Memory Management Error in Windows 8.1

please check dumpfile in this url related to memory management error in windows 8.1. This error usually occurs when i open window media player....thanks
https://skydrive.live.com/redir?resid=99B960292878F11C%21148

These crashes were related to memory management (probably caused by a driver).
Please run these tests to verify your memory and find which driver is causing the problem.
If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you don't
know what it is you probably are not overclocking.
1-Memtest. (You can read more about running memtest here)
2-Driver verifier (for complete directions see our wiki here)
Co-Authored by JMH3143
Wanikiya and Dyami--Team Zigzag

Similar Messages

Attempting to insert a schema-invalid doc gives 'memory manager' error

Hi
I can successfully insert schema-valid XML documents into my BDB XML database by adding the appropriate xsi:schemaLocation elements to the document root element. However, when I intentionally remove a mandatory element from the document in order to make it invalid, for testing purposes, I receive (actually, trap) the following error message:
"Exception code 0."
"Error: nsToUTF8: no memory manager File: NsUtil.cpp Line: 159"
whereas I would expect to see a message relating to validation errors. Looking at the source file NsUtil.cpp I can see that the code is trying to use a memory manager to deallocate some memory. I don't know how this relates to document validation and I'm not about to go fiddling with this particular piece of code!
So, has anyone else encountered a similar problem, or at least have an idea as to what's going on here?
We're using BDB XML 2.3.10 on Linux. And we're accessing BDB using the python interface. My code looks like this (with some bits removed for clarity):
stream = mgr.createLocalFileInputStream(filename)
doc.setContentAsXmlInputStream(stream)
docValue = XmlValue(doc)
cntnr.putDocument(txn, doc, uc, 0)
Thanks in advance,
Phil

Phil,
Try this patch. It'll probably be official soon:
*** dbxml-2.3.10-original/dbxml/src/dbxml/nodeStore/NsSAX2Reader.cpp    Mon Oct 30 12:45:57 2006
--- dbxml-2.3.10/dbxml/src/dbxml/nodeStore/NsSAX2Reader.cpp     Fri Oct 26 10:51:11 2007
*** 1008,1016 ****
                          const XMLSSize_t colNum)
        int len = NsUtil::nsStringLen(errorText);
!       xmlbyte_t buf[500];
!       xmlbyte_t *bufp = buf;
!       len = NsUtil::nsToUTF8((MemoryManager*)0, &bufp,
                               errorText, len+1, 500);
        std::ostringstream s;
--- 1008,1015 ----
                          const XMLSSize_t colNum)
        int len = NsUtil::nsStringLen(errorText);
!       xmlbyte_t bufp = (xmlbyte_t ) fMemoryManager->allocate(500);
!       len = NsUtil::nsToUTF8(fMemoryManager, &bufp,
                               errorText, len+1, 500);
        std::ostringstream s;
*** 1022,1028 ****
        s << " Parse error in document ";
        s << "at line, " << lineNum;
        s << ", char " << colNum;
!       s << ". Parser message: " << buf;
        // log warnings as info, and errors as warning.
        // Neither is fatal to the program, and may be
        // what is expected.
--- 1021,1027 ----
        s << " Parse error in document ";
        s << "at line, " << lineNum;
        s << ", char " << colNum;
!       s << ". Parser message: " << bufp;
        // log warnings as info, and errors as warning.
        // Neither is fatal to the program, and may be
        // what is expected.

BSOD - memory management error

Hi,
So, I've got my other laptop, Compaq Presario CQ61. For like 5 or 6 month I've had a great deal of problems with it, like freezes, BSOD-s and not to mention that troubleshooter was down. I've transfered all personal files on external HDD and decided to reinstall Windows ( 7 ultimate - legal copy), hoping that the problem will be solved, but to no avail. Eventually, I installed Windows 8 Pro because as people in forums said, it may be a problem with installation disk. For like 4-5 days my HP laptop was running just well, all updates installed (haven't seen that lately), i just thought it was a miracle and my problem is solved. Today it appeared. BSOD. After reinstalling/installing both versions of Windows i got, it is my firm belief that this is a hardware problem. I tried memory management test and the result was something like "problems were found, contact your manufacturer". So my question is, is this a RAM problem or HDD? I've heard both versions, and if anyone had in the past the same symptoms as my laptop does and he managed to deal with it, please enlighten me as well. Thanks in advance.
This question was solved.
View Solution.

