Melodyne plugin - how to configure logic for using it?

Currently, to use Melodyne to pitch-and-time modify an audio track, I send the output of a mono audio track to my audio interface, then bring it back in to a melodyne plug-in track where melodyne can record and do its magic. Is there a way of doing this internally, so the audio interface is not involved?
Thanks

keystrike wrote:
Thank you. Just to be sure what is supposed to happen, does the audio get written over by new values?
The Melodyne Plugin actually "records" new audio filesfor that section that you "Transfer" and when playing back the audio signal on that track just get re-routed to that Melodyne audio fle. You can set the location and you should keep an eye on those audio file. They are part of your Project assets and needed for your Project to play.
The original files are not touched and still there. You can bypass the Melodyne files anytime.
Make sure to read the manual and understand the concept and mechanisms. Otherwise, you could end up with broken links and lots of lost work. Also keep in mind that some features like solo and mute behave differently due to the "audio file routing" in the background.
Once you are on top those "housekeeping" things, you can dive into this amazing tool.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Similar Messages

How to configure WSDP for use in IDE like Netbeans

Hello,
I have two questions about WSDP integration in IDE like Netbeans:
1)
I have a problem compiling the WSDP tutorial examples inside Netbeans.
I believe the problem is that Netbeans doesn't know about the ${jwsdp.home} attribute in the build files.
It's the same when trying to compile it with the Jakarta ANT release and not the one coming with WSDP.
I'd prefer to add some kind of property to Netbean's ANT executor, but how?
Second option would be to use the WSDP ANT in Netbeans instead, but I don't know how to, either.
I can't believe that Sun only made it working with the included ANT but I can't find the {jwsdp.home} declaration anywhere although I think it's part of the classpath argument of the WSDP ant script.
2)
Is it possible to integrate the WSDP Tomcat into Netbeans? I tried "Server Registry->Installed Servers->Tomcat 4.0->Add Server" but had problems starting it. Maybe because the version is different?
Anyway, the included one might do.
But how to install a different Server type? I'm thinking about Sun ONE App Server 7 in order to configure it for J2EE Applications.
I think it will utilize the "New Module" wizard. Can someone please describe in short how to? Or even point me to a document?
Many thanks
Carsten

Ok, I solved it.
Problem was about custom task definitions in ANT.
As I understand it, it's necessary to provide a <classpath> for each unknown custom taskdef class in order to refer the class. This was not correct in the WSDP tutorial build.xml files.
The ANT documentation provides at "IDE integration" helpful links to that issue.
BTW, my second question about integrating App Servers into Netbeans is still open.
I think it utilizes the Netbeans Server Plugin API but how do I recognize a valid module file?
Carsten

How can configure weblogic for use Hibernate

Hello everybody, my question is how can I configureit weblogic for use hibernate.
I'm using JDeveloper 11g but I did not show any error when I run my jsp page, the page shows me all, but it is as if it never made the connection. the data of my table are empty.
Thanks for your answers.

