Merging data from 2 columns into a single cell
How can I get 2 lines of data in one cell? I want to merge 2 columns, so that the data in the cell in one column fits under the data in the adjoining cell in the other column. If I just merge the cells, the column would make the spreadsheet to wide to fit on the page needed to print it on.
enaid,
Let's say you want to merge Col A and Col B into Col C, with the Col A text over the Col B text.
In Col C you would use: =A&CHAR(8232)&B
Don't forget to increase the row heights so you can see both lines in Col C.
Best regards,
Jerry
Similar Messages
-
Script to merge data from Numbers into Pages document, export as PDF and send via email
Hi,
I am wondering if it would be possible to achieve the following with an applescript:
1. Merge Names from Numbers into a multi-page Pages document.
2. Export each page of the resulting document as a PDF
3. Attach each of these PDFs to an email with specific text in the body of the email, setting the subject, the 'from' email address, as well as the 'to' email address from a field in the Numbers document.
4. Optionally send the emails automatically.
I would be glad to know if this is possible before I embark on trying to write such a script, and for any advice/script that would help me on my way.
Thanks,
NickThanks Bernard. Sorry if my original post wasn't that clear. I think you've pretty much got it in your paragraph starting "So, I think you're asking for", but will explain more in the hope that it will be clearer:
I have a Numbers table with 2 columns: Name and Email. I have say 50 people in this table and I need to email each person a version of a one page Pages document which would be identical except for their name.
The Name field is the only field that needs to be merged into the Pages document (one time only).
Once the merging has taken place the versions of the one page Pages document need to be exported as a PDF and attached to emails, one email from each person in the table in the Numbers document, with each email going to the email address corresponding to the name in the Numbers document.
The text in the email would be identical except for the name again. The text for the email body, subject as well as the 'from' field would be contained in the script (i.e. generated by the script).
It would also be good to have the option of sending the emails automatically or manually, so that I could check that the emails that are generated are correct before sending.
I hope that's clearer!
Nick -
Concatenation of Data from 4 infoobjects into a single cell in Bex Report
Hi,
I have loaded ODS with the description data. The source system for loading the ODS is the flat file. The ODS data should be a replica of the flat file.
In the flat file, there is a description field corresponding to a particular ID. This Description is greater than the standard 60 char length. So, I had to split the description while loading the flat file using single line routine in the Transfer Structure.
So, while loading different the data, I split the description field data from the flat file into 4 infoobjects and the flat file data was loaded into the ODS.
Now, from the reporting point of view, I need to display the entire description data from the 4 info-objects into a single cell in the Bex report.
Please suggest a solution for this.
<b>****Points will be awarded***</b>Hi Vineet,
Thanks for the response.
Could you please help me out with the VBA script(code) that needs to be written in the macro.
Thanks in Advance.
<i><b>****Points will be awarded****</b></i>
Regards,
Hitesh Shetty. -
Displaying data from multiple columns into a single line graph
Post Author: hollowmatrix
CA Forum: WebIntelligence Reporting
Hey,I have an issue with the WEBI reporting.I have a data source that has multiple columns say ( month1, month2, month3, month4,.....month 12, month 13, ....month24) with the sales data for each month.Now say I call the month 1 to month 12 as "current year", and call month 13 - month 24 as "previous year".I want to put a prompt in the report which allows me to select between "current year" and "previous year".Based on the prompt value we get a graph of the sales vs month ....as in if we select "current year", then we get a graph of the sales Vs time( remember that the sales data for each month is in a different column.)and if we select "previous year" then we get a graph of the sales Vs time for previous year..( sales vs time for Month 13, month 14, month 15....month 24).I am not able to pull data from multiple columns into a single object that I can use to populate the graphs.Any help on the same will be appreciated .Hi,
<p>
please click
here (asktom) and look for the words "how about the other way round"
</p> -
Merging data from 2 schemas with same object structure into one schema
Hi
I want to merge data from 2 schemas in different environments ( say test1 and test 2) into 1 schema ( say Test_final) for testing. Both these schemas are having same structure, the data can be same or different.
What I did is that I took an export of schema on Test1 and then import it into Test_final. Now I need to merge/append data from Test2 into Test_final.
