPOOL
    Even though the LSC said my Lenovo files were all up to date, I ran the Update. And first I had to download a new version of Update. Then I downloaded all of the Lenovo updates and installed them (there were quite a few). The BIOS update failed. While I was doing the Lenovo downloads, I got a light blue screen but no text (I was out of the room so I'm not sure what happened). Did CTRL-ALT-DEL and it shows only IE and Task Manager as applications that are running. Could not “Switch to” IE. Hitting window key to go to start didn't do anything. So I had to restart.
    By 3pm yesterday there were 34 system events in the configuration history.
    I ran the hardware scan again after I updated the Lenovo files, and you guessed it! Failure on the SSD (SMART Short Self-Test) and warning on the wireless. Nothing had changed. Except hardware scan is acting different than it did before I sent in the laptop for repairs. When it finishes, it instantly closes and just shows 100% complete. When I click on "see last results" it shows a screen called
    Log Information,
    Canceled 04/24/2015 n:nn pm 
    You have not done a hardware test on your computer
    And the calendar in LSC only shows the very first hardware scan I did on Friday. Even the hardware scan screen shows the date and time of the last scan. It also shows the error code. In order to see exactly what is failing, I have to sit there and watch it very closely and snap a picture of the screen as soon as the error (or warning) shows up.
    When I would try to run Windows update, it would hang up PC Settings. I couldn't even kill it using task manager because it didn't show up as a task. During this, I got a flag saying the firewall wasn't turned on. I tried to turn it on, but clicking on Turn on Windows Firewall didn't do anything. I tried to setup my Microsoft account but that just hung too.
    I ended up running Windows Update FOUR TIMES to get all the updates installed. Every time I ran it, it said "Done!" and I would run it again and more would show up. The last time was this morning.
    At some point, the error about SecureBoot went away.
    Then, I created a bootable BIOS update disk. Following the ReadMe instructions, I went through ThinkPad Setup and verified several values. Of note:
    Secure Boot was DISABLED. According to the ReadMe file, this should be ENABLED in Windows 8.1. I enabled it.
    Under Startup/Boot, according to the ReadMe that came with the BIOS update, UEFI/Legacy Boot is supposed to be set at UEFI Only for Windows 8.1. Mine was set to "Both". I changed it.
    In Startup, OS Optimized Defaults was DISABLED, even though it says right there (and in the BIOS update ReadMe) it should be ENABLED to meet Microsoft Windows 8 Certification Requirement.
    After these updates, I flashed the new BIOS.
    Then, I ran hardware scan again...
    Now I have TWO failures on the SSD: Random Seek Test and SMART Short Self-Test. Great.
    In the Event Viewer (that I recently discovered), it says my disk has a bad block. It just says The device, \Device\Harddisk\DR1, has a bad block. I assume this is the SSD...
    There are 867 events in the event viewer - Critical, Error, and Warning...
    Fifty-two of these are from October 7, 2013 - before my little laptop was a glimmer.
    The rest are from when Lenovo had it and yesterday and today.
    64 of them are the disk error.
    341 are from DeviceSetupManager. 65 of those are from failed driver installs. 69 are for not being able to establish a connection to the windows update service. 64 are from not being able to establish a connection to the Windows Metadata and Internet Services (WMIS).
    3 times it's rebooted without cleanly shutting down
    60 of them are from Service Control Manager and say The TDKLIB service failed to start due to the following error: The system cannot find the file specified.
    One of them says {Registry Hive Recovered} Registry hive (file): '\??\C:\Users\Default\NTUSER.DAT' was corrupted and it has been recovered. Some data might have been lost.
    16 are warnings that various processors in Group 0 are being limited by system firmware.
    12 say the certificate for local system with thumbprint <bunch of hex numbers> is about to expire or already expired.
    108 are warnings for failure to load the driver \Driver\WUDFRd for various devices
    16 are application errors
    One is for the computer rebooting from a "bug check"
    15 are for name resolutions timing out after none of the configured DNS servers responded.
    10 are for SecureBoot being disabled.
    14 for services terminating unexpectedly
    15 are for WLAN Extensibility Module has stopped
    61 are for applications not being able to be restarted because the application SID does not match Conductor SID
    12 are for activation of CLSID timing out waiting for the service wuauserv to stop
    So, I'll call them on Monday and open. a. new. case (#5?) - but really 7. And get A NEW BOX.
    I'll keep you updated!

    Hi amycdero and welcome to the HP Forum,
    I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
    In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
    This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
    I hope this information is helpful. Please let me know.
    Thank you,
    I worked on behalf of HP.

