Memory Overflow

Good morning everyone ....
I have an application in labview 8.6 that every cycle is increasing the memory, even stopping the application memory is not deallocated. The only way is to kill the thread.
What can be?
Have some way I veiricar which VI's that are causing this error?
Thank you for your attention.

Ok, thanks for the help.
I VI's that are getting variables for parameter passing, as I clean these variables after using the VI's?

Similar Messages

Network Booting Solaris 10 on Netra T4 - scratch memory overflow error

Hi,
I recently got a hold of a Netra T4 server, and am now trying to install Solaris 10 on it. Since the server can DVD-driveless, I had to resort to booting it over the network from a boot server. I have progressed through a series of errors, from not configuring the NFS correctly, to making sure the RARP was on as well.
The current issue that I am having is when i start the boot (boot net -v install), it begins to load the image, and then haults when it reaches:
Rebooting with command: boot net -v install
Boot device: /pci@8,700000/network@5,1: File and args: -v install
38e00 Using RARP/BOOTPARAMS...
Internet address is: 10.10.1.201
hostname: bfc
domainname: (none)
Found 10.10.1.120 @ 0:30:48:8d:c2:6
root server: owl (10.10.1.120)
root directory: /pub/install/Solaris_10/Tools/Boot
boot: cannot open kernel/sparcv9/unix
Enter filename [kernel/sparcv9/unix]: /pub/install/Solaris_10/Tools/Boot/platfor
m/SUNW,Netra-T4/kernel/drv/sparcv9/lombus
boot: failed to allocate 8192 bytes from scratch memory
panic - boot: boot: scratch memory overflow.
Program terminated
I'm not exactly sure why this is occuring, or what I can do to resolve this. Has anyone else come across this scenario? Judging from google searches, I haven't found anything that can help me fix this. Hopefully someone can.
Thanks a ton,
Kyle

as well, I have tried using various directories to install from, all coming to the same result.

Network Boot of Solaris 10 on Netra T4 - scratch memory overflow

Hi,
I recently got a hold of a Netra T4 server, and am now trying to install Solaris 10 on it. Since the server can DVD-driveless, I had to resort to booting it over the network from a boot server. I have progressed through a series of errors, from not configuring the NFS correctly, to making sure the RARP was on as well.
The current issue that I am having is when i start the boot (boot net -v install), it begins to load the image, and then haults when it reaches:
Rebooting with command: boot net -v install
Boot device: /pci@8,700000/network@5,1: File and args: -v install
38e00 Using RARP/BOOTPARAMS...
Internet address is: 10.10.1.201
hostname: bfc
domainname: (none)
Found 10.10.1.120 @ 0:30:48:8d:c2:6
root server: owl (10.10.1.120)
root directory: /pub/install/Solaris_10/Tools/Boot
boot: cannot open kernel/sparcv9/unix
Enter filename [kernel/sparcv9/unix]: /pub/install/Solaris_10/Tools/Boot/platfor
m/SUNW,Netra-T4/kernel/drv/sparcv9/lombus
boot: failed to allocate 8192 bytes from scratch memory
panic - boot: boot: scratch memory overflow.
Program terminated
I'm not exactly sure why this is occuring, or what I can do to resolve this. Has anyone else come across this scenario? Judging from google searches, I haven't found anything that can help me fix this. Hopefully someone can.
Thanks a ton,
Kyle

that path was one of the specific paths that I used to manipulate the boot. I resulted to trying this because it was unable to load from kernel/sparcv9/unix. This thing is, that path is available on the media that I am using, so I have no idea why is it saying it can't find it.
The path that you see:
<pub/install/Solaris_10/Tools/Boot/platform/SUNW,Netra-T4/kernel/drv/sparcv9/lombus>
was one of the paths that I tried using to get it to install from, because it said it couldn't find the default path. The path you see just happened to be the one that was on the screen when I copied it to show the error message in this thread.
As you can see, I'm a little stuck. As it stands...I don't know many things about installing on sparc servers.
With that said, any help would do. At the moment, I am downloading the Solaris 9 media, and then I will try to get at Solaris 10 by upgrading the software. If this fails, I will just buy a DVD drive.
Can anyone still help me?

Solaris 10 Jumpstart error: panic - boot: boot: scratch memory overflow.