thanks for answer. The jar was wrong, now I get not error, but also does not show me anything on my board ADF. seems to not connect. this is what I get in your log JDeveloper:
C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m
WLS Start Mode=Development
CLASSPATH=;C:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.0.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.5/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\Middleware\jdeveloper\modules\features\adf.share_11.1.1.jar;;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;;
PATH=C:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\patch_cie660\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.5\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Archivos de programa\Intel\DMIX;C:\Archivos de programa\Java\jdk1.6.0\bin;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_05"
Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
Java HotSpot(TM) Client VM (build 10.0-b19, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -Xmx512m -Djbo.34010=false -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Ddomain.home=C:\Oracle\MIDDLE~1\JDEVEL~1\system\SYSTEM~1.88\DEFAUL~1 -Doracle.home=C:\Oracle\Middleware\jdeveloper -Doracle.security.jps.config=C:\Oracle\MIDDLE~1\JDEVEL~1\system\SYSTEM~1.88\DEFAUL~1\config\oracle\jps-config.xml -Doracle.dms.context=OFF -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sysext_manifest_classpath -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
<06-02-2009 10:50:27 AM VET> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\antlr-2.7.6.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\asm.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\cglib-2.1.3.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\commons-collections-3.2.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\commons-logging-1.0.4.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\dom4j-1.6.1.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\hibernate3.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\jdom.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\jta.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\jtds-1.2.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\log4j-1.2.14.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\mysql-connector-java-3.1.7-bin.jar;C:\Oracle\Middleware\patch_wls1030\profiles\default\sysext_manifest_classpath\weblogic_ext_patch.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_TW.jar>
<06-02-2009 10:50:28 AM VET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 10.0-b19 from Sun Microsystems Inc.>
<06-02-2009 10:50:28 AM VET> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for CR380042 Thu Sep 11 13:33:40 PDT 2008
WebLogic Server Temporary Patch for 7372756 Fri Sep 12 17:05:44 EDT 2008
WebLogic Server Temporary Patch for CR381265 Wed Oct 08 10:15:58 PDT 2008
WebLogic Server Temporary Patch for CR380913 Wed Oct 15 13:24:22 PDT 2008
WebLogic Server Temporary Patch for CR381739 Tue Oct 21 14:06:14 IST 2008
WebLogic Server 10.3 Mon Aug 18 22:39:18 EDT 2008 1142987 >
<06-02-2009 10:50:29 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<06-02-2009 10:50:29 AM VET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<06-02-2009 10:50:29 AM VET> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<06-02-2009 10:50:32 AM VET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<06-02-2009 10:50:36 AM VET> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at 'C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddi.war'.>
<06-02-2009 10:50:36 AM VET> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at 'C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddiexplorer.war'.>
<06-02-2009 10:50:37 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<06-02-2009 10:50:37 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<06-02-2009 10:50:38 AM VET> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<06-02-2009 10:50:38 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<06-02-2009 10:50:38 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<06-02-2009 10:50:38 AM VET> <Warning> <Server> <BEA-002611> <Hostname "FAMILIA_KAWAIDA.mshome.net", maps to multiple IP addresses: 10.0.0.1, 201.222.105.26, 127.0.0.1>
<06-02-2009 10:50:38 AM VET> <Warning> <Server> <BEA-002611> <Hostname "FAMILIA_KAWAIDA", maps to multiple IP addresses: 10.0.0.1, 201.222.105.26, 127.0.0.1>
<06-02-2009 10:50:38 AM VET> <Warning> <Server> <BEA-002611> <Hostname "localhost", maps to multiple IP addresses: 10.0.0.1, 201.222.105.26, 127.0.0.1>
<06-02-2009 10:50:38 AM VET> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<06-02-2009 10:50:38 AM VET> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 201.222.105.26:7101 for protocols iiop, t3, ldap, snmp, http.>
<06-02-2009 10:50:38 AM VET> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<06-02-2009 10:50:38 AM VET> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<06-02-2009 10:50:38 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<06-02-2009 10:50:38 AM VET> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
DefaultServer startup time: 16953 ms.
DefaultServer started.
[Running application TVB on Server Instance DefaultServer...]
---- Deployment started. ---- Feb 6, 2009 10:50:43 AM
Target platform is (Weblogic 10.3).
Running dependency analysis...
2009-02-06 10:50:43.64: Writing WAR file to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\TVB\TVB-TVB-webapp
2009-02-06 10:50:43.687: Wrote WAR file to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\TVB\TVB-TVB-webapp
2009-02-06 10:50:43.906: Writing EAR file to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\TVB
2009-02-06 10:50:43.921: Wrote EAR file to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\TVB
Deploying Application...
<06-02-2009 10:50:47 AM VET> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application TVB is not versioned.>
06-02-2009 10:50:47 AM oracle.adf.share.config.ADFConfigFactory cleanUpApplicationState
INFO: Cleaning up application state
ADF Library non-OC4J post-deployment (millis): 16
06-02-2009 10:51:08 AM oracle.adfinternal.view.faces.partition.FeatureUtils _addFeatures
ADVERTENCIA: A duplicate definition for the feature "AdfDvtGraph" has been found at zip:C:/Oracle/Middleware/jdeveloper/system/system11.1.1.0.31.51.88/DefaultDomain/servers/DefaultServer/tmp/_WL_user/TVB/6mq9lg/war/WEB-INF/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 3. A feature with the same name was originally defined at zip:C:/Oracle/Middleware/jdeveloper/dvt/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 3. This may indicate that multiple copies of the same jar file are present on the class path. Ignoring the new feature definition.
06-02-2009 10:51:08 AM oracle.adfinternal.view.faces.partition.FeatureUtils _addFeatures
ADVERTENCIA: A duplicate definition for the feature "AdfDvtGauge" has been found at zip:C:/Oracle/Middleware/jdeveloper/system/system11.1.1.0.31.51.88/DefaultDomain/servers/DefaultServer/tmp/_WL_user/TVB/6mq9lg/war/WEB-INF/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 7. A feature with the same name was originally defined at zip:C:/Oracle/Middleware/jdeveloper/dvt/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 7. This may indicate that multiple copies of the same jar file are present on the class path. Ignoring the new feature definition.
06-02-2009 10:51:08 AM oracle.adfinternal.view.faces.partition.FeatureUtils _addFeatures
ADVERTENCIA: A duplicate definition for the feature "AdfRichPivotTable" has been found at zip:C:/Oracle/Middleware/jdeveloper/system/system11.1.1.0.31.51.88/DefaultDomain/servers/DefaultServer/tmp/_WL_user/TVB/6mq9lg/war/WEB-INF/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 11. A feature with the same name was originally defined at zip:C:/Oracle/Middleware/jdeveloper/dvt/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 11. This may indicate that multiple copies of the same jar file are present on the class path. Ignoring the new feature definition.
Application Deployed Successfully.
Elapsed time for deployment: 26 seconds
---- Deployment finished. ---- Feb 6, 2009 10:51:09 AM
Run startup time: 26766 ms.
[Application TVB deployed to Server Instance DefaultServer]
Target URL -- http://127.0.0.1:7101/TVB-TVB-context-root/faces/seguridad/grupo.jspx
06-02-2009 10:51:17 AM oracle.adfinternal.controller.faces.lifecycle.JSFLifecycleImpl setLifecycleContextBuilder
ADVERTENCIA: ADFc: Sustituyendo la implementación del ciclo de vida de la página de ADF por 'oracle.adfinternal.controller.application.model.JSFDataBindingLifecycleContextBuilder'.
06-02-2009 10:51:17 AM oracle.as.jmx.framework.PortableMBeanFactory setJMXFrameworkProviderClass
INFO: Marco portátil JMX inicializado con el SPI de plataforma "class oracle.as.jmx.framework.wls.spi.JMXFrameworkProviderImpl"
06-02-2009 10:51:17 AM oracle.adfinternal.controller.util.model.AdfmInterface initialize
INFO: ADFc: BindingContext está presente, utilizando las API de ADFm para DataControlFrames.
06-02-2009 10:51:17 AM oracle.adfinternal.controller.metadata.provider.MdsMetadataResourceProvider <init>
INFO: ADFc: Almacenamiento de recursos de metadatos de MDS en la caché del controlador ACTIVADO.
06-02-2009 10:51:17 AM oracle.adf.controller.internal.metadata.MetadataService$Bootstrap add
INFO: ADFc: Cargando metadatos de inicialización de '/WEB-INF/adfc-config.xml'.
thanks in advance for your response.

