MEIS - MEssage 'No data selected' after changes in VEFU

Dear Gurus,
While doing the Intrastat reporting, we have the Statistical value as 0 in some of the documents.
The client's requirement is to populate a value in this field.
So, they are trying to use the Transaction VEFU to insert a statistical value for such PO's.
But, after doing this, when we go back to the transaction MEIS & regenerate the report in update mode (Using Log Type B) , it gives the message 'No data selected for this time period'.
Can anyone please suggest the reason for this & how to resolve this?
Thanks
Ritu

Hi all,
I found a very strange behaviour when reversing Account Maintenance Document.
After posting Account Maintenance using MR11. I used ME23N to view the Account Maintenance document and double click it to get to MR11SHOW. Here I reversed the document. But if i execute MR11 again it prompts out the error "No data selected".
Another scenario is to use execute MR11SHOW directly and reverse the Account Maintenance document. Here I am about to use MR11 to post the document again....
It seems the behaviour for reversing is different by using ME23N and MR11SHOW, which is weird...

Similar Messages

F.27 get message no data selected

When running F.27 , there is "no data selected". though we have configured sap13 correspondence. and maintained peridic statement in customer master data. also maintained variant for porgram RFKORD11. Is thera anythign i am missing? Do I need to maintain anythign in the variant that probably I am mising. all i entered is comoany code, correspondence sap13, form id

Hello,
Prerequisites:
1. Correspondence form assignment to the program RFKORD10 in the transaction OB96
2. Assign indicator in customer master data
Mention Company code, Account type, indicator in the master data, key date for account statement, correspondence(SAP06) & execute F.27 it will work out.
Regards,
Venkat

Data deleted after changing ID names

Hi,
I have been having some issues with replacing ID's. Basically, we will sometimes created a temp ID for forecasting, and then replace it with a permanent one when ID has been created in SAP.
So the issue is that, sometimes, not always, when I am replacing an ID, and after I validate and process the dimension, all the data associated with that ID will be lost. So basically, I process first without a full process and wait for the new IDs to replace the old IDs on the spreadsheet, then I perform a full process.
I have also, only performed a full process and the issue was still present. Again, this seems to be sporadic and I am not sure what I am doing to cause this.
When changing the ID name, I am putting the new ID in the "New ID" property.
Also, we are on BPC 5.1
Thank you

Dear Chris,
You're right, I was have the same issue. When you put the new ID on property "NEW ID", the data will be transfer into the new ID and will be clear in the old ID.
Thanks,
Wandi Sutandi
Edited by: wandi sutandi on Mar 25, 2009 12:56 PM

Got this problem with backing up my new iPhone 5 from my other IPhone 4 data. After changing to my new IPhone 5 I haven't backed up my old IPhone in almost a year. Now I want to sync all the data of the old phone and I can't do neither backups. Help!!!!!

Every time I started to at least restore the little data left on the very last update I made in the old phone at Itune It continualy kept trying to restore and at the end a message will appear saying that an error had occurred and restore was unable to complete. Please I need help on this. I got over 2,000 songs in the old phone and I don't want to loose them. Thanks!

Hello DebbieRNPR,
I'd suggest looking over the following articles, as they should be of some use in your endeavor to back up your old iPhone, then restore its content to the new iPhone.
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/TS2529
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
Cheers,
Allen

Vacation Messages Don't Work After Changing Password

I have a Snow Leopard Server (10.6.2) setup and the vacation message feature works fine as long as the user hasn't changed their password. Once they have changed their password then the feature doesn't work. You can set it up but it doesn't work, when you send an email to the user with the message set the email sends but you don't get the vacation message.
I have also noticed that when you try and load the server side mail rules for a user that has changed their password you get an error (from memory it's something about can't get info from server).
Does anyone know why this might happen.
Thanks

There is a one-response-per-day limit imposed by mailsieve and dovecot. Once a vacation response has been sent to any address, it'll throttle any future responses for 24 hours to the same address.
Once you change the password, are you either using the same address to send e-mail as before? Have you tried triggering the vacation notice from a different sender address?
A.