Hi @Calin1 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your Compaq Presario CQ61 and working fine then getting the BSOD and shutting down. I recommend to restore the BIOS defaults if you can get it to go to the screen.You could restore the BIOS with this document selecting the reloading the BIOS default settings. Not rollback. Restore BIOS defaults are needed as I feel that this will resolve the BSOD.
Here is a link to resolving BSOD if the BIOS restore does not help.
If that does not help at the end of the document it shows you to do a hardware test.
The hardware test will show if any parts are failing or have issues.
I hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

BB Desktop Manager error 1316 (windows 7) - cannot be uninstalled

Hi,
I am new to the forum, because I cannot seem to find an answer to my query anywhere.
I have a fairly new Dell laptop which has Windows 7 installed.
When I first got it, I installed BBDM on it and did a couple of back ups (so it did work at some point).
However, it now doesn't recognise my BB (Curve 8900) anymore and so I wanted to uninstall it.
In the control panel - uninstall porgramms - it didn't show up as a software, so before uninstalling the previous version, I thought, I'd over install the software again, a newer version (5.0.1) in an attempt to fix the sudden problem.
It may be worth mentioning that the PC doesn't recognise the devise either anymore, when plugging it in.
Having now installed version 5.0.1 didn't fix the problem and so I thought, okay, uninstall the whole thing and whilst this version IS now to be found in the control panel, when I start the uninstall it shows up error message 1316: A network error occured while attempting to read from the file C:\windows\installerblackberry desktop software.msi
The un-installation is then aborted.
On the BB support site it is recommended to uninstall the software (haha) and if necessary use the windows installer cleanup utility, however, at the link given, this cannot be found and when searching google it appears that that software has been pulled from the market and didn't work with windows 7 anyways.
So now I have probably two versions installed, neither of which works or can be uninstalled.
PLEASE PLEASE PLEASE help!
(Otherwise I might be going crazy)
Thanks,
J

Can you try to remove the software by following the clean uninstallation steps listed here
http://www.blackberry.com/btsc/KB02206
I never tried using the tool on Windows 7, but you can find it here if you still want to try it
http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Windows 7 Ult 64 memory mgmt errors ntoskrnl.exe nt+75BC0

Using WhoCrashed I get this error once in a while. Where should I post this question?
On Mon 4/14/2014 3:41:15
PM GMT your computer crashed
crash dump file:
C:\Windows\Minidump\041414-5584-01.dmp
This was probably caused by the
following module: ntoskrnl.exe (nt+0x75BC0)
Bugcheck code: 0x1A
(0x411, 0xFFFFF6800014DFF8, 0xF86000032C9C8886, 0xFFFFF8A025364283)
Error:
MEMORY_MANAGEMENT
file path:
C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel &
System
Bug check description: This indicates that a severe memory management
error occurred.
This might be a case of memory corruption. More often memory
corruption happens because of software errors in buggy drivers, not because of
faulty RAM modules.
The crash took place in the Windows kernel. Possibly
this problem is caused by another driver that cannot be identified at this time.
I got this two days earlier.
On Sat 4/12/2014 12:36:47
AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\041114-6115-01.dmp
This was probably caused by the
following module: ntoskrnl.exe (nt+0x75BC0)
Bugcheck code: 0x1A
(0x5003, 0xFFFFF70001080000, 0x161, 0x163000000C2)
Error: MEMORY_MANAGEMENT
file path:
C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel &
System
Bug check description: This indicates that a severe memory management
error occurred.
This might be a case of memory corruption. More often memory
corruption happens because of software errors in buggy drivers, not because of
faulty RAM modules.
The crash took place in the Windows kernel. Possibly
this problem is caused by another driver that cannot be identified at this time.