  • Battery, heat, and ringer issues

    I recently purchased the Iphone 4s.. this is my first iphone
    I did the update that Apple sent out to help the battery and it seems like it worse then before the update??  My phone has been off the charger for 45 minutes, I sent 1 text message, and had 1 phone call.  The percentage is now at 87.  It the last 2 minutes i have watched it go down 2%?  Is this normal?  Also, the phone gets REALLY hot...
    If not, what do I do now??
    Also, I keep missing phone calls because I don't hear the phone ring... but the ringer is all the way up..
    Any help will be greatly appreciated!!

    mdorling wrote:
    We've got the same issues, the BBM contacts went, now the BB won't charge ... we've tried all ways to get it to charge ... typically it's just over a month old so we can't get a full refund ... we are on here trying to find out what we need to do as we can't obtain a telephone number for BB customer services nor an email address only a tweet address which I haven't downloaded onto my handset.  So am stuck!!! Any and all advice very gratefully received as seriously peeved with BB models now.  My first BB was fantastic ... but all newer models have had problems ... think BB needs to ensure that all techy problems are fully ironed out prior to launching their new BB handset!
    1. Connect your Z10 to the wall outlet charger for an hour and then with the Z10 powered on, and with it STILL CONNECTED, remove the battery for a minute and replace. This will normally reset the the on-device battery meter and allow the charging status and percentage to show more correctly.
    2. Orange is your tech support contact and any issue which they cannot resolve, they should escalate up to BlackBerry tier two tech support, or you should ask/demand that.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • New Airport Extreme and iPhone Issues

    I've had the networking day from ****. I previously had a 3rd Gen Time Capsule at our restaurant, connected to a Cisco 26port gigabit POE switch and Comcast digital voice and internet. Over the past few days, employees have reported trouble accessing the the Wifi network. After several restarts and firmware upgrades (including the dreaded "firmware problem" to fine update), nothing worked. I changed channels, back to auto, back to specific channels, back to auto. Made open guest networks. Nothing worked consistently. My iPhone might connect and my friend's might not. Nor his laptop consistently. Our Axis network cameras might take a bit extra time to connect. All quite random and quite frustrating.
    So I swap out an older Airport Extreme (4th gen I believe) using the same configuration as the TC (Time Capsule). It works fine, except for the last port not working as expected. No matter, I plug the mac mini into the Cisco switch and off we go. Nevertheless, I'm still told we are suffering random Wifi issues. So I buy a brand new AE (5th gen) today to replace that one. Should work like a charm I thought. Right....    
    Several hours later, I finally have the new AE working, but only after doing several hard resets/factory restores, the works. For some reason, the mac mini could not successfully update any of the connected AEs - whether connected directly into the same AE, or if the Mini was connected to the switch. Nothing worked. Every time I tried to update the AE, it would hang and force me to unplug and plug it back in. It would also never save setting changes. I finally resorted to a friend's macbook to be able to restore it successfully. And once that worked, the mini was able to update the AE flawlessly. Our Point of Sales (POS) machines connect fine, our cameras connect fine, wifi printer connects, and the mini connects, and everything has internet.
    Except my iPhone 5. Of course. It gets a signal fine (full bars). It gets an IP address. But I can't surf the web. Or download email. Or iMessages. Anything. No internet access. I try hard restarts on my iphone. I try assigning IP addresses by MAC address. I try resetting the AE. I try renaming the WiFi name. Nothing. I can make a guest network that works (on a different IP table, btw - 172, not 192.) But other than that, no access. Grrrr.
    So I have a "working" AE router where some devices successfully connect (through wifi and ethernet) and some dont' (wifi iPhone). My iPhone connects fine to my home TC. So shouldn't be anything to do with that. But I'm at a loss. I'm going to go back and restore everything and power cycle everything tonight or tomorrow night. I don't know if that will help, but it's worth a try. Lord knows it feels like I've tried everything else.
    Anyone have any good ideas of where to start besides voodoo dolls and baseball bats?

    I took mine back, because I was having these very same issues. We use contivity too. I was able to connect only to one of three of the servers we manage (in Europe). I couldn't connect to the servers in Asia or here in the USA.
    Replaced the Airport Extreme with my trusty old d-link 624, and no issues connecting to any of the three hubs.
    Otherwise, I liked the Airport Extreme, and I'll consider buying it again when and if they address this VPN issue. I work at home so its obviously a "deal breaker" for me.