PAPI-WS data outdated after changes thru Process Administrator

Hi.
We have a strange problem. We are making changes in roles and participants using the Process Administrator. Then we have a development that uses PAPI-WS to access that info. But only if we restart the enterprise server we manage to see those updates to roles and participants thru the PAPI-WS. It seems that the PAPI-WS has a cache that is not updated nor refreshed.
Any clues ? Can we force the cache refresh ?
We are using Oracle BPM 10.3
Thanks !
Best regards,
Matias.

Hi Matias,
PAPI-WS is a PAPI wrapper that exposes PAPI functionality through webservices.
So, what I told you for PAPI also applies to PAPI-WS.
Another PAPI (and also PAPI-WS) characteristic is that it doesn't refresh the roles of a participant while it is logged in. If you want to refresh your roles, you have to close your session and log in again. (like in the workspace)
But... there is a single thing in PAPI-WS that PAPI does not have. That's the session pool.
PAPI-WS has a session pool so as to avoid opening and closing sessions on every single request.
So, in PAPI-WS you don't control explicitly the session log out. That's why the "participantCurrent" roles may not get updated.
The good thing is that PAPI-WS session pool can be configured in papiws.properties.
There is an interesting property "fuego.papiws.pool.timeout" that specify the session timeout (in minutes).
The default value is 5 minutes.
# Session timeout in minutes.
# Related to the length of the interval between calls from the same user.
fuego.papiws.pool.timeout=5
May be you can do reduce that timeout to 1 minute and make the following sequence.
1) Execute the participantCurrent webservice
2) Assign a new role to a participant from the process administrator
3) Execute the participantCurrent webservice (this time, it will show an outdated info)
4) Wait one minute plus some seconds (the timer has low precision)
5) Execute the participantCurrent webservice (this time, it should show the updated info)
Hope this helps,
Ariel

Terminating BlackBerry data charges after changing phones

I've bought a new, non-BlackBerry phone to replace my busted pay-as-you-go Curve 9300, and I'm wondering how to prevent the next £5 data charge being taken from my mobile credit by BB, as occurs every 30 days. Obviously I won't be requiring BB's data services any longer, so how do I "unsubscribe" from this? I don't want to end up still paying for something I'm not using, on top of the data costs for my new non-BB phone.
Apologies if this sounds like a stupid question, but for me the whole concept of paying BlackBerry/RIM for data usage (rather than my network provider, Three UK) has been a bewildering culture shock from day one. Any signposting towards the obvious will be much appreciated!

Hello,
What is indeed bewildering is that you pay anything for your normal services directly to BlackBerry...I have never before heard of that. To my understanding to this point, all billing issues (except for app purchases via BBWorld) are a matter directly between the end user and the mobile service provider...BlackBerry is not at all involved in that "front end" transaction (they will of course have a contract on the "back end" with the carrier which certainly involves some sort of payment from the carrier to BlackBerry). I have never before heard of any payments that are made directly to BlackBerry by any end user. Very strange.
In any event, your formal support procedure would be the method of dealing with this. Which starts with you ringing up 3 and first seeing if they can resolve it...and, if not, then requesting formal escalation (channels for which only they have) up to BlackBerry for enhanced support.
For additional details, please see this "sticky" post, along with the threads to which it links, for helpful information to guide you as you proceed:
http://supportforums.blackberry.com/t5/Social-Lounge/How-This-Site-and-Formal-Support-Work/td-p/2540...
Hopefully, this information will be of use to you.
Cheers, and Good Luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Advance payment/No data selected????

Hi,
I am trying to print advance payment invoice, but aftre creating all the docs, I am prevented to print the transaction, as the system gives the message'NO DATA SELECTED", when I populate the Sales Doc Number.
Please give your input and assist me on this issue.Ever gratefull.
AN

Hi AN
As you want to print the advance payment invoice then first of all check in the output type the Transmission Medium you maintained and the Payer / sold to party (SP) you assigned (PY)
Secondly also check wheather you have maintained condition record or not
If the system is giving message as NO DATA SELECTED , then check the output type details
Go to VF02->header data->output type and there click on the tab Determine Analysis , so that you can know where the problem is
In the same way Go to VA02->header data->output type and there click on the tab Determine Analysis , so that you can know where the problem is
For further information kindly check the configuration of the downpayment
[https://forums.sdn.sap.com/post!reply.jspa?messageID=5084683&useDraft=true]
Regards
Srinath

Issue with printing production order after changes through CO02

Hi,
Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
Regards,
Shiva

Hi Shiva,
Refer SAP note 28887.
Source: http://www.sapfans.com/forums/viewtopic.php?f=9&t=308577
Please search /google before posting queries.
Regards,
SuryaD.