How to configure ex90 for use with polycom resource manager GAB

My customer has a Polycom infrastructure, including using Resource Manager for the GAB server. I also have several Cisco endpoints deployed (EX90 and C40) and I need to get these units configured to use the GAB. Polycom documentation sucks and only says:
1. At the endpoint, enter the information required for directory set up including the Polycom Global Address Book/RealPresence Resource Manager system IP address and the path.
For example, http://<RPRM_IP_ADDRESS>/TMS/Public/external/phonebook/PhoneBookService.asmx.
To do this on Cisco endpoints, go to System Configuration> Phone Book Server.
2. Wait for the connections to take effect
When I go to the EX90 phone book server setup page, I only have ID, Type and URL fields. The type field has a drop down that only has Cisco options available (VCS, TMS, Callway and CUCM)
No matter what combination I use, I haven't been able to get the EX90 to pickup the Polycom directory.
Any suggestions? Thanks

What happens when you try that URL (http://<RPRM_IP_ADDRESS>/TMS/Public/external/phonebook/PhoneBookService.asmx) from a Web Browser - do you see anything, or get an error?
You'll need to make sure that's accessible first before trying to configure your endpoints to use it.

How to configure router to use ip pool on the aaa server for vpn clients

how to configure router to use ip pool on the aaa server for vpn clients . i want to use vpn clients to connect to the router. authenticate using the aaa server username databse and also use the ip pool cretaed on the aaa server. i am not able to find the command on the router pointing to use the pool created on the aaa server. can u some one help me with this command.
sebastan

Hello Sebastan,
what do you use as AAA server (e.g. ACS with TACACS+ or RADIUS) ?
Regards,
GNT

How to configure Firefox to use OpenVPN?