I can not merge the data with import due to primary key constraints and also import doesnt support this feature, so I tried SQL*Loader to "append" the data by using sequence to generate Primary key.
But my worries are that since new primary keys are generated so foreign keys will become invalidated and the data will not be consistent.
Is there any other way to do this task..
Regards
RamanThis approach might be better...
create table test_final
as
select *
from schema1.test1
insert into test_final
select t2.* from schema2.test1 , test_final tf
where t2.pk != tf.pk
/...assuming duplicate primary keys mean duplicate records. If that assumption is not the case then you have a more complex data migration exercise on your hands and you need to figure out some rules to determine which version of the data takes precedence.
Cheers, APC -
Concatenate strings from a column into a single row
I am trying to string values from a column into a single row. I need a list of students (one row per student) with their phone number and they could have more than one number. I found a function that should do what I need but the syntax is for SQL Server, not SQL*Plus. I've tried several variations but can not come up with the correct syntax.
This is the SQL Server version:
CREATE FUNCTION dbo.GetPhoneList(@StudentID int)
RETURNS varchar(500) AS
BEGIN
DECLARE @StringList varchar(500)
SELECT @StringList = COALESCE(@StringList + ‘, ‘, ”) + Telephone.PhoneNumber
FROM Telephone t
WHERE t.StudentID = @StudentID
IF @StringList IS NULL
SET @StringList = ‘No Phone’
RETURN @StringList
END
SQL*Plus does not like the @ symbol, so I tried taking that out. I've put semi-colons where I think they should be, but I still get various error messages. Any suggestions?
Thanks.Hi,
What you want to do is called "String Aggregation"
You could write a PL/SQL funcrtion to do that for a specific column in a specific table, but [this page|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:2196162600402] has a couple of different generic solutions that will work on any tables and columns.
I recommend the first soluton, the user-defined function STRAGG, which you can copy from that page.
Once you have STRAGG installed, your query can be something like:
SELECT s.student_id
, NVL ( STRAGG (t.phone_number)
, 'No phone'
) AS phone_nums
FROM student s
LEFT OUTER JOIN telephone t ON s.student_id = t.student_id
GROUP BY s.student_id;On Oracle 10 (and up) you may have a similar function, WM_CONCAT (owned by WMSYS), already installed.
WM_CONCAT is not documented, so you may not want to use it in your Production applications.
It lokks like
Edited by: Frank Kulash on Feb 10, 2009 6:31 PM -
How do I merge 105 PDF's into a Single PFD?
How do I merge 105 pdf's into a single PDF.
I have already tried doing this in PREVIEW, selecting all, and then saving, and saving as. But it is for me, to no avail. When I re-open, all I get is the first page.
please help.CRB wrote:
How do I merge 105 pdf's into a single PDF.
I have already tried doing this in PREVIEW, selecting all, and then saving, and saving as. But it is for me, to no avail. When I re-open, all I get is the first page.
So, I'm not the only one unable to merge docs thru Preview.
This is why I wrote my own script to do that.
--[SCRIPT join_PDFs]
Enregistrer le script en tant que Script : join_PDFs.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:
aller au menu Scripts , puis choisir join_PDFs
Vous pouvez également enregistrer le script en tant qu'application.
Vous pourrez alors glisser déposer les icônes de PDFs à fusionner sur celle du script.
J'ai trouvé le code principal dans une page Web.
--=====
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
Sous 10.6.x,
aller dans le panneau "Général" du dialogue Préférences de l'Éditeur Applescript
puis cocher la case "Afficher le menu des scripts dans la barre des menus".
--=====
Save the script as a Script: join_PDFs.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:
go to the Scripts Menu, choose Numbers, then choose "join_PDFs"
You may also save the script as an application.
Then you will be anle to drag an drop PDFs icons on the script one.
I found the main code in a Web page.