I am setting up a Solaris Jumpstart server using a Linux server as the Boot/Config/Install server. The Sun box I am using is a v120 that will be running Solaris 10 update 5.
After running the "boot net - install" command and running through the setup the install terminates with the error
boot: failed to allocate 8192 bytes from scratch memory
panic - boot: boot: scratch memory overflow.
Program terminated
ok
ok
I found a patch (111306-07) that supposedly fixes this problem (logged as bug 4411148). Is there a specific way to add a patch to Jumpstart so that it installs before the system reboots after the main install is done? I know the patches folder goes off of the added on date for the patch and not a patch_order file, does that mean it can just be placed in the folder and will be added automatically? Has anyone seen this error message before on their own systems?
Thanks in advance for any help.

derekw wrote:
I am setting up a Solaris Jumpstart server using a Linux server as the Boot/Config/Install server. The Sun box I am using is a v120 that will be running Solaris 10 update 5.
After running the "boot net - install" command and running through the setup the install terminates with the error
boot: failed to allocate 8192 bytes from scratch memory
panic - boot: boot: scratch memory overflow.So this happens while the client jumpstart OS is running.
I found a patch (111306-07) that supposedly fixes this problem (logged as bug 4411148). Is there a specific way to add a patch to Jumpstart so that it installs before the system reboots after the main install is done?You actually need to install it before the OS loads I would thing.
I know the patches folder goes off of the added on date for the patch and not a patch_order file, does that mean it can just be placed in the folder and will be added automatically? Has anyone seen this error message before on their own systems?Not here. You want to install the patch into the jumpstart boot image. You may also need to install the patch onto the installed OS, but that's less certain.
For the first part, find your jumpstart image and pass that into patchadd with the -C flag to patch the jumpstart portion.
Darren

CDBOOT: Memory overflow error while in partitioning step (or after). What do I do now?

CDBOOT: Memory overflow error while in partitioning step (or after). What do I do now?
What does this mean?
Mac OS 10.9.1 (MacBook Pro Mid 2009)
USB flash memory drive formatted DOS FAT connected - with Windows support package downloaded from Apple
USB external CD DRIVE connected (and working) with Windows 7 instal disc (internal SuperDrive not working)

If your computer came with an internal optical drive you must use that to install Windows.

Memory overflow in buffer synchronization in sm21

HI ,
Iam getting memory overflow in buffer synchoronization in sm21 for BI System. After referring the thread Reg: Memory oveflow in buffer synchronization error in SM21 i understand buffering needs to be switch off from se13 for /BIO/PDOC_NUMBER & /BIO/PDOC_NUMBER tabels (in my case). But, when i try to switchoff the Buffering mode in production system client settings has been set to NOT MODIFIABLE.
Please suggest how can i switch off the buffering without changing the client Settings. Is it possible to create Workbench request from development system switchofff the buffer same to imported in the production system.

Hi,
Are you able to see these table in SE11? If yes then you can switch off the buffering using SE11-->Technical settings and switch off the buffering. This is transportable.
Regards,
Vamshi.

Memory overflow in RSA3 but not in FM on which datasource created

Hi
I am getting the short dump in the generic datasource extraction ( To extract CDPOS and CDHDR data) which is based on a FM. when i directly execute the FM its not giving any dump and giving me correct data, but when execute through RSA3, it gives following error. Please help me how can i correct this ?
STORAGE_PARAMETERS_WRONG_SET and TSV_TNEW_PAGE_ALLOC_FAILED errors
Below is the code, highlited is the code which is giving problem.
Declaration
      OPEN CURSOR WITH HOLD S_CURSOR FOR
      SELECT MANDANT OBJECTCLAS OBJECTID CHANGENR USERNAME UDATE FROM CDHDR
             WHERE OBJECTCLAS EQ 'EINKBELEG'
               AND OBJECTID IN L_R_OBJECTID
               AND UDATE    IN L_R_UDATE.
    FETCH NEXT CURSOR S_CURSOR
           APPENDING CORRESPONDING FIELDS
           OF TABLE IT_CDHDR
           PACKAGE SIZE S_S_IF-MAXSIZE.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR S_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.
**************HERE IS SYSTEM GIVING DUMP
   SELECT * FROM CDPOS INTO TABLE IT_CDPOS
FOR ALL ENTRIES IN IT_CDHDR
WHERE OBJECTCLAS EQ IT_CDHDR-OBJECTCLAS
    AND OBJECTID EQ IT_CDHDR-OBJECTID
    AND CHANGENR EQ IT_CDHDR-CHANGENR
    AND TABNAME EQ 'EKKO'
    AND FNAME   EQ 'FRGZU'.
**************HERE IS SYSTEM GIVING DUMP
Further Processing
LOOP AT IT_CDPOS INTO WA_CDPOS.
    READ TABLE IT_CDHDR INTO WA_CDHDR
     WITH KEY OBJECTCLAS = WA_CDPOS-OBJECTCLAS
              CHANGENR = WA_CDPOS-CHANGENR
              OBJECTID = WA_CDPOS-OBJECTID.
    WA_DATAPACKAGE-MANDANT = WA_CDPOS-MANDANT.
    WA_DATAPACKAGE-OBJECTCLAS = WA_CDPOS-OBJECTCLAS.
    WA_DATAPACKAGE-OBJECTID = WA_CDPOS-OBJECTID.
    WA_DATAPACKAGE-CHANGENR = WA_CDPOS-CHANGENR.
    WA_DATAPACKAGE-VALUE_NEW = WA_CDPOS-VALUE_NEW.
    WA_DATAPACKAGE-VALUE_OLD = WA_CDPOS-VALUE_OLD.
    WA_DATAPACKAGE-USERNAME = WA_CDHDR-USERNAME.
    WA_DATAPACKAGE-UDATE    = WA_CDHDR-UDATE.
    APPEND WA_DATAPACKAGE TO E_T_DATA.
    CLEAR: WA_DATAPACKAGE,WA_CDHDR,WA_CDPOS.
ENDLOOP.
ENDFUNCTION.
Edited by: Tripple k on Oct 21, 2010 6:07 PM