summary: I'm running OpenVPN from a Debian client through a Debian jumpbox/server. After I [start the server, start the client] most IP-based applications (DNS, ping, ssh) seem to work from the client, but client's Firefox cannot connect to http://www.whatismyip.com/ (or any other URI). How to configure Firefox to use the VPN? or otherwise fix the problem? or further debug it?
details:
I have a laptop running debian_version==jessie/sid with Firefox version=33.0 which needs to access a compute cluster. The cluster formerly required only an SSL VPN (enabled by a Firefox plugin) to access, but now has several additional requirements, which I seek to satisfy by running the SSL VPN through a jumpbox running an OpenVPN server. The jumpbox is running a "vanilla" Debian 7.7.
I have been using the laptop successfully for a few years without network problems. Currently I have the laptop connected by wire directly to an ISP-supplied modem/router. With `openvpn` NOT running on the laptop, I see:
* `ifconfig` shows no entry='tun0' (just "the usual" entries for 'eth0', 'lo', 'wlan0'), and shows the expected client IP# bound to 'eth0'.
* I can `ping` my jumpbox/server using its real IP#, but cannot `ping 10.8.0.1`
* I can `ssh` to my jumpbox/server using its real IP#, but cannot `ssh 10.8.0.1`
* `nslookup www.whatismyip.com` gives correct results
* browsing to http://www.whatismyip.com/ shows my client's IP# (as also shown in `ifconfig`)
Both my client/laptop and server/jumpbox setups are quite generic OpenVPN-wise, and are almost exactly as described on the Debian wiki
https://wiki.debian.org/openvpn%20for%20server%20and%20client
me@jumpbox:~$ date ; cat /etc/openvpn/server.conf
Sat Nov 8 16:49:00 EST 2014
port 1194
proto udp
dev tun
ca /etc/openvpn/ca.crt
cert /etc/openvpn/server.crt
key /etc/openvpn/server.key
dh /etc/openvpn/dh1024.pem
server 10.8.0.0 255.255.255.0
ifconfig-pool-persist ipp.txt
push "redirect-gateway def1 bypass-dhcp"
push "dhcp-option DNS 8.8.8.8" # google public DNS
keepalive 10 120
comp-lzo
user nobody
group nogroup
persist-key
persist-tun
status openvpn-status.log
verb 3
me@laptop:~$ date ; cat /etc/openvpn/client1.conf
Sat Nov 8 16:51:31 EST 2014
client
dev tun
proto udp
remote ser.ver.IP.num 1194
resolv-retry infinite
nobind
user nobody
group nogroup
persist-key
persist-tun
mute-replay-warnings
ca /etc/openvpn/ca.crt
cert /etc/openvpn/client1.crt
key /etc/openvpn/client1.key
ns-cert-type server
comp-lzo
verb 3
up /etc/openvpn/update-resolv-conf
down /etc/openvpn/update-resolv-conf
My jumpbox/server firewall is currently set to forward everything, using `iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE`:
me@jumpbox:~$ date ; sudo iptables -L
Sat Nov 8 16:42:06 EST 2014
Chain INPUT (policy ACCEPT)
target prot opt source destination
fail2ban-ssh tcp -- anywhere anywhere multiport dports ssh
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Chain fail2ban-ssh (1 references)
target prot opt source destination
RETURN all -- anywhere anywhere
After I start `openvpn` on first the server and then the client, I see no OpenVPN errors on either the server or the client:
me@jumpbox:~$ sudo openvpn --script-security 2 --config /etc/openvpn/server.conf &
Sat Nov 8 17:48:25 2014 OpenVPN 2.2.1 x86_64-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [eurephia] [MH] [PF_INET6] [IPv6 payload 20110424-2 (2.2RC2)] built on Jun 18 2013
Sat Nov 8 17:48:25 2014 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Sat Nov 8 17:48:25 2014 Diffie-Hellman initialized with 1024 bit key
Sat Nov 8 17:48:25 2014 TLS-Auth MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
Sat Nov 8 17:48:25 2014 Socket Buffers: R=[212992->131072] S=[212992->131072]
Sat Nov 8 17:48:25 2014 ROUTE default_gateway=ser.ver.gate.way
Sat Nov 8 17:48:25 2014 TUN/TAP device tun0 opened
Sat Nov 8 17:48:25 2014 TUN/TAP TX queue length set to 100
Sat Nov 8 17:48:25 2014 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Sat Nov 8 17:48:25 2014 /sbin/ifconfig tun0 10.8.0.1 pointopoint 10.8.0.2 mtu 1500
Sat Nov 8 17:48:25 2014 /sbin/route add -net 10.8.0.0 netmask 255.255.255.0 gw 10.8.0.2
Sat Nov 8 17:48:25 2014 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
Sat Nov 8 17:48:25 2014 GID set to nogroup
Sat Nov 8 17:48:25 2014 UID set to nobody
Sat Nov 8 17:48:25 2014 UDPv4 link local (bound): [undef]
Sat Nov 8 17:48:25 2014 UDPv4 link remote: [undef]
Sat Nov 8 17:48:25 2014 MULTI: multi_init called, r=256 v=256
Sat Nov 8 17:48:25 2014 IFCONFIG POOL: base=10.8.0.4 size=62, ipv6=0
Sat Nov 8 17:48:25 2014 ifconfig_pool_read(), in='TomRoche,10.8.0.4', TODO: IPv6
Sat Nov 8 17:48:25 2014 succeeded -> ifconfig_pool_set()
Sat Nov 8 17:48:25 2014 IFCONFIG POOL LIST
Sat Nov 8 17:48:25 2014 TomRoche,10.8.0.4
Sat Nov 8 17:48:25 2014 Initialization Sequence Completed
me@laptop:~$ sudo openvpn --script-security 2 --config /etc/openvpn/client1.conf &
Sat Nov 8 17:49:12 2014 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Sat Nov 8 17:49:12 2014 Socket Buffers: R=[212992->131072] S=[212992->131072]
Sat Nov 8 17:49:12 2014 NOTE: UID/GID downgrade will be delayed because of --client, --pull, or --up-delay
Sat Nov 8 17:49:12 2014 UDPv4 link local: [undef]
Sat Nov 8 17:49:12 2014 UDPv4 link remote: [AF_INET]jump.box.IP.num:1194
Sat Nov 8 17:49:12 2014 TLS: Initial packet from [AF_INET]jump.box.IP.num:1194, sid=25df7af6 0ece4089
Sat Nov 8 17:49:13 2014 VERIFY OK: depth=1, <my config data/>
Sat Nov 8 17:49:13 2014 VERIFY OK: nsCertType=SERVER
Sat Nov 8 17:49:13 2014 VERIFY OK: depth=0, <my config data/>
Sat Nov 8 17:49:14 2014 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key
Sat Nov 8 17:49:14 2014 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Sat Nov 8 17:49:14 2014 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key
Sat Nov 8 17:49:14 2014 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Sat Nov 8 17:49:14 2014 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA
Sat Nov 8 17:49:14 2014 [TomRoche] Peer Connection Initiated with [AF_INET]jump.box.IP.num:1194
Sat Nov 8 17:49:16 2014 SENT CONTROL [TomRoche]: 'PUSH_REQUEST' (status=1)
Sat Nov 8 17:49:16 2014 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,dhcp-option DNS 8.8.8.8,route 10.8.0.1,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5'
Sat Nov 8 17:49:16 2014 OPTIONS IMPORT: timers and/or timeouts modified
Sat Nov 8 17:49:16 2014 OPTIONS IMPORT: --ifconfig/up options modified
Sat Nov 8 17:49:16 2014 OPTIONS IMPORT: route options modified
Sat Nov 8 17:49:16 2014 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified
Sat Nov 8 17:49:16 2014 ROUTE_GATEWAY lap.top.gate.way/255.255.255.0 IFACE=eth0 HWADDR=la:pt:op:MAC:ad:dr
Sat Nov 8 17:49:16 2014 TUN/TAP device tun0 opened
Sat Nov 8 17:49:16 2014 TUN/TAP TX queue length set to 100
Sat Nov 8 17:49:16 2014 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Sat Nov 8 17:49:16 2014 /sbin/ip link set dev tun0 up mtu 1500
Sat Nov 8 17:49:16 2014 /sbin/ip addr add dev tun0 local 10.8.0.6 peer 10.8.0.5
Sat Nov 8 17:49:16 2014 /etc/openvpn/update-resolv-conf tun0 1500 1542 10.8.0.6 10.8.0.5 init
dhcp-option DNS 8.8.8.8
Sat Nov 8 17:49:16 2014 /sbin/ip route add lap.top.IP.num/32 via lap.top.gate.way
Sat Nov 8 17:49:16 2014 /sbin/ip route add 0.0.0.0/1 via 10.8.0.5
Sat Nov 8 17:49:16 2014 /sbin/ip route add 128.0.0.0/1 via 10.8.0.5
Sat Nov 8 17:49:16 2014 /sbin/ip route add 10.8.0.1/32 via 10.8.0.5
Sat Nov 8 17:49:16 2014 GID set to nogroup
Sat Nov 8 17:49:16 2014 UID set to nobody
Sat Nov 8 17:49:16 2014 Initialization Sequence Completed
I then see the following on my client:
* `ifconfig` shows a new entry=`tun0`, which looks correct
* I can `ping` the server using either its real IP# or `10.8.0.1`
* I can `ssh` to the server using either its real IP# or `10.8.0.1`
* `nslookup www.whatismyip.com` gives correct results
... but I get no connection if I open a new instance of Firefox and browse to http://www.whatismyip.com/ :-( "Looking up www.whatismyip.com..." succeeds quickly but the status line continues to display "Connecting to www.whatismyip.com..." until the attempt times out. I also get the same behavior (connection timeout) if I open a new instance of Chrome, or if I browse to http://www.whatismyip.com/ with a Firefox opened prior to starting OpenVPN. FWIW I get the same behavior browsing to any URI, including (e.g.) Google.
This is a major problem for me! For the SSL VPN to work, I need to start a Firefox and run it (since the SSL VPN's vendor only supports it on Linux via a Firefox plugin) to access a particular remote-access website. Furthermore I need the SSL VPN to run through the jumpbox/OpenVPN. (Don't ask, it's a long, sad story ...)
Is there something I must do to configure Firefox to use the VPN? Or is there some other way to fix this?
Alternatively, what should I do to further debug the problem? It just seems odd to me that the other services work (e.g., `nslookup`, `ssh`) but Firefox does not. That being said, both Firefox and Chrome fail in this usecase, so the problem might be generic to web browsers.
your assistance is appreciated, Tom Roche <[email protected]>