--=====
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/01/18
--=====
on run
if parle_anglais() then
set les_fichiers to choose file "Select the PDFs files to merge" of type {"com.adobe.pdf"} with multiple selections allowed without invisibles
else
set les_fichiers to choose file "Sélectionner les fichiers PDFs à fusionner" of type {"com.adobe.pdf"} with multiple selections allowed without invisibles
end if
my main(les_fichiers)
end run
--=====
on open sel
my main(sel)
end open
--=====
on main(lesPDFs)
local p2s, alias_existe, aPath, chemindu_nouveauPDF, les_UNIXs
set lesPDFs to lesPDFs as list -- just for safe
set p2s to "" & (path to startup disk)
tell application "System Events" to set alias_existe to exists disk item (p2s & "joinPDF.py")
If it doesn't exist, create a symbolic link to a python script
delivered by Apple in an Automator process.
if not alias_existe then
set aPath to quoted form of "/System/Library/Automator/Combine PDF Pages.action/Contents/Resources/join.py"
do shell script "ln -s " & aPath & " joinPDF.py"
end if
set chemindu_nouveauPDF to "" & (path to documents folder) & (do shell script "date +_%Y%m%d-%H%M%S") & ".pdf"
set les_UNIXs to {}
repeat with i from 1 to count of lesPDFs
copy quoted form of POSIX path of item i of lesPDFs to end of les_UNIXs
end repeat
set les_UNIXs to my recolle(les_UNIXs, space)
do shell script "./joinPDF.py -o " & quoted form of POSIX path of chemindu_nouveauPDF & space & les_UNIXs
tell application "Finder" to open file chemindu_nouveauPDF
end main
--=====
on recolle(l, d)
local oTIDs, t
set oTIDs to AppleScript's text item delimiters
set AppleScript's text item delimiters to d
set t to l as text
set AppleScript's text item delimiters to oTIDs
return t
end recolle
--=====
on parle_anglais()
return (do shell script "defaults read 'Apple Global Domain' AppleLocale") does not start with "fr_"
end parle_anglais
--=====
--[/SCRIPT]
Yvan KOENIG (VALLAURIS, France) mardi 18 janvier 2011 12:24:51 -
Copy and Paste Multiple lines into a single cell
Folks:
I need to copy some plain text data into a single cell that has been merged with other cells to provider a larger unit; however, every time I copy and paste my data it gives me an error. In addition, if I paste the data into a single cell, the next line
of data inserts into the next row.
I understand that Alt+enter is a quick way to do what I want, but I already have the data typed out, and I do not want to type the data again.
Example: (If possible I want in one single cell)
Disks=32
Total space=1.74TB
Used space=1.20TB
Free space=0.54TB
Thank you!!!Is there any way to do this but keep the source formatting? I don't see any "Paste Special" options when you do it this way.
That is not possible - when you copy/paste this way, you only copy the plain text, not the formatting. You'll have to apply formatting to the cell with pasted lines from scratch.
Regards, Hans Vogelaar (http://www.eileenslounge.com) -
Upload data from excel into database through pl/sql
Hi All,
I have excel which contains data lets say employee details,
I have one upload button ,which is used to upload excel and then i want to map the cell of excel to the database column and through plsql code i want to upload the excel data into database.
In short ,i want to upload the data from excel into database using plsql code,
or suggest me any other way to do this.(except the data load method present in apex)
Thanks,
Jitendraif you use APEX 4 you can define you own table
the code below is for APEX 3
PROCEDURE pro_carga_planilla_prosp( p_archivo VARCHAR2) IS
v_blob_data BLOB;
v_blob_len NUMBER;
v_position NUMBER;