Hi Rahul
I restricted to 1 data call and 1 record per call in RSA3, still i am getting the same problem.
Regards
Kamal
> Hi,
>
> When your execute through RSA3, there is a limit to the number of records that can be held in the memory while extraction. So it may go for these dumps. You may restrict the number of records by changing Data Records / Calls & Display Extr. Calls while running RSA3.

CD Boot: memory overflow error! Trying to install Bootcamp / Windows 7 on MacBook Pro 2009 with external superdrive

Hi all,
I'm trying to install Bootcamp on my machine.
I was running Parallels before but need Bootcamp in order to run heavy software on the PC side (e.g. Rhino/Maxwell/etc).
I have a Macbook Pro 17" from around 2009, running Mountain Lion 10.7.3.
Problem is, my internal CD Drive is broken and doesn't read discs, so it couldn't read the Windows installation disc (Windows Home Premium 7 64 bit - OEM System Builder Pack).
So, I rang Apple to try to fix it and they said it would be cheaper and faster to buy an external SuperDrive.
I explained that I wanted it to install bootcamp and they said, fine.
However when I bought the SuperDrive, it turns out its only supposed to be working with new Macbook Pro with Retina display, and other machines that don't have internal cd drives.
At first it didnt work, but then I found a helpful website which enabled it to work on my machine.
So I went ahead and started installing Windows through the BootCamp Assistant.
It partitioned my hard drive - success!
But then it turned into black screen, with message saying "CDBOOT: Memory overfloor error"
Help please!!!
I suspect the problem is either:
a) Old Macbook Pro can't boot from the Windows disk
or
b) The Windows OEM version is somehow not designed to work with Mac. I bought it secondhand off a guy, thinking it was the full version, silly thing to do!
Your thoughts and help is seriously appreciated!
Tomorrow I'm going to the Apple Store and also to buy a brand new copy of Windows, I guess.

This has been resolved. It turned out that in spite of the message at the end of installation - "Windows could not complete the installation. To install Windows on this computer restart the installation" Windows was installed successfully but the problem was the Bootcamp drivers, it could not read them(install them) from my original OSX Istall DVD and I thought that that the whole package was not installed successfully. I will copy the intructions here as well since this thread may attract lots of other people with similar problem who may think it was not a good installation. Here you go:
Ok, after 3 sleepness nights I have found a solution and finally have a working Windows 7 Ultimate. I hope this will be helpful for everyone having similar issues and not have to go through the same nightmare.
Right away after logging in Windows for the first time insert the original Snow Leopard Install DVD and if Windows does not read it or install any drivers after clicking on setup.exe do the following:
Right-click on Start » Programs » Accessories » Command Prompt
Select Run as Administrator
Type cd /d D:, then press Enter
Type cd Boot Camp\Drivers\Apple, then press Enter
Type BootCamp64.msi, then press Enter
If you do not how to right click before installing the drivers the following:
Click on Start
Enter cmd in the search box
Instead of hitting the Enter key use Ctrl + Shift + Enter and will open a dialog box
Click Yes at the prompt and you will be running as an administrator.
If you do not have the original install DVD go the this link and follow the instructions(including the ones from the last comment):
<Edited by Host>

