Memory overflow in RSA3 but not in FM on which datasource created
Hi
I am getting the short dump in the generic datasource extraction ( To extract CDPOS and CDHDR data) which is based on a FM. when i directly execute the FM its not giving any dump and giving me correct data, but when execute through RSA3, it gives following error. Please help me how can i correct this ?
STORAGE_PARAMETERS_WRONG_SET and TSV_TNEW_PAGE_ALLOC_FAILED errors
Below is the code, highlited is the code which is giving problem.
Declaration
OPEN CURSOR WITH HOLD S_CURSOR FOR
SELECT MANDANT OBJECTCLAS OBJECTID CHANGENR USERNAME UDATE FROM CDHDR
WHERE OBJECTCLAS EQ 'EINKBELEG'
AND OBJECTID IN L_R_OBJECTID
AND UDATE IN L_R_UDATE.
FETCH NEXT CURSOR S_CURSOR
APPENDING CORRESPONDING FIELDS
OF TABLE IT_CDHDR
PACKAGE SIZE S_S_IF-MAXSIZE.
IF SY-SUBRC <> 0.
CLOSE CURSOR S_CURSOR.
RAISE NO_MORE_DATA.
ENDIF.
S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.
**************HERE IS SYSTEM GIVING DUMP
SELECT * FROM CDPOS INTO TABLE IT_CDPOS
FOR ALL ENTRIES IN IT_CDHDR
WHERE OBJECTCLAS EQ IT_CDHDR-OBJECTCLAS
AND OBJECTID EQ IT_CDHDR-OBJECTID
AND CHANGENR EQ IT_CDHDR-CHANGENR
AND TABNAME EQ 'EKKO'
AND FNAME EQ 'FRGZU'.
**************HERE IS SYSTEM GIVING DUMP
Further Processing
LOOP AT IT_CDPOS INTO WA_CDPOS.
READ TABLE IT_CDHDR INTO WA_CDHDR
WITH KEY OBJECTCLAS = WA_CDPOS-OBJECTCLAS
CHANGENR = WA_CDPOS-CHANGENR
OBJECTID = WA_CDPOS-OBJECTID.
WA_DATAPACKAGE-MANDANT = WA_CDPOS-MANDANT.
WA_DATAPACKAGE-OBJECTCLAS = WA_CDPOS-OBJECTCLAS.
WA_DATAPACKAGE-OBJECTID = WA_CDPOS-OBJECTID.
WA_DATAPACKAGE-CHANGENR = WA_CDPOS-CHANGENR.
WA_DATAPACKAGE-VALUE_NEW = WA_CDPOS-VALUE_NEW.
WA_DATAPACKAGE-VALUE_OLD = WA_CDPOS-VALUE_OLD.
WA_DATAPACKAGE-USERNAME = WA_CDHDR-USERNAME.
WA_DATAPACKAGE-UDATE = WA_CDHDR-UDATE.
APPEND WA_DATAPACKAGE TO E_T_DATA.
CLEAR: WA_DATAPACKAGE,WA_CDHDR,WA_CDPOS.
ENDLOOP.
ENDFUNCTION.
Edited by: Tripple k on Oct 21, 2010 6:07 PM
Hi Rahul
I restricted to 1 data call and 1 record per call in RSA3, still i am getting the same problem.
Regards
Kamal
> Hi,
>
> When your execute through RSA3, there is a limit to the number of records that can be held in the memory while extraction. So it may go for these dumps. You may restrict the number of records by changing Data Records / Calls & Display Extr. Calls while running RSA3.
Similar Messages
-
0fi_ar_4 netduedate(netdt) value coming in RSA3 but not coming in BI PSA
Hi all,
i am using 0fi_ar_4,
netduedate(netdt) value coming in RSA3 but not coming in BI PSA, in BI PSA there is 10-12 do cument there where netduedate is null while for same document we are getting the netduedate running from transaction RSA3, how?