v_raw_chunk RAW(10000);
v_char CHAR(1);
c_chunk_len number := 1;
v_line VARCHAR2 (32767) := NULL;
v_data_array wwv_flow_global.vc_arr2;
v_rows number;
v_sr_no number := 1;
v_ok boolean := true;
v_local_ok BOOLEAN := TRUE;
v_reg_ok NUMBER := 0;
v_reg_ko NUMBER := 0;
v_localidad_id NUMBER;
v_departamento_id NUMBER;
v_cargo_id NUMBER;
v_prospecto_id NUMBER;
v_asesor_id NUMBER;
V_REG prospectos%rowtype;
BEGIN
-- Read data from wwv_flow_files</span>
select blob_content into v_blob_data
from wwv_flow_files
where name= p_archivo;
v_blob_len := dbms_lob.getlength(v_blob_data);
v_position := 1;
-- Read and convert binary to char</span>
WHILE ( v_position <= v_blob_len ) LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
-- pro_log('linea '||v_line);
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved </span>
IF v_char = CHR(10) THEN
-- Convert comma to : to use wwv_flow_utilities </span>
v_line := replace(REPLACE (v_line, ',', ':'), ';',':');
v_line := replace(replace(v_line, chr(10)),chr(13));
if substr(v_line,1,1)= ':' then
v_line := '0'||v_line;
end if;
if instr(v_line,':',1,21) = 0 then
if instr(v_line,':',1,20) = 0 then
v_line:=v_line||':';
end if;
v_line:=v_line||':';
end if;
-- pro_log(v_line);
-- Convert each column separated by : into array of data </span>
v_data_array := wwv_flow_utilities.string_to_table (v_line);
-- Insert data into target table </span>
IF v_data_array(1) IS NOT NULL AND
v_sr_no <> 1 THEN
V_REG.NOMBRE:=ltrim(rtrim(v_data_array(2)));
V_REG.RAZON_SOCIAL:=v_data_array(3);
V_REG.DIRECCION := v_data_array(4)||' '||v_data_array(5);
-- PRO_LOG('PROSP 1 ' ||v_sr_no);
v_localidad_id := pack_empresas.get_localidad(v_data_array(6));
-- PRO_LOG('PROSP 1.1 '||v_sr_no);
V_REG.LOCALIDAD_ID:=v_localidad_id;
-- PRO_LOG('PROSP 1.2 '||v_sr_no);
V_REG.CODIGO_POSTAL:=LTRIM(RTRIM(v_data_array(7)) );
-- PRO_LOG('PROSP 1.3 '||v_sr_no);
-- PRO_LOG('PROSP 1.1 '||v_sr_no);
v_departamento_id := pack_empresas.get_departamento(v_data_array(8));
-- PRO_LOG('PROSP 1.4 '||v_sr_no);
V_REG.DEPARTAMENTO_ID:=v_departamento_id;
-- PRO_LOG('PROSP 1.5 '||v_sr_no);
V_REG.TELEFONO:=v_data_array(9);
--PRO_LOG('PROSP 1.6 '||v_sr_no);
V_REG.TELEFONO2:=v_data_array(10);
-- PRO_LOG('PROSP 1.7 '||v_sr_no);
V_REG.RUBRO:=v_data_array(11);
-- PRO_LOG('PROSP 1.8 '||v_sr_no);
V_REG.RUC:=ltrim(rtrim(v_data_array(12)));
-- PRO_LOG('PROSP 1.9 '||v_sr_no);
-- pro_log(v_data_array(1));
-- pro_log(v_data_array(2));
V_REG.CANTIDAD_EMPLEADOS:=RTRIM(LTRIM(v_data_array(13)));
-- PRO_LOG('PROSP 1.10 '||v_sr_no);
-- pro_log(v_data_array(14));
V_REG.CANTIDAD_BENEFICIARIOS:=RTRIM(LTRIM(v_data_array(14)));
--PRO_LOG('PROSP 1.11 '||v_sr_no);
V_REG.MAIL:=v_data_array(19);
-- pro_log(V_REG.MAIL);
-- PRO_LOG('PROSP 1.12 '||v_sr_no);
-- v_data_array(20):= replace(replace(v_data_array(20),chr(10)),chr(13));
if not v_data_array.exists(20) then
-- pro_log('existe');
-- pro_log(ltrim(rtrim(replace(replace(v_data_array(20),chr(10)),chr(13)))));
V_REG.Proveedor:= ltrim(rtrim(replace(replace(v_data_array(20),chr(10)),chr(13))));
else
v_data_array(20):=null;
end if;
-- V_REG.PROVEEDOR:=v_data_array(20);
-- PRO_LOG('PROSP 1.13 '||v_sr_no);
if not v_data_array.exists(21) then
V_REG.OBSERVACIONES:=v_data_array(21);
else
v_data_array(21):=null;
end if;
-- PRO_LOG('PROSP 1.14 '||v_sr_no);
-- PRO_LOG('PROSP 1.2 '||v_sr_no);
insert into prospectos (nombre,razon_social, direccion,localidad_id,codigo_postal,
departamento_id, telefono, telefono2, rubro,ruc,cantidad_empleados,
cantidad_beneficiarios,mail,proveedor,observaciones)
values (nvl(ltrim(rtrim(v_data_array(2))),v_data_array(3)), v_data_array(3),
v_data_array(4)||' '||v_data_array(5),