We do need the actual DMP file as they contain the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
We prefer at least 2 DMP files to spot trends and confirm the cause.
Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
If you have any questions about the procedure please ask
If you are using Blue screen view, who crashed, or a similar application don't. They are wrong at least as often as they are correct
Wanikiya and Dyami--Team Zigzag

Error code kernel data inpage , memory management , 0xc000021a , 0xc00000e9 on windows 8

Hi everyone I am sahasvat.I am using Acer aspire 5755. It's specification are Intel i3 3rd gen processor, 2Gb DDR 3 ram and 500 GB hdd.I am running on windows 8 OS. I opened about 4 tabs on google chrome and suddenly a blue screen with sad face displayed
an error kernel data inpage and it got restarted and after 5 mins I opened google chrome and again blue screen came and displayed an another error memory management and while restarting on bios I pressed f8 and booted to safe mode as normal
mode didn't open.soon after 20 mins I restarted my lap and I received an error 0xc000021a bios and windows booted.i then pressed power button for a min and switched on my pc but it showed a different error 0xc00000e9. I restarted many times
either 0xc000021a or 0xc00000e9 used to come not an fixed error. I don't have my cd as it got scratches on CD. Plzz help me to get out of this problem.
I can't even access my laptop and I am using my windows phone to post this.

Hi everyone I am sahasvat.I am using Acer aspire 5755. It's specification are Intel i3 3rd gen processor, 2Gb DDR 3 ram and 500 GB hdd.I am running on windows 8 OS. I opened about 4 tabs on google chrome and suddenly a blue screen with sad face displayed
an error kernel data inpage and it got restarted and after 5 mins I opened google chrome and again blue screen came and displayed an another error memory management and while restarting on bios I pressed f8 and booted to safe mode as normal
mode didn't open.soon after 20 mins I restarted my lap and I received an error 0xc000021a bios and windows booted.i then pressed power button for a min and switched on my pc but it showed a different error 0xc00000e9. I restarted many times
either 0xc000021a or 0xc00000e9 used to come not an fixed error. I don't have my cd as it got scratches on CD. Plzz help me to get out of this problem.
I can't even access my laptop and I am using my windows phone to post this.

Memory Management, Crit Structure Corrupt, Bad Pool Caller, ntfs file system error

So after freshly installing Win 8.1 I was happy, untill I started to play some games that I previously played on Win 7, I've started to get a whole heap of errors, I did have more written down but have lost the bit of paper they were written on.
Here are the list of errors I can remember.
Memory Management, Crit Structure Corrupt, Bad Pool Caller, ntfs file system error
Specs:
Operating System
Windows 8.1 Pro 64-bit
CPU
AMD Athlon II X2 250
35 °C
Regor 45nm Technology
RAM
6.00GB Dual-Channel DDR2 @ 400MHz (5-5-5-18)
Motherboard
ASUSTeK Computer INC. M3N-H/HDMI (Socket AM2 )
40 °C
Graphics
SyncMaster (1440x900@60Hz)
SAMSUNG (1440x900@60Hz)
ATI Radeon HD 4800 Series (Microsoft Corporation - WDDM v1.1) (Sapphire/PCPartner)
Storage
698GB Western Digital WDC WD7500AAKS-00RBA0 ATA Device (SATA)