Thanks.Hi,
I found the problem, i have write a user exit in data sourc e in ecc, i am getting value in rsa3 but not getting in BI PSA becaue ise there is 20000 KB limits for per info package load request i.e. idoc size, as its fixed, i did change little in my user exit at ECC.
thaks -
i can see my device in itunes but not my music,movies which is in my itunes. the folder is not shown on itunes ): what should i do. please help! ):
Have you tried installing and updating apps from the iPhone itself?
If you have restrictions enabled go to settings>general>restrictions and make sure "Installing Apps" is on. -
User should not release the PR which is created by him
Hi
We didnu2019t use work flow functionality for PR Release. So same user can create PR and release the same PR in our system. Our requirement is user should not release the PR which is created by him. I would like to put this control in system.
How can I achieve this requirement?
Thanks
JenyHi Ravi
Thanks for your reply. but they need to have authroization for PR release . bec they are eligble to release PR as per delegation of authroity. but they should not release their own PR . they can relase other's PR within their level.
Jeny. -
I'm trying to delete an album titles pictures from my photos album but can't work out how to do it. I've tried auto back up and erase which deletes other albums but not the photo album. Even selecting individual photos and selecting edit does nothing. Any tips how to erase this album would be greatly appreciated. Thank you.
Temperature Monitorhttps://www.macupdate.com/app/mac/12381/temperature-monitor
http://www.bresink.com/osx/HardwareMonitor.html
SMCFanControl 2.4+
https://www.macupdate.com/app/mac/23049/smcfancontrol
UPS
http://www.amazon.com/CyberPower-CP1500PFCLCD-Compatible-1500VA-Tower/dp/B00429N 19W/
Metro Vacuum ED500 DataVac 500-Watt 0.75-HP Electric Duster 120-Volt
www.amazon.com/Metro-Vacuum-ED500-500-Watt-Electric/dp/B001J4ZOAW/
X1900
http://www.xlr8yourmac.com/Graphics/X1900XT_Overheating/ATI_X1900_artifacts.html
http://www.xlr8yourmac.com/Graphics/radeon_X1900XT/X1900XT_dust_buildup.html#sto rytop
ATI Radeon 5770
http://store.apple.com/us/product/MC742ZM/A
http://www.amazon.com/Apple-ATI-Radeon-5770-MC742ZM/dp/B003Z6QH6M
http://www.bhphotovideo.com/c/product/726537-REG/Apple_MC742ZM_A_ATI_Radeon_HD_5 770.html
How To Install and Remove Memory Mac Pro
https://support.apple.com/kb/HT4433
2x2GB FBDIMM DDR2 667MHz @ $32http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/
Resetting the System Management Controller (SMC)https://support.apple.com/kb/HT3964 -
Horizontal Bar in the RSA3 is not showing up for Generic Datasource.
Hi There,
Created a Generic Extarctor based on a two tables PAYR and REGUH.
Included 60 fields in the Generic datasource. Everything is fine and when i check the data in extract checker
RSA3, the horizontal bar is not showing up and i could only see 15 fields. I couldn't able to see the rest of the fields.
Can someone suggest what should i do to see all the fields in RSA3? Why Horizontal bar is not showing up?
Out of 60 fields only very few are hidden and it should show atleast 40 fields, but not happening..
Thanks
VandanaHI There,
Thanks for all your responses.
1 - Tried to change the layout by going into Menu Settings --> Layout ---> Current, but no option to change.
2 - If I check the value of a particular field in the magnifier, then I could able to see all the fields
3 - After executing the RSA3, tried to change to ALV Grid by going into LIST, but again no option available to change.
4 - Checked the RSA2, and to my surprise all the fields are ticked as Key. Is that something why i'm able to see all fields in
the browser?
5 - But when the check the datasource in RSA6, only 3 were ticked as Key and those three fields i can see before
extracting the data using extract checker RSA3.
6 - Why all fields are ticked and showing and Key in RSA2 ?
The above is the current status of this issue. Can anyone please suggest how i should go head?
Thanks
Vandana -
details are listed in the question; i login using one email address to this site but not my second, which i have always been able to do
The error message is:
Login failed because your username or password was entered incorrectly.