v_localidad_id, LTRIM(RTRIM(v_data_array(7))),v_departamento_id, v_data_array(9),
v_data_array(10),v_data_array(11), ltrim(rtrim(v_data_array(12))), RTRIM(LTRIM(v_data_array(13))),
RTRIM(LTRIM(v_data_array(14))),v_data_array(19),v_data_array(20), v_data_array(21))
returning prospecto_id INTO v_prospecto_id;
-- PRO_LOG('PROSP 2');
v_cargo_id := pack_empresas.get_cargo(v_data_array(17));
-- PRO_LOG('PROSP 3');
insert into prospecto_contactos (prospecto_id,nombre,apellido,cargo_id,
telefono,mail)
values (v_prospecto_id, nvl(v_data_array(15),'S/N'), nvl(v_data_array(16),'S/A'),
v_cargo_id, v_data_array(18), v_data_array(19));
-- PRO_LOG('PROSP 4');
v_asesor_id := pack_empresas.get_asesor(v_data_array(1));
-- PRO_LOG('PROSP 5');
insert into asignaciones (prospecto_id,asesor_id,fecha_asignacion)
values (v_prospecto_id, v_asesor_id, trunc(sysdate));
-- PRO_LOG('PROSP 6');
END IF;
-- Clear out
v_line := NULL;
v_sr_no := v_sr_no + 1;
END IF;
END LOOP;
delete wwv_flow_files
where name= p_archivo;
END pro_carga_planilla_prosp;
function hex_to_decimal
--this function is based on one by Connor McDonald
--http://www.jlcomp.demon.co.uk/faq/base_convert.html
( p_hex_str in varchar2 ) return number
is
v_dec number;
v_hex varchar2(16) := '0123456789ABCDEF';
begin
v_dec := 0;
for indx in 1 .. length(p_hex_str)
loop
v_dec := v_dec * 16 + instr(v_hex,upper(substr(p_hex_str,indx,1)))-1;
end loop;
return v_dec;
end hex_to_decimal; -
Transform data from multiple sources to single target in bpel 10.13.1.0
Hi,
I need to transform data from mulitple sources to single target schema.
Please any one can give some idea.
Regards
janardhanWe are gone a other way merge multiple information into one target.
First we have created a wrapper variable with the structure of the target variable that we want use in the transformation.
With a assign element we filled the wrapper variable with information from the inputvariable of the bpel process and some addtional information.
Then we called in the transformation the wrapper variable as source and the target variable as target.
We have used that way in some bpel process and it works for us.
Within Oracle SOA Suite 11g, there is the mediator component that does simply routing
and transformation functionality within a composite (SCA).
That's all, I hope that help.
Michael -
Merging data from multiple BAPI tables
Hello,
I'm executing a BAPI_XX_GETLIST with multiple "Tables" selected with the REQUESTEDTABLESX import parameter. What is the best way to combine/merge data from multiple "Tables" and bind them into a single webdynpro UI Table?
Thanks.Hi,
Lets say the BAPI name is BAPI_XX_GETLIST and the table names are ET_TABLE1(Field1, Field2, Field3) and ET_TABLE2 (FieldA, FieldB). You have display the fields of ET_TABLE1 (Field1, Field2, Field3) and one field from ET_TABLE2 (FieldB). "FieldA" id the key field.
Create a value node (vnField) under the model node table ET_TABLE1 with cardinality 1:1. Create a value attribute (vaFieldB). For "vnField" create a supply function (supplyfunction). If you goto the implementation you can see a method "supplyVnField(IPrivateCO_ComponentName.IVnFieldNode node, IPrivateCO_ComponentName.IET_Table1Element parentElement)".
Write the following code in the implementation.
IPrivateCO_ComponentName.IVnFieldNode nodeX = node.createValueFieldElement();
for(int i=0;i<wdContext.nodeET_Table2().size();i++){
if(parentElement.getField3Value().equals(wdContext.nodeET_Table2().getET_Table2ElementAt(i).getFieldA())){
nodeX.setValuAttributeValue(wdContext.nodeET_Table2().getET_Table2ElementAt(i).getFieldB());
node.bind(nodeX);
Hope this solves your problem.