Insert Execute InfoPackage - no data selected

We had upgraded the BW3.5 to BI7.0 two
months ago.
Now in QA system, I couldn't insert any
InfoPackage from the Process Type
'Execute InfoPackage'. The warning
message 'No data selected' occured.

Hi Amol,
This is a known issue and it is solved by implementing the below note:
1062704 - P15:PC: InfoPackage input help does not display any values
Hope so the issue will be solved.
Please assign points.
Cheers
Rajesh

Parameterized Data Selection in Scheduler Infopackage in BW

hei...is there any way that i can parameterized the data selection in the scheduler infopackage? When i wanna load the data from the scheduler, the data selection will change based on the source systems. Let say today got data in the source system, then the scheduler can auto select today's date to load the data, if let say next monday 25th of feb got data, then the scheduler will auto select the date 25th of feb and load the data from the source system to BW.
thanks...

Hi,
Not sure I understood this fully.
For each source system there would be 1 infoapckage as it is created on the datasource.
Now for your requirement you can write a routine inside the infoapckage to load the data for the current data.
Bye
Dinesh

Out message triggering after changing delivary date.

Hi,
we created new out put for purchase order mail,mail is going to vendor,its working fine.
now our requirement is purchaser change the delivery date in purchase order ,once again new output type triggering ,is their way to stop output after changing the delivery date.
thanks
vijay kumar.

Hi,
you can configure the system to trigger an output only when certain fields are changed.
Config Path:
Materials Management->Purchasing->Messages->Fields Relevant to Printouts of Changes.
Hope it may help you.
Kuber

After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.

After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

"Get Variants" button disabled after error message in AT SELECTION SCREEN

Hi,
In "AT SELECTION SCREEN" I throw an error message if certain criteria return no data.
After the error message is thrown, the button for choosing variants no longer appears to work. I click it and the variant selection box doesn't come up. It just changes the values that have been populated from red to black.
What is the code that remedies this? If an error is thrown, it should allow you to select a variant still.
Thanks,
Kevin

"AT SELECTION SCREEN" is not an option here. Let me clarify.
In START-OF-SELECTION, I call another program with a SUBMIT statement. That program uses a logical database. So it makes no sense to move this to "AT SELECTION SCREEN". Even when I did that, I still couldn't solve this problem.
If the SUBMIT statement returns no data (if sy-subrc = '4') then I need to go back to the initial screen. I need to display some kind of message, of type I or E or S, I don't care.
It just needs to go back to the selection screen and VARIANTS need to WORK, and you need to be able to SAVE the variants.
For some reason, if I get no data with the SUBMIT statement, I can display a message and get back to the selection screen but variants do not work. I've tried EXIT, STOP, CALL SELECTION SCREEN 1000 (the only one in the program), END LIST-PROCESSING, etc. NOTHING WORKS!

When connected to my Ford Mondeo, my ipod nano can be controlled through interface. But after while it comes up with message 'loading data' and then freezes. Anyone else got the issue?

When connected to my new Ford Mondeo, my ipod nano can be controlled through user interface in car. This worksd most of the time, but after a while if I try to change the music or search, it comes up with message 'Loading Data'. I then have to pull out USB and reinseert, at which point it works again. Has anyone esle expereinced this/have a solution?

Does not matter if anyone else has this issue. You need to contact the Ford dealership. It's their product you are having problems with.
If you really want to know if anyone else has this issue, post on Ford's Mondeo message boards. It's where the Ford car owners hang out.

MEIS - MEssage 'No data selected' after changes in VEFU

Similar Messages

Maybe you are looking for