You're kidding. You have to go through that rigamarole just to put your bookmarks on your own server? Where's the simple FTP option?
Also, the above-linked article has a broken link. The link to the weaveserver (which is what you have to set up on your own server) is no good, and there is no obvious replacement. There are plenty of Weave-related repositories here:
http://hg.mozilla.org/labs
but it's not clear what you need.

How to configure sendmail to use multiple LDAP servers ?

Hi everybody!
I have a sendmail running on Solaris 10 and a LDAP server(192.168.1.9) also running Solaris 10 OS. I have configured the sendmail the following way:
bash-3.00# ldapclient list
NS_LDAP_FILE_VERSION= 2.0
NS_LDAP_BINDDN= cn=proxyagent,ou=profile,dc=email,dc=reso,dc=ru
NS_LDAP_BINDPASSWD= {NS1}*********************
NS_LDAP_SERVERS= 192.168.1.9
NS_LDAP_SEARCH_BASEDN= dc=email,dc=domain,dc=ru
NS_LDAP_AUTH= simple
NS_LDAP_SEARCH_REF= FALSE
NS_LDAP_SEARCH_SCOPE= sub
NS_LDAP_SEARCH_TIME= 30
NS_LDAP_CACHETTL= 43200
NS_LDAP_PROFILE= default
NS_LDAP_CREDENTIAL_LEVEL= proxy
NS_LDAP_BIND_TIME= 10
I also have another LDAP server (IP 192.168.1.10). It is configured as a replicant of the 192.168.1.9 LDAP server.
The question is how can i configure sendmail to use both LDAP servers ?
The man pages explain how to configure ldapclient to use ONE server and what if want to use two or more? All the settings and the profiles the same.
Thanks in advance =))

Hi!
To add LDAP servers to the Solaris ldapclient, you might use the ldapclient command:
ldapclient manual -v -a defaultServerList="servera.yourdomain.com serverb.yourdomain.com"
But this is only failover, AFAIK the Solaris ldapclient does not perform loadbalancing by itself.
But I am not sure about your sendmail programm. Normally, sendmail has its own configuration
and can be configured to use LDAP e.g. for aliases etc.
Regards!
Rainer

How to configure SMTP for iCloud?

I have never used the Mail program on my macs. I started using Eudora in 1995 and when Mail came along some years later, i didn't take to it, it didn't have the functionality i needed and enjoyed. Fast forward to a couple days ago, my Snow Leopard MacBook is wearing out and i got a new MacBook Pro running Mountain Lion. When i was setting up the new computer, i thought iCloud would be configured automatically. It wasn't because i have a couple of different Apple IDs but i think that is straightened out now and i'm signed in using the me.com email address and have my calendars and contacts syncing with iphone and my other computer. Mail is working, but only for my me.com email address which i rarely use. I mainly use a gmail address.
I don't want to use Mail and i don't want mail to be downloaded to it. That happened on my other computur, so that i had tens of thousands of messages in a program i never open and don't use. So i somehow turned it off so it no longer gets the mail from my other accounts. i don't want to receive email in Mail. But because i can't use Eudora in Mountain Lion, i need a new email client. Today, i downloaded and installed Mail Mate, i want to try it out. When I tried to use Mail mate to send an email i got a message saying "No SMTP server configured for iCloud." i googled how to configure SMTP for iCloud and what i found said it configures automatically. So i don't know what to do. I went to ICloud in system preferences and i don't see anything i can do there.
Is there anything i can get it to do to configure automatically? All my software is up to date, if that makes a difference.

i was persistently googling search terms for this problem and came across a link that gave information to the effect that for non Apple email clients, SMTP has to be configured manually, and the settings were provided. I entered them into Mail Mate and now it works. So thankfully, this problem is solved.