Regards,
Santhosh.C -
How do we retrieve data from SO10 into smart form?
Hello Experts,
Could you pls help me out in extracting data from SO10 into smartform.And how do we create a check box in a smartform(The check box should be always checked).
Thanks and Regards,
ShilpaHi Shilpa,
You can create Check Box using a Table with 1 cell only with border.
To get data from SO10 - standard text use:
CALL FUNCTION 'READ_TEXT'
EXPORTING
client = sy-mandt
id = ws_id
language = ws_language
name = ws_name
object = ws_object
TABLES
lines = i_tline1
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
Reward points if this helps.
Manish
Message was edited by: Manish Kumar -
How do I merge data from table1 on server 1 to final table on server 2 with a stored procedure to execute every so
many hours.How big is the table on server B? Is that possible to bring the all data into a server A and merge the data locally?
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
How do I merge data from table1 on server 1 to final table on server 2 with a stored procedure to execute every so many hours.
Hello,
If you had configure server2 as
linked server on the server1, you can run the following statement inside stored proceduce to copy table data. And then create a job to the run stored proceduce every 4 hours.
Insert Into Server2.Database2.dbo.Table2
(Cols)
Select Cols From Server1.Database1.dbo.Table1
Or you can use the SQL Server Import and Export Wizard to export the data from server1 to server2, save the SSIS package created by the wizard on the SQL Server, create a job to run the SSIS package.
Reference:http://technet.microsoft.com/en-us/library/ms141209.aspx
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
Importing Data from Excel into Primavera
Hello:
I'm trying to import data from an Excel spreadsheet of a given set of columns (i.e. template) into Primavera. I wish to copy the data from Excel into a new activity at the Activity Level and have set up the template already at the Activity Level.
It is easy to copy and paste data from Primavera into Excel, but it is not straight forward to copy Excel data into Primavera. I believe you have to import the data, but I do not know how to. Is there documentation somewhere that I can access, or is there someone who knows that can help?
Thanks.Hi,
You can control the activities that are exported with the user of a filter in the template options.
Go to Modify template options Add a new template or modify the existing
template. The template contains options for exchanging data with
Microsoft Excel or other spreadsheet applications. Click Modify to
customize the selected template
Select a Subject Area in the Modify Template dialog box to modify its
options. In the Columns tab, select the fields to export. The available
options are based on the selected subject area.
In the Modify Template dialog box, click the Filter tab to select the
activities you want to export for the selected subject area. If using more
than one filter, choose to show activities that meet all selection criteria in
each filter, or to show activities that must meet only one selection criteria
in each filter. Select the filter(s) to use for the export file. If necessary,
click Modify to edit the selected user-defined filter. The fields available for
filtering are based on the selected subject area.
Have a great day,
Saryn
Maybe you are looking for
-
My iPod Touch is freezing and rebooting itself.
Hi. Here's the story: My iPod was recently working yesterday. I left it on the wall charger for a while, and later I come back to find my iPod frozen, out of nowhere. For another while, it freezes and starts to reboot itself. I done all I can. I watc
-
Problem in creating DLL for a LabVIEW VI
Hi I am facing problems in creating DLL for a LabVIEW VI. Previously i had no problems in creating DLL for the VI that transmits a message from serial port to NI - PXI 7831-R Reconfigurable I/O card (configured by FPGA MOdule). When i try the same VI
-
[SOLVED]Anybody have DVB working in Totem 2.22?
Totem's YouTube browser works nicely here but I've had no joy at all trying to get it to play DVB-t. I have all of the necessities listed on the Totem project web page for DVB support: - A DVB-T card supported by Linux: 2 x KWorld DVB-t cards that
-
Print via Airprint with iPad 3 and Canon MG5350
Hi, I have a very common problem but none of the so far provided answers were suitable to help me. I use a new Canon MG5350 printer with WLAN and Airprint. The firmware has been updated to version 2 and nevertheless I cannot print via Airprint from m
-
Lion erase and reinstall by the Apple Store
Ok, I'll admit I'm a recent PC crossover so that qualifies me as a Newbie. Today I took my MacBook to the apple store for an erase and reinstall due to about 20gb of space was missing on my HD. My latest backup was done the day before I went back t