  • IQ826t Restart and Heating Issue

    One thing I definitely do not like the HP's support especially when they will not allow us to buy a 7 Upgrade from Vista nor will they support something (even when I find their glitches and they admit after telling me it was just the OS).. On Repair work, I had to ship it out and this will be my 2-3 time to do repair on this PC in the past 3 years (and I have to wait a week for the repair to be done...)
    Besides that, IQ826t, Win 7 Ultimate SP1
    All Drivers are up to date with HP website (utilizing Win 7 64 bit drivers and Firmware is up to date). AVG update/scan (no issue - confirmed even rootkit).. Malwarebyte - Scan and no issue
    Disk Cleanup, Disk Defragmentation done on a monthly and quarterly schedule
    Biggest Issue:
    I am getting a crash with Win 7 0x124 Stop Error Message (happens periodically and even after a reboot)
    Never had this issue until May and the upgrade to Win 7 was done last year with SP1 update done on March (so it is not an issue with the OS as HP support personnel seems to think... I proved them the issue with Windows Update History, The  Bluescreen error code on my error code reader)..  This machine under warranty and I had issues with it constant (even in Vista)
    They state that it is the OS.. Again, if that was the case, I would think it would happen right away like my Toshiba on SP1 upgrade... That was not the case in the matter.  I have a firmware reset (default settings) and the issue persist..
    The Error Code relates always HAL.dll or ntoskrnl.exe
    One if hardware compatiblity and the other is an OS kernel exe file.. And this usually checking knowledge base relates to hardware failing due to 1) Compatibility (which HP website confirms is not the case) 2) OS corruption (which is not the case checking on safe mode and this happening STILL 3) Heat Issue (which I believe is the issue and was been documented on the Internet
    What I am noticing is the unit is extremely HOT (vent is almost burning when it has been off and just turned on).. I wonder if the hardware pieces are literally melting to destruction since I can't just open it up (they state it will void my warranty)
    The Symptoms before the Crash (happens any time.. Even right after a power up)
    If you are playing audio or video, you will start to hear jitters and sound seems to echo itself .. Video would start to lag and become choppy..  Systems start to slow down and things seem to run very slow.. I have seen the power light on the PC start on but the touchscreen just go black (will not restart sometimes)..
    Minor Issues (but could be related)
    1) When running PC Hardware Diagnostic, they will come up with an error code in the past and that was warranted for a motherboard replacement (of course, they ship the box to the wrong location and I was in the middle of my wedding so I get to it now).. It was pertaining to PCI Express Status ICH9 PCI Express Root Port  where it will generate an error code... Now, running the diagnostic... I will not get any error but PCI Express Root Port 3 & 5 do not show up on the diagnostic... Wouldn't that obvious show something that is a problem when there are 6 ports (which on the previous diagnostic that I can't grab past logs shows that). That is not warranted for a warranty work? Just a note, I got the fail test code (which was intermittent but keep happening and the tech support would not look at previous case.. Port 4 failed and a fatal device code)
    2) Blu-Ray player will not run and their answer is that it is your Blu-Ray until they realize that I ran it on 3 different Blu-Ray player standalone, different Blu-Ray, and confirm DVD will work.. They still think it is a software issue until they can't deny my point when it will not read the Blu-Ray no matter what (they took control and confirmed it).. They believe the HP SmartDVD software was failing because of Win 7 and not Vista (even when I downgrade and confirm it works, I stated the software is the issue...  Lone and behold, 2 months later they had an update that they refuse to admit I was RIGHT on the matter and done 15 hours of troubleshooting that they were wrong about)
    3) Wireless Keyboard and Mouse lost connectivity even if the battery is not low... Just stop typing or omit letters.. This is considering the keyboard is literally in front of the touchscreen
    4) Touchscreen is sensitive when it wants to be but won't in other... Constant issues there
    This is why I have so much issue with support.. They seem to show that they will do anything to deny the issue.. Heck, I am a computer technian calling on the issue.. It ain't like I didn't troubleshoot on the matter... But they think we are all morons and when I prove them wrong, they will use any excuse to honor warranty... That is why it is amazing..

    Look in your Settings > App Manager.
    Tap Device Monitor.
    Tap the Battery tab.
    At the upper right, tap "Since Last Charge" to change to "Last 48 Hours".
    What apps or processes are consuming the most battery power?
    ALSO, in setting up your new Z30, are you syncing many contacts or calendar data from a connected email account?
    Social accounts such as Facebook or Twitter?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Just updated to IOS 7 and two issues:  First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services".