Memory overflow problems when processing huge XML files

Hi All,
We are in need of processing very large XML file.(more than 100MB)..
We ran this job in background and it resulted in runtime errors.
Is there any way of processing this file as a whole?
Edited by: Thomas Zloch on Nov 17, 2010 4:16 PM - subject adjusted

Normally such memory problems can be avoided by using block processing and clearing tempory data inbetween the blocks. However all XML techniques that I know (DOM, XSLT, ST) require all data to reside in an internal table at once. I will be facing a similar problem soon, so I'm quite interested in a solution.
One way would be to upgrade the hardware and allow more memory to be allocated to the workprocess (system administration). Some background information:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/49/32eb1fe92e3504e10000000a421937/frameset.htm
I wonder if there are other workarounds, let's see if there will be additional replies.
Thomas

Trying to clear an array of clusters with image info from memory - overflowing!

I am using a cluster with IMAQ interface name, session info, image array, and individual image and creating an array of that cluster. I try to clear the cluster by deleting the array elements, read an array of images, save them, and repeat the loop. Over time, though the arrays are tearing through all available RAM. I tried removing local variables (which I understand would save a copy of the entire array to memory every loop iteration) and had no luck - actually the code hangs now on the write function, where it thinks there is no image data. I didn't think I changed anything other than to direct wire where there had been local vars to pass information from one part of the sequence to the next. Help! (screenshots of code attached).
Attachments:
framegrab sequence 1.jpg ‏8 KB
framegrab sequence 1a.jpg ‏47 KB
framegrab sequence 2 - grab and save.jpg ‏149 KB

Hi, Nasgul,
Not sure where you have resources leak - from your screenshots its not clear.
But one is clear - you may not understand that IMAQ Images in LabVIEW passed by references. So, if you want to create array of images, then for each element IMAQ Create should be called with different name, otherwise all elements referred to the same image. For example, if IMAQ Dispose will be called for the first elementh of the array, then other 9 images will be automatically invalid.
Compare two code snippets below:
Common recipe for solving troubles with resources - reduce your application step by step by isolating parts of the code with case structures until application will be stable. Then you will found part of code which caused memory leak.
best regards,
Andrey.

Memory Overflow cDAQ 9174

I running into an error (-200361) when I run my state diagram using a cDAQ 9174 chassis. I have a 9214 is slot 1, a 9237 in slot 2 and, 9207 in slot 4. I have tried a couple of workarounds to get this VI to work, but I have not yet been able to figure it out. I have a hard time believing this is hardware related and am thoroughly convinced it is because of the way I have wired this VI together. I have looked at all the links provided in all of the responses I could find to similar problems without resolution. What data is being written so fast that the processor is unable to keep up? See the attached VI.
Solved!
Go to Solution.

I made the above mentioned changes, cleaned up some unecessary/repeated functions and am now faced with lossy data. You can see in the attached picture, every few seconds or so the data reports zero. What is happening that is causing this?
Attachments:
LossyData.jpg ‏356 KB
ThermistorStateMachine.vi ‏129 KB

Flash lite and Memory

Hi everyone,
I am loading 4 xmls in my application whose size is not more
than 200 KB. My application is 75 KB.
I am loading these xmls into their respective arrays. I
tested this application on E51 and it is installed on memory card.
When I am manpulating the array contents and send this
content to the server sometimes I am getting memory overflow error.
I have kept track of the memory which I noticed at one point
of time exceeds 2 MB and overflow error occurs.
I tried freeing the xml objects using <xmlObject>=null
after loading the contents into respective arrays, but still the
memory freed is very little.
How do I solve this issue?
Moreover the static and dynamic heap memory for flash lite
applications varies from device to device. Is there any way to
extend the memory or use virtual memory sort of thing when the
application is installed in memory card instead of phone memory
itself.

Hi Alex,
I am not "from" Adobe but I have been playing with FL for a
while and I am an ACE. For a Qualcomm specific question you may
want to try thte qualcomm forums (
http://brewforums.qualcomm.com/)
but in the meantime, I can at least tell you what has been working
for me.
Add the code used here to you movie (but remember that adding
this debugger will add to the memory load)::
I hope that helped. The biggest message—test on your
device **(but suprissingly, the numbers on my Flash (not qualcomm)
emulator when targeting my exact device are the same as on the
device. Once it gets below 70% the device throws memory errors.
Also, make sure you do garbage collection (search term in FL help
file) otherwise as your program stays on it could throw errors.
(i.e. After 20 minutes the device could throw a memory error but
not right away. This actually happend to me.).
*p.s. Obviously functions require FL 2.0 and not 1.1, but we
are in the BREW forum. To be backwards compatable to FL 1.1 you
would need a frames based method to measure time.
Best,