How to configure rescheduling for sale order quantities

kindly explain how to configure rescheduling for sale order quantities that are created last month. kindly explain. i am in urgent.
regards,
g.v.shivakkumar

Hi,
Short text
Rescheduling sales and stock transfer documents: by material
Description
The 'Rescheduling' program (SDV03V02) processes sales document items that are contained in the item directory for the material. It takes into consideration open items and schedule lines from stock transfer items, stock transfer scheduling agreements and purchase order requests (items only), referred to hereafter as stock transfer documents, for the materials.
All sales documents for the material that are still open are selected. This means that the material index must be activated for at least all sales document types, whose items may have requirements. All stock transfer documents or items for the material that are still open are also selected. Open in this case means for example, that there is no deletion indicator, that the item from a stock transfer purchase order request cannot be labeled as completed or that the quantity delivered and posted to goods issue for the item in a stock transfer purchase order is the same as the amount ordered. An availability check can only be carried out if a checking rule is assigned to the document type - if this is not the case, the document or document item is not checked.
Checking rule 'A' is used as a basis for rescheduling sales orders (exceptions to this are rush orders they use checking rule B, and orders with individual customer stock; they use checking rule AE). Stock transfer documents use the checking rule that is assigned in Customizing for Purchasing. It is important that the scope of checks is consistent for both the stock transfer documents and the sales documents and that they do not exclude each other, as this can lead to incorrect test results. An example of an incorrect setting would be: The scope of check for checking rule 'A' checks delivery schedules for stock transfer purchase orders and stock transfer purchase requests, however the scope of check for the checking rule for the stock transport scheduling agreement does not.
The items and schedule lines found in the selection are sorted according to 'Priorities' - document category, delivery priority, creation date of the item or schedule line (for stock transfer purchase orders and delivery plans) entered on the selection screen or according to the schedule line date of the earliest schedule line with order quantity, document number and item number and then transferred to the availability check. Priority 1 is highest priority and priority 5 the lowest. Stock transfer purchase order requests are sorted after stock transfer purchase orders and scheduling agreements, as they are less binding. This means that when you have identical sort criteria such as delivery dates, the stock transfer purchase order item is checked first and then the item from the stock transfer purchase order request.
The preset option 'Unconfirmed documents required' only carries out rescheduling for materials for which there is at least one unconfirmed transaction.
You can use the parameters 'Sorting criteria delivery date' to define whether sorting is carried out with the order quantity after the creation date of the item or the delivery date of the earliest schedule line.
If you mark the 'Simulation' field, the checked documents are not saved. Instead a results list is generated and saved. However, the availability check for the corresponding documents continues as if saving has taken place already, that is, that the simulated list corresponds to the actual one.
Under 'Options' on the selection screen, specify whether sales documents and/or stock transfer documents should be processed. For stock transfer documents you can enter whether stock transfer purchase orders and scheduling agreements should be processed at item or schedule line level:
Processing at item level:
All open schedule lines for the item are read and collected, then transferred to the availability check. To sort and prioritize documents, you do not need each individual schedule line. It is sufficient to have the item or data from the first schedule line. All open schedule lines for the item are processed and checked.
Example of processing at item level:
Sorting: Date (Delivery date first schedule line) - Document number - Document item
Doc. cat. Doc. number Doc. item Doc. schedule line Delivery date PO        4500000012      10               0001              26.01. PO        4500000012      10               0002              26.02. PO        4500000025      20               0001              28.01. PO        4500000025      20               0002              02.02.
You can see that the second schedule line for document 4500000025/20 from 02.02 was processed after the second schedule line for document 4500000012/10 from 26.02. This is because all open schedule lines for an item are read and processed. The first schedule line from 4500000012/10 has the earliest delivery date, therefore it has priority.
Processing at schedule line level:
Each open schedule line for an item is entered in document sorting in accordance with the values entered under 'Priorities'. The availability check is carried out for each individual schedule line.
Example for processing at schedule line level:
Sorting: Date (delivery date first schedule line) - document number -document item
Doc. cat.    Doc. number Doc. item Doc. sched. line Del. date PO           4500000012    10             0001           26.01. PO           4500000025    20             0001           28.01. PO           4500000025    20             0002           02.02. PO           4500000012    10             0002           26.02.
Here you can see that each schedule line was sorted according to its delivery date. Note that this type of processing requires more runtime due to the individual checks and more frequent saving.
The results of rescheduling are saved, as long as the program was not started in simulation mode. When calling up from the 'Sales' area menu or when directly starting via the development environment, the iniator is informed via a dialog box that he has just started a process that changes data. He can then decide whether or not he wants to continue.
Checking procedure for stock transfer documents:
An availability check of stock transfer documents in rescheduling is carried out in accordance with the check carried out when manually creating a document. If, however, the required quantity for a schedule line is not available on a particular date and will not be ready until later, new schedule lines are created for the stock transfer purchase orders and scheduling agreements, containing the relevant data. New items are created in this case for stock transfer purchase order requirements. The total sum of schedule line quantities for a processed schedule line corresponds to the schedule line quantity of the original schedule line.
First example: Using a stock transfer purchase order item with a schedule line:
a) Status of item before rescheduling run:
Del. date PO quantity   Confirmed quant Confirmed del. date 23.07.      50 items       0 items              -
==> This now affects the stock/requirement situation:
    - Goods issue is posted for the material in the delivering plant on the 23.07.
    - A purchase order of 10 items was created for the material in the delivering plant. Delivery is expected on the 29.07.
b) Status of stock transfer purchase order item after rescheduling run:
Del. date PO quantity   Confirmed quant   Confirmed del. date 23.07.     40 items      40 items            23.07. 29.07.     10 items      10 items            29.07.
==> The first schedule line was changed in accordance with the results of the rescheduling availability check. Only 40 of the 50 original items could be delivered on the 23.07. Therefore, a new schedule line is created for the rest on the 29.07. for 10 confirmed items.
Second example: Same output situation as the above example.
==> There is now a change in the requirement/stock situation:
A purchase order for 10 items is created for the material in the delivering plant. Delivery is expected on the 29.07. A further purchase shows another 40 planned items on the 30.07.
   Status of stock transfer purchase order item after rescheduling run:
Del. date PO quantity Confirmed quant Confirmed del. date 29.07.     10 items       10 items          29.07. 30.07.     40 items       40 items          30.07.
==> The first schedule line was changed in accordance with the result of the availability check for rescheduling. The original delivery date is set to the date confirmed in the ATP check. A new schedule line is created for the remaining 40 items, that are available on the 30.07.
Note:
Any set fixed delivery date and quantity indicators and creation indicators for schedule lines or items are 'inherited' by newly created schedule lines. Assuming that the original schedule line was fixed in the above example (since it is created manually), this indicator is also set for the newly created schedule line.
If shipping scheduling is activated for a stock transfer document type, this is also implemented for newly created schedule lines, with the exception of route schedule determination. This means that in the current version of the program no route schedule has been determined for a schedule line containing a route schedule for which new schedule lines may need to be created.
The results of the run are issued in the form of a list, which is also saved, so that the results can be controlled at a later date. This is done using the function 'Evaluate rescheduling', but it is only a good idea to do this after the first rescheduling has taken place. You can restrict selection requirements but these can however affect the runtime. You can use this function to analyze the saved list until the next rescheduling run, which writes over the result. If you start rescheduling in the background, a spool file with the result list referred to will be created in the corresponding setting. You can see this in spool management.
Output
A list of changed documents, a list of documents in which an error occurred during processing and as a result were not changed, can be called up via the menu 'Edit - Error log'. If in a subsequent evaluation a restricted selection is carried out, a note appears at the end of the list to say that not all document items are displayed.
You can set the scope of the list under the menu option 'List' in the list display. You can view improvements, deteriorations and the whole list. Before the documents can be included in one or either of the restricted lists, the date or quantity has to have changed so that the item can be contained in both the list of improved or deteriorated documents.
You can use the interface for changing transactions and the order list to navigate. Use 'Back' to exit the list and 'New selection' to return to the selection screen.
Recommendation
You should only start this program occasionally and use very restricted selectin criteria during working hours as it requires enormous system resources.
Note
The columns for 'New date' and 'New confirmed qty' only contain entries if the dates or quantities have changed.
As the system only runs the change check (dates/quantities) per line in the original list, an item whose backlog has increased in the list of improvements. This occurs, for example, if the whole quantity can be delivered at once but at a later date. In this situation, the system determines an increase for the line when it compares quantities.
Regards,
Amrish Purohit