However, all my login information is correct.try the hints found at
http://support.apple.com/kb/TS1417 -
Hi Friends,
I have added some custom fields to the 0CO_OM_OPA_6 data source. Following are the details.
1) Custom fields: ZZEBELN (Purchasing Doc), ZZUSNAM (Username)
2) Code populated in SE19 (BADI for this Datasource)
3) RSA3: Test extraction pulls the records for both the custom fields correctly.
4) RSA5, and RSA6 - Fields are unchecked for hidden and field only. They are made available.
5) Extract Structure replicated into BW and its pulled over from extract structure into Transfer structure.
6) Mapped to corresponding fields in BW update rule and transfer rules. (No routines or formulas exist)/
7) When load extracted into BW, data is blank for both the fields in PSA itself.
Our BW is 7.3 but we still use this datasource as 3.x transfer rules and datasource. In BW, it is connected to the Cube 0OPA_C11 via update rules and 3.x transfer rules only.
Is there any reason for the data being populated into the RSA3, where as not into PSA. Please consider the above points, and let me know if I have done or missing anything here in my steps. I have gone thru several forums and havent got any specific replies for such issues. Have you come across such issues, please share your thoughts and views.
Any of your replies will definitely help. Really appreciate your inputs.
Thanks!!
PrasithHi Prasith ,
After reading all the answers , what i feel we are missing a major step ie Re-initialization of the cube .
As you changed the extract structure and added new fields and for this Data source i assume that deltas were running already , the BW system cannot pull these new fields directly from ECC unless you have not done a re-INit again .
The Re-init is pretty simple and not as complex as LO.
I would advise you to re-init for 01.2014 till 016.9999 , run full load and then delatas will flow in later on . Check during the full load if you are able to see these fields in BW in (PSA/ Cube) .
But be careful you need to do Re-init only on week ends when there are no transactions happening else you might end up in duplicate data .
Hope this helps !
Let me know how it goes .
Regards
Zeenath -
Works in RSA3 but not when pulling from BI
Hi,
I created a generic dataSource(Function Module) for Bill Of Material. When testing in RSA3 it is working fine. But when pulling data from BI with particular material in the Data Selection, it is saying "No data available". If I am pulling the same with no data selection then it is giving an error message "Job terminated in source system --> Request set to red".
When checked in SM37 I see the following error messages.
No active nametab exists for /SAPAPO/MATKEY DA 300
Job cancelled after system exception ERROR_MESSAGE
Can any body help me on this
Thanks for your help
SubraEvery thing is fine in all these transactions SM58, BD87, & WE05. There is no problem with the connections at all. I replicated many times and the error is always the same.
The error message below is the reason.
No active nametab exists for /SAPAPO/MATKEY
This messsage is not coming when testing in RSA3. Only when pulling the data from BI, this error is happening.
We are not using SAPAPO but still this message is coming up.
thanks
Subra -
Accounting Doc is created and it is in RSA3, but not loaded into BW side ?
Hi all,
One Accounting Document (of Credit Memo type) has been created with Tcode VF01 and this document exists in Extractor Checker (RSA3) and BSEG & BKPF tables and it has the corresponding Billing Document (VBELN) details in those tables. The Document with VA03 the Status for Sales Doc & Billing Doc is Cleared, but for the Accounting Doc is 'Not Cleared'. We have loaded the delta with 0FI_GL_4 Extractor in to an ODS, but this record is not coming into BW. Why it is missing ? Is it sitting somewhere and waiting for some other process, PLEASE ???
Thanks in advance.
Regards,
Venkat.Hi Sam,
There are no Selections in the InfoPackage.
As you said, as default this extractor pulls records a day old. This record was created yesterday and it should be available today in RSA7, isn't it? But, it is NOT in RSA7. I thought that if it is in RSA7 then I could load the Delta again to get the records that were created yesterday. Does it require any other process to move them into RSA7, PLEASE?
Thanks,
Venkat. -
Memory leak while debugging but not in release version
I have an Adobe AIR application that must load and unload multiple external swfs, and it must run for hours.
