Menubar is not updating based on active application.

Hi,I am using iMac with 10.7.4 mac os.My problem is menubar is not updating based on active application.And finder menu bar is appearing when i open the finder.And on thta time if i select "About my mac" or "Force quit" then that didn't give any response.At same time when i open any application like firefox or anything that finder menu bar is apper but not responding.And another probelm is at the time of login i entering the password and submitting,it's opening the desktop and again total screen will be becpme white and showing the activityindicator.Sp please tell me what's the main problem.And how can i solve these problems.

Try restarting your iMac in safe mode (holding down the shift key while restarting) then see if you have the problem.  If not then use disk utility to repair your permissions.  Take a look at this link, http://support.apple.com/kb/HT1452

Similar Messages

  • Change_connection does not update entire info about application

    The procedure change_connection does not update the entire info of the about application window. When I change my connection the connect string in the about application window still shows the old connection string.
    I added the line g_connect_string := get_application_property(CONNECT_STRING);
    to the procedure change_connection between the lines
    -- Reset user preference settings for new user connection
    qms$user_prefs.init;
    and the lines:
    -- The menu must be replaced because the new user might have other security privileges
    Now the connect string will change in the about window.

    Mark,
    This has been implemented in Headstart PATCH6530_for_6i and PATCH6530_for_9i.
    Regards,
    Marcel

  • Actual Cost not updating to Network Activity from CATS

    Dear All,
    Am back here for the expert suggestions / guidance.
    I am facing issue with respect to system not updating the actual cost in network activity / projects posted through time sheet i.e. CATS. I have planned my resource cost through work centre assigned with activity type, formula and cost centre. I have kept the employee master data in place with maintaining the 315 infotype. In CAT2 i am posting the respective time sheet on the particular network activity and am transferring the cost into projects by CAT5, the plan cost is getting updated but actuals are not hitting the projects.
    Kindly do the needful and suggest me if am missing something out of the track
    Thanks
    Praveen Mohanachary

    HI Gokul,
    There wasn't any error during confirmation and i have also checked in CN30 as well as COFC transaction. It is posting the time and the activity is getting the PCNF status set but there isn't any actuals posted. I used CATA for some activity and also used CAT5 for certain activity both are not posting actuals on projects.
    Thanks
    Praveen B M

  • Menubar Apps Not Updating

    I have Notify, a Gmail notifier, and Tweetie for Mac, a twitter client.
    A couple days ago they stopped updating. Notify doesn't notify me of new emails and when I check for them manually it doesn't update. The developer told me to delete my Google cookies, which didn't work.
    Tweetie doesn't load anything, my avatar, my updates, anything. I just emailed the developer so I'm not sure what to do about that.
    It's weird though because they're two different applications that stopped updating at about the same time. I have a last.fm scrobbler in my menubar too and that still works.
    Also, I have NewsFire, an RSS reader, and that updates completely fine.
    Anyone have any ideas? Thanks.

    Hello dylanthomas & welcome to discussions...
    Create a testUser account and load them there, one at a time, until something breaks - more than likely at least one of them isn't fully compatible w/Snow Leopard and you may have to weed out those culprits until/unless new versions surface.

  • IWeb not updating published status within application

    I'm having a strange iWeb problem that just started up within the last day or so. When I publish any of the sites within my domain (I have seven separate "sites" that are all part of the same domain file) the updates get published to my site, but the icons in iWeb do not change color back to blue. This happens whether I choose to publish changes or publish all.
    Another symptom of this problem is that my published site (http://www.adamreisinger.com) does not reflect the changes online until about five minutes after iWeb gives me the dialog box that my site has been successfully updated.
    The only thing I've changed on my system recently is applying the last round of software updates, including the iLife update. I've tried trashing the application preferences and the iWeb cache and re-publishing, as well as logging out and logging back into MobileMe within System Preferences.
    Any help in this matter would be greatly appreciated.

