Memory slowly drops throughout the day

if i turn the phone off and take the battery out. then start afresh i have around 20 mg memory free. then throughout the day after using programs (i always quit them afterwards) the momory can drop down to as low as 6 mb by the end of the day, even with no apps open. i have handy taskman but cant seem to find anyway to restore the ram without turning the phone off again. any help
also can everyone tell me how many mb free you have after reseting the battery.

Which phone do you have?
It's probably a memory leak issue which may have been corrected in a later firmware update.

Similar Messages

IChat just drops throughout the day. Solutions?

I'm running iChat 3.1 (v417), using an AIM account. I'm on 10.3.4, a G5 2Ghz, and 2.5G Ram.
I chat all day, do audio, video, even 4-way video conferencing. But about 6 times a day, iChat's connection stops, and I get a window saying that iChat is not connected. During that time, both Safari and Entourage continue to work and stay connected.
Per Apple's site's directions, we have opened up the ports 5060 to 5353 as well as 16384-16403.
If anyone has ideas, please pass them on! Thanks much.

Hi Ralph,
We're on a cable modem, and the G5 is wired into a brand new Linksys router. We have the G5 set to a static IP, so it doesn't change.
I'm not that familiar with the settings in a router, but I do wonder if some setting could be tweaked that would make iChat more stable.

On my iPhone 5, the battery symbol and percentage won't change, even while charging or during usage throughout the day. The battery is however charging and draining properly from what I can tell.

On my iPhone 5, the battery symbol and percentage won't change, even while charging or during usage throughout the day. The battery is however charging and draining properly from what I can tell.
Has anyone had this issue or know of a fix?
Thanks

Try this
Restart iPhone: Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for phone to restart (no data will be lost).
Using the phone while charging doesn't create a problem.. I do it all the time

TS2784 I have set my iphone5 time settings to automatic New York time. Throughout the day the clock keeps changing times on its own by hours. Sometimes in is correct. Sometimes it is wrong.

I have set my iphone5 time settings to automatic at New York time. Throughout the day the date and time on the phone keeps changing on its own and often by a few hours. Sometimes it goes to the correct time. Sometimes it is way out. Is there something wrong with my settings?

This is a known issue with the iPhone 5. Turn off the automatic time setting for the time being. It will most likely be corrected in an upcoming update to iOS if the tech press is to be believed.

Is it okay to plug in and unplug the iPad Air throughout the day?

I did this with my iPad two and never really had issues but I would like to prolong the life of my new battery as much as possible. Is it okay to plug it to charge it for short bursts at a time throughout the day?

DavetheDog wrote:
I figured that was the case and I've always done it with my phones as well. I just figured I would ask around. Really what I'm concerned about it is, for example: using it to about 85% and then charging it to maybe around 93% and then unplugging it. There are so many opinions about proper battery charging a few say it should be charged to 100% before unplugging. I'm just curious more than anything.
Those sorts of comments about charging are long pointless hold overs from the days of NiCad and nickle metal hydride rechargeable batteries. They simply have no relevance any more with smart Lithium polymer battery technology.
Plug and unplug at will - your Lithium polymer battery will not be adversely affected at all.

TS1702 can not download any program from the App and I can not update any program downloaded in advance .. Seems to me just to wait and remain so throughout the day .. I want a solution to this problem

can not download any program from the App and I can not update any programdownloaded in advance .. Seems to me just to wait and remain so throughout the day .. I want a solution to this problem

Any solution!!!!!!!

Passwords Required Throughout the Day

I am a new user of Wireless Extreme. I have my non-wireless iMac desktop connected and also use Wireless Extreme to connect a wireless PC laptop to the internet.
When I start my iMac in the morning, I am automatically connected to the internet - no sign on required. However, whenever my wireless PC laptop signs on, using a password, I am then asked to sign on my iMac desktop as well. I get the following message:
The Internet connection is currently in use by another computer ( 172.16.1.13 ). Enter your DSL Account logon password to switch the Internet connection to this computer.
Once I sign on my iMAc desktop, I get the following message:
This computer is currently connected to the Internet. Close (quit) your web browser and re-open it to use your EarthLink Internet connection.To allow any machine on your local network to access your Internet connection without entering the logon password, click "Release Connection" below.
This continues to happen throughout the day. The wireless PC also has to resign on to the network multiple times throughout the day. It seems that the iMac and wireless PC keep knocking one another off the internet connection. So my question is - is this the way Wireless Extreme is designed to operate or can I avoid the multiple signing on with both the wireless PC and my iMac desktop?
Thanks for your help.
Norb

You shouldn't have the problem of the 2 kicking each
other. If you go into the Airport Admin Utility and
under the Network tab, there should be a checkbox
that says Distribute IP addresses checked. If that
isn't checked, that is probably why the 2 computers
are fighting for the same main IP from your modem.
I made the change as you suggested, but still basically having the same problem. Either the wireless PC can use the internet or my non-wireless iMac desktop, but not both. In making the change you suggested, I noticed that I had three choices of the type of addressing I could use - 10.0.1.1, or 172.16.1.1, or 192.168.1.1. I don't know what these mean. 10.0.1.1 permits either computer, but not both to use the internet. I tried 172.16.1.1 and it locked out my iMac; I didn't try thr PC with this address scheme. There are other options available under networking, but I did not change them.