How to configure ActiveSync for a database table in IdM 7.0

Hi All,
Please suggest me the steps to configure ActiveSync in IdM 7.0.
when i try it by resource-->activeSync wizard it gives
"The ActiveSync Wizard has been deprecated in Identity Manager 7.0 in favor of using MetaView and the resource action "Edit Synchronization Policy". "
how to configure ActiveSync for a database table.
Thanx
Shant

Hi,
You need to a script and run it on os level. Here is an example:-
emcli relocate_targets -src_agent=agentmachine1.domain:3872
-dest_agent=agentmachine2.domain:3872 -target_name=RACDB
-target_type=oracle_database -copy_from_src -force=yes
-changed_param=MachineName:agentmachine2.domain
Regards
Jomon
Edited by: JohnJomon on Nov 17, 2011 2:27 PM

How to configure wokflow for MRP generated & manually created PR

Dear Gurus,
I have to customize SAP workflow for releasing Purchase requisitions. I will be using enhancement M06B0001 for my own role resolution.
I have some questions regarding workflow
1) How to configure workflow for MRP generated & manually created PR?What are the steps? what are the limitations in doing so?
2) Since we are facing the problem of insufficient user license ,How to send notifications to NON SAP users?(We have thought of creating a Z table for the same)
Looking forward to your reply,
Thanks in advance,
Best regards
Tushar
SAP MM Consultant