    Thanks for the suggestion. I tried the steps you outlined, and unfortunately the problem persists. Also, because the files were deleted from the Web folder the iDisk, iWeb is now under the impression that EVERY page has been modified, which has actually increased my publishing time.
    Some other troubleshooting steps I've taken to try and narrow down this problem:
    - I've tried publishing the domain from a newly created user account on the same computer (MBP running 10.6.2 and all latest updates applied)
    - I've tried copying the domain file to a different computer (one that has not had the latest iLife support update applied) and publishing from there
    - I've tried publishing to a different MobileMe account (a test account set up by Apple)
    - I deleted an entire site from the source list in iWeb (one that, fortunately, was not needed)
    After all these steps -- tried individually -- the issue persists.

  • Changes are not updated in Vistex BSP application

    Hi Friends,
    Iam working on VIstex BSP Applications. I have a problem with data update.
    I create a new Agreement Request using existing Agreement in BSP. In the Agreement Request I have different Rules and each Rule has some records in it. When I click on Save, initially all the records are alloted a temporary variable $$000000XX (XX is some number). After Save, from the Number Range object, these records are alloted permanent numbers. Up to here it works fine. When I go to any of the Rules tab and add a new record to that then this record is not saved properly. I mean when i go to the ECC (backend), it shows the newly added record, but when i click on the same tab again in BSP i could see in debugging, that
    the record still has a temporary number to it. So it always inserts a duplicate record in ECC.
    The issue is after i add a new record in BSP, Save the Agreement Request and come out of the transaction, then it saves properly. But when i add the record, Save and go the same tab again and change something to the newly added record, it is creating duplicates. And this is because it is not saving the record properly.
    Also if I just come out of the BSP page and load it again after clicking on save, the save is done properly and no duplicates are created if i modify the newly created record.
    Any suggestions to solve the issue will be appreciated.
    Thanks & Regards,
    Raju
    Edited by: Narayana Raju Sampathirao on Oct 6, 2009 3:02 AM

    Looks It's a Refresh issue part of BSP

  • Battery menubar status not updating

    Hello,
    My battery menubar status indicator does not change while my powerbook is plugged in. It will stay at the same charge % and the time remaining stays on "calculating".
    Any suggestions would be appreciated.
    Thank you

    I had the same issue, here are a few fixes:
    If you are using a non-native screen resolution on your machine, the software may refuse to run or identify your machine incorrectly. Please select your batteries maximum capacity manually in the Preferences window.
    Move"com.apple.PowerManagement.plist," located in Library/Preferences/SystemConfiguration to the trash. After removing this file, restart the machine.
    Mine came back, its out of whack right now... I will run it down and see if it is accurate after a full recharge.

  • Labview graph scale labels do not update

    I am using XScale.NameLbl.Text and YScale.NameLbl.Text graph properties to programmatically change the labels on the X & Y axis. It seems to work when I run the subVI containing the graph, but when the subVI is placed in an application, they do not update based on the plot data that is selected to be plotted.
    Attachments:
    WC3000_Histogram_Plots.vi ‏96 KB

    I think I understand your question. Your subvi has the waveform wired as an output. In the main vi that calls the subvi, you wire the output to a graph - correct? So you're looking for the graph properties in the subvi to be transfered to the main vi graph - correct?
    If this is correct - it doesn't work that way. The waveform is just a cluster of t0, deltat, and the y array of data. None of the graphs properties are passed out of the subvi.
    There are many ways to do what you're trying to do. You could wire the returned strings that you use for x and y labels as outputs of the subvi, then update the property node of the main vi graph. You could also pass a reference to the main vi graph to the subvi and make the x and y label changes to the main vi graph in
    the subvi. I think the first option is probably easier.
    Tim

  • Quality level not updated

    Hi QM Gurus,
    I am facing problem in quality level updation through Dynamic Modification rule.
    Setup:
    Plant level setting - Inspection lot completion - Skip lot and automatic UD time as
    1 minute.
    Material master - skips allowed and automatic ud masked for inspection type 01-Goods Receipt
    Dynamic modification rule created as 1st inspection stage - one lot needs to be inspected. 2nd inspection stage = two lots to be skipped. then again stage go to 1st stage.(Rule is at usage decision level)
    I have assigned the same Dynamic modification rule in inspection plan for respective material.
    While doing goods receipt (MIGO), first lot comes to inspection stock and 2nd and 3rd lot is skip lot. after 4th lot should come to inspection stock,but it is still skip the inspection.
    When i check Quality level for material "Inspection since change" field is not updating based on the DMR. Suppose 1 inspection completed in Skip stage, but the insp. since change is showing 0 only in the display quality level transaction QDL3.
    Please suggest some solution for this.
    thanks and regards
    murugesan