Horrible Speeds Throughout The Day

The download speed randonmly increases and decreases throughout the day, rarely reaching higher than 45 Mbps especially at night. Has been like this for about a month now and I'm concerned, because my provisioned speeds are supposed to be Blast speeds over 100 Mbps. Can someone please help me? Note: this speed test was taken directly connected to the modem (no router involved). The modem is one that is supported by Comcast for my provisioned speeds. http://results.speedtest.comcast.net/result/948865844.png

Hi Bombaypotato,
How are things with your connection now? Could you try running the BT Speed tester and posting back your results. You will need to run the "Further Diagnostics" once the first test completes.
Thanks
PaddyB
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Motorola Krave ZN4 keeps saying Verizon Wireless randomly throughout the day

I have a Motorla Krave ZN4 that keep saying Verizon Wireless randomly throughout the day since my daughter played with my phone. I can't figure out what she hit to cause this so I can make it stop.

nice one,, here I was looking at maybe the wall paper / background on display was removed and the standard Verizon Logo came back up as the default.. ... thank you . Snn5 will step back and let you handle.

BT Hub 5 speeds dramatically dropping by the day

Hi there,
I have a serious issue regarding my BT broadband service, I was sold BT infinity 1 with expected speeds of around 28-32mbps.
My Hub 5 was fitted on 6th December 2014 and all seemed fine at that time, when the engineer was here the speeds were around 37mbps (As if by magic!), but even after the engineer had left I was still getting speeds of around 30-32mbps which I was more than happy with.
Over the latter end of December I noticed that the speeds had dropped off to around 24-28mbps, but I just put this down to local traffic on the line due to the busy Christmas period.
Also in December I started to get periodically disconnected when using Xbox Live or Sky on demand services, again I know Xbox was suffering with hacking attacks and again it was a bust period so I just went with it.
Now on to January, I thought that the speeds would again pick up, but to my dismay this did not happen and speeds seemed to teeter around 22-25mbps, I was not to fussed with this as that is good enough for me to get by on, but the disconnections persisted too and often left me having to restart the Hub 5 to get back on again.
Then on Sunday 1st Jan, while I was using Sky on demand and Netflix I started to notice severe buffering issues, I decided to check my speeds again and was shocked to find them at 12mbps, this was just not fast enough to stream comfortably and this has now started to bother me as I often stream over the wireless network along with my kids watching youtube on the tablets.
I have been regularly checking my speeds using 'OOKLA' speedtest as I always do and I am beginning to get concerned over what I am seeing, speeds are still dropping by the day and I am currently only getting 9mbps, a far cry from what I have been getting previously and from what I have signed up for.
I have tried a few suggested tips, like changing the channel for wi-fi, splitting 2.4 and 5ghz for better connections with certain devices, resetting to factory defaults, restarting the hub, but nothing is working and I am worried that at this rate I will be down to 2-3mbps by the weekend and would have been better off with a cheap (non fibre) broadband.
I have had no new additions to the house regarding technology and nothing has changed structurally to have caused interference on these levels, I even turned off every single device in the house (Sky boxes included) apart from my phone today and then placed it next to the Hub 5 (1 foot away) still only attaining 9mbps, something is seriously amiss.
I have noticed a lot of talk about a new firmware that happened on 17/01/15, I have checked my hub was also updated on this date, could there be issues regarding the speed loss due to this firmware patch?
Also looking at the official BT speed check, my line shows no issues and no work is currently going on in my area that I am aware of.
I have heard that regularly restarting the hub may then result in it sending an error message back to BT to raise an issue and this itself can impair the performance, I have been advised to let it settle for 10 days without rebooting it.
I feel at the moment that I am paying for something that I cannot actually use reliably enough to make it worth while and if this persists and I cannot find a resolution I may have to seek advice for terminating my contract early on terms of being mis-sold a product.
I would greatly appreciate any help or suggestions that you guys can offer me and I will be especially interested to hear what the official BT representatives reasons or excuses for this are.

RoyceRichards72 wrote:
If this is the issue, and that makes a lot of sense since there have been numerous disconnections since December, how do I get it uncapped again?
Do you know why there have been multiple disconnections?
Once the instability stops, DLM will automatically begin raising your speed.
If you found this post helpful, please click on the star on the left
If not, I'll try again

Firefox keeps crashing constantly throughout the day

Ever since my PC was reformatted and Firefox was installed, crashes have occurred throughout the day. First, Firefox goes into the "Not Responding" mode and then it will just crash! This happens constantly and it has become annoying and inconvenient. Here's the list of my last five crash reports:
bp-25891ba2-5077-49a4-8413-d30822141104 11/4/2014 11:11 AM
bp-7ae0b013-820b-4caf-8ebb-b962a2141104 11/4/2014 9:56 AM
bp-aac75e95-810c-4315-a311-4093b2141103 11/3/2014 5:33 PM
f4304127-7119-43d9-81de-e9eba4a75f58 11/3/2014 4:08 PM
bp-b6dfa154-23d8-49ec-8c0c-5bfba2141103 11/3/2014 3:06 PM
I hope someone can help me resolve this issue soon!
Thanks.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