Adam
These are Related to
atikmdag.sys ATI Radeon Kernel Mode Driver. Yours is 2+ years old. I would update to the newest driver available.
Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Ken\Desktop\A040614-65203-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.16384.amd64fre.winblue_rtm.130821-1623
Machine Name:
Kernel base = 0xfffff803`be013000 PsLoadedModuleList = 0xfffff803`be2da9b0
Debug session time: Mon Apr 7 00:35:03.785 2014 (UTC - 4:00)
System Uptime: 0 days 0:08:48.334
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff80001cf7d73, ffffd0002305c470, 0}
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : atikmdag.sys ( atikmdag+70d73 )
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80001cf7d73, Address of the instruction which caused the bugcheck
Arg3: ffffd0002305c470, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
atikmdag+70d73
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx]
CONTEXT: ffffd0002305c470 -- (.cxr 0xffffd0002305c470;r)
rax=0000000000000000 rbx=ffffcf80021783a0 rcx=ffffcf8002334ff5
rdx=0000307ffdccb010 rsi=ffffcf8004734470 rdi=ffffcf80021783a0
rip=fffff80001cf7d73 rsp=ffffd0002305cea8 rbp=ffffd0002305cf00
r8=0000000000000006 r9=0000000000000000 r10=0000000000000384
r11=ffffcf8002334ff0 r12=0000000000000001 r13=ffffcf8004734470
r14=0000000000000000 r15=ffffcf8004734470
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
atikmdag+0x70d73:
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx] ds:002b:00000000`00000005=??
Last set context:
rax=0000000000000000 rbx=ffffcf80021783a0 rcx=ffffcf8002334ff5
rdx=0000307ffdccb010 rsi=ffffcf8004734470 rdi=ffffcf80021783a0
rip=fffff80001cf7d73 rsp=ffffd0002305cea8 rbp=ffffd0002305cf00
r8=0000000000000006 r9=0000000000000000 r10=0000000000000384
r11=ffffcf8002334ff0 r12=0000000000000001 r13=ffffcf8004734470
r14=0000000000000000 r15=ffffcf8004734470
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
atikmdag+0x70d73:
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx] ds:002b:00000000`00000005=??
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR: 0x3B
PROCESS_NAME: csrss.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
LAST_CONTROL_TRANSFER: from fffff800025cf3d7 to fffff80001cf7d73
STACK_TEXT:
ffffd000`2305cea8 fffff800`025cf3d7 : ffffcf80`04734470 ffffcf80`04734470 00000000`00000000 ffffcf80`01f52450 : atikmdag+0x70d73
ffffd000`2305ceb0 ffffcf80`04734470 : ffffcf80`04734470 00000000`00000000 ffffcf80`01f52450 ffffd000`2305cf00 : atikmdag+0x9483d7
ffffd000`2305ceb8 ffffcf80`04734470 : 00000000`00000000 ffffcf80`01f52450 ffffd000`2305cf00 fffff800`025f48d3 : 0xffffcf80`04734470
ffffd000`2305cec0 00000000`00000000 : ffffcf80`01f52450 ffffd000`2305cf00 fffff800`025f48d3 ffffcf80`04734470 : 0xffffcf80`04734470
FOLLOWUP_IP:
atikmdag+70d73
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx]
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: atikmdag+70d73
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: atikmdag
IMAGE_NAME: atikmdag.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4fdf9bbd
STACK_COMMAND: .cxr 0xffffd0002305c470 ; kb
FAILURE_BUCKET_ID: 0x3B_VRF_atikmdag+70d73
BUCKET_ID: 0x3B_VRF_atikmdag+70d73
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x3b_vrf_atikmdag+70d73
FAILURE_ID_HASH: {1ec4cdaf-008d-03dd-4ca9-ade1993441da}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag

Fatal Internal Error: "Memory Manager.cpp", line 547

Hello,
I am using LV 2009 and I am also getting an error as follows:
=======================================================
Fatal Internal Error: "Memory Manager.cpp", line 547
LabVIEW version 9.0.1
You will lose any unsaved work. For assistance in resolving this problem, please relaunch LabVIEW, or contact National Instruments.
=======================================================
I get this error when I start executing steps on TS 4.2.1 as well as when I do "Unload All Modules" in TS. Please find the attched logs. Further, I could not run anything in TS and need to restart the PC to re-run the sequence after everytime this error occurs.
We have transited through LV 8.0, 8.2, 8.5 and now 2009 over past 4 years for our project and this is the first time I could see this error.
Please help.
Thanks.
Attachments:
lvlog2010-06-09-10-06-07.txt ‏2 KB
lvlog2010-06-09-18-52-36.txt ‏1 KB
lvlog2010-06-09-19-16-20.txt ‏2 KB