    Dear,
    Please refer these threads,
    Dynamic Modification Rule In Quality Module
    Re: Dynamic modification rule
    Regards,
    R.Brahmankar

  • Workflow Issue - Enterprise Portal based application not updating Notif.

    Hi,
    We have designed some workflows based on Adobe Interactive Forms.
    We have mapped the APPROVAL STEP to an Enterprise Portal Application(IsrFormApproval) through the SWFVISU txn.
    We had a requirement that the Supervisor can change the contents of the Adobe Form during Approval. But when we make these changes to the Adobe form before approval, these changes are not persistent. I mean, when I make changes to the Form, these changes are not getting reflected in further approvals.
    Can anyone help me out in these regards.
    The notification changes are not getting updated by this IsrFormApproval application.
    Regards,
    Raja Sekhar

    Hi Jocelyn,
    Thanks for the reply again.
    Yes, I checked my PC has the following ActiveX Controls in place.
    1)AcroIEHelper.dll
    2)AcroPDF.dll
    3)GbDetect.dll
    4)Pdfshell.dll
    I hope these are the only DLL's that should be there by default.
    Is there any specific Configuration to be done to ADOBE DOCUMENT SERVER for this feature to work alone.
    Can you let us know where should we mention the TEST OPTION in QISRSCENARIO txn.
    Yah,I maintained all the needed parameters as you said.
    I cant find any error message in workflow log and flow goes smoothly to the next level supervisor without persisting the changes done by first level supervisor.
    So,can you let us know clearly if <b>IsrFormApprove</b> application can really update the NOTIFICATION details at Supervisor Level.
    I will check the full cycle if WS50000041 today.
    Regards,
    Raja Sekhar

  • I've updated my Macbook Pro and my iMac with Maverick, updating the various apps. On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory, and it's based our Mail, the only app not updated. Ideas?

    Maverick and Your System message
    I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
    On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
    I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
    I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
    I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
    Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
    Any ideas?

    Maverick and Your System message
    I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
    On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
    I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
    I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
    I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
    Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
    Any ideas?

  • AD Group membership not updating in Sharepoint Foundation when adding Active Directory group to Sharepoint group

    I have Sharepoint Foundation installed with the latest CU updates.  It is running on a VMware box (Windows Server 2008 R2 Standard) with its backend on a SQL Server 2008 R2 vmware box.  The farm account is a domain user and has been given all appropriate
    replication rights, etc to active directory.
    Everything seems to be working fine except for security integrated with AD groups.  When I go to edit permissions I can add individual AD users just fine and remove them just fine and their access is taken away right away or given to them right away.
     I can also find AD groups in the people picker and add them to the site. When I add new groups to AD, they are found immediately within Sharepoint, and when I delete groups from AD, they are taken out of the people picker right away.  Now comes
    the weird part.  When I add an AD group to the site, all users currently within that AD group are given access to the Sharepoint Site.  This works for the first time only.  Now when I add or remove users from the AD groups, it does not update
    in SharePoint.  For example, I have an AD testuser1 in the AD Group "All Users".  testuser1 does not have access to SharePoint.  So I add  the AD group to the Sharepoint group "Visitors".  testuser1 now has read access to the sharepoint
    site.  Now, I remove testuser1 from the AD group, but testuser 1 still has access to the site even though he is not part of the AD group, nor does he have any individual permissions to the site.  Now, I add testuser2 to the ad group.  testuser2
    does not have access to the site, even though he is part of the ad group.
    It seems that the only time AD group security is working for me is when I first initially add the AD group to the site.  From then on, it's like sharepoint is caching the members of the group and not updating any new adds or deletes from the groups.
     Any ideas?  I am lost on where to go from here as I have tried everything from clearing cache files, rebooting servers, iisresets....