Internal error: "memory.cpp", line 593 with PXI 8175

Hi,
I have created a program with Labview RT 7.0 which makes acquisition, storage and display of data with PXI controllers 8175.
I used Datasocket for the data display on a deported computer.
Because of the number of the Datasocket tags used, instead of sending values all the time, I'm sending value for the deported computer only if the user needs to see it.
For example : if the user needs to see data, so only Datasocket tags for data display will be active, and if the user needs to see parameters values, so only parameters datasockets tags will be active. And, if the display program is in "standby" mode, almost all datasocket aren't active.
So when the user needs to see data values, he opens the data values window of the display program, and then, the datasockets tags for data value are now active, but : sometimes at this moment, the PXI stops with an "internal error "memory.cpp" line 593"!
The only solution is to manually reboot the PXI, the programmatically reboot doesn't work in this case of error. But it is far away from the displaying computer.
The error happens regularly after a 2 weeks period of standby. So I though about a memory overflow, I checked all the arrays, and none of them is growing to the infinity.
If someone knows about this problem, I will be very happy to learn about how to get rid of it!!!
Best Regards,
G Liagre
Best regards,
G Liagre

Hi Rob, Hi Matthieu,
Thank you for your reply.
I found in the database many reply about this error, but none of them were helpfull for me.
I tryed your link to the knowledge data base, but the error described there is for dll association in LabView and interface nodes.
I didn't used any interface node in my code.
The problem is that I cannot test my program on the PXI because I don't have access to it rightnow (only by remote desktop, and with a 56k modem..)
Let me give you a part of this huge code.
I suspect this part of the code to be the one which create the problem, but it's not sure.
If you find something obviously wrong, tell me!
Best regards,
G Liagre
Best regards,
G Liagre
Attachments:
Communication.zip ‏931 KB

How can I prevent a memory flow error from occuring when using 3D contour plots?

After displaying a single contour plot a number of times, LabVIEW crashes and reports a memory overflow error. I only load a single 2D array, never storing previouls ones. I always index the data for contour plot 0, and don't explicitly store multiple 2D arrays in any buffer, such as appending data to a shift register. There appears to be some sort of memory leak in LV when using this feature. Is there a programatic way to flush the stored data in a contour plot prior to displaying the next 2D array of data?

Hello MicTomReiSr,
Is this in the LabVIEW development environment? Are you making changes to the code and then running the VI? Does the plot contain default data? Is the indicator cleared when the program stops? The Plot Clean Data method may be what you're looking for.
Remember that the development environment maintains an undo history of the changes you've made, and copies both the block diagram and FP contents each time. If you have a lot of data displayed on the front panel you end up copying it multiple times. This isn't a problem unless you're actively editing the VI in question.
If you do need to edit and run the VI at the same time (perfectly reasonable, although you might want to consider a 64-bit installation or more RAM if you commonly work with resource-intensive data types like 3D plots) try reducing the Undo history length (Tools>>Options), although be aware that you won't be able to back up as many steps.
Regards,
Tom L.

Web Intelligence server memory is full

Hi All,
We are facing an issue with Webi Intelligence document. Below are the details and our finding from different environments.
Problem in Production: When user runs the Webi report from Infoview, Report is coming as blank even though there is data,
Findings in production:
1. Checked on BW server transaction code ST22 it has session time out.
2. Switched on the trace and did MDX test using MDX query, even that is timed out.
Environment: BOXI3.1 RTM, Windows server, Web Intelligence and BI 7.0
When we are trying to run the same report from QA we are getting the following error u201CWeb Intelligence Server memory is fullu201D
Findings in QA:
1. When user is running the report from Infoview web Intelligence server memory is reaching 1.6GB and is getting hanged.
2. Checked on BW server transaction code ST22 it has session time out.
3. Switched on the trace and did MDX test using MDX query, it is running fine.
Environment: BOXI3.1 and Fix pack 1.3, Windows server, Web Intelligence and BI 7.0
Universe is built on BEX Query and it is running fine both in QA and Production environments.
I would really appreciate your help.
Thanks
Sudha.

Based on this :
2. Checked on BW server transaction code ST22 it has session time out.
3. Switched on the trace and did MDX test using MDX query, it is running fine.
The issue is outside of BO, but with BW query you're using - it returns too much data causing memory overflow and timeouts.
Optimize BW query !!
Also, upgrade to XI3.1 Sp2 Fp2.5 and latest servise pack for BW to resolve some of the issues with large queries that exist on your patch level.

Memory Overflow

Similar Messages

Maybe you are looking for