Adding on to Pritam's post:
For the earlier "Fatal Internal Error: "Memory Manager.cpp", line 547" , we found that a couple of our dll's which were developed in LV 8.5.1 had not been recompiled in LV2009. After recompiling each of them in LV2009, and then running the same sequences in TestStand,this error vanished.
But now again we're seeing this error, and that too only on 3 PCs systems out of 5 PCs!
The same installer has been installed on all 5 sytems (after removing the earlier installers and running MSI Blast.exe them).
The error now appears again, only when we try to exit TestExec.exe and another tool built in LabVIEW.
So everything works fine and tasks are performed,etc, but when we close the window or try the exit that program, the "Fatal Internal Error: "Memory Manager.cpp", line 547" pops up.
If we say "OK" to it, the window closes, but the Task is seen still running in the Task Manager and has to be manually terminated (End Task).
Does anyone know what could be going wrong?

WIndows Server 2012 - Server Manager Error CLR20r3

WIndows Server 2012 - Server Manager Error CLR20r3
I have just experienced this error of ( CLR20r3) when trying to add or remove server roles.
Server Manager crashes when trying to go into the Add/ Or Remove server roles
What I have tried.
.NET Diag
.NET Fix
Lots of research, and didn't find any resolution.
Apparently this is not strictly tied to Windows Server 2012, as I see that Windows Server 2008 R2 , and even Windows desktop users have experienced this issue. With no direct resolution.
Here is a screen shot for reference.......
If anyone should obtain the MS Fix or hear of it, please post so that others who are experiencing this issue can find peace in their day.
I have given up, ended up performing a reinstall. ( sadly)
RF

Hi RF,
Based on your description, would you please refer to following operations and troubleshoot this issue?
Please use
Sytem File Checker tool to scan all protected system files.
Please
perform a clean boot to check if some third-party services affected.
Please backup the registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Ole. Then delete following two registry key (if exist): LeagcyImepersonationLevel and LegacyauthenticationLevel
Then log off and logon and monitor the result.
In addition, please navigate to %windir%\logs and check ServerManager and CBS log file if you can find some
relevant errors.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

CD Boot: memory overflow error! Trying to install Bootcamp / Windows 7 on MacBook Pro 2009 with external superdrive

Hi all,
I'm trying to install Bootcamp on my machine.
I was running Parallels before but need Bootcamp in order to run heavy software on the PC side (e.g. Rhino/Maxwell/etc).
I have a Macbook Pro 17" from around 2009, running Mountain Lion 10.7.3.
Problem is, my internal CD Drive is broken and doesn't read discs, so it couldn't read the Windows installation disc (Windows Home Premium 7 64 bit - OEM System Builder Pack).
So, I rang Apple to try to fix it and they said it would be cheaper and faster to buy an external SuperDrive.
I explained that I wanted it to install bootcamp and they said, fine.
However when I bought the SuperDrive, it turns out its only supposed to be working with new Macbook Pro with Retina display, and other machines that don't have internal cd drives.
At first it didnt work, but then I found a helpful website which enabled it to work on my machine.
So I went ahead and started installing Windows through the BootCamp Assistant.
It partitioned my hard drive - success!
But then it turned into black screen, with message saying "CDBOOT: Memory overfloor error"
Help please!!!
I suspect the problem is either:
a) Old Macbook Pro can't boot from the Windows disk
or
b) The Windows OEM version is somehow not designed to work with Mac. I bought it secondhand off a guy, thinking it was the full version, silly thing to do!
Your thoughts and help is seriously appreciated!
Tomorrow I'm going to the Apple Store and also to buy a brand new copy of Windows, I guess.