    I think I have at least cornered the problem, but am not 100% sure yet that it is the correct answer.  I think it could be 1 of the following 2 scenarios.
    Scenario 1:  We have 3 web applications setup on our web server ports 80 - Our sharepoint Web app, 2020 - Our My Site Web App, 2040 - Our Search Web app.  We are using host headers (http://sharepoint.***.com) instead of a server name.  So
    we setup our access mappings (Central Admin -> Application Management -> Configure Alternate access mappings) to use the host header (http://sharepoint.***.com) as the default mapping and the server name as the intranet access mapping.  By
    setting the default access mapping to host headers, i noticed that Sharepoint automatically assumes that all web apps are on port 80.  You can see this by going to (Central Admin -> Manage Web Applications).  The port listed all 3 web apps on
    port 80.  So I think when I was doing a profile sync and using mysites, it was messing with my AD security because of this.  What I did was the following.  I went to Central Admin -> Manage Service Applications -> [Name of your user profile
    service] -> Setup my sites.  I made sure that my preferred search center had the correct port number on it (mine originally had no port number), that my my site host had a port (again no port number originally), as well as the personal site location.
     I then saved this.
    Scenario 2:  Our user profile sync had 2 BDC connections that were corrupt and throwing errors.  I rebuilt the connections, remapped them to the proper user profile property.
    I did both of these scenarios above around the same time.  I then restarted all my servers, and at last the AD Group security is now functioning appropriately.  I have done multiple IIS resets and server restarts.  The issue has only reappeared
    once.  After restarting the machine again, we were back to the AD groups functioning correctly.  Because we had the issue reappear once after doing the above, I still do not feel 100% sure that either one of the above corrected the issue completely.
    As long as we are up and running currently, I am moving on to other tasks with this project.  My only concern that it will break again and I will have to revisit it is when we restart the servers....which is never fun.  I will update as I find
    a "true" answer to this issue....  Let me know if any of the above helped you or if you find something I may not have thought of.

  • Desktop application does not update

    My CC desktop application will not update to version 1.6.0.393.  I click on it to update, it downloads thru 100% and leaves the screen.  I can see disk activity and hear the cooling fan kick in but nothing happens.  After an hour or so I try to start the app from the desktop icon and the whole process starts again,
    Any help would be greatly appreciated.

    Link for Download & Install & Setup & Activation problems may help
    -Online Chat http://www.adobe.com/support/download-install/supportinfo/

  • Bug? Copy page within an application not updating everything

    We have a ApEx (Version 2.0.0.00.49) application, and it was decided to rearrange the pages to fit a better numbering scheme for maintenance purposes. Not a problem, as we copy each page to the new page number, then delete the old one. However, we found when this was done, the new pages were broken. Specifically:
    1. If you page contained a branch to itself the page number was not updated properly. For example, most of our pages have an "On Submit: After Processing (Unconditional)" branch back to the same page. This branch was created by the page creation wizard. After copying the page, the branch was not updated to the new page number, but rather still pointed to the old (now deleted) page.
    2. The reset page (Clear Cache for all items on pages) process source are not updated. If you have a process item for Clear Cache (we have one for the delete item process to refresh the report query). The Source Process item, which based upon what the wizards create, is the page number (or a list of page numbers). Again, since this is not update, the reset page process clears the cache for the old (now deleted) page.

    I don't think this is a bug. It is possible that you want to copy a page and retain information for branches and processes to the old page number. These are just a couple things that you'll need to change manually after a page copy.
    I guess the point is that when a page gets copied it's not always going to be obvious what needs to happen to things like branches and processes - so they'll need a little attention after copying to get them working properly again.
    Earl

  • Updates could not be installed because the application mail canceled restart

    updates could not be installed because the application mail canceled restartOS X 10.9.3 (13D65)

    Choose Force Quit from the Apple menu, select Mail, and press the Force Quit button. If that doesn't work, save and close everything you can and use the Activity Monitor in the /Applications/Utilities/ folder to force quit the loginwindow process.
    (111273)

Maybe you are looking for