Dear Mike,
Thanks for your reply, & sorry for not responding on time.
Here are my constraints:
1) Not a single component of HR module will be implemented.(Project management decision:-()
2) Number of user licenses are less, considering the workflow users.(Hence we have thought of creating Z table for employee nos. & EMAIL IDs ,& this table will be accessed by using M06B0001 user exit.(It is still in development phase. Truely speaking, dont know whether it will work or not).If this works out ,then I believe, record from SU01 will not be used (Please correct me here).
3)We have 2 instances on development server.(in short,2 separate installations on same server by creating additional instance). What are the implications of this particular system landscape on workflow? Whether workflow will work or not??:-(, :-(.
The reason I asked you 3rd question is , As soon as 2 nd instance was created on development server, Short Dumps are coming while running transactions of Workflow builder.(SWDD & PFTC).It is giving error" Table is unknown or does not exist". Description of error says"The current program"SAPLSWF3 had to be terminated because one of the statements could not be executed."
"An SAP Open SQL Statement contains a table that does not exist in the database or is not listed in the ABAP Data dictionary.The Table is "SWF_WFPDSC" or another table is accessed in the statement.
Program=SAPLSWF3
Include=LSWF3U05
Row=22
Module name=SWF_WFP_REPOSITORY_CONTENT_GET
The same dump is coming while accessing SWF_WFPVW table from SE16.
Request to Mike & all of you, help me in this regard.
Thanks in Advance,
Regards,
Tushar

How to configure Ogone for working with business catalyst ?

How to configure Ogone for working with business catalyst ?
In france ogone seems to be the only solution for seamless payment and there's no explications on the forum to configure it.
Thx for your answers

Hi ,
[Configuration Guide SAP adapter for SAP Quality Center by HP|https://websmp101.sap-ag.de/~sapdownload/011000358700000612662007E/Adapter_Configuration_.pdf] might be useful.
Check [Master guide|https://websmp201.sap-ag.de/~sapdownload/011000358700000612672007E/Adapter_Master_Guide.pdf] also.
Regards
Naveen
Edited by: Naveen kumar Palanichamy on Feb 19, 2009 6:38 AM

How to Configure alert for process failures

Hi Friends.
How to Configure alert for process failures due to any reasons like mapping, runtime exceptions .
I am devloping one scenario which is file to flatfile. In this scenario I am also using mail adapter for sending mail daily to admin that tells about record size and no of records parallely. I am not using BPM in this scenario.
I am having very little experience in XI.
Please answer this with clear steps so that I can do it.

hi,
check the links below for all the details and help on configuring alerts
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9418d690-0201-0010-85bb-e9b2c1af895b - How to setup alerts for monitoring in XI 3.0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/003de490-0201-0010-68a4-bf7a1e1fd3a5 - Monitoring in XI 3.0
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - XI: Alerts configuration - Step by step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - XI: Alerts - Troubleshooting guide
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi

Plugins & sampltank not showing up for use?

Hi there, I am still having trouble with plugins, can anyone help?
Firstly, after installing and ensuring the AU ones are installed, my plugins do not show up for use in channels etc. they work perfectly in both Bias & ProTools though.
i) I downloaded the waves demos for a 14 day trial and Logic doesn't find them, do I have to do something manually for them to be noticed?
ii) Sampletank2 does not show up either (AU installed). I downloaded the free version and it DOES show up.
Argh...
G

OK, last I checked the Waves passed Validation (I am not a Waves owner) so the demo version may be older-if you are considering purchasing them make sure you get all answers about AU Validation from Waves.
Another thing: Logic Pro comes with a great suite of Plugins. You may want to consider that alternative if you were thinking of buying Waves.
What do you mean it should have happened at startup? It should have validated or they should have passed validation?
Cheers, J

Configurations necessary for using EDI.

Dear All,
Kindly Give some light on configurations necessary for using EDI. I mean What is the use of EDI, How to use, what are the steps involve in that...
Regards
San Rao.

Dear San,
EDI (Electronic Data Interchange) The transmitting of documents from one computer application to another computer application using a standardized format.
Why implement EDI?
Improves data accuracy: You can eliminate the need to re-enter data from paper documents and thus prevent potential data entry errors. It is estimated to be one-tenth the cost of handling its paper equivalent.
Reduces technical complexity: With EDI, companies use standardized data formats to exchange documents. EDI allows companies using different systems to achieve computer-to-computer electronic exchange of business documents.
Lowers personnel needs: EDI can help companies reduce the need for personnel involved in paper business transaction processing.
Accelerates information exchange: The lead time between start and completion of order processing is greatly reduced. By timeous scheduling companies can plan production more accurately and thus reduce stock inventories.
EDI technologies have evolved as a data carrier replacing the paper document. It is not a new concept or a new practice. EDI has existed for more than 2 decades in Europe and North America.
Early electronic interchanges used proprietary formats agreed upon between two trading partners requiring new programs each time a new partner was added to the existing system. Lateron some industry groups began a cooperative effort to develop industry EDI standards for purchasing, transportation, and financial applications. Many of these standards supported only intra-industry trading, which led to a large number of EDI formats.
In 1979, the Accredited Standards Committee (ASC) X12 was formed to develop a generic EDI standard. In 1993, Version 3, Release 4 contained 192 standards. There are over 100 additional standards in development. In the U.S., the most commonly used standard is ANSI X12, coordinated by the American National Standards Institute (ANSI). While in Europe, it is the Electronic Data Interchange for Administration, Commerce, and Transportation (EDIFACT) standard. SAP maps it message types by EDIFACT naming conventions
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

Melodyne plugin - how to configure logic for using it?

Similar Messages

Maybe you are looking for