This has been resolved. It turned out that in spite of the message at the end of installation - "Windows could not complete the installation. To install Windows on this computer restart the installation" Windows was installed successfully but the problem was the Bootcamp drivers, it could not read them(install them) from my original OSX Istall DVD and I thought that that the whole package was not installed successfully. I will copy the intructions here as well since this thread may attract lots of other people with similar problem who may think it was not a good installation. Here you go:
Ok, after 3 sleepness nights I have found a solution and finally have a working Windows 7 Ultimate. I hope this will be helpful for everyone having similar issues and not have to go through the same nightmare.
Right away after logging in Windows for the first time insert the original Snow Leopard Install DVD and if Windows does not read it or install any drivers after clicking on setup.exe do the following:
Right-click on Start » Programs » Accessories » Command Prompt
Select Run as Administrator
Type cd /d D:, then press Enter
Type cd Boot Camp\Drivers\Apple, then press Enter
Type BootCamp64.msi, then press Enter
If you do not how to right click before installing the drivers the following:
Click on Start
Enter cmd in the search box
Instead of hitting the Enter key use Ctrl + Shift + Enter and will open a dialog box
Click Yes at the prompt and you will be running as an administrator.
If you do not have the original install DVD go the this link and follow the instructions(including the ones from the last comment):
<Edited by Host>

Microsoft-Windows-Windows Remote Management Error ID 142

In my Windows Server 2008 R2 OS in the Event Viewer there is an error pertains as Microsoft-Windows-Windows Remote Management Error ID 142 states-(WSMan operation CreateShell failed, error code 2150858999).What is this error? And What is the remedy for this
error?
System
Provider
[ Name]
Microsoft-Windows-WinRM
[ Guid]
{A7975C8F-AC13-49F1-87DA-5A984A4AB417}
EventID
142
Version
0
Level
2
Task
10
Opcode
2
Keywords
0x4000000000000002
TimeCreated
[ SystemTime]
2011-11-10T06:32:40.654451200Z
EventRecordID
37902
Correlation
[ ActivityID]
{01F11C40-F800-0000-0091-795E689FCC01}
Execution
[ ProcessID]
7140
[ ThreadID]
8080
Channel
Microsoft-Windows-WinRM/Operational
Computer
WIN-BNILITE1545.mumthaz.contoso.com
Security
[ UserID]
S-1-5-18
EventData
operationName
CreateShell
errorCode
2150858999
MumthazMuhsin

Hi,
Please perform the following steps to check the issue can be fixed.
Create the following Dwords under HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
• MaxFieldLength
o Dword
o Value 65534 (Decimal)
• MaxRequestBytes
o Dword
o Value 40000 (Decimal)
Reboot the server for the changes to take effect.
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Boot Manager error message on Windows 7 Toshiba Laptop

Well, I will start with what happened to it, though I don't really know. I was on the internet and it started freezing up horribly, then I didn't know what to do so I walked into the room of the house that doesn't get wireless, and gradually it unfroze. Then I went back to the other room got on again, then it just froze again, only this time walking into the next room didn't work, so I pressed the power button and shut it down. Then when I turned it back on I chose "Start Windows Normally" and I entered my password at the login screen, then it was on the screen that says "Welcome" and has the blue loading bar next to it, but I waited for at least 10 minutes and it still hadn't loaded. So, I try safe mode and all I get is a black screen with a mouse cursor, in all safe modes. Well, I decide to go to setup by pressing F2 at the Toshiba screen when you first turn it on. So, I did that and I restored the default settings, then exiting saving the settings, and then I turned it on, expecting it to work or at least have the Welcome thing. It went through the Toshiba screen, then it had a black screen for while , then I got an error message:
WINDOWS BOOT MANAGER
Windows has encountered a problem communicating with a device connected to your computer.
This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer.
If you continue to recieve this error message, contact the hardware manufacturer.
File: \Boot\BCD
Status: 0xc00000e9
Info: An unexpected I/O error has occurred.
So then what I did was I plugged in the charger, the mouse ( like on a desktop computer, only I stick this in my laptops usb thing) , my ipod, I put in the last cd I had in the disk drive, and I connected my computer to the modem from the other computer that I sometimes get on. It didn't do anything, it still gave me that message.
I would appreciate some help. I just got this computer in December 2009 for Christmas, and I have taken good care of it as far as I can tell. I really can't afford to replace anything right now, but if I have to I will find a way. What makes it worse is that I just got a new video game sent from my grandmother for my birthday....
Thank you for your help/thoughts/crap

it looks like a corrupted windows 7 OS or hdd issue , but you might try this one
Remove all usb devices and make sure that only ac adapter is plugged in your computer.
Turn on your computer and start tapping on F8. You should see windows advanced option when you do this.
Select on Safe Mode then Enter. If you can boot to safe mode you can try doing a system restore.
OR
On windows advance option. Select Repair my computer
Just follow the prompt and select system restore.
OR
On windows advance option. Select Repair my computer
Just follow the prompt and Windows Startup Repair
=========================================================
the only easy day was yesterday.....
=========================================================