I had an issue where there was a memory leak. I tried all kinds of fixes, including rolling back SDKs and Adobe Runtime,
but every time I tested in Flashbuilder, the memory would climb, and with each unload a FlexLoader would stay in memory.
Finally I tried creating a release build, and low and behold the memory did not climb. It stayed the same even under stress testing.
So evidently, the memory leak had to do with debug version, and once it was a release version, the leak disappeared.UPDATE: The problem was with the external swfs being loaded into the main application.
If I compiled them in debug, they leaked. In release version they did not. -
Enhanced 0MATERIAL_ATTR-Extractor: Data in R/3-RSA3 but not in BW-PSA
Hi,
we enhanced our 0MATERIAL_ATTR- DataSource with a "new" Z-field.
I checkt the DataSource with RSA3 and everything seemed to be fine (right data in Z-Field).
I loaded one record to BW and this new Z-Field is empty (I expected data!).
I allready:
- activated everything on BW
- deleted Source System Assignment and assigned it new
- Replicated the Data Source (twice)
- checked Transfer Rules
- checked the assignment of the z-field (Type is Ok, it is assigned)
- searced with google and in this forum.
Monitor shows green light on DataLoading (no errors)
ST22 shows no shortdump (BW and R/3)
System BW 3.5
Why can i see data on RSA3 and BW can´t load values for this new Z-Field?
Thanks in advance!
Greetings
Daniel
Btw: Yes, i assign points!Hi,
Full Load: It was a full load for about 100 Materials. I cant start a full load without restriction, there are to many data...
To delete all MD: This is not possible!
BW 3.5.
I'll try to delete DS and rereplicate ist. ...
thanks. -
Hello everyone!
I have a simple question that hopefully has a simple answer (which mocks me with its elusiveness). In the code below (taken from Gary Rosenzweig's "ActionScript 3.0 Game Programming University" (2nd ed.)), I am declaring a simple style sheet using all AS3 supported tags/attributes to underline an HTML link. My question is this: why won't AS3 underline the chosen font (Arial) but yet it will underline certain other fonts that I substitute it for (such as "Times New Roman" and "Garamond")?
// create a basic format
var myFormat:TextFormat = new TextFormat();
myFormat.font = "Arial";
myFormat.size = 24;
myFormat.bold = true;
var myStyleSheet:StyleSheet = new StyleSheet();
myStyleSheet.setStyle("A",{textDecoration: "underline", color: "#0000FF"});
// create a text field with a Web URL link
var myWebLink:TextField = new TextField();
myWebLink.defaultTextFormat = myFormat;
myWebLink.styleSheet = myStyleSheet;
myWebLink.selectable = false;
myWebLink.htmlText = "Visit <A HREF='http://flashgameu.com'>FlashGameU.com</A>!";
myWebLink.x = 80;
myWebLink.y = 90;
myWebLink.width = 400;
myWebLink.height = 30;
addChild(myWebLink);
var myLink:TextField = new TextField();
myLink.defaultTextFormat = myFormat;
myLink.styleSheet = myStyleSheet;
myLink.selectable = false;
myLink.htmlText = "Click <A HREF='event:testing'>here</A>";
myLink.x = 80;
myLink.y = 190;
myLink.width = 400;
myLink.height = 30;
addChild(myLink);
addEventListener(TextEvent.LINK, textLinkClick);
function textLinkClick(event:TextEvent) {
trace(event.text);Mr. Murphy,
You see what I mean? I knew it would be a simple answer - it had to be, right? That way when someone helped me figure it out, I would get the pleasure of kicking myself for not having seen it before. I tried temporarily disabling the default text (thinking maybe it was somehow interfering with the style sheet), ensuring that I had the fonts that I was trying to use embedded in my program, including all the formatting in the actual style sheet rather than some of it resting in the default text statement, and did a couple other things that now escape my memory. What I didn't do was change the font size to see if it was simply cutting off the underscore. Sure I thought about it, but didn't actually follow it up.