HT1414 IT SEEMS LIKE EVER SINCE I UPDATED MY 4s TO THE OS 6 MY BATTERY LIFE HAS BEEN CUT WAY DOWN!!! I NEVER HAD TO CHARGE THE BATTERY THROUGHOUT THE DAY LIKE I AM NOW WITH THE OS6 UPDATE

IT SEEMS LIKE EVER SINCE I UPDATED MY 4S TO IOS 6 MY BATTERY LIFE IS NOT WHAT IT WAS BEFORE DURING THE DAY. I HAE TO PLACE IT ON THE CHARGER MANY TIMES THROUGHOUT THE DAY

Please stop shouting at us.
All caps indicates shouting, is considered rude, and is difficult to read.
Many will not read such posts.
Have you tried the bascis from the manual?
restart, reset, restore.
Have you checked your settings to make sure that you do not have something running that you do not want to run?

Increment value in a field but keeping it constant throughout the day

In a PRE-INSERT trigger on an application I have a problem
keeping the value in a field constant for the rest of the day
until the next day. The automatically generated number should
change only if the system date changes. How can i do this?.
The code is as below:
begin
                    update sequence_number
               set maxseqno = maxseqno + 1
                    where table_name
= 'ECONET';
begin
select maxseqno into :two.seqno from sequence_number
where table_name = 'ECONET';
end;
begin
select ltrim(to_char(:two.seqno,'00000000000000000009'))
into :two.line_number from sequence_number
where table_name = 'ECONET';
end;
begin
select ltrim(to_char(:two.seqno,'00000000000000000009'))
into :two.unique_transfer_batch from sequence_number
where table_name = 'ECONET';
end;
end;

The easist way is probably to store the date the sequence number
was last set, and then only increment the number if the date is
different.
If you just want a sequence number that changes once each a day,
an alternative might be to just calculate the number of days
since a particular date.
In oracle this would be something along the lines of
trunc(sysdate) - to_date('01-OCT-2001','DD-MON-YYYY') to give
the number of days since October 1st.

Printers will not stay online throughout the day in Windows 8.1

I am a systems administrator at a Law Firm and our managing partners request was to upgrade all of our attorneys to a device that will allow them to have a laptop and a tablet all-in-one. So I recommended Windows 8 ultrabooks. We ended up getting
a mix of HP Elitebook Revolve and Sony Vaio Duo 13 ultrabooks, both with docking stations so that attorneys can continue using there desktop mouse and keyboard and monitors while at work, but can also undock and use there ultrabooks remotely.
Everything is working fine except for printing for some reason through out the day printers will go offline for no apparent reason. We've got a billing program called Equitrac on our machines that will auto bill our clients when we print documents
for that them, I figured that there was an issue with that so I uninstalled Equitrac and the problem still happened. Group Policy deploys our printers so I disabled this policy and I've uninstalled the printer drivers and re-installed them to see if
that works and printers will stay online for a short period of time and then they'll go offline again.
For a temporary fix right now I'm having to restart the Print Spooler service and the printers will come back online again. This works for a few hours and then printers will go offline again. I witnessed one of the ultrabooks showing the printers
being online up until the point when the attorney pressed print and then all of them immediately went offline. This isn't an occurrence on just 1 machine but is happening on probably 50% to 60% of them.
Our support staff use the same printers on Windows 7 and they never go offline. Is there something else that I can check on these Windows 8.1 Ultrabooks or is there a bug that still needs to be fixed from Microsoft?

Hi,
Based on my search, I found a KB that relate with Printer offline, you can refer to its solution for test.
This problem occurs if the computer has the following registry value configured when you set the printer to the Offline status:
Key: HKEY_CURRENT_CONFIG\System\CurrentControlSet\Control\Print\Printers\<print queue name>
Value: PrinterOnLine
Data: 0
However, this value is not deleted by the Localspl.dll file when the print queue is deleted. Therefore, when you add a print queue that has the same name as the old print queue, the new printer queue inherits the Offline status of the deleted print queue.
To resolve this issue, right-click the new print queue in the Printers and Faxes tool, and then clear the Use Printer Offline setting. This resets the registry key to the correct value. Alternatively, you can delete the registry key that is mentioned in
the "Cause" section after you delete a print queue but before you add a new print queue of the same name.
If problem persists, please refer to the link below about How to Fix “Printer Offline” Error in Windows.
http://blog.vtechsquad.com/2013/05/02/how-to-fix-printer-offline-error-in-windows/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Roger Lu
TechNet Community Support

Why does my 4s shut off randomly throughout the day

My 4s has been shutting off randomly through out the day; this happen 3 - 6 times daily.....help

Most likely it's broken, but it MAY have a corrupt operating system. So try Restoring it using iTunes.

Memory slowly drops throughout the day

Similar Messages

Maybe you are looking for