B570 - Windows 8 - Blue screen crash & energy management error

I upgraded to windows 8 on the day it came out in the uk with no problems, some of my apps had to be reinstalled but nothing major.
the bluetooth app had to be uninstalled, never use it so not a major issue. the energy managment error just pops up on each start and i just click run without help. Seems to work fine, but would prefer for it not to have to ask me this.
Anyway everything looked to be okay and then i got the blue screen crash. Said something about a kernal crash. This has happened about every 2 days now since the install and is very annoying, just happens very randomly even when the laptop is really fast.
I spoke to lenovo's support team and they said new drivers will be installed automatically and it should resolve. It hasnt.
Was just wondering if there is any fix for this? any new drivers out that have to be installed, or bios settings anything?
Please help. Thanks

Satellite C850-19Q (PSCBYE-00L00GY4) <- from Croatia
Downloads here
This site is for US computers. Best to post in the European forums.
Toshiba Support Forums in Europe
-Jerry

NMI: Parity Check / Memory Parity Errors on Lenovo T500 2082-58M running Windows XP.

NMI: Parity Check / Memory Parity Errors are occurring on
five out of five Lenovo T500 laptops 2082-58M tested.
I can get the error to re-occur consistently by installing
IBM Director Client version 5.20 or 5.23, taking remote control and then within
the remote session I initiate a PC restart. This re-produces these errors
without fail.
I've also received this same error without Director but am
unable to cause this to re-occur consistently.
My Findings:
Changing the BIOS Settings from the default settings of :
BIOS Config > Display
Default Primary Video Device:[Internal]
Boot Display Device:[ThinPad LCD]
Graphics Device:[Discrete Graphics]
OS Detection for Switchable Graphics:[Enabled]
To the following settings resolves the issue though this
causes the installed and previously working ATI driver not to detect the video
device.
BIOS Config > Display
Default Primary Video Device:[Internal]
Boot Display Device:[ThinPad LCD]
Graphics Device:[Integrated Graphics]
OS Detection for Switchable Graphics:[Disabled]
What I have tried:
o Updated the BIOS and Drivers to Latest available
o Re-Installed the Display Driver, Downgraded the
Display Driver
o Removed the Display Driver and left BIOS
settings enabled (NMI errors re-occur)
To get to the above findings I tried removing /
re-installing pretty much every driver and disabling every option within the
BIOS. I am only listing what I believe is now relevant to the identified
problem. I can provide further information upon request.
Anyone able to help ?

Hello,
the switchable gfx doesn´t work in XP. In XP you have to choose gfx options in bios before booting os.
Please try:
Default Primary Video Device:[Internal]
Boot Display Device:[ThinPad LCD]
Graphics Device:[discrete Graphics]
OS Detection for Switchable Graphics:[Disabled]
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Itunes will not launch, no error message (windows xp, itunes 10.7.0.21)

Itunes will not launch, no error message (windows xp, itunes 10.7.0.21)
Yeah

OK, so i cannot enter into iTunes safe mode, whilst monitoring proccesses in the task manager I noticed that itunes will only stay open if i keep my fingers on shift and control-i dont know if that is worth mentioning- the proccess promptly ends after the release of the said keys, (I tried both the shift control keys on either side of the keyboard-same result) so i am stuck there.
P.S.
This version of iTunes had previously worked before, I uninstalled everything apple related after noticing how many processes (-id est-) /applications, were using up my memory.
afterwards I had need for iTunes, (i needed to wipe my iDevice) I reinstalled and this problem has arisen.

Memory Management Error in Windows 8.1

Similar Messages

Maybe you are looking for