What makes this worse is that, in the book I referenced, the author doesn't say anything about having to change the font size for this particular application and goes further by demonstrating via inline image his "perfect" outputted result using the exact code that I did. I know this threw off other readers as well who tried to emulate his result only to find that the underline magically "disappeared" when they did it.
Thanks for the help! As always, I appreciate it. -
Need to stop photostream on one device but not the other. Which one?
Here is my problem. I have photostream activated on my iPhone, iPad, and my Mac (iPhoto). I take 95% of my photos on my iPhone, but I often like to look at them on the larger screen on my iPad. So I like it that the iPhone photos sync to my iPad through photostream. However, all of the photos I've taken on my iPhone are there twice; once in the main folder and once in photostream. I now barely have any free space on my iPhone and I think it is affecting the device's performance (more apps don't open or crash now than ever before, it's processing commands slower). In iTunes it shows barely any free space remaining on the device. What I'd like to do is to in essence stop duplicating all the photos on my iPhone but keep the iPhone photos flowing to my iPad through photostream. Can I do this? Is it as easy as going to Settings and turning off photostream on one of the two devices? If so, which one? (If this works, I realize I may have to manually delete the 1000 photos that are currently on my iPhone. I also would not get any of my iPad photos on my iPhone, but that's okay for now.) Or, is there "do keep duplicate photo" switch somewhere? I appreciate the advice. Just don't want to flip the wrong switch.
For storage purposes, I'm not totally committed to iCloud yet. I store all my photos in iPhoto on my Mac where I can back them up on disk and hard drive, so I still regularly sync both devices to my Mac through iTunes.Photos in albums that you create from the camera roll don't contain duplicates, but only links to the original photos. However, photos in the my photo stream album are duplicates (although they are "device optimized" copies of the original). If you want to continue to use photo stream without this happening, you can either import the originals from the camera roll and delete them from your phone, as explained here: http://support.apple.com/kb/HT4083; or, save the photo stream photos on your iPad to the camera roll (by tapping Edit, tap the photos, tap Share, tap Save to Camera Roll), then delete them from the photo stream album on either device. (Deleting photo stream photos on either device will delete them from the other.)
If you choose to delete the photo stream photos, you can tap Edit, tap the photos, then tap Delete.
Also, keep in mind that photo stream will only keep a rolling collection of up to 1000 photos on your devices, so as you add additional photos, older ones will be removed. -
Who can give me advice - do i have to change settings in i pod touch or in the folders from my computer ?
Linn Kinsky is a app which helps you to control your LINN audio - streamer
This Kinsky programm is available for computers and apple products as well. So the Kinsky programm runs perfectly on my windos computer and after reading articles i decided to purchase a more handy ipod touch to control my audio-streamer instead of using the notebook.
unfortunately wma files are shown only. Meanwhile i ripped some cds as AIFF because I expected the problem here but nothing has changed.
Anyway thanks for your answer Matthias
Maybe you are looking for
-
My icloud and Apple ID aren't the same email address. My phone wont let me change my icloud email. I don't know the password to my icloud account, and every time I try to email myself the password, it doesn't go through.
-
Is it possible to modify a view at run time?
Hi, I am relatively new to using SQL Server, so sorry if this is impossible or very easy and I missed the solution. I am working on an enterprise SQL Server 2008 R2. Because of the size of the company, we do not want to create new Views as they need
-
Output Determination - Transmission medium 5
Hi All, I have a requirement where I need to send a mail to external e-mail address after PGI. I used transmission medium 8 with output type and attached my own program to it to send a mail. which is working fine. I was wondering if there is any othe
-
Hi everyone, I had a system crash on my G5 at work (the kind where lines of code appear over the desktop), but this time when i rebooted my ethernet connection doesn't work at all. I tried plugging it in to other ethernet outlets but still nothing wo
-
InfoObjects Key disappeared after BW support packages applied
Hi. We have a serious problem, after we applied BW support packages (7.0110) all our infoobjects that are created as text only, no master data, are only displaying the text. The objects key is empty. Do anybody have a solution for this? Koos.