    Just updated to IOS 7 and two issues: 
    First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services".  I'm not sure what this really means...
    The second issue is when I try to select "Manually Manage Music"
         The iPhone "My iPhone" is synced with another iTunes libary on "MY-PC".  Do you want to erase this iPhone and sync with this iTunes library?  An iPhone can be synced with only one iTunes library at a time.  Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
    So... I don't want to do that, but I do what to be able to Manage my music.  I'm not sure what it means by being synced to another iTunes unless it means to an older version of itunes?
    Anyone have any ideas?

    I cannot address the sync services error right now, but the error that you receive when you change from sync to manually manage music is what happens when you change. Once you change to manually manage music, it erases all of the music and will only put the music that you want on the phone, content that you manually drag over to it. See if this support document helps you out. http://support.apple.com/kb/HT1535

  • PO number and material issued against this PO for subcontracting

    How to know the link in between the PO number and material issued against this PO for subcontracting.
    I have checked that PO history is not getting updated.
    Thanks,

    Hi,
    We have 2 different scenarios where you can post a goods issue to Subcontract Venodrs.
    Scenarios 1: You can post the goods issue against a subcontrac vendor with out referencing the Subcon PO from ME2O, at this stage we will be knowing what is the stock at subcontract vendor but we will not be knowing the issues against which and how much Quantities are posted.
    So when we are post goods receipt, then we will come to know the consuption quantities.
    Scenario: 2, If we use the delivery concept then we can track the goods issues against the subcon POs.
    If you really keen to track the material issued to Subcon vendor against a PO so better use with delivery.
    Thansk,
    Satya.

  • I have 2 iphones syncing on one computer and on the same apple ID. Before i updatad my Itunes to the last available update and my Iphones to 5.01 i had no problem draging jpg. and mp3 files into my iphones DCIM folder (the picture folder that opens when c

    I have 2 iphones syncing on one computer and on the same apple ID.
    Before i updatad my Itunes to the last available update and my Iphones to 5.01
    i had no problem draging jpg. and mp3 files into my iphones DCIM folder (the picture folder that opens
    when conecting to Itunes). Since my updates Itune wont let me drag and drop any files' even pictures that
    were taken with my Iphone on 4.3.3.
    Please help as we have no itunes music in Israel, only apps and i cant copy any of my old music from my computer
    to my iphones.
    If it helps, i am using a pc with 32 bit windows 7.
    Other from the obove Itunes works fine and does sync pictures from my computer to my Iphone from "my pictures" folder.
    Thank you for your time
    Yoni Bliss
    [email protected]

    The title of my initial post is a bit misleading. I already took a chance deleting one of the iPhones, hoping if I deleted the wrong one, I can still reauthorize it (all with the same Apple ID acct, so not subject to 90-day waiting period, right?) The iTunes database just updated itself, and it says I have 4 "devices" "in the Cloud", but 5 "computers" associated w my account. How can I find out what computers are associated? Isn't there a list I can see? I dont have a clue what computers they might be. If I use the  "Deauthorize All" option, is it a pain to add them all back in. I assume I would have to log in from each computer to reauthorize each one. Would I have to be running the newest OS or version of iTunes to reauthorize? I think I have a PowerBook G4 Titanium with an older OS and iTunes. I'd like to keep that authorized, if possible.

Maybe you are looking for

  • Can no longer get album artwork

    Just got a new iPhone and wanted album artwork for all the songs I have loaded. Last night I found that some of the older songs I had loaded in my library had no album listed, so I would just find the correct album name, add it into the "Get Info" se

  • How can I get the functionality of the old "Spaces" in Mission Control?

    How can I make Lion show a space number on the top of the screen so I can see which space I am in? How can I make Lion switch spaces in a ring? ie? 1, 2, 3, 4, 5, 6, 1, 2, 3,  ... How can I make lion switch directly to a numbered space?  ie: 1, 4, 5,

  • BI Pattern Role Missing!?

    Hi, In the Front-end design guidlines document for 2004s the BI Pattern Wizard Section mentions that the reuseable Web Items are available in role SAP_BW_PATTERN_OBJECTS. I can't find this role in the system and it doesn't show up in Business Content

  • Com.bea.bpm.papiws.OperationException_Exception: Invalid comparator

    Hi, I am using my studio papi wsdl - http://localhost:8585/papiws/PapiWebServiceEndpoint?wsdl, and using interface PapiWebService i am trying to abort the instances for a particular process with a filter condition i.e. customer id as '111000' I am ge

  • 100501 : non - ORACLE exception

    When i am trying to open a file using text IO, application is giving 100501 : non - ORACLE exception. The opening of file is written withing a BEGIN EXCEPTION END statement with when others exception. But the cursor is jumping to the outher EXCEPTION